Can you help me design my database?

Hi:
I am making a database with ms sql 2000 and then I want to
make the interface with CF7.
My problem is : I have some patient information. Each patient
can have many different cancers (up to 10 maximum).
What should I do? Make a Patient_Info table and a
Cancer1_table Cancer_2 table and so on? Or it is better I make a
cancer_all_table and then enter all the cancers in the table and
make a many-to-many relation and make it more complicated?
Do you know any the same application I can use the idea? It
is very important and emergent for me and it will be great if you
help me find the answer or show me the same schema/diagram on the
web. It will be great if you introduce me some application/software
or website I can use as my model
Thanks
Benign

Can a patient have more than one type of cancer?
If so, you'd want a Patient Table and a Cancer Table. Then
you would have a table to relate the two, maybe call it
Patient_Cancer_rel. This table would have only the Patient_ID and
the Cancer_ID in it.

Similar Messages

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

What is your WAN speed currently and projected WAN speed in the next 3 years?

I have a licence for CS design stand 4, but I need to reinstall, can you help?

I have a licence for CS design stand 4, but I need to reinstall, can you help?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Database 10g Passwords can you help

Hi All
Can you help!!!
I've downloaded the DB ok. However when it asks me to enter a authentic password which I do it comes back with the following message:
The SID you have specified already exists on this machine. Please specify a different SID.
Steve...

Can a patient have more than one type of cancer?
If so, you'd want a Patient Table and a Cancer Table. Then
you would have a table to relate the two, maybe call it
Patient_Cancer_rel. This table would have only the Patient_ID and
the Cancer_ID in it.

Yesterday, as today's deadline for filing tax returns approached, I was paralyzed by the inability to create new IRS PDF forms and to retrieve archived ones from a year ago. My computer went crazy. 24 hours later, I am still paralyzed. Can you help?

My computer went crazy yesterday on two occasions involving PDF documents. One dealt with attachments to an email from a bona fide corporation. The other dealt with IRS PDF forms & schedules needed for today's submission.
As both dealt with PDF and had nothing else in common, I suspected my PC had a virus. When I asked a local store technician, he agreed. I turned to Norton, which protects my PC from viruses, and after a few hours of really thorough searching, the computer was found to have no viruses.
Before describing what I call "crazy" computer behavior, you need to know that I have long had IE8 as my default browser but a few weeks ago switched to Mozilla Firefox because IE8 had beome incompatible with some websites from which I get information.
When I received the email from AT&T email service and clicked the first of four icons representing attachments, there was figuratively an explosion on my monitor: a series of new tabs, each called New Tab, burst onto the monitor--but no text or picture. The new tabs appeared faster than I coul kill them. I finally decided just to shut down the computer, hoping they would not reappear when I restarted. I was wrong. After 2 repeats, I decided to forget about the attachments and asked the sender to send them to me by regular mail.
That was no solution for my IRS PDFs. I wanted to complete filling in the various forms and schedules that I had begun months ago so that I could mail them today to the IRS (without having to copy them all in ink). When I tried to open the first one, BOOM. The same thing happened: the blizzard of New Tabs atop blank pages; my IRS form or schedule did not show up. Did the same shutdown/restart routine with the same results.
When I looked at the list of current forms that had to be completed, I noticed something very strange: the icons that began the listing of the documents' names were replaced one by one by Mozilla icons. When I moused over them, they said Firefox HTML. Why?
Starting the day today, I had the same experience. What's more, when I started to retrieve 2012 IRS PDFs from a year ago, the same New Tab tabs appeared and had to be killed, and Mozilla icons replaced whatever icon was there before.
Assuming that the problem arose with Adobe Reader's reading of the PDFs, I contacted Adobe but got no helpful phone number because PDFs are a free service and was directed to use this Forum to get help.
What do I have to do to (a) read and use PDFs in the normal way and (b) remove the Mozilla icon from those that have appeared on icon documents. If Mozilla is the source of the problem, shall I go back to IE8? (In my 80s, I want eventually to replace my old computer but for the time being I must continue using it. It will not take an IE9. Anther possible default browser would be Google Chrome, but I have unfavorable impressions of it because of its intrusiveness, loading my PC with stuff I do not need.
Can you help?

