Cannot activate 3.5 transfer structures after BI system copy

We have just completed our first BI system copy (database-specific) from our BI-Production to BI-QA system to refresh database.  Have followed the Homogenous System Copy Procedure provided by SAP for Netweaver 7.0, DB2 for LUW.  Have been able to reactivate all 7.0 content, but 3.5 transfer structures cannot be activated because the transfer structure tables are not in the ERP QA source system.  All 3.5 transfer structures were working prior to the BI system copy.  Can anyone provide some guidance.  Have issued an OSS Note with SAP, but that can take some time to get resolution.  Is there any other resolution than converting 3.5 to 7.0 as this is half of our data?
Thanks for your response!

See SAP Note 493422.  Works like a charm.

Similar Messages

  • Cannot activate with my serial number after Harddisk crash

    My harddisk crashed, I installed my dreamweaver MX2004 from my orginal disk.
    I entered my serial No. - but activation didn't work.
    I tried to activate by phone - not successfull, phone no. doesn't exist.
    Is there a german telephone number for activating this product?
    Thanks for urgent help - and sorry for my bad english
    Anga

    THANK YOU!!!!! Seems to work J
    Best regards
    Annette Gallas
    Von: Dave Merchant [email protected]
    Gesendet: Samstag, 20. Juli 2013 15:39
    An: webhexe
    Betreff: Cannot activate with my serial number after Harddisk crash
    Re: Cannot activate with my serial number after Harddisk crash
    created by Dave Merchant <http://forums.adobe.com/people/Dave+Merchant>  in Dreamweaver CC - View the full discussion <http://forums.adobe.com/message/5522897#5522897

  • Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy

    Hi all,
    We had an issue after system copy.
    After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
    Found the issue is caused by u201Cmore than one versionu201D of the change log.
    We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
    We had the solution like this:
    After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
    Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
    for the system refresh.
    We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
    Thank you very much for your information and suggestion.
    Heming

    Hi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled  by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
    And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
    So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
    Anybody has the same situation after executing the above mentioned SAP std report ?
    Regards,
    Joaquin Casas Baca-Castex

  • ST02 shows multiple servers after heterogenous system copy

    We're facing a strange behaviour in ST02 after a system copy using MaxDB backup/restore with SWPM (backup was from our production system). When we click on history, no data is shown:
    We have to click on "-> Server", then the data is shown:
    Does anyone know how to make history work?

    Hello Alwina,
    Thanks for the help.
    Mine is EHP7 NW 7.4, standard system, cent serv instance(Mes Serv & Enqueue server), primary app server (Dia Bg Up Spo) runs on the single host along with Oracle DB 11.2.0.4.
    In my rest of the systems also I have the same notations, server name its in upper case and hostname is in lower case (ofcourse they are of other netweaver release) for SM51.
    niping results
    Hostname/Nodeaddr verification:
    ===============================
    Hostname of local computer: EUSAPADHR01                      (NiMyHostName)
    FQHN of local computer: EUSAPADHR01.dfs                      (NiGetOwnFQDN)
    Lookup of hostname: EUSAPADHR01                              (NiHostToAddr)
        --> IP-Addr.: 10.170.83.88
    Lookup of IP-Addr.: 10.170.83.88                             (NiAddrToHost)
        --> Hostname: eusapadhr01.abc
    Lookup of hostname: EUSAPADHR01                              (NiHostToAddr)
        --> IP-Addr.: 10.170.83.88
    Lookup of IP-Addr.: 10.170.83.88                             (NiAddrToHost)
        --> Hostname: eusapadhr01.abc
    Yes initially it gives 8 characters in the text.
    But in the actual values it is like eusapadh_HRP_40..
    Hope you understand my case.
    Ok so implementing the note would fix this ST02 history issue - confirm?

