I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1
Thanks
Biswajit

Howdy Biswajit,
The IMAQ and Vision ActiveX controls you are using with Visual Basic 6 do not install with Measurement Studio. They are installed when you install the IMAQ software and include support for Visual Studio 6. Upgrading to Measurement Studio 8.0.1 will have no effect on your IMAQ controls since they are not related to one another. Purchasing Measurement Studio Professional or Enterprise packages allows you Visual Studio 6 support for other ActiveX components. Refer to this link for a list of ActiveX components included in those packages.
If you are asking about using the ActiveX controls in .NET, then take a look at this KnowledgeBase entitled Do NI-IMAQ and NI Vision Support Microsoft Visual Studio .NET?
Hope this clarifies things!
Best Regards,
Jonathan N.
National Instruments

Similar Messages

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for backgrou

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?

This might help
http://www.apple.com/findouthow/photos/#slideshow
Regards
TD

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it?

Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad? I would love to use my new ipad away from home but not sure how to use it? I am on Telus mobility with my iphone 4s.

See the answer on the same question you asked a few minutes ago.

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SAP Sol Mgr 4.0 Upgrade to 7.0 Enterprise Edition

Hi,
I have installed SAP Sol Mgr 4.0 SR3. Now I want to upgrade to SOl Mgr 7.0 Enterprise Edition.
What are the steps I need to follow.
Regards,
B

Hi Neshimi,
Thanks for your reply. Points assigned.
I actually installed Sol Mgr 4.0 SR3. In your reply you mentioned it same as Sol Mgr 7.0 SR3.
Is the Sol Mgr 7.0 EHP1 same as Sol Mgr Enterprise Edition?
Please let me know the steps I need to follow to upgrade to Enterprise Edition. I understood your reply partly.
Please be more clear so that I can understand easily.
What are the patches or updates I need to download. How to Upgrade after I download the files.
The reason why I installed Sol Mgr 4.0 SR3 first is I have the license for it. Is the upgrade free for the next version?
Regards,
B
You can also install ETP as a add-on
check #1109650 and:
#1140258:
2. Prerequisites for the installation
You require SAP Solution Manager 7. 0 SP15 to SPS 17. With SPS 18 (identical to EHP 1) it is automatically activated. The steps described further down are not required.
3. Preparing for the installation
4. Executing the installation
Download the SAP Solution Manager Extension Add-on ST-ETP from SAP Service Marketplace. For details see note 1109650.
Install the Add-on in your Solution Manager
5. After the installation
To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
a) In the case of ST-400 SP15-SP17
To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
b) In the case of ST-400 SP18 or higher
The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
Please also note that your Solman 4.0 SR3 is similar to SolMan 7.0 SR3. The name has just changed in order to matchup with the Netweaver naming convention
Nesimi

Upgradation from 10g R2 Enterprise Edition to 11g R2 Standard Edition

Hi All,
I am going through a challange, and have some doubts on it, please have a look on it.
My DB Details are as follows.
Queried from TOAD:
Production Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Development Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Production server is in Enterprise Edition and Development is in Standard edition. Now my organization expecting to upgrade Oracle to next Database Version i.e., 11g R2 Standard Edition in both Production & Development, cause they are using only a single application in Oracle DB.
For production, current DB is Enterprise Edition & Upgrading version is of Standard Edition. What are the consequences am I going to face while upgrading the version and edition from 10g R2 EE to 11g R2 SE.
What are the patches I need to apply for it, or need I to do new Installation and dump data using Import & Export at user level. My DB Data is mostly around 2 - 3Gigs.
Kindly let me know which is easy way and which is standard practice advised by Oracle.
Thanks in Advance.
Mohd Sirajoddin

Enterprise edition has lot of features than standard edition and hence we can not migrate from enterprise edition to standard edition,.
The only possibility is Export/Import or Expdp/Impdp
It is also discussed at
oracle downgrade from enterprise edition to standard edition

HT201269 I have lost my iPhone 3GS. It was backed up to my computer using iTunes. I now have a new iPhone 4 series from a friend. How can I restore the backup information for my previous phone to the new phone?

I have lost my iphone 3GS. It was backed up to my macbook pro using itunes. I now have a new iphone series 4 (china model). How can I access the backup information for my old phone and put it on my new one?

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

Hello Experts., I would like to use only Lightroom but current set up by Adobe will force me to get Photoshop along with Lightroom. Is there any way where I can get only Lightroom and pay for the same.

In the present set up by Adobe if one need Lightroom alone, they have to get and pay for Photoshop also Which I am not interested. Is there any way I can get only Lightroom.? Please help.

Just for clarity, the strict answer to your question is "no": you can't get just Lightroom for the same price as the Lr/Photoshop Creative Cloud (CC) bundle.
You can buy a stand-alone licence for Lightroom alone - that's what Don and Elie have helped you to find - but the pricing (and licencing) arrangements are entirely different to those which make up the CC bundle.
Note too, it's likely that Lightroom 6 will be coming before long (although how long is not known): you will almost certainly have to pay for the upgrade to Lr 6 if you're on a stand-alone licence, whereas moving from 5 to 6 (and to 7 and to...) is included in the price of the bundle.

I am currently using Firefox 4.0 as it says with the "About Firefox". But when I'm trying to install certain add-ons for FF4, it still says that I'm using Firefox 3.6.8 :|

To be more particular, I'm trying to install the "Shine Bright Skin" theme which is for Firefox 4, but it says that it is not compatible with my current version, it says I'm using FF3.6.8 but I'm really using FF4.
[http://i53.tinypic.com/29dxpqu.jpg Shine Bright Skin]

According to the "More system details..." you have a preference set called '''general.useragent.override''' which sounds like the most likely culprit. Use the about:config preference editor to clear that preference.
(1) Type or paste '''about:config''' into the location bar and press Enter. Click the button promising to be careful if it appears.
(2) Type '''agent''' into the filter box and wait for the list to be filtered.
(3) Right-click '''general.useragent.override''' and choose Reset to return that preference to its default value.
Any luck?
By the way, this override might have been set by an add-on to improve compatibility with something else... good luck tracking it down.

