Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0. When I assign the slide this action it shows a grey shape at the bottom hiding the playbar controls, but I would like to make that color white to blend in with the white background on my webpage. How do you change the color?

It is not possible to change the border color by an (advanced) action, sorry. If you do not mind, you could choose the white color for the bottom border from the start. When the playbar is showing, provided it it stretched, it will cover up this bottom border.
Lilybiri

Similar Messages

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

My iMovie voice recording is suddenly not working. As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured.

As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured. HELP!!!!

As far as I can see, it's random. Everything. Nothing makes any sense!
A the moment, the iPhone is playing music with the SIM card, but without anything plugged into it, but it's occasionally fading in and out.
Oh, and I doubt this is related, but about two months ago the iPhone failed to show that the battery was draining - it was stuck at 100%. This went on for a few days, it wouldn't even warn me at the 20% mark, it would just shut off. This happened for at least three full charges - I remember at one point it suddenly started working again at about the 70% mark, I'm not sure if it was alright after that or if it went glitchy on the next charge... but in any case, the problem mysteriously never reappeared after those few days.
Message was edited by: Shiranai

HT3775 I have an .avi file Quicktime is refusing to play, yet the information says Quicktime does play .avi files. Does anyone know what the problem is?

I have an .avi file Quicktime is refusing to play, yet the information says Quicktime does play .avi files. Does anyone know what the problem is?

AVI is a legacy file container originated by Microsoft back in 1992 and which has not been officially supported for more than a decade. Like the container, many of the codecs commonly used to create AVI content are also "legacy" compression formats most often supported on PC/Windows platforms. In fact, some codecs have never been transcoded for Mac use. Of those that have, many never made the transition to Mac OS X or the transition to Intel-based platforms. Those codecs that are still supported on the Mac can normally be found in the avi to quicktime converter available as an online download. While some common AVI compression formats may be supported by the QT X Player app, QT 7 currently provides a more compatible AVI playback environment for most "legacy" compression formats. If the codec(s) used in your AVI files are not supported by the avi to quicktime converter for QT use, you can try the VLC media player which may still support more esoteric compression formats. If VLC does not support the files, the normal approach is to discover which specific audio and/or video codecs were used to create the file and perform an Internet search to see if a compatible Mac component is available for download.

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

Unable to send email of photo in either a collection or in a HD Mac folder. The address is validated. Progress bar functions to end of "sending email" The "email not sent" Suggestions please.

Unable to send email of photo in either a collection or in a HD Mac folder. The address is validated. Progress bar functions to end of "sending email" The "email not sent" Suggestions please.

Hi,
According to your description, I find that there is a single user cannot send email.
I suggest using Outlook on Windows machine and sending emails via this single user to verify whether the emails can be sent.
If the single user can send email via Outlook on Windows machine, it seems an issue on the Mac side.
I suggest asking Outlook for Mac Forum for help so that we can get more professional suggestions.
For your convenience:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
If can't send emails in Outlook, it seems an issue on the single user side.
I suggest trying to access the single user's mailbox via OWA to verify whether the mailbox has been migrated completely.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

How to change the color of Data Markers in Bar chart

Hi All,
In OBIEE 11G, I have Bar chart with 4 measures, each measure is set to a color using Style properties of Graph. Now i want to change the color of the Data markers matching to the Bar color. Which means Bar and Data marker value should be set to same color.
Please guide me on this.
Thanks,
GJ

Here's a picture that may help in following Ian's instructions:
I clicked on a green column to select the series as shown.
Then this:
Turns into this and you can click Style:
SG

Changing the color of a registered trademark symbol in a logo and what is the the symbol's size?

I have a logo with the registered trademark symbol. I tried to change the color of the registered trademark symbol to the same color as the logo, using the color replacement tool but it did not work. Is there another way to change its color?
Also, I need to find out how big the registered trademark symbol is in comparison to the logo. (height, width, how far away from the logo the symbol is). How do I do this? Trying to use the Ruler tool was a disaster. As you've probably noticed, I'm very new to Photoshop.
thanks,

Depending on what colors you are working with adding a layer above the logo with the "color" layer style may work for you. This really only works if the logo is on white and the TM isn't black or white.
For Example:
Before
Paint (on a new layer) the new color
Change the layer style of that new green layer to "color"
And voila!
If you're working with a black or white TM you may just have to mask it out and make a new one with the text tool, I'm not aware of another way to change it (though I'm not the photoshop guru some of these people are =D)

My Macbook display changes color when I open applications. It looks like there is a light blue layer over the screen, thus changing the color of my display. This layer goes away when i quit the applications.

