Cannot acquire a managed connection

Dear All,
I am very new to the SSIS package development so please point out my stupidity If I have done any. I am trying to ETL data from excel spreadsheet to SQL server using Excel data connections and OLE DB and ADO.Net data connection. I am using CDC task to monitor
any changes done in the source excel file. I am doing it in a way same package extract information from the spreadsheet and import in to Server 1 (CDC enabled) and compared it to the same table hosted on another server 2 which is a production server.
When I run this package on DTS it runs fine and I am able to generate Deployment Manifest file. When I try to run the same Manifest file I am getting below error
Error: Failed to Decrypt an encrypt XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
Error: Cannot acquire a managed Connection from the run-time connection Manager
I have change the package encryption level from "EncryptSensitivewithUserkey" to "EncryptsensitivewithPassword" and have added password to the PackagePassword it the package property and saved this project.
when i add this package to the SQL agent job I am still getting below error message
Message
Executed as user: administrator. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:44:49 Error: 2014-12-04 11:44:52.10
Code: 0xC020801F Source: CDC Control Task CDC Control Task Description: Cannot acquire a managed connection from the run-time connection manager. End Error Error: 2014-12-04 11:44:52.10 Code:
0xC0024107 Source: CDC Control Task Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:44:49 Finished: 11:44:52
Elapsed: 2.215 seconds. The package execution failed. The step failed.
Please help I am stuck on this issue from last 2 days now. If you need more info please let me know.
regards
JK

Looks like you run the package in thee Agent for this purpose you should use the 'Rely on server storage for encryption' (ServerStorage) protection
In the "EncryptsensitivewithPassword" scenario you need to provide the actual password by editing the command line in there:
with adding switch /De <password> to it
Arthur
MyBlog
Twitter

Similar Messages

SSIS 2012 OData - Cannot acquire a managed connection

I have an SSIS project in SQL Server 2012 deployed via VS 2012 SSDT-BI.
If I run this from my local SQL Server it works correctly, however if I push it to another server and run it I always get a
Cannot acquire a managed connection from the run-time connection manager.
The connection looks like this..
Document Url=http://myodata;Include Atom Elements=Auto;Include Expanded Entities=False;Integrated Security=SSPI;Persist Security Info=False;Time Out=600;Schema Sample Size=25;Retry Count=5;Retry Sleep=100;Keep Alive=True;Max Received Message Size=4398046511104
Any ideas?
Paul

Can you try passing "User ID" and "Password" instead of "Integrated Security=SSPI"?
Example,
Base Url=http://dynamicsnav:7048/dynamicsnav70/OData/;Include Atom Elements=Auto;Include Data Services Content=True;Include Expanded Entities=False;Namespaces to Include=*;Integrated Security=Basic;User ID=navadmin;Password=**********;Time
Out=600;Persist Security Info=False;Schema Sample Size=25;Retry Count=5;Retry Sleep=100
Regards, RSingh

Xsql setup problem. 'Cannot acquire a database connection to process page.'

This is probably a really basic problem, but I am getting the following error when I try to use the xsql demos.
Oracle XDK Java 9.2.0.2.0 Production
XSQL-007: Cannot acquire a database connection to process page.
Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
I really don't know what I am doing wrong, so any help would be appreciated.
My jserv.properties file:
wrapper.classpath=s:\xdk_java\lib\xsu12.jar
wrapper.classpath=s:\xdk_java\lib\oraclexsql.jar
wrapper.classpath=s:\orant\jdbc\lib\classes12.zip
wrapper.classpath=s:\xdk_java\lib\xmlparserv2.jar
wrapper.classpath=s:\orant\xdk\admin
Thankyou
Adrian

hehehhe
I had the connection wrong in the XSQLConfig.xml file.
It's all working nicely now.
Ade

XSQL-007: Cannot acquire a database connection to process page.

Just getting started with XSQL with Oracle 8.1.7. Ran the
helloworld demo and got XSQL-007 error. How do I map
connection="demo" to a database service or SID name?

I ran into somthing similar earlier. Checked an article off
ORAMAG, january 01 called 'Generating XSQL Server Pages'.
(http://www.oracle.com/oramag/oracle/01-jan/o11xml.html)
I found that if I verified the settings in the jserv.properties
file under Apache, and also verified the connetion info in the
XSQLConfig.xml file (Do a search) that you can eliminate the
issue. (I was using JDeveloper 3.2.3, and have some trouble with
JDev 9i, but I assume you can get some good info none-the-less
from this article).
Best of luck.
Scott Rappoport, OCP
AT&T Enhanced Network Services

Unable to get demo's working, "XSQL-007: Cannot acquire...."

