Can you give a document link for script logic for NW version7??
Hi all,
who can give a document link for script logic for nw version7??
thanks in advance!!
Hi Sheldon,
I read through your "HOW to...Custom BADI for replicating Destination_App...." and it was great. However, Can this call also be used with WHEN/ENDWHEN statements? In the MS version, when using Destination_App, I was also able to map source accounts into the correct destination accounts as well as source E type dim to desination E type dim with the following script (the mapping to destination ID was stored as properties within the source dimensions).
*INCLUDE SYSTEM_CONSTANTS.LGL
*SELECT(%OPACCT%, "[ID]", "OPACCOUNT", " [TRF_FPA] = 'Y'")
*SKIP_DIM = COSTCTR
*ADD_DIM = BRANDS
*RENAME_DIM OPAccount = Account_F
*RENAME_DIM CATEGORY = CATEGORY_F
*RENAME_DIM ENTITY = MARKET
*RENAME_DIM DATASRC = DATATYPE
*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
*XDIM_MEMBERSET TIME = %TIME_SET%
*XDIM_MEMBERSET OPACCOUNT = %OPACCT%
*DESTINATION_APP = FPA
*CLEAR_DESTINATION
*DESTINATION OPACCOUNT = %OPACCT%
*DESTINATION TIME = %TIME_SET%
*DESTINATION CATEGORY = %CATEGORY_SET%
*DESTINATION CURRENCY = LC,USD
*WHEN ENTITY
*IS %ENTITY_SET%
*REC(ENTITY=COSTCTR.FPA_MKT,OPAccount=OPAccount.Consol_FPA)
*ENDWHEN
*COMMIT
I have tried the following code in the NW version, and it won't validate. Do you know if there's a way to achieve this?
*XDIM_MEMBERSET CATEGORY<>ACTUAL
*XDIM_MEMBERSET ACCOUNTHR =BASE_ANNL_SAL,BONUS,BENEFITS_TAX
*XDIM_MEMBERSET CURRENCY=LC
*START_BADI DAPP
DESTINATION_APP=CC_PLAN
RENAME_DIM="ACCOUNTHR=ACCOUNTCC"
WRITE=OFF
*END_BADI
*WHEN ACCOUNTHR
*IS "BASE_ANNL_SAL","BONUS","BENEFITS_TAX"
*REC(ACCOUNTCC=ACCOUNTHR.CCPLANACCT)
*ENDWHEN
Regards,
Karen
Similar Messages
-
I need to download firefox 3 can you give me a link to do so?
I just started working with ChaCha.com as a vetter and I need to download firefox 3. They say that version 3 is the only one that works with the program and I can't seem to find a link to do so. Pleas help.
Download the previous secure version from here: http://www.mozilla.com/en-US/firefox/all-older.html
-
My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.
this forum is made up of users like you, not apple employees. We can not help you with that kind of request.
-
Can you please update the link for the flash player standalone installer?
Can you please update the link for the flash player standalone installer?
Link: http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe
Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
Source: http://forums.adobe.com/thread/889580Dogs Key wrote:
Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
That is an old document (Flash Player 10.3) that shouldn't be there anymore. (The English document redirects to the link below.)
The download links for the offline installers for FP 11.2 are here http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment
I have updated the download links for FP 10.3 in http://forums.adobe.com/thread/889580 -
Hi anitha , i am working for mm module can you give detailed procedure
hi anitha ,
i am working for mm module can you give detailed procedure to me .
thanks
praveenHi,
1. MM Flow.
> goto T.C MM01.
> give material Number - some no.
give MAterial sector - Mechanical
give Material Type - Raw Material.
then goto ORg Levels on top.
then goto plant - 1000 n storage location - 0001
then select views.
in that select basic data 1, basic data 2, purchasing, general plant data storage / main..., Accounting 1 n then enter.
> Then give the materiual descripition
basic unit of measure KG
Mat group - 001.
click on purchasing n give mat no u have created n plant - 1000 n basic unit of measure KG n enter enter n enter.
then goto valuation class - 3000, P.C - S n moving price -100.
save then the mat no gets created.
> now go to TC XK01 ie, vendor master
give vendor - 126
comp code - 1000.
pur org - 1000.
Acc grp - 0001
enter
give title name - company.
search itenm 1/2 - M
then Rec ACc - 31000.
Cash Mang Grp - A1.
enter n enter.
order currency - INR
in control data click on GR- based info verf n click on ACK Req.
save n enter.
