Can you encrypt the rdlc xml file to keep someone from changing it?

this idea goes with my post on licensing reports. Is it possible to deploy an encrypted rdlc file and have custom SSRS pages that will decrypt it, run it, manage it, etc? We were thinking what is the point of custom SSRS pages for licensing if the rdlc is just a plain xml file any one can see, change, copy, etc.
thanks

I want to encrypt RDLC file too.

Similar Messages

How can you stabilize the text in firefox to keep it from defaulting every time you start firefox?

Every day that I access Mozilla Firefox I have to change the text size from the previous day on all of my websites. I have a windows 7 64-bit system.

It looks like your question posting duplicated: https://support.mozilla.org/questions/988040
please continue there

How can I get the directory.xml file for WL6.0?

I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?

aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM

How can I load the selected XML File (Selected from a Listview) into the correct Textboxes?

Right, so I have a windowsform with lots of Textboxes, where the user can type in Information, and then hit "Save", once its saved it goes into a sortof XML Format
<?xml version="1.0" encoding="utf-8"?>

<Case>
<Person>l<Driver></Driver><License-Holder></License-Holder><Address></Address><Phone></Phone><Date-of-Birth></Date-of-Birth><Registration></Registration>
Like that.
Now, on my Startup Form (The main form) there is a Listview that I gave the name Objectlist1. This list displays ANY file located in a specific folder on my computer. This is also where the Saved files appear.
The list also updates every 5th second so after you save it appears quickly.
Now, the Files are saved using the content or Value of the first Textbox:
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Firsttextbox.Text, settings)
So it appears in the folder and on the list with the value inserted in the first Textbox.
My problem comes when I want to load this back (Or reverse the function if you will)
Where I can go to the Objectlist1/Listview, either doubleclick a file or Mark a file, and hit my button "Retrieve"
I want the Form where you could input all the values to show - which it does
And the information from the XML/File saved to appear where it once was typed or inserted.
Here is an example of the code used to save the values from the Textboxes;
Private Sub Savebutton_Click(sender As Object, e As EventArgs) Handles Savebutton.Click
If IO.File.Exists(Pholderbox.Text) = False Then
Dim settings As New XmlWriterSettings()
settings.Indent = True
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Pholderbox.Text, settings)
With XmlWrt
' Write the Xml declaration.
.WriteStartDocument()
' CLIENT
' Write a comment.
.WriteComment("Database")
' Write the root element.
.WriteStartElement("Case")
' Start our first person.
.WriteStartElement("Person")
.WriteString(Textbox1.Text)
' The person nodes.
.WriteStartElement("Driver")
.WriteString(Textbox2.Text)
.WriteEndElement()
I've tried multiple codesamples but they all give either "XML Not found" or such Overloads.
This is the current code I used when trying to make it work
Private Function ReadSettingsXML(ByVal path As String) As MySettings # On Debug It marks here and tells me it wasn't found.
Dim thisSettingsInfo As New MySettings
If My.Computer.FileSystem.FileExists(Objectlist1.SelectedItems.ToString) Then
Dim settingsInfo = XElement.Load(Objectlist1.SelectedItems.ToString)
If settingsInfo IsNot Nothing Then
For Each mainGroup As XElement In settingsInfo.Elements
If mainGroup.Name = "<Database>" AndAlso mainGroup.HasElements Then
For Each subGroup As XElement In mainGroup.Elements
If subGroup.Name = "<Person>" Then
thisSettingsInfo.Textbox1 = subGroup.Value
ElseIf subGroup.Name = "<Driver>" Then
thisSettingsInfo.Textbox2 = subGroup.Value
ElseIf subGroup.Name = "<Address>" Then
thisSettingsInfo.Textbox3 = subGroup.Value
End If
Next
End If
Next
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file is corrupt and cannot be read.")
End If
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file could not be located.")
End If
Return thisSettingsInfo
End Function
Private Sub LoadXML_Click(sender As Object, e As EventArgs) Handles LoadXML.Click
Dim settings As New MySettings
settings = ReadSettingsXML(Objectlist1.SelectedItems.ToString)
If settings IsNot Nothing Then
Dim sb As New System.Text.StringBuilder
With settings
Caseworker.Textbox1.Text = .Person
Caseworker.Textbox2.Text = .Driver
Caseworker.Textbox3.Text = .Address
End With
End If
End Sub
Also, the "Caseworker" is the form where all the textboxes are located.
Been stuck on this for two working days, so any help is highly appreciated
Codesamples are also highly welcome so I can see what the heck you did and find and answer to my problems.

