Cannot Access Profile Options in New Verizon Webpage - Poor Tech Support

I just started with Verizon this past Thursday for phone and internet DSL. Everything went smoothly except for the fact that there is a new webpage that Verizon is using that presents the customer and/or user with Profile options.
Every time that I try to access these options, a message appears that states that these options will be available when my installation is completed.
I have already installed the latest Verizon software on my PC, spoke to countless HSI support people, and am told that I would have to wait 48 to 72 hours for this to hopefully be resolved.
Each time, I am given a scripted response where each rep uses screen sharing to try and resolve the problem. They waste my time by spending over an hour checking options, and then tell me that it is a webpage problem not my PC.
I have never seen a new webpage rolled out and Beta tested while the old one was closed. In other words, every competitor of webmail Hotmail to Outlook, and Google with their new webpages, always keeps the old webpage active until they have worked out all the problems of the new one. They even allow you to try the new one, and then roll back if you were not satisfied.
Verizon, you did a very poor job with this roll out by not presenting these options to the user. In your rush to implementation, you run the risk of losing customers because of the time wasted by scripted customer service reps who don't have a clue as to what is going on. I left Time Warner Cable to come to you for specific reasons, and in regard to Internet, you pale in comparison to their customer support. It never took them days to resolve a problem.
I guess Internet services is not important enough.

I am sorry to hear about the problems with the website. Are you still having difficulties? Please reply back if so that way we can assist further.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

After installing latest update cannot access "messenger options" under the options tab

After installing Firefox latest update I cannot access "messenger options" under the options tab. The other tabs, themes and mail options work when clicked but nothing happens when I click "messenger options" It works fine in IE.

When I go to the settings page to access iCloud and click on terms and conditions it gives the message

TS3297 i cannot access itunes on my new ipad. Can anyone assist?

I cannot access itunes on my new ipad. Kindly someone assist?

Rather than a "bug" - it appears to be some bizarre issue with the Apple servers that has been going on for a few days now. Users have had a few different issues with the App Store and a couple of them seem to have been fixed, but now this issue has cropped in the last couple of days.
No matter what we call this - it is not a necessary procedure, it's just fluke thing that needs to be addressed by Apple. This is not normal protocol for downloading apps from the App Store.

Cannot access iCloud option in settings

I Cannot access iCloud option in settings

If it's grayed out and won't open, go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.

I cannot access updates using my new password it was verified by adobe

I cannot access updates using my new password it was verified by adobe

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

As a Realtor I can't access documents on our ARMLS web site, the tech support say it is an adobe reader issue?

For some reason, suddenly I can't access the documents tab on our ARMLS web site. I called Tech support for the Flex web site and they say they can open the tab and read the docs fine.
They are saying it is an Adobe issue on my computer. I un installed adobe and reloaded but the same result.
Any ideas
Thanks
Craig

Yes, I just changed my browser to Internet Explorer and same result, I
still can not read any PDF documents loaded to this site.
I have not tried un installing adobe but that is next, then reinstalling
while in Explorer.
As a Realtor I can't access documents on our ARMLS web site, the tech
support say it is an adobe reader issue? created by ~graffiti
<https://forums.adobe.com/people/%7Egraffiti> in Adobe Reader - View the
full discussion <https://forums.adobe.com/message/6830001#6830001>

Cannot access tool options in CS4 please help

Last week it was working fine. Last night and today, I Cannot access the tools options by double clicking, and in the tool options bar it always says no selection even when I have selected a tool. I cannot reset because the tool selection icon is missing. I have made sure all updates are done. I rebooted and cleaned off things on the computer to make sure there was plenty of space.
I am a very very new person to this, but as I mentioned, it was fine last week. I don't believe I made any changed to anything. I hope someone has a suggestion.
I use Windows XP by the way

I Cannot access the tools options by double clicking, and in the tool
options bar it always says no selection even when I have selected a
tool. I cannot reset because the tool selection icon is missing. I
have made sure all updates are done. I rebooted and cleaned off things
on the computer to make sure there was plenty of space.
The Options bar always says no selection if you have no object selected -- just selecting a tool won't make no selection go away.
As far as double-clickig a tool to see the options for that tool, it should work -- I'm wondering if there is something wrong with your mouse. Try switching to another mouse and see if double-clicking works with the new mouse.
If none of the suggestions in this forum fix the problem, you may need to un-install and then re-install Illustrator.

Cannot access Print Options

Im trying the Aperture 2.1 trial before buying the product. I like the editing features of the software but havent been able to print an image yet since, for some reason, I cannot access the printer options through the program. I am using an iMac with the latest software updates, and a Canon 6700D printer which works fine with anything and everything else including iPhoto. When I get ready to print and image, I open File> and then Print Image since Print is grayed out. When I click on Print Image I get a Screen that has Printer Settings as an option where I could specify Media, Quality etc. However, When I Click Printer Settings, nothing happens. Anyone have any thoughts about this? I don't want to buy the program without looking at the out put.

