Can you perform "ymodem" and "kermit" data file transfers from within Labview ?

If third party software vendors can do this, does anyone know who they may be ? In my application, the final product which I must communicate with is a finished commercial product which uses picodos as the operating system and accepts commands and transfers data over an RF Freewave modem, downloading and uploading files using both "ymodem" in procomm and "kermit"(old program) for large data files. I've got around most of the picodos stuff but I'm left with these two items which do not seem to be handled by National.
Help !!!!
Bryce Davis
email: [email protected]
902-426-3100 ext 284

I have searched through our database and the web, and I cannot find any information about these modem protocols. I cannot even find a standard so that you could implement the code yourself. You might consider contacting our aliance members--it appears that some of them had modem toolkits in the past. The aliance list can be found at http://exchange.ni.com/servlet/Redirect?id=6361480
Jeremy Braden
National Instruments

Similar Messages

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip

Finding hard and soft open file limits from within jvm in linux

Hi All,
I have a problem where I need to find out the hard and soft open file limits for the process in linux from within a java program. When I execute ulimit from the terminal it gives separate values for hard and soft open file limits.
From shell if I run the command then the output is given below:
$ ulimit -n
1024
$ ulimit -Hn
4096
The java program is given below:
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.Reader;
import java.io.StringWriter;
import java.io.Writer;
public class LinuxInteractor {
public static int executeCommand(String command, boolean waitForResponse, OutputHandler handler) {
int shellExitStatus = -1;
ProcessBuilder pb = new ProcessBuilder("bash", "-c", command);
pb.redirectErrorStream(true);
try {
Process shell = pb.start();
if (waitForResponse) {
// To capture output from the shell
InputStream shellIn = shell.getInputStream();
// Wait for the shell to finish and get the return code
shellExitStatus = shell.waitFor();
convertStreamToStr(shellIn, handler);
shellIn.close();
catch (IOException e) {
System.out
.println("Error occured while executing Linux command. Error Description: "
+ e.getMessage());
catch (InterruptedException e) {
System.out
.println("Error occured while executing Linux command. Error Description: "
+ e.getMessage());
return shellExitStatus;
public static String convertStreamToStr(InputStream is, OutputHandler handler) throws IOException {
if (is != null) {
Writer writer = new StringWriter();
char[] buffer = new char[1024];
try {
Reader reader = new BufferedReader(new InputStreamReader(is,
"UTF-8"));
int n;
while ((n = reader.read(buffer)) != -1) {
String output = new String(buffer, 0, n);
writer.write(buffer, 0, n);
if(handler != null)
handler.execute(output);
} finally {
is.close();
return writer.toString();
} else {
return "";
public abstract static class OutputHandler {
public abstract void execute(String str);
public static void main(String[] args) {
OutputHandler handler = new OutputHandler() {
@Override
public void execute(String str) {
System.out.println(str);
System.out.print("ulimit -n : ");
LinuxInteractor.executeCommand("ulimit -n", true, handler);
System.out.print("ulimit -Hn : ");
LinuxInteractor.executeCommand("ulimit -Hn", true, handler);
If I run this program the output is given below:
$ java LinuxInteractor
ulimit -n : 4096
ulimit -Hn : 4096
I have used ubuntu 12.04, Groovy Version: 1.8.4 JVM: 1.6.0_29 for this execution.
Please help me in understanding this behavior and how do I get a correct result from withing the java program.

Moderator Action:
As mentioned in one of the earlier responses:
@OP this is not a Java question. I suggest you take it elsewhere, i.e. to a Unix or Linux forum.You posted this to a Java programming forum.
It is not a Java programming inquiry.
This off-topic thread is locked.
Additionally, you have answered your own question.
Don't bother posting it to one of the OS forums. It will get deleted as a duplicate cross-post.

How can I access a control's description and data range information from within LabVIEW 6.1 or 7.0?

I didn't see an obvious way of accomplishing this. Is this possible?

Right click on the Control and navigate to Create>Property Node. Now on the newly created node, right click on it where it says Visible and navigate to Properties>Description. This will output a string of the controls description. Now grow the node by right clicking and selecting Add Element. On on the property, right click and navigate to Properties>Data Range>All Elements. This will generate a cluster with all the range info.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

What is the best software programs that I can use to read, write and modify data / files on external HD (NTFS format i.e. Windows) ?