  • How to stop jobs after a system copy

    Hi All,
    After doing a system copy from the Production system to some test system, all the jobs that are supposed to be triggered in the production server will also trigger in the test system which is not good.
    For example, If we have a payroll running every month. After i do a system copy the same payroll will also be triggered in the test server which is un acceptable.
    How do we go about it and what are all the steps that we need to follow after a system copy?
    Points will be rewarded.
    Thanks
    Vijay

    Hello Vijay,
    you surely need background processes in a running system.
    But you can start a SAP system without any background processes.
    When the system is up you go to sm37 and delete (or de-release) all the jobs you don't need in the target system. Then set the number of batch processes to the amount you want and restart the system.
    Alternatively you can prepare your source system accordingly with the SAP System Copy Guide - Section 3.2 Technical Preparations:
    "Set all released jobs from Released to Scheduled:
    Tools -> CCMS -> Background Processing -> Jobs - Overview and Administration (transaction SM37)
    You also need to do this for jobs that must run periodically (see SAP Note 16083).
    Select all jobs (include start after event) as follows:
    Job -> Released -> Scheduled"
    I think the best way for you is to read this guide!
    Everything is explained very well there.
    Goto:
    https://service.sap.com/systemcopy
    In the left tree select:
    -> SAP Netweaver
    -> SAP Netweaver in Detail
    -> Software Life-Cycle Management
    -> System Copy & Migration
    -> Media Library
    There are all the Guides for the current releases.
    Regards, Michael
    Message was edited by:
            Michael Teubner

  • Is there away to activate all Transfer Rules after a client copy at once?

    Our Basis team recently created 2 new clients from copying our existing dev & qa systems they then changed the partner profiles and source systems to point to our new ecc clients but we now cant get anything to run without activating transfer rules trying to do this one at a time twice is going to take a long time is there anyway of doing this en masse?

    Hi
    you may have to use following FM too
    RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
    RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
    and then
    RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
    Regards
    Sudeep

  • Error when creating transfer structure in source system

    We have just had a copy of the ERP production system done and connected it to our existing QA system (done by our service providers) for a test go-live of our ERP upgrade.
    Now I cannot activate the transfer rules as the transfer structure cannot be created in the source system.
    I have checked the settings in table RSBASIDOC and they look okay, I can only assume that our wonderful basis people have done everything they should have but cannot be sure they've done it all correctly.
    The sourcesystem is active, the RFC's are fine.
    And help for a desperate man please. I've got to get this working in 1 day as basis need the system back to do an Oracle upgrade.

    Hi Jonathan,
    Try to replicate the DS once again and the run the program RS_TRANSTRU_ACTIVATE_ALL to activate your transfer structure. Hope it helps.
    Thanks and Regards
    Subray Hegde

  • "Table VSEOPARENT is not in the database" after SolMan system copy to x64

    Hi SDNners,
    We've just completed a system copy of our SolMan 3.1 system onto a new
    (Xeon x64 based) server. This system copy is part of the process of
    moving SolMan 3.1 from an old server onto 64bit hardware and then
    upgrading it to SolMan v4 and Oracle 10G.
    Although the system appears to start properly in the MMC, we are unable
    to log into the system through SAPGUI - we get a SYNTAX_ERROR window
    instead of a logon screen.
    I've checked the SysLog from within the MMC and noticed a number of
    errors stating:
    Database: Table VSEOPARENT is not in the database
    Database: Table VSEOIFIMPL is not in the database
    Database: Table VSEOIFCOMP is not in the database
    I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
    it confirmed that the table didn't exist. I then ran the same command
    on the source SolMan system and it showed that VSEOPARENT DID exist. I
    don't understand how these VSEO* tables could have gone missing between
    the source and target systems.
    I've searched OSS for VSEO* and cannot find anything. Please help!
    Thanks,
    Arwel.

    We have 640 kernel, ECC 5.0 and BASIS patch 23.
    For me the problem was with SAPVIEW table wasnt imported from source to target becuase SAPVIEW.STR file was 0 byte. STR files gets created in export preparation phase.
    It did happen because on source side master DVD, there was no option for export preparation. I had only option for tablesplit and export db.
    I did use ECC 5.0 SR2 Master DVD which had option for export preparation phase and that created SAPVIEW.STR file.
    Using migration monitor I did re-export and re-import and this time all views are imported in target.
    Regards,
    Mamadi.

