Can we update mseg table through badi mb-migo_badi or not???

Hi Experts
I had a requirement to add an additional tabstrip at the item level of MIGO transaction .
I have implmeented the same using MB_MIGO_BADI .
I have also added a field quantity on this tab.
The problem now is i'm not able to update this field in the MSEG table.
I have extended the MSEG table using append structures.
Regards,
Sunny

use this fm inside ur badi
J_1IEXGM_BADI_POST_DOCUMENT
also chk this thread
Re: MB_MIGO_BADI IMPLEMENTATION
кu03B1ятu03B9к
Edited by: kartik tarla on Mar 11, 2009 12:12 AM

Similar Messages

Updating HRP table through abap codes - is it correct

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
<b>For IT 1001 </b>
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

Updating HRP tables through abap code- is it correct?

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
For IT 1001
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

Updating two tables through JDBC

<b>Hai,
Can anybody please answer the following question?
How can I update two table in Receiver by using JDBC Adapter at receiver side from single source structure.
Thanks in advance.</b>

Hi ,
Create following structure for inbound data type to insert data in DB using JDBC receiver adapter here dbTableName1 is for first table and dbTableName2 for second table .
<StatementName2>
<dbTableName1 action="UPDATE_INSERT">
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2</col2>
</access>
<access>
<col1>val11</col1>
</access>
</dbTableName1>
<dbTableName2 action="UPDATE_INSERT">
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2</col2>
</access>
<access>
<col1>val11</col1>
</access>
</dbTableName2>
</StatementName2>
Thanks ,
Suvarna
pls award pts if it helps

How does SAP updates MKPF Table Through TCODE MB0A

Hello There,
how does SAP updates MKPF Table Through TCODE MB0A ( POST GOODS RECEIPT )? I tried to debug the same by posting GR, but could not figure out.
Awaiting Reply
Santosh

Hi ,
These are the table that are updated through the MB0A ,,
DGESV DMAEX DMAKT DMAPE
DMARM DMEAN DMKAL DMLAN
DPROW DQMAT DUNGV MARA
MARC MARD MBEW MFHM
MLGN MLGT MPGD MPOP MVKE,
MCHA, MCHB, MCHD.
Regards,
Bharani

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite. How can I just force it to allow me to RE-BUY the app again since I don't even have it to update, but I want it?
Currently, I even though I don't have the app, I am not given the option to buy, only to "update", and when I click on that it either hangs or it complains that it can't since my Apple ID is not associated with my account.

And it was your wife's Apple ID that was used to download and install the Yosemite you are using on this computer? If so then I suggest you need to contact Apple to get his straightened out.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

HT4623 Hi, I tried to update my iPad through iTunes but it did not work. I am trying to update to 5.0.

Hi, I tried to update my iPad through iTunes but it did not work. I am trying to update to 5.0. Thanks.

Originally it said that the process would take 76 minutes but after about 30 minutes there was no longer a message giving the status of the update.

I can't update icloud on replacement phone because ios is not correct version

I can't update icloud on replacement phone because ios is not correct version. Do I activate the phone as NEW?

Do you mean you can't restore your iCloud backup? If so, then set the phone up as new. Update iOS, then erase it and restore from your iCloud backup.
If that is not what you mean, then you need to explain further.

Updating Z table using BADI CUSTOMER_ADD_DATA_CS

Good morning guys,
I need to update some tables Z through some information that I put in a new tab. The problem is I do not know which method I should use.
If anyone can help me I appreciate it.

Lucas,
Just a thought -- BADI CUSTOMER_ADD_DATA_CS seems to be more at a screen flow level. Need caution while updating Z table here.
I would recommend using BADI CUSTOMER_ADD_DATA-CHECK_ALL_DATA/SAVE_DATA methods.
Method CHECK_ALL_DATA will be executed right before saving and has access to all tables which are ready to be updated. Final validations before updating Z tables can be performed here. Develop a FM to update Z table and call it in an UPDATE TASK in this method.
Thanks,
VM.

