Can you still buy Mac book pro 2010

Hey all, I have been seriouly thinking of buying Mac Book Pro 2010 model (one with Nvidia GPU in it)  I almost bought one few months back, but I couldn't get monthly payment option in Bestbuy.. And I ened up buy Asus laptop lol. As my old desktop cpu was getting old. Anywho.. I use to use Mac long ago in Highschool and they have come a long way since system 7.
I have always wanted a Mac, Tired of mircsoft Bs and all virus/spyware and other crap. Just couldn't afford one.
But hopefully that will be soon.
I have been checking on-line and reading the reviews of the new Mac Book Pro 2011 models. I also notice they are now using ATI/Amd video GPU in then. Most people are not liking them,  Being that I am gamer, I do want decent laptop with atlest half decent video card.  I have read a lot reviews on older Mac book pro's wih Nvida gpu. I myself like Nvidia over Ati.
Anywho i hope I can still get one before they are gone. My Question is...
I love new i7 Cpu in my Asus has 8 cores in it.. Runs at 1.73 ghz & Boost upto 2.9 Ghz.. (intel core i7 740QM cpu )
I'd love get that same Cpu in Mac book Pro with decent Nvida gpu...
Can I still order or buy Macbook pro with Intel i7 cpu and still have Nvidia Gpu. Even though most Mac stores/ other computer stores that sell Mac have 2011 version with Crapy Ati Cards in then?
Or once they gone, They gone? If I can order one, I just dont want miss out on good laptop.
If anybody knows. Please get back to me, So know if I should be concerned or not. Thank you very much
-Chester

Actaully No...They aren't as good or as fast as Nvidia 330M Gpu..
Older MacBook pro 15.4 inch with Nvidia Gefore GT 330M (2010)
http://www.notebookcheck.net/NVIDIA-GeForce-GT-330M.22437.0.html
New Ati/Amd Radeon HD 6490M in Macbook pro 15.4 inch (2011)
http://www.notebookcheck.net/AMD-Radeon-HD-6490M.43843.0.html
The older MacBook pro with Nvida Gpu has more memory Bus width.
Faster memory speed and shader speed..
Yes new macbook have faster 4 Core, i7 in them. Where 2010 only
had 2 cores for i5 and i7..
Check your stats for yourself... the new Ati is also only 64 Bit memory..
Thats going create alot bottlenecks and lag..
If I want to play say.. Portal 2, or Starcraft 2. I'm sure it would lag on ATI card..
My current Asus i7 1.73 ghz  has better ATI Card then curent 2011 MBP.
http://www.notebookcheck.net/ATI-Mobility-Radeon-HD-5730.23825.0.html

Similar Messages

  • Can you get a Mac book pro in white

    Can you get a Mac book pro in white

    Nope. The MacBooks are only in black and aluminum. Try iCarbons.com for a skin to make your MacBook white as you wish it to be.

  • How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

    The three beeps are an indication of a hardware problem. Power On Self-Test Beep Definition - Part 2 - Apple Support

  • Can you operate the mac book pro 15 inch with out the battery?  I read somewhere in a post that it lowers the power to about 1 gig.  I asked apple and they said it is not true because you can use it with or without both together without affecting op pw

    can you operate the mac book pro 15 inch with out the battery?  I read somewhere in a post that it lowers the power to about 1 gig with out the battery.  I asked apple and they said it is not true because you can use the comp with the power adapter and battery together or either by itself and it will not effect the 2.16 gig.  Thank you.

    If you remove the battery the CPU power will be cut by 50% (whatever they told you) so that there's no lack of power or overheating issues. It's best to always keep the battery in.

  • Can you still buy a macbook pro with snow leopard?

    can you still purchase a new macbook with snow leopard?

    No.  However, some used and refurbished Mac shops still have MacBook Pros with a warranty sold with them*:
    http://www.macmaps.com/usedrefurbished.html
    And yes, they are Snow Leopard compatible.  July 20, 2011 is the cutoff date.   So be sure the model predates that vintage.

  • Can you connect a mac book pro with a samsung galaxy note via blue tooth

    can you connect a macbook pro with a samsung galaxy note via blue tooth
    it seems that they will pair but as soon as the mac has connected it automatically dissconnects
    i was informed in the apple store before i bought it that it would be ok
    any thoughts

    The USB port on the Time Capsule is used only to connect a hard drive.
    Connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule if you do not want to use wireless.

