Can "yum" work on Enterprise Unbreakble Linux or is there another option?

hello
Yum being the package manager for ndiswrapper implies that if you use yum then ndiswrapper will install the drivers for you utilizing the system using the necessary resources. However yum didn't work for me therefore I tried to use ndiswrapper without using yum and got 2 warnings and 1 fatal error as shown below:
I downloaded ndiswrappers version 1.47.
I typed "su -c 'yum install kmod-ndiswrapper'"
the response was:
"setting up install process"
"setting up repositories"
however the error message was:
"cannot find a valid baseurl for repo: update"
Therefore I didn't use yum and proceeded as follows
1)created a directed named "ndiswrapper_drivers"
2)tar -zxvf ndiswrapper-1.47.tar.gz
3)make uninstall
4)make distclean
5)make
6)make install
NOTE: this gave two warnings:
a)'task_nice': (/ndiswrapper_drivers/ndiswrapper-1.47/ndiswrapper.ko) undefined!
b)this kernel seems to use 4k stack size option(CONFIG_4KSTACKS): many Windows dirver will not work with the option enabled . Disable CONFIG_4KSTACKS option recompile and install kernel
NOTE:Windows config file format changed since 1.5 you must reinstall windows driver if they wre installed before
7)ndiswrapper -i bcmwl5.inf
(driver now installed)
8)ndiswrapper -i bcmwl5.sys
(driver already installed)
9)ndiswrapper -l
(driver now present)
10)demod -a
11)modprobe ndiswrapper
FATAL: Error inserting ndiswrapper (/lib/modules/2.6.9-55.0.0.0.2ELsmp/misc/ndiswrapper.ko); unknown symbol in module or unknown parameter.
The error file ndiswrapper.0 file in step 11 seems to be the same error file in ndiswrapper.k0 file after step 6.
How can I get "yum" to work or how do I resolve these problems with respect to the 2 warinings and the fatal error?

I don't want to come across harsh, but Google is your friend here. There are many Linux-oriented sites that have done this stuff before.

Similar Messages

  • Can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?

    can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?

    Most microphone output a low voltage signal that must be put through a preamp.
    The computer needs to have a line voltage signal level instead.
    Allan

  • What time will IOS 5 be available in Belgium? Also, can I only get it through ITunes or is there another way? Thanks

    What time will IOS 5 be available in Belgium? Also can I get it only through ITunes or is there another way? Thanks

    The rules are straight forward ...
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • I had my iphone 3gs unlocked so i could use it in Oz, however although i can phone works ok, i cant get internet, but i the option of Cellular Data Network does not appear with the new sim? Can anyone help pls?

    Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc.  I have done searches and got the info details from the sim provider to activate, but  instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ?  When i put back my O2 sim card, the option reappears?
    Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
    Thanks everyone
    Ronnie

    Hi Ronnie, was wondering what brand sim card you bought?
    Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
    I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
    What version of the iOS are you using?
    Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you. 
    Telstra runs on a different frequency to others and offers the best coverage in Australia.
    Just for the record I am not an employee of any mobile company.

  • Can Solaris work with FAT32 or Linux Ext2?

    I need to work with files on FAT32 disk from Solaris. Can I do it somehow???

    I don't know the answer to Linux versions, but will say that you want to make sure that any LabVIEW add-ons/toolkits are available for the target you want, be it LinuX, MacOS, or whatever. There are a lot of features in "native" LabVIEW for the Windows environment that aren't available for the other OS platforms.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • How can I Insert pictures in the text? Is there another way besides attaching a file?

    How can I insert a picture in the text email instead attaching file?

    The feature to add images in tables is gone, ike about another 90 features that exists in Pages 09.

  • My smartbookmarks bar is no longer working in Firefox 4 is there another option?

    I love the Smart Bookmarks Bar Add-on for Firefox. Now that I have updated Firefox to version 4 it no longer works. It was stated that this add-on is not supported by version 4. How do I get something similar? I loved this add-on and want to use it.

    Have you tried this one?
    https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/

  • HT5622 i have mcbkprowith 10.8.5and trying to load quickbooks but can't get disc to load thru launchpad .is there another app file to load third party software

    I anm trying to load quickbooks for mac on my pro,put it will not open and run when i drag icon to luanchpad ,from desktop it wont run at all .how do I get the software to load on my drive

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Can Coherence  work with Spring Web Flow?

