Cannot Access Array Issue
I cant seem to get the array to be read from outside of the public MyBuffer part of the class. I need to be able to access theArray from the rest of the class. Does anyone know what I did wrong here? Thanks!
public class MyBuffer<T> extends Object implements Bufferer, SaveRestore
public MyBuffer(int x)
Object[] theArray = new Object[x];
public boolean produceItem(Object item)
try {
//puts the items into the array from the assign classes
//THIS IS THE PROBLEM - I need to be able to assign items to the array and in other portions i need to be able to read them back.
//theArray[size]=item;
size++;
return true;
//catches an array exception
} catch (ArrayIndexOutOfBoundsException e){
return false;
}
I actually just didnt think of that. Now that works!!!
Now I've gotta get it to write. This method of writing seems to work fine for when I just plug in a number instead of the theArray[i] in there. I dont see why it shouldnt work when all I did was put theArray[i] instead of a number?
This is the error I get:
.\MyBuffer.java:91: cannot find symbol
symbol : method write(java.lang.Object)
location: class java.io.BufferedWriter
out.write(theArray);
And this is my code for that section: try {
BufferedWriter out = new BufferedWriter(new FileWriter(fileName));
for (int i=0;i<=size;i++)
out.write(theArray[i]);
out.write("\n");
out.close();
} catch (IOException e) {
Similar Messages
-
I want to submit an issue with Game Center--itself, directly. I had an account set up that I used to play online games. I changed my appleID and then I no longer could access my game center account. I, apparently, had a new game center account created for me (which is friends with my old account) and now I cannot access my original game center account.
If I can't get access to email apple directly (which seems ridiculously difficult to do), then someone please tell me how to FIX the issue.
Thank youYes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time. -
Domain Controller cannot access \\domain\netlogon causing Auth issues
Hi everyone, I have been spent all day trying to figure out what is going on here, I have a Domain controller (only DC in the environment) that is acting funny
I first noticed when I was attempting to RDP into a server in my domain I was getting "access denied" (but I could log in as a local admin). So when I looked at the Domain Controller, I ran a DCDiag DNS test and got some an AUTH error, but am not
able to figure out how to fix this.
Another thing I notice is when I am signed into the domain Controller (GP2010-a), I cannot browse to
\\contoso.com\netlogon or any similar share.
Here is the kicker, other servers on this domain, server3, server4, server5 etc... THEY CAN access
\\contoso.com\netlogon It is ONLY the Domain controller and Server2 that CANNOT access this share. The other servers also allow me to RDP into them fine, it is only 1 server that is affected by this strange behavior.
I have checked for no IP conflicts and as far as I can tell all the DNS records are correct.
Regarding the DYNAMIC ip warning, we have a reservation that assigns the IP
thanks for any input here as i'm really stuck,
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = GP2010-A
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GP2010-A
Starting test: Connectivity
......................... GP2010-A passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\GP2010-A
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... GP2010-A passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : contoso
Running enterprise tests on : contoso.com
Starting test: DNS
Test results for domain controllers:
DC: GP2010-A.contoso.com
Domain: contoso.com
TEST: Authentication (Auth)
Error: Authentication failed with specified credentials
TEST: Basic (Basc)
Warning: Adapter 00:0D:3A:00:0D:01 has dynamic IP address
(can be a misconfiguration)
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 128.8.10.90 (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.8.10.90
DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:1::803f:235
DNS server: 2001:500:2::c (c.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2::c
DNS server: 2001:500:2d::d (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2d::d
DNS server: 2001:500:2f::f (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2f::f
DNS server: 2001:500:3::42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:3::42
DNS server: 2001:500:84::b (b.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:84::b
DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:ba3e::2:30
DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:c27::2:30
DNS server: 2001:7fd::1 (k.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fd::1
DNS server: 2001:7fe::53 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fe::53
DNS server: 2001:dc3::35 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:dc3::35
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: contoso.com
GP2010-A FAIL WARN PASS PASS PASS PASS n/a
......................... contoso.com failed test DNSHi,
TEST: Basic (Basc)
Warning: Adapter 00:0D:3A:00:0D:01 has dynamic IP address
(can be a misconfiguration)
Do you have any NIC conifgured to get dynamic IP on your DC which is having issue? If yes, please disable that NIC. Also, please provide me the result of the below
1) On your DC which is having issue, run "ipconfig /all"
2) Repadmin /showrepl
Thanks,
Umesh.S.K
Thanks, there is only 1 nic card. It is getting a dhcp address because this is an AZURE Hyper-v machine and I have set an IP reservation for it. I have no way to hardcode the IP because it gets shut off/on all the time
C:\Users\Administrator>repadmin /showrepl
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\GP2010-A
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 007c755c-f56c-4e51-a211-fd4431f63927
DSA invocationID: 007c755c-f56c-4e51-a211-fd4431f63927 -
Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.
-
Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you
You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you. -
ITunes Match is on but IPhone 5 cannot access any songs stored in the iCloud. I have no issues with my IPad playing music stored in the cloud. All settings appear correct. ITunes Match is turned on on my PC. No matter what I do I cannot get get any music even when I try to sync tunes purchased from the IStore.
Hello mwbark,
The following article contains information that may be helpful in getting your iPhone working with iTunes Match.
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/TS4054
Cheers,
Allen -
How do we change itune and icloud accounts? My wife and I have separate accounts but she cannot access hes, only mine. This causes many issues like face time, text etc. Do we have to reset her devices and start fresh?