  • No username of Source system is avbl after livecache system copy

    Hi Experts
    I have done a livecache system copy from the source system to target system. Here the steps are
    Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
    1. Taken Source system livecache DATA and LOG Area backup RP1.
    2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
    3. put the livecache db_admin mode
    4. db_activate RECOVER <medium_name>.
    5. recover_start <log_medium_name> LOG <nnn>
    6. db_online.
    Here we faced that
    ERR
    -24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
    -24907,ERR_DBAWRONG: Wrong database system administrator
    -24988,ERR_SQL: SQL error
    -4008,Unknown user name/password combination
    So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
    then it came to online. and afterwards we have used the load_systab command to load the tables.
    BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
    Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
    But now in this restore we could not find the above.
    We followed the same procedure and there is no change in the steps also.
    Could anyone help me...
    Regards
    bala

    Hello Bala,
    1. As I wrote you already, the notes:
    886103 System Landscape Copy for SAP SCM
    877203     Post steps after the Homogenous liveCache copy using backup/
    457425     Homogenous liveCache copy using backup/restore
    has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
    2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
    To update the system tables you need to know the correct database SYSDBA user & password.
    After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
    user & password.
    Example:
    after db_activate recover <medium_name>
    login as control,password
    db_online
    sql_execute select * from users
    sql_connect  superdba,<password of source system>
    If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
    The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
    3.     
    user_sysdba:
    You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
    u201CI have tried like this
    after db_activate recover <medium_name>
    login as control,password
    db_admin
    user_sysdba superdba,<password of source system>
    db_onlineu201D
    You could update the .upc files with the wrong SYSDBA user password u2026
    You was lucky, that you knew the correct SYSDBA user and password of the source database.
    Example  < NLK is my local database >:
    A.     I could update the .upc file with wrong password of SYSDBA user:
    dbmcli -d NLK -u control,control
    dbmcli on NLK>user_sysdba superdba,test
    OK
    dbmcli on NLK>db_online
    OK
    dbmcli on NLK>load_systab
    ERR
    -24909,ERR_DBAUNKNOWN: SYSDBA unknown
    dbmcli on NLK>exit
    B.  I could update the .upc file with wrong SYSDBA user:
    dbmcli -d NLK -u control,control
    dbmcli on NLK>user_sysdba test,test
    OK
    dbmcli on NLK> user_get test
    OK
    u2026
    dbmcli on NLK>sql_connect test,test
    ERR
    -24988,ERR_SQL: SQL error
    -4008,Unknown user name/password combination
    dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
    OK
    I could connect as test,test; but the test user is NOT SYSDBA user u2026
    dbmcli -d NLK -u test,test
    dbmcli on NLK>
    Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
    you will get error.
    4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
    You got error:
    ERR
    -24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
    -24907,ERR_DBAWRONG: Wrong database system administrator
    -24988,ERR_SQL: SQL error
    -4008,Unknown user name/password combination
    The automatically updating the system tables, according to the default value, is switched on.
    After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
    and with the next liveCache restart you will not get this error.
    5. See more information in the MAXDB library:
    http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
    Thank you and best regards, Natalia Khlopina
    Edited by: Natalia Khlopina on May 19, 2010 2:58 PM

  • Update integration directory and repository content after PI system copy

    We are on PI 7.1, We are trying to figure out the best way to update the contents in sld, integration directory and repository after system copy. currently we delete everything in sld, ID and IR then reimport all the content to get everything in-sync. Is there an easier way to do it, ex. just update the system in sld and the matching contents in IB and IR?
    Thanks,
    Jane Zhou