> goto TC ME 11 ie, purchasing info record.
Vendor - 126.
Mat no - the one u have created.
Pur org - 1000
plant - 1000
info rec-
select standard enter n enter.
in Period delay time give -10 n In conditions Net price - 100.enter In control Pur grp - 100.
enter n enter n enter for three times.
> goto ME01 source list.
Mat no - mat no u have created.
Plant - 1000.
enter fix the line.
give vlaid from , vend to , vendor as 126 p org as 1000, enter n save.
> TC code RFQ for request for quotation.
TC ME41.
RFQ type - AN
Lang Key -EN
RFQ date - any date.
QUAT Deadline - any date RFQ-
give purc org grp - 000
presss enter
coll no - RFQ1.
enter then give MAt no RFQ qnt as 100 ,O as KG del dat n netr.
goto header click on Vendor Add
vendor - 567
Title - company
enter.
the goto tc ME47
quotation.
give net price 100 enter.
then goto ME49.
give quotation no tht u have created coll rfq as RFQ1 vendor as 567 mat no u have created. n execute, back n back.
> goto tC ME51N for purc requisition.
click on header n give text as.
item as 10,SR as sur3, quant 100, del date, mat grp, plant n pur as 000
enter n save.
we will get purch req no...
now go to ME21N pur order.
click on Purchase/req no. click on value ur purh req no will be displayed there select it...
then goto Org data tab strip.
pur org - 1000.
Pur grp - 000
com code - 1000
enter
vendor - the one u have given...
enter n enter check n save.
then tc MIGO for goods receipt.
give pur order no u have created...
gotot quantity tabstrip n press enter give qty in unit of enrty as 80
goto pur org tabstrip n give del comp as set automatic.
click on item ok.
then continue n then post n continue.
then two documents will get created mat doc n acc doc.
then > MIRO invoice.
give vendor no - comp code invo date pur ord no.then select it n copy.
enter.
then we will get acc no n write it in the acc block.
the >MB1A ie goods issues.
mov type - 201
plant - 1000
stor loc - 0001
enter
cost cent - 1000
vendor - u have created
then give sc qty enter.
mat n acc doc r generated.
>MMBE stock overview.
give mat no - u have created.
plant - 1000
sto loc - 0001 n enter...
the MM get created...
Regard,
Priyanka. -
Mini 110 bios pasword problem Can you give me a Bios unlock code for CNU9443DVL
Can you give me a Bios unlock code for CNU9443DVL
Tnank you in advace
Branko
This question was solved.
View Solution.Welcome App. Try.
e 9 l o v v f t 6 k
Third letter lowercase L.
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
(268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?
Q<WSI-29> Can you give any performance benchmarks for WLS web services?
A<WSI-29>: It is very difficult to quantify performance aspects of web services
since they depend on so many variables including but not limited to: backend system
processing by stateless session beans and message driven beans, size of XML SOAP
message sent, system hardware (CPU speed, parallel processing, RAM speed) and
system software (JVM type and version of WebLogic server). However, let me point
out that the EJB backend processing of requests both have the best possible scalability
within the EJB2.0 specification (both stateless session and message driven beans
can be pooled) and servlets have a proven scalable track record. Thus it should
be possible to scale your web service deployment to meet demand. The overhead
in processing XML within the servlet can be significant depending on the size
of XML data (either as a parameter or a return type). While WLS6.1 does not have
any features to address this performance concern, WLS7.0 will feature Serializer
and Deserializer classes which can be dedicated to the XML to Java and Java to
XML translation (they can also be automatically be generated from a DTD, XML Schema
or regular JavaBean).
It is true that web services are not the fastest way to process client requests
but BEA is committed to making WebLogic server the fastest possible service provider.
Adamsee http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html
-
Can you give some of your products samples? it's for my project
Hi this is a student name Gama. I was wondering if you guys can give my some of your product sample for my Econ project because I'm doing a research of you company. This project is to choose your favorite company so I choose you guys because I love your company and its that i get to download apps like games and other stuff also music and movies which is the best part of this company. So please can you give a report or at least some of your product samples
Hello,
Just other users here like yourself, so Apple will not likely respond here, you need to contact them by other means. -
I'm interested in buying fcp x for OS 10.8.5. Can you send me a link as to where I can do this?
I can't update to mavericks or above as it does not support my server software which connects my media drives.