    Can Coherence work with Spring Web Flow?
    Is there any documentation on Coherence with Spring Web Flow

    cpereira wrote:
    Can Coherence work with Spring Web Flow?
    Is there any documentation on Coherence with Spring Web FlowHi,
    I do not know if there is direct integration between them out-of-the-box, but you can write an adapter which enables you to store conversation state directly in Coherence. You would need to implement Spring Web Flow's ConversationManager interface.
    On the other hand, Spring Web Flow does have a ConversationManager (org.springframework.webflow.conversation.impl.SessionBindingConversationManager) putting conversations into the HTTP session, and Coherence has the Coherence*Web feature out-of-the-box, which allows storing HTTP sessions within Coherence, which should achieve the same purpose, although I am not sure how optimal that approach would be compared to the additional capabilities direct integration provides.
    Best regards,
    Robert

  • I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

    I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1
    Thanks
    Biswajit

    Howdy Biswajit,
    The IMAQ and Vision ActiveX controls you are using with Visual Basic 6 do not install with Measurement Studio. They are installed when you install the IMAQ software and include support for Visual Studio 6. Upgrading to Measurement Studio 8.0.1 will have no effect on your IMAQ controls since they are not related to one another. Purchasing Measurement Studio Professional or Enterprise packages allows you Visual Studio 6 support for other ActiveX components. Refer to this link for a list of ActiveX components included in those packages. 
    If you are asking about using the ActiveX controls in .NET, then take a look at this KnowledgeBase entitled Do NI-IMAQ and NI Vision Support Microsoft Visual Studio .NET?
    Hope this clarifies things!
    Best Regards,
    Jonathan N.
    National Instruments

  • Where can I download Oracle Enterprise Repository 10g

    Hi,
    Where can I download Oracle Enterprise Repository that will work with SOA Suite 10g? I can see only the 11g version is available.
    Thanks.
    Edward

    i just want to use oracle enterprise manager for 11g
    where can i download it compatible for oracle linux enterprise 5.4You can download it from these links:
    Oracle Enterprise Manager Downloads
    http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
    Oracle e-Delivery Website
    http://edelivery.oracle.com
    Thanks,
    Hussein

  • SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

    SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
    Dear Portal Gurus,
    we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
    1) We have Done SSO between EP And BI System
    2) System Object is Created
    3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
    4) We have updated the required table in Bi system for executing the report on EP
    5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
    There no irj services available on BI system, as it is only ABAP stack.
    Can anybody help us in achieving our requirement
    Thanks in advance
    Michael Wecker

    Hi Michael,
    To integrate portal with BI you need to perform BI Portal integration steps.
    Refer to a document link below for guidance purpose.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
    Ensure that you have performed all these relevant steps.
    Hope this helps.
    Regards,
    Deepak Kori

  • Can someone help me find a workaround to get flash to work in XP Pro 64 bit, like there is a workaround for vista 64 bit?

    Can someone help me find a workaround to get flash to work in XP Pro 64 bit, like there is a workaround for vista 64 bit?
    I am trying to get rid of all my 32 bit apps because the more of them you run in 64 bit the less resources are available.
    Firefox has a 64 bit browser they call the Shiretoko build. I love it, it's twice as fast as a heavily tweaked 32 bit firefox. Java has a 64 bit plugin that works with it.
    The last holdout is Adobe.
    Microsoft is making Vista and Win 7 64 bit as easy and smooth as the 32 bit versions as a means to get people to start using them.
    Linux has a way to make flash work with 64 bit.
    Remember when we all had a 16 bit operating system and how much better things got with 32 bit?
    Adobe, it's time!.. don't you see that?
    Can someone help me solve my problem? Please?

    lostchild wrote:
    sorry but that doesnt help my options the guy i called said they discontinued the audigy 4 and 2. I dont know why he would say that but he said his supplier cant get them. Are they really discontinued? Also, isnt the audigy 2 zs or whatever its called for notebooks? i cant use an external one. Well not that i cant, i dont want to. I just want a good sound card mounted into my computer...
    Thanx in advance.
    no the audigy 2 zs is pci based. they have another called audigy 2 zs notebook and that's the one for laptop. if you can't find it from your vendor, you can always try getting it from someone else.