    Hi Jane
    This completely depends on the nature of the system copy and your SLD architecture and operational requirements
    Will the source system remain available or operational ?
    Is the target SLD proposing to use satellite systems already defined in the source SLD ?
    When doing a system copy the following should be considered
    1) If you create an import line from a previous SLD via export or sync
        - that SLD has to continue to be available for further updates or sync
    2) If you create a system copy, any target specific configuration like hostname, port, SID
         may needed to be adapted in target landscape
    3) Further considerations are needed if 1 satellite will point to 2 SLDs at the same time both for operational use
    Its very easy to take a back-up or full or partial import from one SLD and put it into another or indeed sync between SLDs
    however the key is to ensure the target SLD content is consistent and useable in the same way as the source SLD
    Hope this helps
    Stuart

  • DB13 SQL error -942  after homogenous system copy

    Dear all,
    I've performed hpmogenous system copy from the productiion system running on ECC 6.0 Oracle 10.2.0.4 and HP-UX 11.31.
    Then after finishing all post homogenous system copy activites I've tried to start check db in DB13 and I got this error message.
    In sqlplus from the server I checked this SELECT and it shows the appropriate rows. But from DB13 there is the error message.
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000360, user ID RPO)
    Execute logical command BRCONNECT On host sapds
    Parameters: -u / -jid CHECK20111024152519 -c -f check
    BR0801I BRCONNECT 7.00 (52)
    BR0477I Oracle pfile /oracle/TST/102_64/dbs/initTST.ora created from spfile /oracle/TST/102_64/dbs/spfileTST.ora
    BR0280I BRCONNECT time stamp: 2011-10-24 15.25.24
    BR0301E SQL error -942 at location BrLicCheck-51,SQL statement:
    'SELECT COUNT(*), NVL(SUM(BLOCKS), 0) FROM SYS.SEG$ WHERE USER# = 28'
    ORA-00942: table or view does not exist
    BR0806I End of BRCONNECT processing: cehbjvyf.chk2011-10-24 15.25.24
    BR0280I BRCONNECT time stamp: 2011-10-24 15.25.25
    BR0804I BRCONNECT terminated with errors
    External program terminated with exit code 3
    BRCONNECT returned error status E
    Job finished
    Does anyone knows why?
    Thanks in advance.
    Ruzica

    Solved
    sapdba_role needed to be performed again
    sqlplus /nolog @sapdba_role R3
    This solves the problem
    Ruzica

  • Infopackages are missing after an system copy from Prodution to Quality

    Hi SAP Gurus,
    After an DB copy, from BW Prodution to Quality, the infopackages are missing.
    Can anyone can tell me how to get the infopackages from PRD to QAS.
    Thanks,
    Pedro Martins

    Hi
    Casue for package missing
    In some cases infopackages will be missing because of the INIT Delta infopackage will be copied againg from  Production were duplicates are created for the same Init. so in such cases the package will be missing
    During DB copy if any infopackage are created in production at that point of time the system will not take that package into consideration
    inorder to get the package we can do reverse transport (from production to Quality)
    follow the steps as below
    Transporting from BWP TO BWQ : Reverse Transports
    Step1
    Create request in Source System (Eg: BWP) say A and  Collect required objects (infopackage)into request A
    Step2
    Goto TCode : SE09/SE10 --> create a transport of Copies request B (give the user name and tick on transport copies just below the workbentch request)
    Step3
    Check, check box for Transport of Copies and click Create , now the system will prompt one more screen
    Step4
    Now choose Transports of Copies and continue.
    Step5
    Enter required Target system(F4 help available) Eg: BWQ.
    Step6
    Unlock Objects(Tcode : SE03) from Request A and Move Objects to Request B(Tcode SE10).
    Step7
    Delete objects from Request A
    Step8
    Relase the request B (se09)
    Step9
    Now log on to the Target System(Eg: BWQ) import Queue and import request.
    Step10
    In BWQ queue go to menu Request >Forward> give BWD or
    you can directly provide BWD as Target System in Step 2
    Step11
    Go to BWD and import the request.
    santosh

