Is there away to activate all Transfer Rules after a client copy at once?

Our Basis team recently created 2 new clients from copying our existing dev & qa systems they then changed the partner profiles and source systems to point to our new ecc clients but we now cant get anything to run without activating transfer rules trying to do this one at a time twice is going to take a long time is there anyway of doing this en masse?

Hi
you may have to use following FM too
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
and then
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
Regards
Sudeep

Similar Messages

Is there any step necessary to be takan after remote client copy

Helllo
I wander generally is there any step necessary to be takan after remote client copy
Thank you in advance

Hi Sunny,
What about changing "Logical System Names", is it not necessary after a remote client copy.
Thanks
Ahamed

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

Derivation Rule Problem After A Client Copy

Hello,
Has anyone ever encountered a problem with derivation rules after a client copy is performed? After a client copy, we have "some" FM and GM derivation rules (not all of them) that have to be manually copied from the source to the target client (line by line by line by line). I'm thinking that there has to be a way to prevent this since some rules are fine after the clent copy. Your input would be greatly appreciated.
Will

I believe that we have resoved our issue. For the derivation rule values that would never copy, we re-created these again starting in DEV and transported the derivation rules throughout the entire landscape (QAS and PRD). Evidently some derivation rules (and the related values stored in the tables) were created directly in Production. During a client copy the values in the tables for the derivation rules that were created directly in our Production environment would not copy to our QAS environment. Those rules were stored in a table named FMFMOAPRD1000122. Note that PRD is in the table name. After re-creating the rule and transporting it through the landscape, the table was named FMFMOADEV1000152 (for example).

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Not able to activate the transfer rule and change the transfer rule plz adv

hello friuends..
i m not able to change my transfer rule . i m getting below msg.
InfoObject 0BASE_UOM of communication structure still being used
Message no. RSAR741
Diagnosis
The deletion of the communication structure for InfoSource 8ZPOS_O13 is not possible. InfoObject 0BASE_UOM of the communication structure is still being used. This use must be undone first.
Concretely the communication structure of an InfoSource can only be deleted if there are no update rules for InfoCubes and no transfer structures for source systems for this InfoSource.
System response
Activity was finished without database change.
Procedure
Check the use of your InfoSource 8ZPOS_O13 in the transfer structures. Delete all existing transfer structures of your InfoSource 8ZPOS_O13.
Check the use of your InfoSource 8ZPOS_O13 in update rules for InfoCubes. Delete all existing update rules for your InfoSource 8ZPOS_O13.
Afterwards, you can delete your communication structure for InfoSource 8ZPOS_O13.
where as i have deleted all update rule for the infosource ZPOS_O13 . but still i m not able to change it .
I have check ed it and it not lock in any req . so please let me know how can i proceed .
Thanks in advance.

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Error while accessing the transfer rules after installation

I get the status " Idoc type in the source system is not available" when i try to access the transfer rules of delivery service ,0sd_c04 infocube. can anyone help me to fix the error.

Hi Hari,
How you installed Transfer rules, is it through BC.
Check the Data Structure in Info Source , whether all fileds are available or not.
First delete Transfer structure and again propose the transfer rules, activate it.
Let us know status.....
Reg
Pra

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Restore transfer rules after source system deletion

Hello,
due to several reasons I had to cut source system assignment.
The source system is now new connected to BW.
My transfer rules and datasources are lost.
Is there a programm, t-code, ....available to restore that stuff?
Points will be assigned.
Best regards.
Pascal

Hello,
Just go to transaction rsa13 right-click over your source system and choose "Restore"
Diogo.

Apps and movies won't open under my old itunes msn id, but the newer iCloud id presents no problem. i've reset the phone a number of times. is there away to get all my previous purchases from my old account transfered to the newer iCloud account?

i now have three Apple Store accounts. The first was when I signed up for mobileMe ending in "me." The second ending in "msn" And now the third ending in,"icloud"
The first two seemed to be linked and i would get notifications to update even when i wasn't signed into that account. All the apps downloaded worked just fine on my Iphone4 whether they were downloaded using my iphone or whether they were downloaded from my macbook pro no matter which account they were downloaded from. Now since i started using icloud and after a number of restores my Apple id under "msn" downloads on the apps and my movies all purchased from itunes won't open up. All the other id's apps open up just fine. I've reinstalled itunes, deleted all the apps under the msn account and tried to redownload on both my iphone and my laptop but, no sucess.
I think the only way to get the apps that i've paid for previously is the see if itunes could move my previous purchases from one account, "msn", to my "icloud" account. has anyone else had a problem like this and how can I makethis happen?

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email addresses from your post (it's not a good idea to post personal info on any public forum).
Is the old account a completely different iTunes account, or is it just a previous primary email address on the same account ? If it's a different account then all content that you download from the store is tied to the account that downloaded it, so only that old account will be able to download updates to its apps.
If it's the same account, just a previous primary email address, then what id shows at the bottom of the Featured tab in the App Store app on your phone ? You could try tapping on that and log out of it and then log back in with the updated version and see what id then shows for updates.

Cannot activate 3.5 transfer structures after BI system copy

We have just completed our first BI system copy (database-specific) from our BI-Production to BI-QA system to refresh database. Have followed the Homogenous System Copy Procedure provided by SAP for Netweaver 7.0, DB2 for LUW. Have been able to reactivate all 7.0 content, but 3.5 transfer structures cannot be activated because the transfer structure tables are not in the ERP QA source system. All 3.5 transfer structures were working prior to the BI system copy. Can anyone provide some guidance. Have issued an OSS Note with SAP, but that can take some time to get resolution. Is there any other resolution than converting 3.5 to 7.0 as this is half of our data?
Thanks for your response!

See SAP Note 493422. Works like a charm.

My albums and there are artwork are all messed up after I downloaded thaw latest IOS, how do I get it all back to normal?

Ever since I downloaded the latest iOS update and installed it to my IPod I have been having issues with my albums in the music app. When look at my album's in the side view i have a million of the same albums and allot wih the same art work as other difrent albums. When i say The cover art is the same i mean example there is a beetles cover art on a rod Stewart album and ALLOT of them are that way. Every thing seems to be fine in my iTunes library i guess, but on my iPod after installing this update. I'm haveing issues

I´m having the same exact problem....

BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

Two issues: activation of transfer rules and data load performance

hi,
I have two problems I face very often and would like to get some more info on that topics:
1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
2. Differences between dev and prod systems in data load time.
On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
Regards,
Andrzej

Aksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat

Transfer Rules Deleted while recreating Source System

Hi:
We connected our QBW system to upgraded SAP ECC 6.0 QAT system. We needed to recreate the source system for ECC since that appeared inactive. After our Basis admin re-created the source system, all transfer rules were deleted. Now we can not extract data. We had done the same thing in BWD when the SAP Dev system was upgraded 3 weeks ago and we did not have this problem. Is it possible to activate all transfer rules in QAT again? Or do we have to restore a backup? Or do we have to collect them again from the Development and transport to QBW??
Thanks

Hi Sunil,
yes when you delet the source system and recreate it evey thing will be vanished
right click on the souce system click Replicate datasouce
Then try with
a) Right click on source system and click on Restore if it doesn't work
b) Transport from Development to Quality
and active all the transfer rules using the report RS_TRANSTRU_ACTIVATE_ALL
hope this information helps you
thanks
kishore

Is there away to activate all Transfer Rules after a client copy at once?

Similar Messages

Maybe you are looking for