  • Can't install Oracle 8 in Linux 6

    I can't install Oracle 8 in Linux 6 because I encounted the
    following error during installation:
    Error during action 'Running startorcl.sql'.
    Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
    @/u01/app/oracle/admin/orcl/create/startorcl.sql
    exit
    What should I do ? Please help me.
    null

    Bjarne (guest) wrote:
    : Jameshow (guest) wrote:
    : : I can't install Oracle 8 in Linux 6 because I encounted the
    : : following error during installation:
    : : Error during action 'Running startorcl.sql'.
    : : Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
    : : @/u01/app/oracle/admin/orcl/create/startorcl.sql
    : : exit
    : : What should I do ? Please help me.
    : I got the same error message, and I still haven't figured out
    : what to do. If there are anyone who can help, I think we both
    : would appreciate it. Please help us both.
    Hi there!
    The first thing you should do if you get ANY (almost) error when
    installing Oracle Server in RedHat Linux v6,0 is to read this
    document carefully: http://jordan.fortwayne.com/oracle/
    After hours of struggle it finally worked for me :-)))))
    Only two things to add here:
    1) If you want to be able to connect to the Linux server
    (telnet) and running utilities like sqlplus locally on the
    server, you should copy the ".profile" file to the users home
    directory, add the user to the group "dba" AND make sure that
    the $ORACLE_HOME directory has execute permissions for members
    of the "dba" group (mine had default ONLY permission for the
    owner to execute).
    2) The file "listener.ora" was (for some reason) written
    with "oracle_sid" where it really should say the real SID name
    that is in my case "ORCL".
    I just can't thank the guy who wrote the step-by-step
    Installation guide for Oracle on RedHat Linux enough... THANK
    YOU!
    null

  • Can't display image contextMenu on Linux.

    I'm writing an Flex 3 (same issue in Flex 2)application where
    right clicking on an image should display my customized
    ContextMenu. The contentMenu is NOT displayed whenever I execute
    this application in Firefox on a RedHat Enterprise 4 Linux system.
    This issue doesn't occur on Windows based system (Firefox or IE).
    Attached is my sample application. Can anyone please help? Thanks
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application initialize="init(event)" xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute">
    <mx:Script>
    <![CDATA[
    import mx.controls.Image;
    import mx.managers.PopUpManager;
    import mx.core.UIComponent;
    private var square:Sprite = new Sprite();
    // Image
    [Embed(source="../asset/images/pie-chart.png")]
    static public var iconClass:Class;
    public function init(event:Event):void
    square.graphics.beginFill(0000000);
    square.graphics.drawRect(0,0,100,100);
    square.graphics.endFill();
    var newComponent:UIComponent = new UIComponent();
    //must set the UI component to wrap the sprite - so set
    width and height
    newComponent.width = 100;
    newComponent.height = 100;
    var menuItem:ContextMenuItem = new ContextMenuItem("Change
    Color");
    menuItem.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,changeColor);
    var customContextMenu:ContextMenu = new ContextMenu();
    //hide the Flash menu
    customContextMenu.hideBuiltInItems();
    customContextMenu.customItems.push(menuItem);
    var _imgObj:Image = new Image();
    _imgObj.source = iconClass;
    _imgObj.width = 25;
    _imgObj.height = 25;
    _imgObj.contextMenu = customContextMenu;
    newComponent.addChild(_imgObj);
    myPanel.addChild(newComponent);
    public function changeColor(event:ContextMenuEvent):void
    {square.transform.colorTransform = getRandomColor();}
    public function getRandomColor():ColorTransform
    {return new ColorTransform(Math.random(), Math.random(),
    Math.random(),1,(Math.random() * 512) - 255, (Math.random() * 512)
    -255, (Math.random() * 512) - 255, 0);}
    ]]>
    </mx:Script>
    <mx:Panel id="myPanel"></mx:Panel>
    </mx:Application>

    After much fiddling with display resolutions and TV setting, and several calls to Apple help, problem was found to have a really basic solution: replace the RCA connector cable. The old one was shot.

Maybe you are looking for