I'm new to f cp x as I use Adobe Creative Cloud usually but have a new edit file to amend
Many thanks in advance@Matt Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Worth a try.
@Innocentius: It might work because the OP is running Mountain Lion.
Russ -
Can you give some real-life use of tables in BW?
Hi,
In reading links and notes from here, I took a leap to try and understand how tables are used in the BW environment, by following:
se16
RSZ* then F4
then I Double click on:
i.
RSZRANGE Selection specification for an element
If execute, I get a table with a several fields with values.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
ii.
RSZOPRATOR Formula Operators
similarly, here I found fields with operators and mostly numbers.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
iii. Later I tried RSU* then
RSUPDDAT Update rules key figures
Nothing recognizable here about the update rules.
What is this table suppose to tell me and can you give me a real-life scenario where you made use of such a research to solve a problem?
iv.
Also, sometimes here conversations like, research on which tables have the fields you need and lets generate reports against them. I though tin BW, reports are always generated against data targets (ODS, Cubes, etc). I didnt know of tables.
Can you give a real-life scenario where you had to combine fields in 2 or 3 tables and use them in project?
ThanksAmanda,
There are many scenarios where you can use the tables behind the screen. But most of the times the scenarios are sophisticated requirement. Suppose your installation has many data targets and all are getting loaded nightly, weekly or even monthly intervals. Usually in most places the person on call will go and look at all the targets in the morning whether all the loads are successful (they would have beeped if something faild during loading at nights). Instead of going thru this manual process you can write an ABAP program which will look at the infocubes and ODS and see how many records were added, transferred, updated success or failure all kinds of information.
RSA1 is just a front end and all the information you see are all coming from tables which are stored here. go to SE80 or SE11 and search for the tables behind the screens. Every bit of detail that you see is coming from tables or available in tables. There are many tables and they are all relational. So you can pretty much do anything you like in accessing them. Please just read (SELECT) from them. Don't try to delete, insert anything unless you know what you are doing absolutely.
Hope this helps.
Good luck with your learning.
Alex. -
i have developed a application and package to jar file, and the application is connected to mysql database. If i want to execute the applicaion, i first install the jre, and then install the mysql database, is so trouble for client. Can you give me some advice that i can distrube the application to client and easy to run anywhere. Thanks!
G'day Bryanlwc.
There is a very nice sourceforge project called 'NSIS' which is a very elegent cross platform instalation scripting utility.
I first used NSIS to autodetect the version of Java, automaticaly install it if required, install mysql & mysqlcc automaticaly, install my java application (quite a few diff jars and dll's) and setup some services (i also use the sourceforge wrapper project).
I ended up removing all the autoinstalls because of problems with java and mysql. Some installs start up a seperate app, which caused sequencing issues when i installed the schema for MySQL.
Now I have a web page with a step by step guide to installing our app. The first page attempts to run a java applet that checks the version. It then provides info on whether to install the jre. The next step is for mysql and the final for the NSIS installation program.
Each step has a url to the program, and is structured for being burnt onto a cd-rom. The NSIS install generated program connects to MySQL and loads a sql file to generate the schema. Also it installs shortcuts for all users, uninstall exe to remove it all and so forth.
I have also created a upgrade script for NSIS which automaticaly shuts down the services running and does the install.
All in all, I cannot recommend NSIS enough. Btw it comes with some samples that show how to detect Java. Not complete in itself but will give you a starting point.
James. -
Can you give me some code ?
Can you give me some code ?
(my email address is [email protected])Please be specific in your request.
Try my SQL PlusPlus
It generates variety of SQL, PL/SQL and SQLPlus code
have a nice day,
regards,
M. Armaghan Saqib
* SQL PlusPlus: Add power to SQL Plus command line
* SQL Link for XL: Integrate XL with Oracle
* Oracle Developer Tutorial with Sample GL
Download free: http://www.geocities.com/armaghan/
-------------------------------------------- -
Can you giv me a brief introduction regarding selection screen with one eg:
Hello
can you giv me a brief introduction regarding selection screen with one eg:Hi Ranjith,
Selection Screens
Selection screens are one of the three types of screen in the R/3 System, along with dialog screens and lists. You use them whenever you want the user to enter either a single value for a field or fields, or to enter selection criteria.
Function
ABAP programs use screens to obtain input from users. The most general type of screen is a dialog screen, which you create using the ABAP Workbench tools Screen Painter and Menu Painter These tools allow you to create screens for data input and output. However, each of these screens requires its own flow logic.