The problem is absolutely not Reader. The problem is that FireFox has stepped in front of Reader and handles all the PDF stuff - wrongly in your case. FireFox is DESIGNED to take over PDF files. But it is not capable of doing IRS forms!
To start with go back to IE for these forms. When you save them to disk DO NOT DOUBLE CLICK ON THEM until this is fixed. Just open the in the normal way - start Adobe Reader and use Open from the File menu.

Can you help me? I meet errors when I do incomplete recovery with RMAN

In recover step, There are following errors:
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
question:
1. Should I restore archive log files generated on July 16th back to orignal archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
The following is the detail information:
The database is ok when I try to do incomplete recovery database that was fully backed up on July,16th,2004. The database is oracle 8.1.7 and is in the archive mode:
The following is the backup script:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=db01,OB2BARLIST=ora8i_online)';
backup incremental level 0 filesperset 1
format 'ora8i_online<db01_%s:%t:%p>.dbf'
database
include current controlfile
archivelog all delete input;
I use it to do a full backup on July 16th,17th successfully.
And I use the following scripts to do incomplete recovery:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=ORACLE8,OB2APPNAME=db01)';
sql "alter database mount";
set until time ='17.07.2004';
restore database;
recover database;
sql "alter database open resetlogs";
sql "alter database open";
There script is successful in restore step. But there are some errors in recover step. The detail information is showing in following log:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: dev_0
RMAN-08500: channel dev_0: sid=13 devtype=SBT_TAPE
RMAN-08526: channel dev_0: HP OpenView OmniBack II A.04.10/176
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter database mount
RMAN-03023: executing command: sql
RMAN-03022: compiling command: set
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2056 set_stamp=531622798 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2180 set_stamp=531623409 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08523: restoring datafile 00001 to /d/db/oradata/db01/system01.dbf
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2180:531623409:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2212:531623994:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-03022: compiling command: recover
RMAN-03022: compiling command: recover(1)
RMAN-03022: compiling command: recover(2)
RMAN-03022: compiling command: recover(3)
RMAN-03023: executing command: recover(3)
RMAN-08054: starting media recovery
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
RMAN-08031: released channel: dev_1
RMAN-08031: released channel: dev_2
RMAN-08031: released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06003: ORACLE error from target database: ORA-01220: file based sort illegal before database is open
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 7220
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 5053
ORA-06512: at line 1
I repeat my questions:
1. Should I restore archive log files generated on July 16th back to original archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
Can you help me ? Thank you.

which o.s u are using i can't help you as i never worked on ver 8i,i can tell you incomplete recovery on oracle 9i on win 2000 server.
thanks : alok kumar

