Cancelling Reports, REP-56071 error

I want to allow SSO users to cancel their own reports, but when I try killjobid, I get
"REP-56071: Security check failed with error message: No privilege to do the operation"
Is there a way to grant permission to individual users to view and cancel their own reports?
thanks,
Mark

I'd like to know the answer too.
Thanks,
Xiaoyun

Similar Messages

Rep-1340 error for date type

I want to transfore forms date directly to report. then i use run_report_object function. But in forms i use datetime type replace of default date type. then the item can show time. then i revoke the report.rep-1340 error get. Who have better solution. thanks a lot.

Hi ...
pass thedate by a parameter list
but transform the date into char
with to_chat(the_date,format)
in report's query you will may do like this:
select ..... where query_date = to_date(the_parameter,format);
the formats must be the same.
Good look !
Ovidiu ANCUTA
[email protected]

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*

REP-56071: Security check failed with error message

Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras Weintrauth

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

Stock variance report Crashes with error code REP-56048

SR : 6990718.992
gtcr : http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=6990718.992
Problem Statement : When the user is trying to generate report for Stock variance report from Oracle Retail Merchandising System the report crashes with error code REP-56048.
The steps to reproduce are specific to Oracle Retail Merchandising system application and hence I have not mentioned here.
The REP-56048 error seems to be generic. Could you please advise me on this issue.
Thanks & Regards,
Sameer

You can review the following Oracle Metalink Document;
Comprehensive REP-56048 Troubleshooting and Overview Guide: Doc ID: Note:285281.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:88153902823984055::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,285281.1,1,1,1,helvetica
Hope it would be useful.
Adith

Error Running Reports (REP-0081 & REP-0124)

Please help.
I am having the following error when running a report on the web:
(from the Reports Queue Manager)
Terminated with Error :
REP-0081: Error during file I/O operation. REP-0124: Unable to
write to the temporary file. scafa 3
thanks for a reply
regards
Yogeeraj

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

REP-2103 error in report summary column

Hi ,
I am getting the below error while running the report
REP-2103 Column 'CS_Achived_tot' : PL/SQL formula returned invalid value or no value
Could you please help me ...
Thanks in Advance
Regards,
Sandeep

Hi,
I have used the below code in the formula column
function CF_Achived_totFormula return Number is
v_achived_tot number;
begin
begin
select nvl(:attribute4,0)
into v_achived_tot
from dual;
exception when others
     then
     --v_achived_tot :=0;
     srw.message(130,'CF_Achived_tot');
     return null;
end;
return (v_achived_tot);
end;
no data was there in the attribute4 feild and it was varchar2 data type
Regards,
sandeep

Reports Builder Error - REP 1070 Error while opening or saving document

Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
Anand

Hi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared.

REP-57000 Error When Generating a Report in EXCEL format

Hello All,
We're encountering an error that says "REP-57000: Oracle Reports API - Internal error: Item: oracle.reports.definition.RWReport;Prop:34; Attr: ]] ...".
The report works fine and is able to generate an EXCEL file when it retrieves around 3K records. We only encounter the error when the number of records exceeds 5K.
What is the cause of the error? Additional note, we're using Oracle Reports Server ver.10.1.2.0.2.
Any help would be greatly appeciated. =)

In the reports engine conf file (Example on UAT -> rep_lonshutl5n2_10gr2_forms_reports_service.conf) add JVM Heap Options
jvmOptions="-Xms512m -Xmx512m"
First option is the minimum heap size and second is maximum. The size is in MB and max size can go up to 4000 depending on physical/virtual memory available on Operating System.
Change this Value from 512-2000 and try running your report
In case this doesn't solve your problem, change your output Format to DELIMITEDDATA and try running the reports. There is a bug in Oracle that it doesn't support large excel outputs in DELIMITED format.

REP-1425 report formula DO_SQL error putting value into column

Hi all
I have opened a report 2.5 in Oracle9i Reports Developer and, it converted ok. However, when I run the report (paper layout), the message
rep-1425 report formula DO_SQL error putting value
into column. Column may not be referenced by parameter
triggers
appears. There are several report level formula columns and corresponding placeholder columns that are the cause of this error. The formula has the following :
SRW.DO_SQL('SELECT RPAD(''DAILY TABLE AUDIT REPORT'',60,''.'')||TO_CHAR(SYSDATE,''DD-MON-YYYY'') INTO :REPORT_TIT FROM DUAL');
COMMIT;
RETURN('');
I can't work out what this error message really means as the column, report_tit is a placeholder column and, the formula column is not a parameter trigger!! The report_tit placeholder is used as a source for a layout field. I noticed that the layout field is defined as a placeholder column in the converted report but in the reports 2.5 version, it is defined as a layout field.
I can do a work around by replacing the SRW.DO_SQL statement with a normal PL/SQL SELECT statement. However, I wonder if anyone else has had the same problem and, if anyone can help provide an answer as to what this error really means and, also, how I can retain the SRW.DO_SQL statement and/or an alternative work around to the one that I have described.
Thanks.
Therese Hughes
Forest Products Commision

Hi again
The firewall proved to be the problem after all! The firewall set in Reports config-files is not used for WebServices, it has to be set within the stub:
Properties prop = System.getProperties();
prop.put("http.proxyHost","yourProxyServer");
prop.put("http.proxyPort","youProxyServerPort");
I inserted this in my java-code and after some problems (see below), restarting Report Builder turned the trick, the report works now.
Cheers
Tino
Here there mail I set up before I found that restarting Report Builder helped:
Thanks for your answer, putting in the proxy-settings actually helped some - the same error message is
popping up, but instantly and not after 10 seconds like before:
My proxy lines look like this, I also tried "http://proxy.ch.oracle.com", but "proxy.ch.oracle.com" proved to
be the correct syntax:
public Float getRate(String country1, String country2) throws Exception
Float returnVal = null;
Properties prop = System.getProperties();
prop.put("http.proxyHost","proxy.ch.oracle.com");
prop.put("http.proxyPort","8080");
URL endpointURL = new URL(endpoint);
Call call = new Call();
I tested the new proxy-entries by disabling the proxy preference in JDeveloper, so I could verify the added
proxy-lines in the code work - they do. If I change the proxy to some incorrect value like
"proxyy.ch.oracle.com", they fail.
After unsuccessfully trying recompile and re-import of Java classes, I rebuild the report from scratch and
stumbled over the same problem. Now the question is, whether I'm still doing something wrong with the
proxy or whether there is another problem after passing the firewall....
-------------------------------------------------------------------------------------------------------------

Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error

I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.

Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS.

Cancelling Reports, REP-56071 error

Similar Messages

Maybe you are looking for