Bu sure you have the latest system update if you’re working with leopard. There has been an antremediate Security Update that lead to exactlyte problem you described and was fixed with the latest system update.
Cheers
Holger

Accessing Profile Option

Hi,
I have a validation to be made in the Controller of a OAF page.
If the uSer is Logged in with XYZ Responsibility and if the value for a Custom Profile OPtion for that Responsibility is 'True' ... Do certain things.
How to achieve this? How to get the responsibility name and the value of a profile option at responsibility level for that responsibility?
Thanks

pageContext.getProfile("<Profile Name>")
You need not specify responsibility. Framework is smart enough to get the profile value based on the current responsibility context.

Complaints on new FIOS and especially tech support

I had FIOS installed a week ago and have already experienced an outage of my internet and phone for nearly 36 hours. Actually I'm stil not sure if it was an outage as I got several excuses from Verizon. My main issue comes with calling tech support (TS). It's nothing like dealing with verizon wireless which is a piece of cake. Calling Verizon to order or possibly order FIOS is very easy. They answer and WANT to talk with you. Calling tech support is another story. Twice I finally hung up after being on hold for over 30 minutes. The people on TS are nice and professional so the complaint is on Verizon and it's system. It would seem the left hand doesn't know what the right hand is doing when it comes to handling these issues. Notwithstanding I am a new customer and already don't have much faith in my FIOS purchase based on this 36 hour outage. I also cannot get in touch with TS and when you do be prepared to get various and conflicting answers. I'm not sure what I hope to hope accomplish here by doing this but someone in corporate needs to see these complaints and do something about this. Anyone ever see the commercial about the banks and all kinds of excuses being made about not being responsible for the issue. Well this is somewhat Verizon. (I got a phone call from Verizon as I type this and I let the machine take it-Verizon president left me an automatic message saying he's sure I'm already enjoying the FIOS services.) Oh brother.

No need to call. The issue was resolved today regarding the phone and internet being down. My main issue is the inability of getting in touch with tech support without waiting forever. This needs bigwig attention and action.

Very very upset with Verizon service and tech support. Ready to cancell

I have been on the phone and live chat for over 10 hours with several different tech people. Each one says they have fixed the problem but to no avail. I am really really upset about this and would like to talk to some who can FIX the problems. I am ready to cancel Verizon all together.

My email was hacked. So I did live chat and they told me that I needed to change my password. So I did. When I went to sign on again it wouldn't let me. So I did live chat again they tried for about an hour via access to my computer, could not figure it out. Then I was told that Verizon is no longer going to associate with Yahoo that I need to just go thru Veizon. This person did not know how to do that so I called and talked to a Rich {edited for privacy} he tried to fix this again via access to my computer to no avail. He told me that he would have someone call me back the next night who could fix this. No one called me the next night. I called again I tried to get back with Rich but the person said I could not do that. So I began again explaining my situation, this person said that I would need to update my router, but of course it was going to cost me an additional $10.00 a month. So I ordered the new router. I was then transferred to James {edited for privacy} he transfered everything from my Yahoo account and was going to set it up under Verizon. He could not get the information transferred so he told me that someone would call me back the next night to help me. No one called me back. I received a phone message from Jack that he cancelled my Yahoo account but I couldn't understand what he was saying because he was cutting in and out. Called again and told the person that I was having trouble again and that I been having the same problem for awhile and wanted to talk to a supervisor. I was told that she would send me an "escalation email" and I would be able to get help right away. When I tried to download this email it takes me to Photo Shop??!!! Was then transferred to Dan. He told me that my files, contacts from Yahoo were gone. He tried via access to my computer and said there was no way to get my files back. He told me that this should not have been done like this. After about 3 hours on the phone with him he was able to get my files back but all my contacts were gone. I now have Verizon email but is not working properly. My phone is no longer connected to my computer all my notes are gone, etc. I was told my router would give me faster internet speed 75/75. My computer is slower now then it ever has been, just signes out in the middle of doing something. I did live chat again to question my internet speed and was given a link to check my speed. It came back as 47.48 dowload and 44.78 for uploading. When I questioned why it was not 75/75 he said something must be wrong.
I have ask several times for a person to come out and fix my computer but am told it must be fixed on the phone by tech support. I have tried several times and it is not working. I have been a customer for over 15 years and I have never had such poor customer support. I just want my computer back to the way it was before.

Staying Safe and Secure With Verizon's Premium Tech Support, Online Security, Cloud Storage Solution

NEW YORK – No one wants to worry about online threats or how and where to store their many files. A new solution from Verizon will ease these concerns.
The Security, Support & Storage Bundle provides Verizon small-business and residential customers with comprehensive protection from viruses and malware on many connected devices; premium tech support to help keep customers’ technology running smoothly; and cloud storage for files, videos, photos and more.