  • How can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

    how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

    try this;
    open disk utility - verify disk permissions - repair disk permissions if errors are found.  might take an hour or less - depending on how much errors needs to be repaired.
    restart your macbook and see if that sorts it out for you.
    also check your hard drive space.  if your hard drive is almost full, that will also contribute to your macbook getting slower....
    good luck

  • How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
    Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

  • My Mac Book Pro (2010 - Snow Leopard) won't boot, or boot from safe mode.

    Hi, a bit of back ground knowledge bout the situation first, I was visiting home to see my family for two weeks in the UK, as i am currently on an internship in Dubai.
    A few days ago (one day before i flew back to Dubai from the UK - Thursday 10/07/2014) I noticed out of the blue that my Mac book Pro (i believe early/mid 2010 model) suddenly started running extremely slow. (prior to this I had be using it fine, using an array of programs like Safari & Photoshop that i know usually slows down the Mac, but unlike what I would usually experience, this was pretty much a complete freeze for 5 minutes at a time every time i tried moving my mouse/closing a program or even clicking on something. I decided I would close everything and give the computer a rest. This took a long long time, I had to force quit many of the programs open, then once going to the drop down menu to shut down the laptop it wouldn't shut down. So after a long time of waiting to shut down I decided to force it to shut down by holding down the power button.
    I left it for the evening, and then decided to turn on the laptop so it was 'on and working' for my flight back to Dubai as there had been 'stricter airport measures introduced in the UK for flights abroad' and there was a rumor that you had to prove that all electrical devices can be turned on when and if asked by airport security. after a long time it finally turned on and loaded the home screen, it had a long period on the grey apple screen with the turning gear. However still when turned on the problem of being extremely slow - freezing for 5 minutes every time i would click a program or something on the mac, like the drop down menu with the shut down option for example - still persisted. As I had to fly home the next morning (Friday 11/07/2014) I just closed the laptop lid like i had down thousands of times before over the past 3-4 years, packed it in my hand luggage and and went to bed. I flew back to Dubai.
    Over the next few days (Saturday 11/07/2014 - Monday 14/07/2014) I used the laptop sparingly a it was super slow, but i did manage to watch the second half of the world cup runners up match between Holland & Brasil. I then went on to attempt to use the safari the on the Monday night, but it was too slow to really do anything, e.g. i couldn't even really look at the BBC website as it was too painfully slow!
    This is when I decided to look up why it may be working so slow via my iphone.
    So I shut it down,
    I looked on forums and support ages and first thing they recommended was a 'safe mode boot up', so I decided to boot up in safe mode. This is where the problem seems to worsen. The Mac book pro would turn on to the grey apple screen and the progress bar appears, it begins to fill up but then reaches perhaps 20-30% then suddenly the laptops fan seems to go into over drive, making lots of noise when before this moment as it tried to boot up it was silent, then it just turns off.
    I decided to retry booting up without holding down shift (safe boot mode), but it returns to the grey apple screen with the progress bar again, as if it was in safe mode even though I had held down shift. The same problem happens, its silent as the bar fills until abut 20-30% then it seems to 'overheat' and then turn off again.
    I tried to boot it up again and again, both 'normally' without holding down shift, and 'safe mode', but the same issue arises.
    So i turned to the forums and help pages again, and there was a mention of a PRAM reset. So i tried booting it up this time but holding down 'CMD + ALT + P + R' on the moment of the first chime, then as normal with a PRAM reset it chimed twice more before I let go of the keyboard. The progress bar again appeared on the grey start up apple page, and this time reached roughly the same 20-30% mark, but without overheating or making a fan noise, it then seemed to restart the progress bar a second time. This time as it reached the 20-30% it would again over heat and then instantly turn off.
    I then decided to do a Hardware test. So i turned on the power and held down 'D', this successfully brought up the Hardware testing window, I did a regular test and within a few minutes it said there was no hard ware issue. Not convinced i decided to do an detailed/advanced hardware test which took alot longer. This time after a few minutes it started to make fan noises and 'overheating noises' however completed the hardware test and again said there was no hardware problems. I opted for the 'shut down' option on the screen instead of 'restart'.
    I then decided to try and boot it up normally again, and the progress bar appears on the grey apple start up screen, it again reaches 20-30% then turns off.
    I've exhausted my knowledge of what to do, and all the forums seem not to give the answer i'm looking for. It sees like no one has had the EXACT same problem i'm experiencing. Also being in Dubai for a further 7 weeks, I can't take the Mac book pro to an apple store, and I do not have any of the install DVD discs ect with me to try booting from DVD disc install.
    Does anyone have any suggestions for me on what I could try next? I'd be hugely grateful! Please reply below or email me.