Can you help me? I meet some errors when I do incomplete recovery with RMAN

In recover step, There are following errors:
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
question:
1. Should I restore archive log files generated on July 16th back to orignal archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
The following is the detail information:
The database is ok when I try to do incomplete recovery database that was fully backed up on July,16th,2004. The database is oracle 8.1.7 and is in the archive mode:
The following is the backup script:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=db01,OB2BARLIST=ora8i_online)';
backup incremental level 0 filesperset 1
format 'ora8i_online<db01_%s:%t:%p>.dbf'
database
include current controlfile
archivelog all delete input;
I use it to do a full backup on July 16th,17th successfully.
And I use the following scripts to do incomplete recovery:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=ORACLE8,OB2APPNAME=db01)';
sql "alter database mount";
set until time ='17.07.2004';
restore database;
recover database;
sql "alter database open resetlogs";
sql "alter database open";
There script is successful in restore step. But there are some errors in recover step. The detail information is showing in following log:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: dev_0
RMAN-08500: channel dev_0: sid=13 devtype=SBT_TAPE
RMAN-08526: channel dev_0: HP OpenView OmniBack II A.04.10/176
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter database mount
RMAN-03023: executing command: sql
RMAN-03022: compiling command: set
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2056 set_stamp=531622798 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2180 set_stamp=531623409 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08523: restoring datafile 00001 to /d/db/oradata/db01/system01.dbf
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2180:531623409:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2212:531623994:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-03022: compiling command: recover
RMAN-03022: compiling command: recover(1)
RMAN-03022: compiling command: recover(2)
RMAN-03022: compiling command: recover(3)
RMAN-03023: executing command: recover(3)
RMAN-08054: starting media recovery
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
RMAN-08031: released channel: dev_1
RMAN-08031: released channel: dev_2
RMAN-08031: released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06003: ORACLE error from target database: ORA-01220: file based sort illegal before database is open
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 7220
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 5053
ORA-06512: at line 1
I repeat my questions:
1. Should I restore archive log files generated on July 16th back to original archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
Can you help me ? Thank you.

You are correct. In RMAN8i, you should add the "alter system archive log current; command before you backup the archive logs.
You are running into the case where Oracle needs additional redo to make the database consistent that was located in the current online log at the time of the backup.
If you set UNTIL TIME to an earlier time does the recover work?
In Oracle9i, if you issue the command, "backup database plus archive logs", RMAN will automatically archive the current online log before performing the archive log backups.
Thanks, Tammy

Can You Help Me ABout getSelectedRow in JTable

Can you help me on how to solve my problem about the getSelectedRow .....
I have one JComboBox and a SearchButton
... Once I selected an Item in a JComboBox, I will press the SearchButton
and then it will look up to the database and display it in the JTable..........
i used the getSelectedRow to print the value that I selected in the table...
like this...
public void mouseClicked(MouseEvent e) {
// Ilabas yung form
if(e.getClickCount() == 1 ) {
System.out.println(table1.getSelectedRow());
In the first press in the SearchButton and then clicking the row
, It will print the selected row...... but when i press again the SearchButton then clicking a row again........
there is a problem occured....... selectedRow is always -1, can you help me to solve this.....