  • System does not come up after homogeneous system copy

    Hi there,
    after a regular system copy of our Java-only Portal the system does not come up.
    'startsap' warns with these messages :
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/jdbdictionary/jddi.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/antlr/antlr.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/system/frame.jar file stated but does not exist !
    and, yes , these really important directories do not exist - under /usr/sap/<SID>/JCxy/j2ee/cluster/server0 there is
    only ONE directory , which is 'apps' .
    database starts, but not the j2ee engine
    OS :Solaris 10, Oracle DB
    I'm confused (i did the system copy 2 times, because I did not believe what I saw ....)
    Regards,
    Ronny

    >
    Sunny Pahuja wrote:
    > Hi,
    >
    > Have you done system refresh with sapinst ?? was it successful or not ?? Could you please paste dev_server, std_Server and dev_dispatcher logs here ?
    >
    > Thanks
    > Sunny
    Hi Sunny,
    thanx for your answer.
    There are NO logs, either dev_server* nor dispatcher.
    the only thing I found were under the work-directory, the dev_jcmon says :
    [Thr  1] Wed Oct 27 11:01:40 2010
    *[Thr  1] *** ERROR => Can't attach to administration shared memory (rc = 3) [jcmonxx_mt.c 228]*
    and the bootstrap says mainly that it could not find the framework :
    [Thr  1] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr  1] JLaunchRequestQueueInit: create pipe listener thread
    [Thr  2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
    [Thr  3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
    [Thr  1] Tue Oct 26 10:00:01 2010
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr  1] CPIC (version=701.2009.01.26)
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java
    [Thr  1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SPE/JC51/exe/jvmx.jar
    That make 'sense', because there is nothing  it could find ..
    Regards Ronny

  • Cannot activate modifications for table structure in SPDD during upgrade

    Hi, all.
    I am now trying to upgrade ECC5.0 to ERP6.0.
    In SPDD screen, some modifications which will be lost are found with yellow traffic signal.
    I have already tried to "adopt modifications", but the results can be categorized to 2 types.
    Type1: Table XXXX was activated with warning. (Some fields were inserted by us.)
      [Warning messages]
      ! Enhancement category for table missing.
      ! Enhancement category for include or subtype missing.
      ! Field ZXXXX does not lie within customer namespace.
      Table ZXXXX was activated with warning.
      Appended table XXXX is temporarily partially active.
    After clicking "back" button on Log display screen, " Adjustment of table XXXX can be completed".
    I clicked "back" and selected "No" in pop-up screen of "Reset to original", the row of the table became green check mark.
    However, when I checked "Versions" to compare "modif" and "active", the row of "modif" did not appear in "Versions of Object XXXX of Type Table Definition" screen, and seems that the modifications will be lost from "delta display" screen.
    Can you provide me the solution of this situation ?
    I guess these Tables in Type1 will be activated and the row of "modif" appear in "Versions" screen, if I could solve the warning, but I do not know how to do it.
    Type2: Modifications cannot be adopted to Table XXXX
      The table which will be changed in "General Attributes"
        -from "Not classified" to "Can be enhanced(character-type)"
        -from "Can be enhanced(character-type)" to "Can be enhanced(character-type or numeric)".
      I have chosen "Adopt modifications", then Phase2 with message "Proposal corresponds to current version" appeared.
    When I click "Back" and in pop-up screen which propose " Reset to original" I clicked "No", then the traffic signal was still yellow.
    How can I adopt modifications for this type ?
    Sorry for long question.
    Appreciate if you could answer above at least one of them soon.
    Best regards,
    Shin

    activate by enter the shadow system
    you can unlock the shadow system using sapup -unlockshd

  • Cannot activate my Macbook air wifi after updating the Yosemite 10.10.1

    after downloading the update OS X Yosemite 10.10.1 the wifi dim out, no way to activate the WIFI

    Weirdly, as I spelled out my query, read through some of the other Yosemite-Bluetooth related posts and switched my device on and off, my speaker started working...
    Well, I am happy now. Thanks to whatever magic hand got this sorted.

Maybe you are looking for