I am facing a problem and I am not sure if its a graphic card malfunction. When I open applications like Chrome, VLC player, and most apps, my display suddenly changes color. It is as though the Theme was changed. The normal grey panel on opened windows turns to light blue and everything else seem as though there is a light blue layer on top of it. When I close these applications (quit) the display returns to its normal self.
My MacBook Pro is 2 years old, and I have an extended warranty. Will Apple replace my graphic card if it is actuall the graphic card's problem?

I had that problem, too, and it's been documented both here and on the Adobe forums. What happens is that when you have dynamic switching on, when an application that uses your discrete GPU kicks in, the screen will change color. My problem lasted for a couple of weeks then just vanished.
What you need to do is download Cody Krieger's gfxCardStatus and turn off dynamic switching and leave your GPU set to discrete only. That's the only fix that I know of at this time. I don't know why it happens or why mine stopped.
Good luck,
Clinton

The document "test1" is on a volume that does not support permanent version storage. Your changes have been saved and you will not be able to access older versions of this document once you close it. To undo your changes, click Revert.

I have created share points on the mini mac server HD hard drive as we previously had issues with the server HD share points and security. This has all been working fine until recenrly and this error message keeps appearing evry time you want to save a document. Is it linked to the fact i have created a new folder on the HD drive and used that folder as a share point for all users to save to? Any help apprecisted thanks.

Great thank you. I assume I cant add a /.DocumentRevisions-V100 to the share point?
Would you mind explaining this issue also? I seems obvious but I just want to be certain. The error meassage reads;
The document "Chester" could not be autosaved. The file has been changed by another application.
Click Save Anyway to keep your changes and save the changes made by the other application as a version, or click Revert to keep the changes from the other application and save your changes as a version.
Does it mean another application as in another user on the SHARE POINT folder and the document "Chester" has opened this document ? Or does it mean another application as in pages and numbers? either way

The iPod on my iPad has frozen up. All I see is a picture of the album I was lasting playing. I have tried tapping all over the screen - nothing.

The iPod on my iPad has frozen up. All I see the picture of the last album I was listening to. I have tapped all over the screen and...nothing.

You need to restart your device. Press and hold both the home and lock buttons until the apple symbol shows up.

If you edit a photo in iPhoto, copy it to desktop, then back, will it have the "edits" saved?

i.e. will you be able to 'revert to original'. I ask because there are occasions when I wish to copy photos to back them up but then might rename an entire collection and wish to copy it back into iPhoto.

No.
I ask because there are occasions when I wish to copy photos to back them up but then might rename an entire collection and wish to copy it back into iPhoto.
I'm not sure what you're suggesting there as it doesn't seem to make a lot of sense. You can ename photos within iPhoto and the best way to back up is to back up the Library and not just the photos.

How do i fix the color of my screen from blacto white?, how do i fix the color of my screen from blacto white?

Hi,
When I was just playing around on my settings I hit a button and my screen turned a really dark color and when i take pictures it like the negative and also it's the same thing with the screen saver and the background, it looks like everything is negative on my IPod touch. If i do get on anything that you can scroll down with itt doesn't let me scroll down at all. So how can I fix that?

Go to Settings>General>Accessibility turn White on Black off.

TS1393 I cannot eject my iPod using either itunes or the eject button on bottom tool bar beacuse it says something is in use by another application or "The device 'generic volume' cannot be stopped because a program is still accessing it" Synced new iPad

How can I eject my ipod when neither itunes not the "safe to eject" button will allow it. Itunes says "...cannot be ejected because it contains files that are in use by another application." The safe to eject button says "The device 'generic volume' cannot be stopped because a program is still accessing it." The has never happened before. The only thing new is that I added an iPad yesterday. Thanks.

Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0

Similar Messages

Maybe you are looking for