I found a code that might be close to what I'm looking, but as of this code used here, it looks for a static document that already exist and is located in the code.
See this one here, checks for the XML file, and since I can't link one program to 1 file, when its gonna have and use 100's of files.
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
While (document.Read())
Dim type = document.NodeType
'if node type was element
If (type = XmlNodeType.Element) Then
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
End If
End If
End While
Am I at least close here, people?
Can anyone help with the now critical issue I got?
I basically need to change these two;
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
To whatever value, so they read from the file SELECTED in my Listview
Cos the program saves files according to the info inserted in textboxes, so it can have whatever name you can think of, I need the program to "find and load" that file, once its selected, and then once I hit Retrieve or LOAD or whatever button, it
injects the info from the File to the correct Textboxes.
And I think this will work to get the info in the right boxes;
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
Any good advise? I'm stranded here.

Where can I find the config.xml file for my Edge project?

Or is that a nonsensical question?
Basically, I am producing a very simple iPad app using Edge and PhoneGap Build. It's all good to go apart from the orientation - I want to be able to lock it to portrait. On researching, it appears that I need to specify the web build/app as portrait in the config.xml file - so where would I find this?
Thanks!

I am not familiar with the phonegap process but I suspect the file you should be attempting to modify is called manifest.xml.
Example, see someone else's solution posted here. jQuery Mobile lock orientation - Stack Overflow
hth
Darrell

Can you encrypt a flash .as file?

I would like to know if there is any way to encrypt a flash
.as file to prevent code theft?
The products I've seen on the market so far seem to ony
encrypt swf files.
Thoughts?
Geetz Romo

On Sun, 27 Apr 2008 19:08:45 +0000 (UTC), "alanwallace4"
<[email protected]> wrote:
> So now my next question, If the .as file is embedded
into the .swf are
>decompilers able to generate the .as files when they
decompile the .swf?
I'd like to share my insights with you guys...
In general they can if you'll not take any actions to prevent
it. For
example this tool (
http://home.flashdig.com)
being a SWF editor, also
allows to protect any script without backward restoring.
Usual SWF
decompilers do not restore such protected script too. Of
course, it is
possible to investigate the SWF "under a microscope" :) and
find this
script manually. But it will be very dificult to do it in a
big SWF
file.
Another trick I ever saw was to use encryptor like RC4 or RC5
and
encrypt all your operators (do it somewhere outside of your
Flash
project) and then use a scheme like this:
//crypt string
cs = "qwertyasdfghjkl";
var cr = new ascrypt_RC4();
// here "blablabla1" is a result
// of encryption for "loadMovie" string
var lm = cr.decrypt('blablabla1', cs);
// here "blablabla2" is a result
// of encryption for "
http://..." string
var u = cr.decrypt('blablabla2', cs);
// here "blablabla3" is a result
// of encryption for "this" string
var t = cr.decrypt('blablabla3', cs);
t = eval(t); // getting "this" reference
// here is our encrypted action
t[lm](u); // it means "this.loadMovie(url)";
Doing that we achieve a result, when none of our meaningful
constants
(like URL's) as well as usual instructions will be ever seen
even if
SWF will be decompiled. Now let's imagin, that we're using
FLV
streaming and receive decryption key in the onMeta() data of
the FLV.
In this case decryption key will not be seen to the user,
because it
is not saved on the client computer. Of course, user can try
to stream
your FLV through a third-party client or hack the Flash
Player and get
the onMeta() structure. but you can prevent FLV streaming
without
preliminary user authorization. And don't forget to change
the locks
on your door frequently enough :)
Of course, you must have some knowledges about how AS
interpreter
works to write scripts like above. You must distinguish
variables
themself and their names. It's vital here.
HTH!

