Can you lock the Waveform Zoom to a specific time?

I edit audiobooks.  Mono voice.  No multi-track, just one channel of voice.  When I select a zoom "width", shall I say, of the waveform - say I'm looking at just :15 seconds of waveform of 25:00 minutes of total audio.  In other words, I'm zoomed in a lot.  Audition frequently re-sizes the zoom, randomly and at will.  (It's will, not mine!) 
Sometimes it will zoom itself all the way in.  Sometimes it might zoom out to see 3:00 of the 25:00.  It just does it when it wants to.
Is there a way I can lock the waveform zoom to a specific "width" or time span?
What is triggering the software to do this? 
I'm using the Mac version with a bluetooth Mac Mighty Mouse.
Thank You

You can prevent the zoom level from changing by setting the "Zoom Sensitivity" to 0% in Audition's Preferences on the General tab. For me that means that the mouse scroll wheel has no effect on the zoom level.
Some of the buttons and keys (=/-) for zooming in and out will have no effect. What will happen if you try to zoom in is the waveform will be scrolled left/right, but not zoomed in/out, so the CTI is centered in the display.

Similar Messages

  • Can you lock the keyboard in position

    Can you lock the keyboard

    You can lock the screen, which would lock the keyboard/Screen. You can "Dock" the keyboard and "undock it". When the keyboard is up, hold your figer down on the bottom right (keyboard picture) and hit dock. To lock the screen double tap home, swipe right, on the far left big circle, tap it.

  • How can I calculate the waveform integral in a defined time interval?

    Hi:
    I need your help. How can I calculate the waveform integral in a defined time interval? For example: from "0" to "2pi"?!
    Thanks.

    Hello Clecio,
    You might want to try the Integral x(t) VI.  The documentation for this VI notes:
    Performs the discrete integration of the sampled signal X. Integral x(t) calculates a definite integral. The value of the output array at any value x is the area under the curve of the input array between 0 and x.
    You would pass the samples of the waveform that fall between your particular window, then pass 1/number of samples for the d(t) parameter.
    Hope that helps.
    Wendy L
    LabWindows/CVI Developer Newsletter - ni.com/cvinews

  • Can you lock the SPDIF IN of the MBP to an external SPDIF clock?

    I've read a lot of inconclusive posts about this. Can it be done?
    The corollary question of course is: can the SPDIF OUT of the MBP sync to a clock at the SPDIF input?
    Can both input and output lock to an external SPDIF clock?
    TIA

    Qzxptl wrote:
    OK: once more into the breach... BTW, I really appreciate the followups Pancenter.
    Heh... sorry if I misunderstood any of this.
    This is the setup:
    - The RME Digiface is synced to another device via ADAT Optical sync; it's set up as a slave to that sync signal.
    - The Digiface SPDIF Optical (not ADAT: it IS set to SPDIF) out to MBP optical In.
    - The Macbook Pro Optical out to Digiface SPDIF Optical In.
    But now you have two different clock INPUTS into the Digiface, in fact you are looping the clock signal back in. Even though you have the RME Digiface set to ADAT sync input you are still receivng clock input at s/pdif. You can't have Two Inputs receiving digital clock as there is only ONE clock per device. This setup will not work as "a device receiving digital IN must lock to external that incoming clock." (unless of course there's separate wordclock for all devices)
    This sounds similar to the infamous MIDI Y cable I invented in 1985, the one that didn't work!
    Unplug the s/pdif out of the Macbook into the RME.
    Of course the Digiface settles down, right?
    - I can get audio into the MBP this way, no problem.
    - I can get audio out of the MBP this way, no problem.
    HOWEVER: the SPDIF sync on the DIGIFACE preferences keeps switching between "Sync" and "Lock" every 20 seconds or so indicating that the signal is not perfectly locked to the Digiface clock.
    The Digiface clock is nonexistent as it's clock is running off of ADAT clock, whatever that external device is. There is not a separate s/pdif clock output on the Digiface... it's the ADAT clock.
    pancenter-

  • Can you lock the background image orientation?

    Hello all
    Is there a way to lock the image orientation? When I turn the iPad, I want the apps to rotate, but I want the background image to stay portrait.
    If not, is there someplace i can suggest the feature?
    Thanks!

    No. It will orient along with your view. You can post feedback here: http://www.apple.com/feedback/

  • Can you lock the menu bar?