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
import java.util.*;
import javax.swing.plaf.metal.*;
import javax.swing.border.*;
import javax.swing.table.*;
import java.text.*;
import java.beans.*;
public class OpenProject extends JDialog {
     ResultSet rs, rs1, rs2, rs3;
     JFrame JFParentFrame; // create a JFrame
     JFrame OwnerFrame; // create a JFrame
     public JLabel proj_name;
     public JLabel proj = new JLabel("Project Name:");
     public JLabel form = new JLabel("Form Name");
     public JLabel lang = new JLabel("Language");
     public JComboBox form_lang = new JComboBox();
     public JComboBox form_name = new JComboBox();
     public JButton edit = new JButton("Edit");
     public JButton reload = new JButton("Search");
     public JButton def = new JButton("Set Text Default");
     public JButton langs = new JButton("Add Language");
     public JButton exit = new JButton("Exit");
     public JPanel panel1 = new JPanel ();
     public JTable table1, table2, table3,table4;
     public JScrollPane scrollPane1, scrollPane2, scrollPane3, scrollPane4;
     public JTabbedPane UITab,UITab1;
     Container c = getContentPane();
     Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
     public String column[][];
     public String strRow;
     public String strCol;
     public String strForm;
     public String strGetProj_id;
     public String strForm_lang;
     public String strForm_name;
     private boolean DEBUG = false;
     public int getLang;
     public int getForm;
     public int getDef_id;
     public int count2 = 0,count3 = 0,count4 = 0;
     public int row2 = 0,row3 = 0,row4 = 0;
     public int selectedRow1 = 0, selectedRow2 = 0;
     public DbBean db = new DbBean();
     public OpenProject(JFrame OwnerForm, String getProj_id) {
          super(OwnerForm,true);
               strGetProj_id = getProj_id;
          try{
               db.connect();
          } catch(SQLException sqlex) {
          } catch(ClassNotFoundException cnfex) {
          try {
               UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
          } catch(Exception e) {
          // Para ito sa paglalagay sa dalawang combo box ng value.......
          try {
               rs = db.execSQL("Select * from mst_form where form_proj_id = "+strGetProj_id+"");
               while(rs.next()) {
                    form_name.addItem(rs.getString("form_name"));
                    //System.out.println(strForm);
          } catch(SQLException sqlex) {
          try {
               rs = db.execSQL("Select distinct from mst_form where form_proj_id = "+strGetProj_id+"");
               while(rs.next()) {
                    form_name.addItem(rs.getString("form_name"));
                    //System.out.println(strForm);
          } catch(SQLException sqlex) {
          try {
               int counts;
               rs = db.execSQL("Select * from mst_project where proj_id = "+strGetProj_id+"");
               while(rs.next()) {
                    counts = rs.getInt("proj_lang_id");
                    System.out.println(counts);
                    rs1 = db.execSQL("Select * from mst_language where lang_id = "+counts+"");
                    while (rs1.next()) {
                         form_lang.addItem(rs1.getString("lang_name"));
          } catch(SQLException sqlex) {
          edit.setActionCommand("edit");
          edit.addActionListener(actions);
          reload.setActionCommand("load");
          reload.addActionListener(actions);
          def.setActionCommand("default");
          def.addActionListener(actions);
          langs.setActionCommand("lang");
          langs.addActionListener(actions);
          exit.setActionCommand("exit");
          exit.addActionListener(actions);
          proj_name = new JLabel();
          proj_name.setBackground(new Color(255,255,255));
          form_name.setMaximumRowCount(5);
          form_name.setBackground(new Color(255,255,255));
          form_lang.setMaximumRowCount(5);
          form_lang.setBackground(new Color(255,255,255));
          proj.setBounds(20, 20,100,20);
          proj_name.setBounds(120, 20,250,20);
          form.setBounds(20, 50,100,20);
          form_name.setBounds(120, 50,150,20);
          lang.setBounds(300, 50,100,20);
          form_lang.setBounds(380, 50,150,20);
          reload.setBounds(560,50,80, 20);
          edit.setBounds(110,360,115,20);
          def.setBounds(230,360,115,20);
          langs.setBounds(350,360,115,20);
          exit.setBounds(470,360,115,20);
          panel1.add(getTable());
          panel1.setLayout(null);
          panel1.setBackground(Color.white);
          panel1.add(proj);
          panel1.add(proj_name);
          panel1.add(form);
          panel1.add(form_name);
          panel1.add(lang);
          panel1.add(form_lang);
          panel1.add(reload);
          panel1.add(def);
          panel1.add(langs);
          panel1.add(exit);
          panel1.add(edit);
          c.add(panel1);
          setSize(680,420);
          setTitle("Open Project");
          setLocation((screen.width - 590)/2,((screen.height - 280)/2) - 45);
     public JTabbedPane getTable() {
          UITab = new JTabbedPane();
          strForm_lang = form_lang.getSelectedItem().toString();
          strForm_name = form_name.getSelectedItem().toString();
          int count1=0;
          int row1=0;
          try {
               rs = db.execSQL("Select * from mst_default where def_proj_id = '"+strGetProj_id+"' AND def_category = 'Title'" );
               while(rs.next()) {
                    count1 += 1;
                    getDef_id = rs.getInt("def_id");