HT1338 When I click on the iPhoto icon, this message pops up; "You can't use this version of the application iPhoto with this version of Mac OS X." This started happening after I applied the update for iPhoto. How do I fix this?

I installed the update for iPhoto and now iPhoto won't open. Help!

Have you tried deleting the plist from the Library folder?
If this doesn't work, you could import the old version of iPhoto version of iPhoto from Time Machine and try the update again.
This thread has some other ideas:
https://discussions.apple.com/message/18653335#18653335

I am waiting for a new iMac with two drives: SSD conventional hard drive. How can I transfer only a certain number of applications to the SSD and the rest to the physical hard disk drive?

I am expecting a new iMac (i7 with SSD). How can I transfer only certain applications along with the system, library etc. to this limited (space) HD and other applications to the conventional disk HD in order to save space on the SSD?
Thank you,
Gilles

Tom Lassiter wrote:
I have the same scenario, using an SSD for my start-up drive. I have copied my Applications folder to a mechanical hard drive and created symbolic link to it. The symbolic link resides on the SSD and works properly.
That may not be the best solution. Many updaters expect apps, especially Apple apps, to be in the /Applications folder on the OSX drive; if there are updates, the apps may not be found, thus may not be updated. I don't know if the installers/updaters will follow a symbolic link or not.
DItto some apps, especially Adobe apps, won't even work if they're anywhere else. Again, I don't know if they'll follow a symbolic link, either.

After upgrade to Mavericks, a new gray screen appears just before the regular login screen. The new screen appears for a few seconds with several boxes full of unidentifiable figures. How can I remove?

OS X Mavericks Upgrade Issue
Now when I boot my iMac, a new gray screen appears for a few seconds following the Apple screen and just before the login screen. The new screen shows several boxes with unidentifiable figures in them. It has become annoying because it has never appeared before. Anyone know of a way to stop this screen (of garbage) from showing? Thanks…Larry

It's possible that a PRAM reset may solve the problem:
http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US

Oracle Enterprise Edition for CentOS 5.5, 64-bit ?

Hi
We are going to install Oracle enterprise edition 11gR2 on CentOS 5.5, 64-bit servers for 2-node RAC/ASM setup. I guess we should just need to download "Linux x86 -64" from oracle software down page http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html. Should that work for CentOS 5.5, 64-bit, since there is no specific version for CentOS 5.5, 64-bit? And that Linux x86-64 works for all different kind of linux 64bit?
Thanks!

Hi;
CentOS is not a certified and supported operating system for Oracle RDBMS software and there are no plans to add support for CentOS. Supported operating systems are listed in the 11gR2 Oracle Installation Guide in chapter 3 which is avaliable at
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763.pdf
Please see:
Linux: 11gR2 runInstaller Fails with "An internal error occurred within cluster verification framework" [ID 1207894.1]
Regard
Helios

Difference between Enterprise Edition and Standard Edition for Oracle RAC

Hi,
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost.
Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?
Regards,
Chirag

994551 wrote:
Hi,
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost.
Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?Hi,
There is no "Grid Infrastructure 11gR3 Enterprise edition and Standard Edition", is only Grid Infrastructure 11gR2.
About Oracle Clusterware (Grid Infrastructure) licensing.
At least one of the servers in the cluster is licensed for Oracle Database (SE1, SE, or EE)
A cluster is defined to include all the machines that share the same Oracle Cluster Registry (OCR) and Voting Disk.
http://docs.oracle.com/cd/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ
About Database licensing.
http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html
Note : Oracle Real Application Clusters (Oracle RAC), is an option to Oracle Database 11g Enterprise Edition and included with Oracle Database 11g Standard Edition (on clusters with a maximum of 4 sockets).
If you move to Oracle EE you must purchase a separate licence to use RAC option
About Installation:
Nothing changes on your current setup of Grid Infrastructure 11.2
Just install a new fresh installation of Oracle Database (On current clusterware) chosing E.E during Install. Configure the database/services to start from this new ORACLE HOME. Nothing change on Database all previous backup and features used still unchanged. Using this new Oracle Home new features are enabled to be used by your databases.
About Downgrade:
Step by Step Procedure to Convert from Enterprise Edition to Standard Edition [ID 465189.1]

SAP on Windows 2008 R2 Standard to Enterprise Edition

Hello!
We are using SAP NetWeaver System running on Windows 2008 R2 Standard Edition (VM Ware).
We are planning to extend RAM size of this server up to 50GB.
Is there any possibilites for an Inplace Upgrade from Standard to Enterprise Edition?
Thank you!

Actually, it is possible. I haven't done it myself, but there is a tool, DISM (Deployment Image Servicing and Management tool), that supposedly supports in-place edition upgrades, i.e. exactly what you're describing. It's talked about in Microsoft Technet at Upgrading Windows Server 2008 R2 without media - Server Core - Site Home - TechNet Blogs. It's about the same thing as a "Windows Anytime Upgrade" that you see available in Windows 7 or 8, so no reinstall is necessary.
If I recall correctly this wasn't possible in earlier versions of Windows Server, and that's probably what Reagan is remembering.
Let us know how it goes!
Best regards,
Matt

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

Similar Messages

Maybe you are looking for