    Hi all,
    I am using iWeb to create a website and so far am really pleased with what it can do.
    However i would like to be able to lock the menu bar so that it always stays at the top of the screen and the rest of the page scrolls up underneath it, or alongside it if i put the menu bar on the left. The idea is that no matter where the reader is on the page they will always have access to the menu buttons. I remember doing this on another program back in the bad old windows days, i think it might have been locking panes or similar.
    Can this be done in iWeb?
    Thanks in advance for your help.
    Mike

    Here's a locked menu in action.
    http://dl.dropbox.com/u/3563737/Lycos/Fixed.html
    It's an Ad-Hoc solution, because I had the take the shaded bar at the top into account. Will fixed that later.
    The bar at the top of this page and the other pages is a solution to have the bar stretch the width of the page when you resize the browser window.
    It cannot be done in iWeb itself. You need a JavaScript.
    So you get two solutions for the price of one.
    Here's the JavaScript :
    Apparently Discussions does not accept all the JavaScript code.
    So have a look at the source here :
    http://dl.dropbox.com/u/3563737/Lycos//Fixedfiles/widget1markup.html
    Note that you can publish iWeb at DropBox.
    Message was edited by: Wyodor

  • Can you lock the edge screen while talking on the phone?

    I just recieved my new e=note edge, wondering if the edge screen can be locked while talking on it, worried it may not work for me? I am a lefty lol and this maybe a problem while talking on the phone? Or will it?

        Kellsmom02,
    Great question. We always want functionality of a device. Yes, you can lock this device while on a phone call. You holding the device will not disrupt the use of the device.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • How can you lock the screen on iPhone in iOS 7 while talking on the phone?

    I am struggling to figure out how to lock the screen of my iPhone 5 during a phone call. In iOS 6, I was able to push the top "on/off" button to lock the screen. In iOS 7, I am able to do this ONLY while using the speakerphone. If I push this button while talking on the phone regularly or using a headphone, it ends the call rather than locking the screen.
    I have found that I am muting calls and disconnecting calls accidentially with my "face" while holding the phone b/c the screen is so sensitive. Does anyone know a way around this?

    I dont know of a way round this, but im having the same issue of puttig people on hold when putting the phone up to my ear.
    This was an issue with the iphone 4 years ago and apple had to do an update to cure it

  • Can you schedule pages to load at a specific time?

    Is it possible to schedule a page to load at a specific time/date? For example, I need my home page to update at 9am on Friday, but I will be out of the office at that time, can Dreamweaver do it for me automatically?
    I am using Dreamweaver CS3 on a Mac running OSX 10.4.11.
    Thanks,
    Elliott

    Here's a very simple sample using php. As its Thursday you will get the message 'This is Thursday and our prices are reduced by 25%' any other day and you will get the message '10% discount today'
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Untitled Document</title>
    <?php
    $day = date('l');
    ?>
    <style type="text/css">
    #thursdayOffer {
    width: 400px;
    margin: 0 auto;
    border: 2px solid #900;
    text-align: center;
    #normalOffer {
    width: 400px;
    margin: 0 auto;
    border: 2px solid #900;
    text-align: center;
    </style>
    </head>
    <body>
    <?php
    if ($day == "Thursday") {
    echo "<div id='thursdayOffer'><p>This is Thursday and our prices are reduced by 25%</p></div>";
    else {
    echo "<div id='normalOffer'><p>10% discount today</p></div>";
    ?>
    </body>
    </html>
    Depending on how complex you want to get.....you may need to get the information from a database.

  • How can you lock the desktop icon size?

    On my Macbook Pro (10/6.7) the icons on the desktop sometimes change size. I'm not doing anything deliberate to cause this. When the icons change size, I can use View Options to make them the right size again, but it's a pain to have to keep doing that, especially since some icons don't always return to their original positions on the desktop. Is there any to prevent the desktop icons from changing size?

    They shrink when you're on the desktop and "pinch" two fingers on the trackpad closer together.  If you "spread" two fingers apart, they'll get bigger.
    You can disable in System Preferences > trackpad > Two Fingers > uncheck Pinch Open & Close.
    Regards,
    Captfred

  • Can you use the same external hard drive for Time Machine backups and as an additional storage drive?

    I have an external HD that I've been using exclusively for Time Machine backups. I need to clear space on my hard drive, so I was thinking to move music & photos to an external drive.  Wondering if I can use the same one I have (which I'll aslo keep using for Time Machine) or if I need to get another drive. 