               column = new String[count1][2];
               rs1 = db.execSQL("Select form_id from mst_form WHERE form_name = '"+strForm_name+"'");
               while(rs1.next()) {
                    getForm = rs1.getInt("form_id");
                    System.out.println("getForm");
               rs2 = db.execSQL("Select lang_id from mst_language WHERE lang_name = '"+strForm_lang+"'");
               while(rs2.next()) {
                    getLang = rs2.getInt("lang_id");
                    System.out.println("getLang");
               rs3 = db.execSQL("Select * from mst_default a, mst_translation b WHERE a.def_form_id = '"+getForm+"' AND b.trans_lang_id = '"+getLang+"' AND a.def_proj_id = '"+strGetProj_id+"' AND b.trans_def_id = '"+getDef_id+"' AND a.def_category = 'Title' " );
               while(rs3.next()) {
                    column[row1][0] = "" + rs3.getString("display_name");          // rowNum ay kung ilan ang row na ilalabas
               column[row1][1] = "" + rs3.getString("translation"); // Default yung isang array ng column ko, kaya fixed
                    row1++;
               row1 = 0;
          } catch(SQLException sqlex) {
               sqlex.printStackTrace();
               System.exit(1);
          // End
          table1 = new JTable(new MyTableModel()){
          scrollPane1 = new JScrollPane(table1);
          UITab.setBounds(30,100,610,250);
          UITab.add("Title",scrollPane1);
          return UITab;
     class MyTableModel extends AbstractTableModel {
               // Pagawa ng header Coloumn
               String ColumnHeaderName[] = {
                    "Default Text",""+strForm_lang+" Translation"
               //End
               public int getColumnCount() {
                    //System.out.println("The Column Count is" + ColumnHeaderName.length);
     return ColumnHeaderName.length;
     public int getRowCount() {
          //System.out.println("The Row Count is" + column.length);
     return column.length;
     public String getColumnName(int col) {
                    //System.out.println("The Column Name is" + ColumnHeaderName[col]);
     return ColumnHeaderName[col];
     public Object getValueAt(int row,int col) {
          System.out.println("The value at row and column = " + column[row][col]);
     return column[row][col];
     public int getSelectedRow() {
          System.out.println("Integer" + column.length);
          return column.length;
     ActionListener actions = new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               String source = ae.getActionCommand();
               if (source == "load") {
                    table1.clearSelection();
                    panel1.add(getTable());
                    table1.addNotify();
                    repaint();
               } else if (source == "default") {
                    dispose();
                    TextDefaultForm form = new TextDefaultForm(OwnerFrame,JFParentFrame);
                    form.setVisible(true);
               } else if (source == "lang") {
                    dispose();
                    CreateProject lang = new CreateProject(JFParentFrame);
                    lang.setVisible(true);
               } else if (source == "exit") {
                    dispose();
               } else if (source == "edit") {
                    if (table1.getValueAt(table1.getSelectedRow(),table1.getSelectedColumn()) != null){
                         formLang lang = new formLang(OwnerFrame,strCol,strRow, strGetProj_id);
                         lang.setVisible(true);
     MouseListener MouseTableListener = new MouseListener() {
               public void mouseClicked(MouseEvent e) {
                    // Ilabas yung form
                    if(e.getClickCount() == 2 ) {
                         dispose();
                         int col_a = 0;
                         int col_b = 1;
                         selectedRow1 = table1.getSelectedRow();
                         Object objColumn1 = table1.getValueAt(selectedRow1, col_a);
                         Object objRow1 = table1.getValueAt(selectedRow1, col_b);
                         strCol = objColumn1.toString();
                         strRow = objRow1.toString();
                         formLang lang = new formLang(OwnerFrame,strCol,strRow,strGetProj_id);
                         System.out.println(selectedRow1);
                         System.out.println(strCol);
                         System.out.println(strRow);
                         lang.txtProj.setText(strCol);
                         lang.txtLang.setText(strRow);
                         lang.show();
                    } else if (e.getClickCount() == 1) {
                         table1.setSelectionBackground(Color.blue);
                         table1.setColumnSelectionAllowed(false);
                    table1.setRowSelectionAllowed(true);
                    table1.setFocusable(true);
                         int a = table1.getRowCount();
                         System.out.println("Row Count = " + a);
                         int sel = table1.getSelectedRow();
                         //if (sel == -1) return;
                         System.out.println("Selected Row = " + sel);
                         System.out.println(table1.isRowSelected(sel));
               public void mouseReleased(MouseEvent e) {
               public void mouseExited(MouseEvent e) {
               public void mouseEntered(MouseEvent e) {
               public void mousePressed(MouseEvent e) {
     //public static void main(String leo[]) {
          //OpenProject open = new OpenProject();
}