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Mac book pro 2010 stange issue..

    hi there I have a mac book pro 2010 and have an issue, the computer appears to be running fine in most ways but key board wont illimuminate anymore and it says I have 0 percent battery level and yet it stays running while plugged, also the cd drive wont take cds...I tried the smc reset nothing happend... can anyone help?!?!

    It sounds like your charger cord is not charging, but still powering the computer.   The problem could be either the charger cord itself or the power supply unit inside the computer.  Do you have an amber light on the mag-safe detector when it is supposed to be charging?   The easiest way to check is if you have another power cord that can be plugged into the computer.  If you don't, your next best option is to take it into an Apple store and the Genius Bar.  They can determine in a few seconds what the problem is.  The same thing happened to my 2010 MBP.  I was convinced that the charger cord was working fine and that they would have to replace the motherboard.   The Genius bar found that it was indeed the charger and replaced it at their expense.

  • How can I share my mac book pro with my mac pro.

    Hi,
    Anyone know how can I share my mac book pro with my mac pro. At the moment I am in NewZealand and my Mac Pro is in UK. I used to share my both computer in UK in same network but I don't know how can I share with different network. Please help me.

    You can't, currently only the iPhone has the personal hotspot function, it hasn't been enabled on the iPad - whether it will be possible in the future I don't know

  • How can i get my mac book pro to recognize a JVC camcorder?

    How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??

    Gotta say thank you — again.  Sorry the posts were spread out over more than one location.    I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
    Definitely news we can use and the reference link is appreciated.
    OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech.  My husband and I are both official members of the geezer set and have been out of the work force for some years.  You really do pick up so much just by being in the environment where people are using things to get work done.  A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it.  No cell phone, no iPod, no iPad, no home wireless network, no streaming media.  Fixed income.  So we do with what we can as long as we can.  If we could get by without that Intel processor, we'd probably make do with what we've got.  On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need.  I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category. 

  • How can i force my mac book pro to use an external display

    how can i force my mac book pro to use an external display
    my screen is black

    What sort of adapter are you using?
    Clinton

  • How can i restore my mac book pro computer

    how can i restore my mac book pro computer??an what am i doing b4 restore my computer??
    please remind me all the think i need to do,an i dont want to miss.
    thxxxx

    Welcome to the Apple Support Communities
    If you want to erase the disk, reinstall Mac OS X and your Mac didn't come with DVDs or you have OS X Mountain Lion or Lion:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X.
    If your Mac came with DVDs:
    1. Insert the OS X DVD that came with the Mac and press C key while your Mac is starting.
    2. Go to Utilities > Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X

  • How can I make my Mac Book Pro print to a Panasonic KX-MB772?

    How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?

    You can't. The KX-MB722 is one of the few remaining printers in the class of devices called "Windows Printers" that has no on-board printing software -- it relies on a host computer to provide all of the software functionality and Panasonic only provides such software for certain versions of Microsoft Windows. In this case, it means a 32-bit version of Microsoft Windows (2000-XP, though it will probably reliably on Windows versions up to 7). Note that these devices are not guaranteed compatible with future versions of Windows either (Panasonic has already dropped software support for this model).
    I'm pretty sure that the device doesn't support remote printing without the software either (e.g., you can't setup a computer with Windows on it, share the printer, and then print to the shared printer without their software).

Maybe you are looking for

  • Including Vendor Name in Standard report 'MB51' transaction

    Hi Friends, I have a requirement of Displaying the Vendor Name in the standard report 'MB51', after the vendor No. I checked the report and it is really confusing ..... ( i ve seen something like when i double click the document number it is going to

  • SSIS Control and Data Flow Items not available in Customize Toolbox

    I cannot add additional Data Flow and Control Flow items to the SSIS Toolbox. I am using SQL Server 2014 and VS 2013 (BIDS). The standard SSIS items appear - but they are all of them. How do I add the additional ones that are not loaded by default. I

  • Upgrade from LabView 5.0 to 5.0.1

    I´m currently using LabView 5.0. I have some problems using GPIB and asynchronous access calls. These issues are solved in Version 5.0.1. Now, how can I upgrade to Version 5.0.1? I seems that there is no way to download a corresponding patch from the

  • Screen Exit for t-code VC01n

    Hi GURU , I want to add one Tab Strip in Transaction code VC01N .Can anyone please tell me the how can I add this tab .

  • How to setup JDBC/ODBC in J2EE 1.3?

    hi all, How to setup JDBC/ODBC in J2EE 1.3? I managed to run Db2, cloudscape but not MSSQL7. Is there anyone know how to set up this JDBC/ODBC driver for MSSQL7/ regards, elvis scjp