PL/SQL Trying to update a table through trigger on the same table

Hi everyone my name is Edwin and I'm new to this forum. I hope I can learn a lot from this community and over time contribute to it.
The problem I'm facing at the moment is a tough one. I need to update a table (table a) with a value called block_id. This block_id is generated by a procedure I have written myself, the end result is stored in another table (table b). This block_id needs to be generated after certain rows of table a get updated with a trans_id. The trans_id is all the same for these rows in table a, but the generated block_id isn't. In my code I use an after update on collumn a of table a trigger. So if the the collumn gets updated the trigger fires. The trigger calls the procedure that generates the block_id and the procedure generates table b with all the block_id's. But then I want to update the rows in table a with the generated block_id in table b. The problem is that this self-deadlocks.
You might think that this would call a recursive trigger, but I have written code in the trigger that checks if the block_id isn't allready filled in on table a.
Also I really need all the values wich get updated (table a), so I believe a before update is also out of the question.
And the first update of table a is done through an erp-packet and I can't get at that code, otherwise I would just have run my code from there.
Message was edited by:
user625855

CREATE OR REPLACE TRIGGER block_id_trigger AFTER UPDATE ON unload_details_tab
DECLARE
current_transport_id NUMBER;
check_value NUMBER;
check_block_id NUMBER;
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
current_transport_id := get_curent_trans_id; --function that gets the current transport_id
check_value := check_site_and_directive(current_transport_id); --function checks if this transport_id should have a block_id
check_block_id := check_for_block_id(current_transport_id); --function checks if there isn't allready a block_id set.
IF check_value = 1 AND check_block_id = 0 THEN
create_blok_id_table(current_transport_id); --this procedure creates the blok_id in temptable
UPDATE unload_details_tab a SET a.block_id = (SELECT DISTINCT b.blok_id FROM temptable b WHERE b.mark = a.mark_1) WHERE a.transport_id = current_transport_id; --this statement should update the table back, if I leave it out everything works fine, but when I leave it I get the self-deadlock error.
ELSE
null;
END IF;
END block_id_trigger;
Ok, I cleaned the code somewhat.
user625855

Update tracking number through : BADI ME_REQ_Posted

HI ALL,
greetings.
i had a query .
i have to update the table EBAN and update the field
tracking number(EBAN-BEDNR)at the line item level in the
TCODE : ME52N.
i have already generated a number through number range .and want to populate the tracking number and subsequently update table EBAN at SAVE Button of ME52n.
you can find the field tracking number at the line item under the tab contact person in the tcode me52n.
i would appreciate any help from ur side
thanks in advance.
Gaurav.

Hello Gaurav,
Try using user exit 005(EXIT_SAPLMEREQ_005) which is fired for each item. U can incorporate ur logic to generate the tracking number in this exit.

Error while updating lookup table through PSI

Hi,
I am trying to update a lookuptable through PSI using following code :
$lookupTableGuid = $svcPSProxy.ReadLookupTables($EPMTYString, 0 , 1033).LookupTables | where {$_.LT_NAME -eq $Lookuptablename}
$lookuptable = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 1 , 1033)
$lookuptablerowValues = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 0 , 1033).LookupTableTrees
#get lookup table count
$lookuptableValues = $svcPSProxy.ReadLookupTablesbyUids($lookupTableGuid.LT_UID, 0 , 1033).LookupTableTrees
$count = $lookuptableValues.Count +1
#Insert the rows of table in Lookup Table
foreach ($rows in $table)
$value_Code = $rows.Item("Project_code")
$value_Name = $rows.Item("project_desc")
$GUID = [System.Guid]::NewGuid()
$LookupRow = $lookuptable.LookupTableTrees.NewLookupTableTreesRow()
$LookupRow.LT_STRUCT_UID = $GUID
$LookupRow.LT_UID = $lookupTableGuid.LT_UID
$LookupRow.LT_VALUE_TEXT = $value_Code
$LookupRow.LT_VALUE_DESC = $value_Name
$LookupRow.LT_VALUE_SORT_INDEX = ($count ++)
$lookuptable.LookupTableTrees.AddLookupTableTreesRow($LookupRow)
$error.clear()
#Exceptions Handling :
Try
$svcPSProxy.UpdateLookupTables($lookuptable , 0 , 1 , 1033)
Catch
write-host "Error updating the Lookup table, see the error below:" -ForeGroundColor Red -BackGroundColor White
write-host "$error" -ForeGroundColor Red
Initially, I tried to run with value of $value_code as "AACL", the code worked.
But when I tried to insert value of code as "AACL - ALKYL AMINES CHEMICALS LIMITED"
I got following error:
Exception calling "UpdateLookupTables" with "4" argument(s): "Response is not well-formed XML."
I could not understand why this error is appearing as I just added ' - ' to my code value. I checked for validity of ' - 'in the targeted column. No issue with that.
Please help.
Thanks and regards,
Jayesh