All I have to say about that is, "People fear what they do not know." Everyone has a comfort zone. Some people's comfort zone is larger than others, or encompasses different aspects of life. Most Windows users aren't comfortable with Mac or Unix operating systems. Most English speakers aren't comfortable with foreign languages. Most two-year-olds aren't comfortable with spinach.
C'est la vie.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Odd Startup behaviour and cannot access tools- options menu

As of this morning my installation of LV8 will not display the normal startup dialog box (allowing you to open existing VIs or open a new one), but simply opens a new VI immediately. If I close this new NI then again instead of returning to the start up dialog it opens a second new (blank) VI.    Furthermore I cannot open the Tools->option menu from within a VI front panel.
I've tried repairing the LV installation and when this didn't work I went for a full remove and reinstall - still no joy!
I've also check that this is not user specific, so that when I log in as a different user on the same PC I get the same behaviour
Help - please !!
Solved!
Go to Solution.

Hi AMHurrel,
This sounds rather strange.
Did you change anything on your setup?
When you say you did a full remove and reinstall, how?
These are the steps I would follow:
The following procedure will remove the National Instrument Software:
1.     Turn off the computer and physically remove or unplug all NI hardware that you have installed on your system.
    This includes anything that is PCI-, ISA-, USB-, 1394-, or ethernet-based.
2.     Turn the computer on and go through Add/Remove Programs (START » SETTINGS » CONTROL PANEL » Add/Remove Programs)
    and remove everything NI-related. Generally, if you can remember, it is best to uninstall things in
    the reverse order in which they were installed. For example, if you installed LabVIEW, then NI-DAQ, and then the
    Internet Developers Toolkit for LabVIEW, you should uninstall the Internet Developers Toolkit first,
    then NI-DAQ, and then LabVIEW last.
3.     After everything has been removed (do not be concerned at this point if an item still shows up in the
    Add/Remove Programs list after you have removed it), close all programs and restart your computer.
4.    Go to START button of your operating system, choose RUN and type "regedit". This will open the Registry
    Editor window. Go to the Registry Menu and choose Export Registry File. Select "All" for the export range,
    and select a file name. This creates a backup of the Registry in case a mistake is made when deleting the keys.
5.     Remove the following registry components from the Windows Registry:
    HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any
    keys with 1093 in them.
    Do not worry if any of these trees are not listed. Continue with the remainder of the process .
    Note: You may need to modify security policies. In Windows 2000/98/95/NT, go to [regedt32] then
    Security>>Permissions. In Windows XP you can modify security options using Edit>>Permissions in the
    Registry Editor (regedit).
6.     Close regedit.
7.     Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp",
    "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
    different location. If you are concerned about keeping old virtual channels and your SCXI setup intact,
    then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
    Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
8.     Save the attached file msiBlast.zip to your desktop.
    a) Extract the file msiBlast.exe from the zip archive.
    b) Double click on the downloaded msiBlast.exe file to run the executable.
c) Choose the Show NI Installers Only selection.
d) Using (Ctrl+Left Mouse Click) select all National Instruments Software that appears in MSIBlast.
e) Press the Uninstall button. This will uninstall all of the National Instruments MSI Registry entries.
f) Optional:
The Repair option will open the National instruments Installer Program and run the repair option within the installer.
Maintenance Mode will open the Installer Program and allow the user to modify the installation. To open the installer do not enter anything in the Command Line Arg? Dialog box.
9.     Reboot your computer.
10.     You should be ready to install your software. For the cleanest possible install, first install all of your
    application development software, such as LabVIEW, Measurement Studio, etc. Do a custom install, so that you can
    install just the application WITHOUT ANY DRIVERS. Reboot your PC when requested after each install.
    Even if the installer does not tell you to reboot, it would probably be a good idea to do so anyway.
    Now install your driver software and follow the associated user manuals. Some older non Plug-n-Play hardware
    must be installed before the driver. Download the latest versions of the drivers that support your hardware
    from our Drivers and Updates software library (link below), and install them one-by-one, rebooting after each
    install.
11.     Finally, shut down and re-install your hardware. When you boot back up, it should be detected in MAX.
NI Drivers Link : - http://www.ni.com/softlib.nsf
**Attached is msiBlast.
***Do you get an error messages?
Let me know what you think,
Kind Regards
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

How do I get FF to focus on a new tab? I right-click and choose "Open in New Tab" and the Tab appears in the Tab bar but I cannot access or see the new page.

I open FF ver.10. My Home page is Google Search. I use a Bookmark and open, say, Hulu.com. I select a link by right-clicking and choose "Open in New Tab" The little tab in the tab bar opens but I am still viewing the Hulu.com main page and cannot view the new tab.
This happens even if I use middle-click to open a new tab. It happens with all links on any website I visit.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Cannot Access Profile Options in New Verizon Webpage - Poor Tech Support

Similar Messages

Maybe you are looking for