I think this may be the answer.
http://support.apple.com/kb/HT5621 -
I have a National Lottery online account but for a while now i cannot access it from my MacBook. I can access it via other pc's and laptops and via my iphone. I have been on to the NL helpline and they say the issue is with cookies and my MacBook. Help!
Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
I cannot access my online banking account. Is this a Loin issue?
I cannot access my online banking account. After talking to the bank and internet provider it was suggested it may be a lion issue (we just upgraded). Can anyone help with this problem?
I tried Google Chrome with the same results. We just downloaded Mountain Lion and I'm thinking that may have changed something. Everything else works but my online account.
-
I go into the 2008 r2 dc and add a user. The 2003 dc has all of the fsmo roles. Then I go into the exchange server and add the new mailbox through the GUI. It runs the cmdlet and creates the new mailbox without any errors. Then I go in and try to access
the mailbox through owa and cannot access the mailbox. It says the mailbox does not exist. Both my 2003 dc(which I want to decommission) and 2008 servers are replicating. I see the user object on both servers. I have the email server pointed to the 2003 dns
server as my preferred dns. This just started happenning a couple of days ago. I dont know if a windows update caused this but everything was fine before Wednesday. All of the other users can access their mailboxes through owa just any new ones I created cannot.
In fact when I send a test email to the new account, I immediately get a bounce back so I dont think I would be able to access the new mailbox through outlook.
visualbasicfrustratedHello,
I recommend you check your exchange server using windows server 2003 DC or windows server 2008 DC.
Please use repadmin /showrepl command to check DC replication status.
Please check if there is related error in application log.
Cara Chen
TechNet Community Support -
Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please helpThx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive. -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows 7 pro client cannot access folders on server 2003 domain server
I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios. <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish. <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems. <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
SharePoint Designer 2013 cannot access workflows in Office 365 Site
I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site assets
etc.), getting the following error: (Am restricted from submitting images)
"Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities"
Restarting SPD doesn't help, after clicking OK I get the "SharePoint Designer cannot display the item" screen, prompting me to refresh.
When I do refresh, I get the following:
"Windows Workflow Foundation, part of .Net Framework 3.0, must be installed to use this feature"
This is happening on my machine, Windows 7 64 Bit, SPD 2013 64 Bit, but on a colleague's machine, Win 7 64 Bit, SPD 2013 64 Bit I can access the workflows.
I get the same error if I try to create a new Workflow on my machine but I can create it on my colleague's machine.
I downloaded SPD 2013 on a 32 bit laptop I have access to, in which I can create a workflow. One existing workflow can be accessed, updated etc. with no issue, one opens to a prompt to "Insert a stage" and one tells me that it "Failed to load
the workflow definition for the workflow", then the "SharePoint Designer cannot display the item" screen. All of these workflows can be accessed from my colleague's machine.
Here are the actions that I have taken to date on my own machine:
Cleared the caches multiple times
Checked for updates
Installed .Net Framework 4.5
Re-installed .Net Framework 4.0 (which contains 3.0)
Uninstalled and re-installed SPD 2013
Due to issues with a workflow on the site I am in contact with MS Support who are aware of this issue, they sent me a link to a hot fix that was already installed but they have no concrete idea of what might be going on.
I was convinced that it was an issue on my machine, but I don't know what the issues that I have seen on the 32 bit SPD on the new laptop mean.
I have been searching the internet for a fix with no success, I would appreciate any help.
Thanks
MickHi,
According to your post, my understanding is that SharePoint Designer 2013 cannot access workflows in Office 365 Site.
There was an issue recently when a service release was implemented that incremented the version number in the HTML header on some SharePoint online sites to '16' when SPD was expecting '15'.
I suggest to install internet explore 10 and install a patch for IE10. Then test with "open with windows explore" then opened in SPD from sharepoint online.
In addition, I suggest that in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your Microsoft Login).
If the issue persists, to troubleshoot this issue, you can uninstall all versions of SharePoint Designer on workstation, clear cache and then reinstalling the latest SharePoint Designer. For the detailed information, you can refer to the
article: http://support.microsoft.com/kb/2794961
Here are two similar threads for you to take a look at:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013
http://community.office365.com/en-us/forums/154/t/149314.aspx?PageIndex=2
By the way, you can also post the question in Office 365 forum and more experts will assist you.
Office 365 forums
:http://community.office365.com/en-us/forums/default.aspx
More information:
SharePoint
Designer 2013: Server-side activities have been updated:
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Best Regards,
Linda Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Mail cannot access your mailbox information because it is in use
I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.
Maybe you are looking for
-
How to remove the black line from a stacked canvas at run time???
Hi All, I've developed a stacked canvas within a content canvas, when I run the form the stacked canvas apeared with a black line takes it. How to remove this line or how to disappear this line at run time?? I tried to do this by putting (no line) in
-
Unable to view website from within network - OSX Server
I have recently set up a Mac mini server in my home. I have configured the DNS settings manually by creating a primary zone being my domain and then a machine record (A Record) in order to configure the right host name. I've checked this the usual wa
-
My message is simply the question. Anyone know how? Thanks.
-
hi everybody! i want to register iLife and the operating system of my macbook i bought it quite some time ago, and never did it before the intallation DVD for both were part of the package i bought and included with the computer however, i cant find
-
My preloader won't work in the latest version of IE.
I'm designing a site for a friend of mine who has just upgraded to the latest version of Internet Explorer. Now the preloader to load his site won't work, and it just stops on the number "0." Below is the code that I'm using. The code appears on the