Hi All,
The entries are maintained from DB level.
Thanks for the help.
DVRK

Update Mseg Table using MB_MIGO_BADI

Hi Experts
I had a requirement to add an additional tabstrip at the item level of MIGO transaction .
I have implmeented the same using MB_MIGO_BADI .
I have also added a field quantity on this tab.
The problem now is i'm not able to update this field in the MSEG table.
I have extended the MSEG table using append structures.
Regards,
Sunitha.
Edited by: sunitha j on Mar 1, 2009 2:34 PM

check whehter the added field is getting the data that you enter in the trnasaction in debug mode and whether the move of the data is happening...
Regards,
Sravan.

Can't update master table when creating a materialized view log.

Hi all,
I am facing a very strange issue when trying to update a table on which I have created a materialized view log (to enable downstream fast refresh of MV's). The database I am working on is 10.2.0.4. Here is my issue:
1. I can successfully update (via merge) a dimension table, call it TABLEA, with 100k updates. However when I create a materialized view log on TABLEA the merge statement hangs (I killed the query after leaving it to run for 8 hrs!). TABLEA has 11m records and has a number of indexes (bitmaps and btree) and constraints on it.
2. I then create a copy of TABLEA, call it TABLEB and re-created all the indexes and constraints that exist on TABLEA. I created a materialzied view log on TABLEB and ran the same update....the merge completed in under 5min!
The only difference between TABLEA and TABLEB is that the dimension TABLEA is referenced by a number of FACT tables (by FKs on the FACTS) however this surely should not cause a problem. I don't understand why the merge on TABLEA is not completing...even though it works fine on its copy TABLEB? I have tried rebuilding the indexes on TABLEA but this did not work.
Any help or ideas on this would be most appreciated.
Kind Regards
Mitesh
email: [email protected]

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

Updating Database table through Format Trigger in 10g Reports

Dear Users
I'm using 10g Reports Rel.2. I'm using a report column as a hyperlink using SRW.Set_Hyperlink. I've taken 2 actions through this hyperlink. 1stly I'm callin a report from this link n 2ndly I'm running an update statement after the hyperlink statement like below:
SRW.Set_Hyperlink('....');
Begin
Update table_name Set
column_name=value;
End;
So the 1st statement is running well i.e report is being called but update statement is not executing. I've tried this both in HTMLCSS and PDF formats but Update statement is not executing. I was doing the same job successfully in 6i reports behind a button (except that report was being called using Srw.Run_Report). Is there any thing different in 10g reports for this job ???

I'm using 'Update statement' behind the hyperlink in different situations for example I wish that a report should print only through a button or a hyperlink and its destination should be a printer. 2ndly I want to keep record of printed reports through updating a field against printed records in a table so that user should not be able to print a data again and again. I was doing this successfully in 6i behind a button but in 10g, report is being called through hyperlink but update statement below the report calling code does not execute.
Have u understood the situation

Can we update mseg table through badi mb-migo_badi or not???

Similar Messages

Maybe you are looking for