I must be missing something simple but when I try to run the demo's I get the following error...
XSQL-007: Cannot acquire a database connection to process page.
Io exception: The Network Adapter could not establish the connection
My XSQLConfig file has the following connection information:
<connection name="demo">
<username>scott</username>
<password>tiger</password>
<dburl>jdbc:oracle:thin:@localhost:1521:ORCL</dburl>
<driver>oracle.jdbc.driver.OracleDriver</driver>
<autocommit>true</autocommit>
Do I need to upload anything to an ORACLE table to get the demo's working?
Thanks in advance...
Stephen

- Can you connect your database using your JDBC connection string?
"jdbc:oracle:thin:@localhost:1521:ORCL"
- What is your SQL query?
null

Cannot find the Novell Connection Manager for LDAP

Novell Connection Manger for Java/LDAP
Cannot find the Novell Connection Manager for LDAP in download
I am trying to connect through a Java client to the Apache Directory Studio, LDAP server....I have downloaded the classes from the download page...see link below...but I can't see the NovellConnectionManager Class anywhere in this download when I use the open freely application to view the jar details.
LDAP Classes for Java
Environment: Windows 7

Hi MentalSuplex, and a warm welcome to the forums!
Don't know about Airport cards for it, but other options...
http://eshop.macsales.com/item/Sonnet%20Technology/N80211PCI/
Maybe this one, ask them...
http://eshop.macsales.com/item/Newer%20Technology/MXP802NPCI/
I use these...
http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
http://eshop.macsales.com/item/Edimax/EW7711UMN/

HT204266 App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop

App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop. Need help!!

For the App Store icon check Settings>General>Restrictions. You may have restricted the installing of apps and the icon will disappear.
If that's not it, swipe from screen to screen as you may have moved the icon.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.
More information is needed about the apps not syncing or downloading. Are you signed into the same ID on the iPad as your are using in iTunes on your computer and are you talking about iTunes on the computer being the problem?

"Radio Off" and cannot be turned on via "Manage Connections"

Hey all, hoping someone has seen this before on the Curve. I ran low on power and the radio shut off, but now no matter what I do that has previously worked, (Make a call/go into manage connections-"Turn on all connections") the radio won't turn on.
Any ideas or tips before I commit BlackBerrycide?
Solved!
Go to Solution.

That happened to me before too when the battery ran real low and I wasn't able to turn it on until the battery was over 25%. Have you charged the phone?
~Lorrie~ Master of All Things Blackberry!

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Manage connections disabled

Hi,
We are in SAP BOBJ 4.0 sp04 patch 4.9 and crystal reports for enterprise 4.0 client installed in win 7.
While opening an existing CRE report not able to change the manage connections/ select any connections, please see the attached image.
1) Please advice, If its access rights issue or needs to remap obects and save report it in our name.
2) Cannot even open a locally saved CRE report, Is something missing while saving local copy ?
Please advice.
Regards,
Venu. K

Hi,
I think it an issue with the License keys. Check out what all features does your License Key support.
I had a problem where I wasnt able to see all types of connections, only few of the connections (QaaWS & Live Office etc) were visible and it was a License issue.

OEDQ Jobs erroring - Error Code: Cannot acquire lock, already locked

Hi experts
our Real time Individual match job is erroring out with above error code. Real time Individual clean and Real time Individual Cluster are working fine. What could be the reason for this?
(log file extract:
SEVERE: 06-May-2013 14:54:39: Cannot acquire lock: already locked (Code: 207,002)
com.datanomic.director.missionmanager.exceptions.MissionExecutionException: Cannot acquire lock: already locked (Code: 207,002)
     at com.datanomic.director.missionlieutenant.plan.MissionExecutionPlan.execute(MissionExecutionPlan.java:961)
     at com.datanomic.director.missionlieutenant.executor.MissionExecutor.runMissionNow(MissionExecutor.java:205)
     at com.datanomic.director.missionmanager.manager.MissionManager$3.run(MissionManager.java:537))
second question:
we do have setup OEDQ for key generation (Our Siebel OCH is on 8.1.1.10). When we run Siebel Key Generate jobs on Contacts and Accounts, we do get records created in SIEBEL.S_DQ_ORG_KEY and SIEBEL.S_DQ_CON_KEY. Is this table where they are supposed to be generated?
third question:
Does Siebel OCH support Address matching?
more questions to come in near future
THANKING YOU IN ADVANCE!!
rgrds
m
Edited by: user3035423 on 6.5.2013 8:18