Hi guys,
I’m new to Mac and have a MacBook Pro Lion OS (10.6.8 I think !!!) with Parallels 7 (Windows 7) installed. Can someone please tell me what is the best software program that I can use to read, write and modify data / files on external HD (NTFS format) from the Mac OS ? I heard of Paragon and Tuxera NTFS. Are they free ? Are they good ? Are there any other software programs out there ? I heard that some people have issues with Paragon.
Thanks.

Your best bet would be to take the drive to the oldest/compatible with that drive Windows PC and grab the files off, right click and format it exFAT (XP users can download exFAT from Microsoft) and then put the files back on.
Mac's can read and write all Windows files formats except write to NTFS (and in some cases not read) so if you can change the format of the drive to exFAT (all data has to be remove first) then you will have a drive that doesn't require paid third party NTFS software (a license fee goes to Microsoft) for updates.
Also it's one less hassle to deal with too.
.Drives, partitions, formatting w/Mac's + PC's

I ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

i ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

No. Because we are not Apple employees. In fact there is no one from Apple in this forum. Contact Apple directly via phone. Use the "Contact Us" link at the bottom of this page to find the phone listing.

Can you download Lion and place on two devices?

I have an Imac and macbook - can you downloas Lion and transfer / copy to both machines?
Many thanks, G

Yes. You must have Snow Leopard 10.6.8 installed on each so you can purchase and download it. You can then re-download on the other computer without having to pay for it a second time. Or you can do the following:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

How can you save an app's data?

Hi, how can you save an app's data? For example, if I want to switch some applications on my iPod with those were on my iTunes Apps Library, iTunes will force to remove the apps that was on my device and sync the apps that I want onto my iPod. But once the app is removed from my iPod, its data will be erased too, so, for example months later, I want to put them back onto my iPod, I will lose all the apps data and games progress. So, I just want to know the way that people save their apps data.

Yo can't. apps are locked to the account thatpurchased them and in-app purchases can only be mad with the account that originally purchased the app.
You will have to recover use of the first account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
If you have not uses any of the $10 you redeemed to the new account, you can likely get that refunded by contacting iTunes
Contact iTunes

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

Can you organize your "links" panel by FILE TYPE ?

Can you organize your "links" panel by FILE TYPE ?
Or can you somehow export to somewhere and accomplish this?

Yes.
Choose Panel Options from the Links panel menu and tick the checkbox next for Format under Show Column:
Then, click the Format column-head button to sort...click again to toggle ascending / descending...

Where can I find Installer and uninstaller log files in JSE 6?

Where can I find Installer and uninstaller log files in JSE 6?

For the installer log file, search for Sun_Java_Studio_Enterprise_6_2004Q1_install, or some portion of that.
To find Java ES component product log files, search on Sun_ONE.
You can also search for the timestamp that is part of each log file name. It is of the format MMddhhmm (Month/day/hour/minute)
Refer also to the Troubleshooting chapter of the Installation Guide for additional details on reports and log files used by Java SE

TS4036 Can you change the iCloud backup date to a previous backup date?

Can you change the iCloud backup date? My iPhones processor went out and erased all of my information and saved that as my last iCloud backup, is there a way to restore my phone for the day before this happened to get all of my information back?

Long story short, I had to make a clean install of OS X (mountain lion) when I was outside my country, and if I can't show the guy at the customs back home that I purchased the macpro before making the trip, I'll have to pay taxes for it.
I could have filled the papers for that but I almost miss the plane and there was a long queue.

How can I completely remove iTunes and all associated files/programs from my Windows PC?

How can I completely remove iTunes and all associated files/programs from my Windows PC?

iTunes, along with Quick Time, iCloud, Apple Software Update, Bonjour, Apple Mobile Device Support and Apple Application Support can all be removed from your PC by uninstalling them using 'Uninstall or change a program' in Control Panel. The only obvious thing that will be left behind is your iTunes library which remains untouched. If you want to remove that as well it's just a question of deleting it.
Hope that helps.

Once you restore an iphone, can you un restore and get it all back?

Once you restore an iphone, can you un restore and it get it all back?

Once you restore the iPhone, you can choose to load a backup onto it from either iTunes or Settings on the device, but make sure to have a recent backup before performing the restore. If you are asking about a device that is already restored, then no, there is no way to retrieve the prior state of the device unless you have a backup of it.

My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

My iPad will not charge, it can sync to iTunes and transfer data/music to it, but when plugged in to a USB or an A/C wall adapter all it says is not charging.

A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
In terms of the wall charger, have you tried a different charger and/or cable, or do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can you perform "ymodem" and "kermit" data file transfers from within Labview ?

Similar Messages

Maybe you are looking for