How can I retain the attached .pdf files (displayed as icons) from my word file 2010 to a pdf file?

Hi everybody,
I have looked for an answer in this forum ... without any good result.
I worked on a Word 2010 file with some attached pdf files. These attached files are displayed as icons on the word file. If you double click on them, you can consult them. This works very good.
Problem: I would like to convert this word 2010 file into a pdf file, which keeps the icons (linked to attached files) active. If I "pdf" this with my current system, icons are displayed as pictures: I cannot open the attached files.
My question is very simple: is it possible to retain these active icons (= to open attached documents) in a pdf file? Which adobe package should I use?
Many thanks for your help
cheers
elgreengo

No, it's not possible, but I agree it would be a very nice feature.

Can you disable the status bar on a web browser from an applet?

I have a signed applet and am using plugin 1.3.1_02 with IE 5.5. I use the showStatus("text") method to display pertinent information to the user in the browser's status bar.
Currently I see all types of messages being displayed (in IE's status bar) as my applet communicates with the server. I would like to restrict what is shown in the status bar to show my system messages only.
Can I filter what is displayed or disable status bar functionality programmatically from the applet? Or possibly with a browser/plugin setting?
Thanks

Hi,
I think you can do that with Java to JavaScript communication.
thanks,
Srinivas.

Can you use the shuffle feature within a created playlist from itunes?

Basically I would like to listen to a playlist on my ipod using the shuffle feature. I don't wish to hear the playlist in the same order everytime. Can this be done? If so, how?

Yes. Go to SETTINGS > SHUFFLE, and set it to SONGS. Then, go back, highlight the name of your playlist and press PLAY. It will play just that playlist, and it will be shuffled.
CHeers!
-Bryan

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

Anyone having a problem with the latest number software. Docs do not open Invalid. The index .xml file is missing?

I have been having problems since updating to the latest version of Numbers.
When I try to open files I am getting an error.
"The document “'13 Tax Prep .numbers” is invalid.
The index.xml file is missing."
Anyone else getting this message? Anyone know how to fix the issue?

Jeff Shenk wrote:
Numbers 3.1 can recognize both the new files without the index.xml file and the old ones with it, which it imports to the new format.
Agreed on that part. But take it a step further. If Numbers 3.1 is asked to open an old document that is still in the old Numbers 2 format that relies on an index.xml file but Numbers 3.1 can't find the index.xml file (perhaps the document is corrupted) then how can Numbers 3.1 open the document and interpret it in order to convert it to the new format? My guess is that this a possible trigger for the 'index.xml missing' error message.
Interesting link here on the new document format.
SG

How can I explore the folders and files on my phon...

How can I explore the folders and files on my phone from my phone (lumia 920)?

the file system including all the data pertaining to that partition is closed on windowsphone8, unlike that of Symbian.
the only part you will be able to see is what you would see in this post here: /t5/Nokia-Lumia/Transfer-file-for-920/m-p/1605954#M24335
the rest is locked unless you have developer access, and even then not much as you would just use the SDK to make your applications.

Can you disable the home button?

My Ipod will close apps and go to the home screen for no reason. Can you disable the home button/function to prevent this from happening?

http://nealbo.hubpages.com/hub/Recalibrate-Unresponsive-iPhone-Home-Button
Step 1: Open a stock iPhone app. e.g. Apples Stocks, Weather, SMS, Email etc.
Step 2: Press and hold the power button until the swipe to power off screen appears.
Step 3: Let go of the iPhone's power button
Step 4: Press and hold the iPhone's home button. Do not let go until the power off screen disappears.
And that's it, your home button is recalibrated and should hopefully now be more responsive.
This seemed to make it better, but not fixed.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

Can you encrypt the rdlc xml file to keep someone from changing it?

Similar Messages

Maybe you are looking for