Can you help me to solve this problem?

i run this dcl in command window:
alter table t storage (freelists 3) ;
then oracle tell moe this error :
ORA-10620: Operation not allowed on this segment
but as i know ,the database version which is above 9i can support this dcl.
my database version is oracle 10G release 2,the version is ok.
so i am so maze,can you help me ? thank you very much!

What does:
select tablespace_name, segment_space_management
from all_tablespaces
where tablespace_name in
select tablespace_name
from all_tables
where table_name = 'T'
;return?

Can you help me on these 6 SAP BW interview questions?

Hi,
Can you help me get a better understanding of the expectations in the following interview questions?
Please explain them in your on words and if you think there is an additional information, you may provide the link but I am more interested in your own words and the typical things to say:
1. What is your performance tuning experience (discussion is on SAP BW)?
2. What is your experience with SAP BW change control?
3. You will have to ensure data integrity, adherence to standards and process excellence. What is your experience?
4. What exactly is entailed in a full-lifecycle SAP BW project? When can one say that she has 3 full-lifecycle SAP BW project experience.
5. You will be responsible for working with business to develop business intelligence metrics and analytics. What is expected to be discussed on business intelligence metrics and analytics.?
6. You will be responsible for designing road-map for data warehouse implementation and growth. What is your experience?
Thanks

Amanda,
All the questions posed have a rider to it mentioning 'Your Experience' - I am not very sure if we can tell you what your experience has been...
My 0.02
Arun

Can you help me choose a right bluetooth full keyboard?

So guys, I've bought a brand new 2015 mbp 13 and for my office I need to get a full keyboard.
Logitech has a few really nice, but they have the horrible small usb stick.
Also they have bluetooth but it's not a full keyboard (does not have a numpad).
I can buy a separate bluetooth numpad but I prefer to get something integrated.
May be if you are a designer o a developer does not care for a numpad, but for a mkt guy like me it's basic...
So please can you help me on this?

I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

RE: Can you help me - Please?