    Hi Jossydtaylor,
    Time Machine can use either an entire external disk or a partition of that disk:
    OS X Mountain Lion: Disks you can use with Time Machine
    http://support.apple.com/kb/PH11171
    You can use Time Machine with a Time Capsule, and with USB, FireWire, and Thunderbolt disks. The backup disk can be directly connected to your computer or be on a network. If the backup disk has been divided into partitions, you can use one of the partitions.
    If the disk is partitioned using the Master Boot Record (MBR) partition type, some partitions may not be available for use with Time Machine. The GUID Partition Table (GPT) partition type is recommended.
    For more info on partitioning, see this article:
    Disk Utility 12.x: Partition a disk
    http://support.apple.com/kb/PH5845
    Cheers!
    - Ari

  • Can you lock touch screen when watching videos!??

    Can you lock the screen so it doesn't become a touch screen when watching videos!??
    Just got new ipod (7th gen) and this driving me crazy that I think I'm going to continue to use my older one unless there is a solution out there. I watch tv shows while commuting and while walking here or there I have to 'palm' the ipod or walk with it at my side, and the problem is that since the touch screen is sooooo sensitive I keep fwding/rewinding/swiping the screen to something else, and then to get back to that part in the video is a pain because unlike the older ipod you can just fwd a few secs, this one jumps minutes because it's so sensitive. PLEASE tell me there's a way to lock it from accidently touching it!

    No - there is no such switch on the iPad - the switches control volume, muting, screen rotation, and the home button itself.
    You could place it behind a screen of some sort so touching the outer screen won't affect the iPad screen - I've seen ads for 'presentation kiosk' type devices for the iPad that allow this, although I'm not sure how practical they would be in the backseat of a car.

  • Concentrator 3015 - Can you lock clients down by PORT?

    I have a 3015 setup and have created a tunnel, which works fine. I also have it locked down to specific IP addresses.
    My question is, Can you lock the cleints down to only a few specific ports? (ex. port 3389 only)

    Yes, you can. There are a few steps that you need to take in order to do this. In a nutshell, you need to define a set of rules, create a filter, and then apply the filter to the group.
    To create the rules, go to: Configuration->Policy Management->Traffic Management->Rules
    Here is a link that discusses rules within the concentrator. If you scroll down the page a bit, the section below this one walks you through the process to create the rules. Take a look at some of the default rules that are configured. One thing to keep in mind is that you need to define rules for the return traffic as well unless you want to use some of the default rules to allow all outbound traffic going back to the clients.
    http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/3_6/config/polmgt.htm#1321359
    Once you have your rules defined, you need to setup a filter. The filter is nothing more than a group that allows all of the rules you have defined to be associated together. The link below talks about filters and the section below talks about adding a new filter. To create the filter go to Configuration->Policy Management->Traffic Management->Filters
    http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/3_6/config/polmgt.htm#1321359
    Once you have your filter defined, you need to associate it to a group. This is done in Configuration->User Management->Groups, selecting the group to apply the filter to and modifying the group. On the General tab for the group being modified, there is an option to associate a filter to the group. Select the filter you setup and apply your changes.
    I would setup a test group to allow you to get comfortable with setting up the rules/filters before implementing them on a production group where you could impact users. This will let you make sure the rules/filter you have setup works the way you expect it to while not impacting any of the production users.
    HTH
    -Steve

  • Can I lock the template?

    Help!! I have another problem. I want to lock the template so that no one can change the layout unless they have a password. I just want it to be a form with drop downs, and an area that they can enter text - but other than that - I want it to stay locked. Is that possible??

    You probably mean can you lock the spreadsheet/document. The answer is that you can lock tables and they will be un-editable and unmovable. However, the table where you want people to enter data cannot be locked. A user could move that unlocked table around on the page or delete it altogether if they chose to do so. Also, the only password protection is for the entire document; anyone who can use the spreadsheet can go to the Arrange menu and unlock a locked table. Basically you can't do what I think you want to do, which is to lock everything down so it is unmovable and un-editable but leaving one cell unlocked for data entry by the user.
    The closest solution I have is to create two tables. The first is the main table with all your functions. That table will be locked. The second is a table with only one cell, and it is unlocked. You can place the second table over the first so it looks like one table if you want to. You could also make the second table the exact same size as the first table and set it on top of the first table. You will have to set the fill to none so you can see the table underneath. Each of these has advantages and disadvantages so you'll have to see which you like best if you decide to do this.

  • Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, lik

    Hi,
    Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, like video controls before 1st activation) and not the blank white box- if no, I guess I have to activate all sound icons before doing a print run?thanks)).

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Maybe you are looking for