Hi Nick. thanks for your reply.
I am newbie to the OEDQ. When you say that proces is open in Director, what does it mean? How can i close it?
In order to overcome this situation i did
1. stop datanomic service on Win2003 server
2. started Job Main Initialize reference Data in EDQ-CDS - initialize Reference Data project and waited to finish
3. started Job Real- time START ALL in EDQ-CDS project
4. this is the step where some of the jobs are errorong out, as stated before
From above to mee it looks like there should not be any process open in Director.
can you please share your thoughts
thanks
rgrds
m

Network Printer - Cannot Acquire a Lease through DHCP

TL;DR: Changed ISP and printer does not/cannot acquire a lease from new modem/router. I haver an Hp LaserJet 4050 with an HP 615n 100BASE-T NIC. This setup would acquire a lease and work flawlessly through an AT&T 2WIRE router. No special setup was needed other than enabling DHCP/BOOTP on the printer. I then moved to an area not serviced by AT&T. My new provider, CableOne, provided me with an Arris Touchstone Gateway. All of the computers on my LAN will acquire leases without issue, but the printer will not. I've looked at every setting available through my gateway's web interface and can find no setting that will permit the printer to acquire a lease or would otherwise cause/fix this situation. I have reset the printer settings to factory defaults. The TCP/IP section of the configuration settings on the printer will show the default IP of 192.0.0.192; the status will show "55 - BOOTP/DHCP IN PROGRESS" The printer's NIC is communicating, as Wireshark will show IGMP messages from the printer to a couple of different multicast addresses. Any hints in diagnosing are appreciated. If further info is needed, please let me know.

Hello sabretooth04, thanks for your reply. I thought I had provided most of that information, but here goes: Detailed problem description - see original post - too detailed to repeat. OS of computer: I have seven different OSs on this LAN, including OpenBSD, FreeBSD, Arch Linux, Gentoo, slackware, and windows Vista, SP2. Connection is ethernet. Make and model of modem: Make: Arris; Model: Touchstone Data Gateway. Error messages: none. Printer has been powered off/on multiple times to no avail. The printer is sending DHCP Discover requests (multiple) but not receiving a DHCP offer from the router/modem. So the question is, what is wrong with the network/router/moden that it will not respond to the DHCP Request?

Manage Connections Bluetooth (Microsoft) but Wid...

I am trying to get PC Suite to connect to my 6021 using Bluetooth. Widcomm BT Manager connects to phone OK but when I launch PCS and click 'Manage connections', 'Connections Available' shows Bluetooth (Microsoft). I have the Widcomm BT stack 5.0.1 installed. If I click configure > Next, I get: 'Cannot use the connection type. Check that all the needed hardware, software and drivers are available.'
Although I have SP2 I can see no way installing the SP2 BT driver.
Any help would be mopst appreciated, ta.
What version of Windows is being used: XP
What Service Pack is installed: SP2
What version of PC Suite is installed: 6.80.21
Connection method, is: Bluetooth.

Thanks Manta.
You have solved my problem, I now have full connectivity.
Again, thanks a million my friend.
Dave.

Cannot locate policy manager query/update service

Hi,
I installed soa_server 11.1.1.4.0 on windows server 2003 machine, I got a weird issue while accessing the weblogic policy manager through em. I logged into em console, weblogic domain, domain, webservvice, policy throw this erro below
"*Cannot locate policy manager query/update service. Policy manager service look up did not find a valid service, due to: Unable to connect to WS Policy Manager. <- oracle.wsm.policymanager.PolicyManagerException: WSM-02118 : The query service cannot be created. <- javax.naming.NameNotFoundException: While trying to lookup 'QueryService#oracle.wsm.policymanager.ejb.IStringQueryServiceRemote' didn't find subcontext 'QueryService#oracle'. Resolved ''; remaining name 'QueryService#oracle/wsm/policymanager/ejb/IStringQueryServiceRemote'*"
even my wls-m is running , I can access the http://host/wls-pm.
Last three days I have spend for this issue but no clue.I disabled SSL, enable with SSL host validation false but also get this error.Please sort out this issue.
Thanks
Govindan

Problem solved.
Soln:
Given ip address in the Listen Address field of weblogic Admin and SOA server. :)
Thanks
Govindan P

Cannot acquire a managed connection

Similar Messages

Maybe you are looking for