Can you assign MIDI instrument parameters as MIDI CC assignments (quantize, transposition, etc)?

Hello!
Is it possible to assign MIDI controller CC assignments in a way that will allow me to control the following Logic MIDI instrument parameters via knobs on my MIDI controller?
I would love to have control over the following parameters with whatever track or MIDI region is selected:
Quantize
Transposition
Velocity
Delay
My Akai LPD8 is begging me to be able to assign these parameters as CC events with the Akai LPD8 controller editor software.
It might seem silly, but being able to twist a knob to control toggling between these drop-down parameters would make for some intuitive, hands-on creative control while in performance/creation mode, or really as a means to audition different ideas. Why should these tools be only for tedious editing?
I understand that I wouldn't be able to record these event changes as MIDI automation data, but they would be great to get a feel of what I am looking for during creative sessions.
Anyone know if this is possible? I didn't see that it was obvious to do so, though I am just getting into mapping my custom controls with Logic.
Thanks so much!

Thanks for the reply....
I actually tried freezing the software instrument track and that had little if no effect on CPU. I then read in the book or somewhere that the freeze function really only works on effect plugins. Don't know if that's true in all cases, but that seems to be what's happening. Still would like to combine these tracks and I'm guessing I'm going to have to get creative with bussing or subgroups to make this happen. Unfortunately I think the fact that my Presonus board has hardmapped output routings for all the inputs makes that difficult, but haven't actually tried yet. I'm thinking if I can reroute the midi modules audio output input into the Presonus to a subgroup and then route the software instrument plug in to the same subgroup that I can then mix/capture this and hopefully route the audio's input to the subgroup to pick up the mix.
Does this make sense to anybody reading this?
We'll see and I'll post the results if it works....
thanks...b

Similar Messages

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Can you assign a keystroke to a hot corner?

Can you assign a keystroke to a hot corner?
For example, I want to assign option-D (toggles something in some app I use) to a hot corner.

This would be like executing any program with a combination of buttons. It's going to depend on your operaating system. My guess would be that most operating systems aren't going to make it easier to 'take over' keystrokes because that could interfere with the operation of some programs. For example, if you have MSWord up on your screen, it is quietly listening for a bunch of keys Alt-F, ctrl-x, crtl-o, ctrl-p....
You might be able to find some kind of program like this, but it's not going to be java specific.

Can you assign a Window grab or snapshot (Shift+Command+4) folder?

I am using ShiftCommand4 for capturing a picture of a window or section of the screen.
I was wondering if I can select a folder to save the pictures to. Where are the preferences for this feature?
Are there preferences? Can you assign a folder or do they have to go to the desktop.

When you save , it goes to the last location you saved to, so choose your folder, save a shot to there, and it will go to that folder next time.
Update
Francine Schwieder offers a solution in this topic.
http://discussions.apple.com/thread.jspa?messageID=2412150#2412150
You'll need to scroll down a bit.
regards roam
Message was edited by: roam

Can you tell me how to copy all staff assignments(structure) in one to anot

Dear Experts,
can you tell me how to copy all staff assignments(structure) in one organization unit to another organization unit ?
Looking forward to your reply.
Thanks in advance.
Best Regards,
Merry

RHCOPY00
use this report to copy the objects
even though if u are maintaint he staff assingments the same will be displayed in other types of the OM Module like expertmode simple maintainence etc the only thing is the method woudl be changeing

Can you assign a custom linescreen to a graphic?

Freehand used to let you assign a custom line screen to an object that would be different from the linescreen for the rest of the document.
For instance you could make one object print at 60 lines per inch when the other items printed 150 lpi.
I can find nothing in Illustrator that lets me do this. Am I missing it or is it not there?

barmsby wrote:
Thanks,
guess I will have to go back to an old copy of Freehand.
this feature is needed for some security measures when printing
checks and other documents not meant to be easily copied
barmsby
This has been in my opinion the thing that has been wrong with request for such feature request for tools that might be good for AI that are in other programs.
This is the first time that anyone of the former FH users ever stated a reason why this is needed and though checks are becoming obsolete there may be similar security that can be useful on the web.
It is a very good point you make and a useful tool for other purposes as well.
But there maybe even better approaches that would be more valuable for the ILlustrator user. such as
http://www.bittbox.com/illustrator/bb-special-3-ways-vector-halftones-from-raster-images/
there maybe others if you look for them.
Here is another
http://www.astutegraphics.com/products/phantasm/halftone-settings.html

Can you assign a channel on airport extreme to a particular device?

I have an ip phone hooked in to a network expander and when the channels switch the phone goes down

can you assign a channel on airport extreme to a particular device?
No, but you can assign a particular channel to all devices.

Can you assign the value of a jstl:out value to a jstl:set variable?