Gary,
I haven't taken one of his training classes, but he does post mail to the
Forte Users Group frequently.
Here is an e-mail address for Stephen McHenry.
Stephen McHenry [SMTP:[email protected]]
The Forte Users Group has a searchable archive thread:
<URL:http://pinehurst.sageit.com/listarchive/>
Mr. Henry will have multiple Forte Users Group postings recorded there which
detail his Forte Training experience, an OOAD course that his company
offers, as well as helpful information that he has provided to other members
of the Forte Users Group.
Hope this helps.
-----Original Message-----
From: Gary Adams
To: [email protected]
Sent: 10/8/98 11:07 AM
Subject: Can you help me - Please?
Hi, I'm new here. I just signed up because I just found out about the
group
and I'm hoping you can help me.
I just found out that Mark Smith, who usually teaches the design course
at
Forté is not going to be teaching the next one. From what I've been
told,
Mark is the only one left who was trained by the original author of the
course how to teach it right. I guess there were others, but they've all
left Forté by now. If this is true, that means that the upcoming course
is
going to be taught by some untrained stand-in. I just think it's real
crappy that Forté is trying to keep all this quiet until after you can't
drop out of the course and get your money back.
I'm tired of getting second rate instructors for training course that we
spend good money for. I understand that the expert - the guy that wrote
the
course - still teaches. Can anyone tell me how to get in touch with
him?
I've been told his name is Stephen McHenry and that he's totally the
best
instructor for this stuff.
Also, does anyone know why he stopped teaching for Forté?
If anybody can help me, I'd really appreciate it.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Ian --
I agree wholeheartedly with your reply. There are countless many qualified for
such a course and not just working for Forte either, although thats a good
place to start.
-- Len
Ian Clough wrote:
Don't you think you are being a little unfair?
Forte has many employees who are more than capable of teaching the
design course not all of whom where taught by the original author.
Good teachers will use their own experiences when presenting
a course and not simply present the thoughts of others.
The Forte design course specifically focuses on the issues of designing
large scale distributed applications an area where I would hope all Forte
employees have significant experience. However much of the design
course is not unique to Forte presenting as it does the best industry
practice
borrowing ideas from Jacobson, Booch and Rumbaugh among others.
These skills can and have been acquired by consultants and trainers prior
to joining Forte and Forte is a much richer company for this input.
Ian Clough
-----Original Message-----
From: Gary Adams <[email protected]>
To: [email protected] <[email protected]>
Date: 08 October 1998 17:33
Subject: Can you help me - Please?
Hi, I'm new here. I just signed up because I just found out about the group
and I'm hoping you can help me.
I just found out that Mark Smith, who usually teaches the design course at
Forté is not going to be teaching the next one. From what I've been told,
Mark is the only one left who was trained by the original author of the
course how to teach it right. I guess there were others, but they've all
left Forté by now. If this is true, that means that the upcoming course is
going to be taught by some untrained stand-in. I just think it's real
crappy that Forté is trying to keep all this quiet until after you can't
drop out of the course and get your money back.
I'm tired of getting second rate instructors for training course that we
spend good money for. I understand that the expert - the guy that wrote the
course - still teaches. Can anyone tell me how to get in touch with him?
I've been told his name is Stephen McHenry and that he's totally the best
instructor for this stuff.
Also, does anyone know why he stopped teaching for Forté?
If anybody can help me, I'd really appreciate it.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

HT2801 I understand there is a way to use my Super Drive with my PC. However, it requires a System OS Disk. Which I never received. Can you help me with this?

I understand there is a way to use my Super Drive with my PC. However, it requires a System OS Disk. Which I never received. Can you help me with this?

Rick6812 wrote:
I'm using Windows 8.1.
I do not know what you mean by a Windows 8.1. Please clarify.
The Apple superdrive is designed to be used with the following Macs.
It will not work with any other Mac unless you perform this modification;
http://www.tuaw.com/2012/04/02/use-the-macbook-air-superdrive-with-any-almost-ma c/
Are you trying to get it to work with a PC?
Ciao.

Banner image will not display in Dreamweaver; can you help?

Banner image will not display in Dreamweaver; can you help?

If the banner image is not displaying, it is either not in an acceptable web file format (optimized for web as jpg, gif or png). Or it is corrupted. Or the path to the image file on server is broken.
It's impossible to say more without a link to your problem page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Can you help with restoring my itunes library?

I backed up my iTunes library to my external hard driver per the instructions on the website. I have now rebooted my computer to default settings, downloaded iTunes and I am trying to restore my library. The instructions are to hold the SHIFT key when opening iTunes, this gives me the option to "Choose a Library", when I browse for my iTunes folder which i have already copied back from my hard drive and select this and click Open, it just takes me through to the folders where the albums and songs are stored and then says there are no files which match the criteria and wont let me restore the library. I really dont want to have to add each album back to my library one by one. Can you help?

Scan the drive for files of the form *.itl - you may have managed to backup the media without saving the library database. If you can find the .itl file then it should be possible to fix up the library, otherwise it will be possible to reimport the media (in one go - File > Add Folder to Library) and I can suggest some tools for restoring ratings & playlists from your iPod.
tt2

Can you help me design my database?

Similar Messages

Maybe you are looking for