Defining and Calling Selection Screens
You often use screens purely for data input . In these cases, you can use a selection screen. Selection screens provide a standardized user interface in the R/3 System. Users can enter both single values and complex selections. Input parameters are primarily used to control the program flow, while users can enter selection criteria to restrict the amount of data read from the database. You can create and save predefined sets of input values in the ABAP Editor for any selection screen. These are called variants. Texts on the selection screen are stored as language-specific selection texts in the program text elements. If you start an executable report using the SUBMIT statement, the input fields of the selection screen also serve as a data interface.
Defining and Calling Selection Screens
You define selection screens using ABAP statements in a program. Simple statements allow you to create input fields, checkboxes, and radio buttons, and design the screen layout. If you want to create a screen exclusively for data input, you do not need to create it using the normal dialog programming tools. When you create a selection screen, the system automatically assumes the tasks of the Screen Painter and Menu Painter.
The rules for calling and defining selection screens in ABAP programs depend on the program type:
· Executable program (type 1) without logical database
You can use a single standard selection screen and as many user-defined selection screens as you wish. The standard selection screen is called automatically when you start the program. User-defined selection screens, on the other hand, are called using the CALL SELECTION-SCREEN statement in a program. The standard selection screen always has the screen number 1000. User-defined selection screens can have any screen number except 1000.
· Executable program (type 1) with logical database
The standard selection screen for an executable program linked to a logical database is made up of the logical database selections and the program selections.
· Module pools (type M) and function modules (type F)
You can only use user-defined selection screens in module pools and function modules. These can have any number apart from 1000. You can only call a selection screen from a function module using the CALL SELECTION-SCREEN statement. You can also define selection screens as Subscreens and incorporate them in screens or tabstrip controls.
Hope this is useful.
regards
Ram
Message was edited by:
Ramanujan Chitrakootam -
Can anyone give me a link to an appropriate forum please?
Hi,
I use Premiere Elements 13 but I have a query regarding my Adobe Audition 3 - which of course is now well out of date.
Maybe it's just because I'm having a bad day - or have recently retired, but can anyone give me a link to an appropriate forum for this out of date but excellent software. You never know I might be lucky getting my query resolved! :-)
Thanks in advance anyone!Offul Duster
Please explore the following link for the Adobe Audition 3.0.1 and Earlier Forum
Audition 3.0.1 and earlier
Hope all is going well with your Premiere Elements 13 projects. Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates. If not, please consider doing so.
Best wishes with your Adobe Audition and Premiere Elements projects..
ATR -
can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?
All I can say is that I REALLY like my Touch 4th gen because I have all sorts of capabilities in a small form: e-mail, web browsing, news, weather, books, magazines, etc. etc. Plus lots and lots of apps out there, including so many free ones. I use the Cloud a lot so it's great to have everything sync'd to my MacBookPro (e-mail, Evernote, Pocket, etc.)
It would be easier, though, to do some of this, especially magazines, on the iPad mini, but, again, I love the small size of the Touch.
As for the 5th gen instead of the 4th, the fifth has Siri and the 3D feature in maps, which are great. And I'm sure it's a lot faster in iOS 6 than the 4th gen. And cool colors!
Don't know if this helps . . .
Maybe you are looking for
-
I rented a movie on my apple computer but it wont play on my apple tv. never had problems till 1 month ago. internet fine, home sharing on.
-
Hello, Please anyone help, my google search that is normally in top right of screen has vanished. I have tried 'View-Customise Toolbar' and can see that the search bar is there to move but is greyed out. I can add other buttons and functions just not
-
Is Zero is the Automatic Value for fast_start_mttr_target in ORacle10g
Dear Friends , I am working in Oracle 10g . In Oracle 9i the default value of fast_start_mttr_target is 600 . Now my question is : In Oracle10g , is the '0' value is automatic recovery activities for fast_start_mttr_target (i.e., fast_start_mttr_targ
-
Defining "prior-week" timeframe dynamically for scheduled reports
I have a number of reports that I need to execute each week. But, the scheduling options don't allow me to kick off the report on a Sunday AND constrain the timeframe to the prior week (Sunday-Saturday). I have a prompt built into the original que
-
CPUSPEED - which instruction is used for calculation?
Hi, http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_stats.htm#sthref6785 >> cpuspeed - average number of CPU cycles for each second, in millions, captured for the workload >> CPU cycle is described more in details at http://en.wikipe