Basically can you do the following?
<jstl:set var="journeyVisit"
value="<jstl:out value=${journeyVisits.stopPoint.description} />" />
Basically we have our own independent markup language and I need to use our own href tag to wrap the 'journeyVisit' tag.
Any ideas?
Thanks.

<jstl:set var="journeyVisit" value="${journeyVisits.stopPoint.description} " />

Can you assign a max amount to Journals?

Does anyone know if you can set a Max Amount to Journal entries?
If so, can you take it one step further and limit the amount each user can journal?
Thanks,
Mike

No you cannot do that in the journal module or on posting.
You can only use validation rules (or logic by crossposting a value to some acocunt if a journal goes over a certain value) to for instance check and fail validation rules if journals (based on datasource for instance) are over a certain value.
Just some thoughts,
Edwin van Geel
SAP EMEA

Can you easily reverse effect parameters in Premiere CS4?

Suppose I have an elaborate effect, perhaps the ripple effect, then blur, then opacity fade out of text. The effect starts with the text showing normally then when it starts, the ripples, blur, and opacity start until the text is gone.
What would be nice, instead of having to reverse engineer these effects by doing them in the opposite direction, is there a way to save all of them as a preset but also apply them in reverse and then save THAT as a preset too? Many years ago (12 to be exact) in my tape days and when using Pinnacle Alladin, you could build an effect and then click a check mark and it instantly reversed everything.
Does Premiere CS4 have this?
Thanks.

Thanks for your reply. By "swapping the keyframes" I'm not really sure I understand what you mean. Can you explain please?
Thanks.

Can you offer me the parameters of DAQcard-6024E for biobench 1.0 Devinfo

I have downloaded the support file 'Devinfo', but my biobench 1.0 still can not get this new card. Can one offer me the parameters needed to add in Devinfo file?
(PS: the device ID of DAQcard-6024E is 91)

There were some DAQ and BB1.0 incompatibilities due to the way Biobench handled device numbers internally. The solution is to upgrade to BB 1.2 which works with all our DAQ boards.

Can you import software instruments and plug-ins from Logic Pro to GB

Hello,
I purchased Logic 7 Pro and I find it to be way too much for me. Is there a way to take the software instruments from Logic to GB? I am not even sure Logic comes with more software instruments than GB. Do they both rely on the Jam Packs for additional instruments.
Is there anything else GB can borrow from Logic. I know I can move the sound effects aif files and use them. Just wondering about other plug-ins and the like.
Thanks!!
Mac OS X (10.4.6)

Here's how you get past the static interruption.
Make your software track and ignore the static interruption. Its not being recorded into the midi information.
Then export the track out and reimport it to a new track. Do this twice. Your export/import WILL have static in it but since it was random your two tracks will not have the static in identical places.
Edit out the static in track one by replacing it with a static-less portion from track two. You'll now have a complete loop with no static interruption.
xs4sis. The cool thing about the demos is you don't have to program anything just use the presets. Who CAN program those **** synths anyway?
There are some demos that have a hundred presets to them. I love that!

Can you assign a customized menu in Java Desktop

I have a large number of users and I'm trying to customize a menu system when you click on "Launch". I need to create a menu that is unique for different users, so say group A can have one menu system and group B can have a different menu.
I've found info on adding items to a menu for all users, and for specific users one at a time if you log in as their user. In file browser, (applications-all-users:/// for all users, and just applications://// for an individual). But I have too many users which makes one at a time not feasible.
Is there any way to customize a menu setup, then assign that menu to groups instead of users? I'm running Solaris 10 with Java Desktop 3.
Thanks for the help.

Sounds like you might want to investigate the JDS Configuration Manager, it was designed to allow different desktop configurations for different groups of users. http://docs.sun.com/app/docs/coll/1221.1?l=en&q=java+desktop+system+configuration+manager

Can you assign a calendar event to multiple calendars?

Is there a way to assign a calendar event to multiple calendars? Example, I have a work trip I would like on my work calendar and my family calendar so it will show on my wife's calendar/phone. I would like to assign the event to two calendars instead of creating two events, one for each calendar.

In week or month view, you have to tap and hold down on the date until you see New Event appear. You have to select the month before you can add an event - as gas as I can see anyway. In other words, you cannot tap and hold down on a date in year view and go directly to that day.

Can you assign a default ring tone to a single Group (in 1 hit)?

Anyone know if you can assign the same ring tone to all members of a group WITHOUT having to go into each member of the group & do it 1 at a time? Thus you can have different ring tones for each group. You can do this on most other phones out there.

The error is in this line:
} else if (box 2 > box 1) {
The names of the variables are box2 and box1, without spaces.

Can you assign MIDI instrument parameters as MIDI CC assignments (quantize, transposition, etc)?

Similar Messages

Maybe you are looking for