Cannot Add Large Text Item

All,
We are trying to add a text item into portal and we get an error when the size of the item is approximately more than 24k.
The error shown is err-30584 dbms_sql raised and unhandled
exception.
When the size of the text item is more than 32k then, we get an
http 404 - page cannot be found error while trying to save the item.
Is there any limit on the maximum size of the text items
in portal? The version we are using is,
Oracle Portal Version: 3.0.9.8.0
Any workarounds are appreciated if this is a known problem.
Thanks in advance,
Sudhakar.

Hi Peter,
FAGLB03 transaction shows the balances ( not the lines ). Only with drill-down you go to the BSEG table and then you can add whatever field you want using a standard SAP functionality of ALV.
Regards,
Eli

Similar Messages

Forms: How to add large text without getting wrapped

hi Waveset/Sun IDM folks,
I need to add a large text to the form via a Field at the bottom of the Form. So using Title and SubTitle form properties is not an option.
When I use Label/Text/TextArea type of Fiels, I see that the text is getting wrapped as if it is a label for a text box or text area or Radio.
I do not have an option of using Title and SubTitle properties of the Form as the text appears at the middle and bottom of the page. What options do I have?
My form has :
SectionHead:
FirstName: <Text>
LastName: <Tex>
Address: <Text Area>
Contract(Section Head)
<Large text needs to go here>

ok, nevermind, Using FieldType-Panel and adding Label fields in it worked out fine for me. Issue closed.

Cannot enable the text item after disable it in Forms 6i

Hi All,
I want to enable/disable the text items depending on the value of the radio group. Since the text items and the radio group are on different tab page, so I place the following code on the WHEN-TAB-PAGE-CHANGED trigger, to do this:
if :recordgroup ='P' then
set_item_property(item1, ENABLED,PROPERTY_TRUE);
set_item_property(item1, NAVIGABLE,PROPERTY_TRUE);
elsif :recordgroup ='K' then
set_item_property(item1, ENABLED,PROPERTY_FALSE);
set_item_property(item1, NAVIGABLE,PROPERTY_FALSE);
end if;
When recordgroup is 'K', item1 is disabled, then when recordgroup has changed to 'P', item1 is still disabled.
Both recordgroup and items are database items.
How come like this?
Thanks is advance,
Vanessa

Hi Vanessa, you must use a "when-radio-changed" trigger, and you need to know what properties of a item are afected when you change any one of this, for your problem ...
if :recordgroup ='P' then
set_item_property(item1, ENABLED,PROPERTY_TRUE);
set_item_property(item1, NAVIGABLE,PROPERTY_TRUE);
-- Add this line:
Set_Item_property(item1, Update_Allowed, Property_True);
elsif :recordgroup ='K' then
set_item_property(item1, ENABLED,PROPERTY_FALSE);
-- If you want, you can delete this line:
set_item_property(item1, NAVIGABLE,PROPERTY_FALSE);
end if;
try it!
Ruben.

Keychain Access: cannot add a new item: user name or passphrase not correct

When trying to add a new item to "Keychain Access", the application suddenly refused to do so. Error message:
Title: An error has occurred. Unable to add an item to the current keychain.
Message: The user name or passphrase you entered is not correct.
I never need a user name neither passphrase to store a new entry in the keychain.
Steps to resolve:
1. Restarting app: no good
2. Repair disk permissions: no improvement
3. Verify disk: no errors found
4. Verfify Keychain First Aid menu from with Keychain.app
Verification started
Checking keychain configuration for User Name (user ID=501)
Home directory is /Users/shortname
Checked login keychain
Checked password for ~/Library/Keychains/login.keychain
Checked settings for ~/Library/Keychains/login.keychain
Settings for ~/Library/Keychains/login.keychain may cause the keychain to be locked
Current values: lockOnSleep=no, autoLock=never
Checked default keychain
Checked keychain search list
Checked contents of ~/Library/Keychains/login.keychain
Checked contents of ~/Library/Keychains/MicrosoftIntermediateCertificates
Verification completed
and a repair:
Repair started
Checking keychain configuration for User Name (user ID=501)
Home directory is /Users/shortname
Checked login keychain
Checked password for ~/Library/Keychains/login.keychain
Checked settings for ~/Library/Keychains/login.keychain
Settings for ~/Library/Keychains/login.keychain may cause the keychain to be locked
Current values: lockOnSleep=no, autoLock=never
Settings corrected on ~/Library/Keychains/login.keychain
Checked default keychain
Checked keychain search list
Checked contents of ~/Library/Keychains/login.keychain
Checked contents of ~/Library/Keychains/MicrosoftIntermediateCertificates
Problems successfully repaired
Repair completed
The First Aid Menu, option repair, solved this problem.
Hopefully by documenting this, this helps another one who experiences the same error, in resolving.

Daniel,
Go ahead and Apply this note , it will fix your issue.
Do you have a third column in AISUSER T.Code .
This issue is fixed in ST : SAPKITL426
Note 1140822 - SAP customer number for installation number &1 unknown
Thanks,
Uday

Keychain: cannot add a new item

i'm getting an error now when i try to add an item to my keychain...
An error has occurred. Unable to add an item to the current keychain.
1000013
any idea of what's going on? i tried running keychain firstaid... tried restarting keychain... nothing.
thanks,
keith

Go to
Settings,
General,
Restrictions, type in your Restriction Password,
Accounts, tick Allow Changes.
Press the back key a few times till you're back in Settings, you should see iCloud is now highlight able, now go to Mail Contacts and Calenders and add your email account as per norm.
Hope this helps.

Cannot select multiple text items simultaneously

Since upgrading to the latest Pages, I can no longer select multiple letters/words by holding down command. I used to use this to edit multiple things (titles, for example) all at once (make bold, underlined, italicized, larger font, coloured, etc.). Now, however, I have to select each letter/word one at a time and edit them individually.
Is this just a bug or is there a new way of selecting multiple text characters simultaneously for editing?
Thanks!

There is no fix by any means.
Switching from Word to Pages v5 (any release) is like giving up oxygen for a vacuum. The time that you will expend searching for feature/functionality omissions in Pages v5 that you had in MS Word will just suck the life out of you.

Using text items in portlets

Hi,
If you upload an image, you can use the virtual path of that image to display it in an HTML portlet.
Does the same apply for text? Is it possible to add a text item in a content area and have it displayed in an HTML portlet?
Thanks in advance,
Joey

Yes, you have to create a folder for each textportlet.
This method also gives you very nice "render within portlet" opportunities. Surf to www.PlanMySport.com, click tab "Informatie" and click the link "Lees hier meer over..." in the upper left portlet. It's in Dutch, but it's just to show the functionality.
The link "Lees hier meer over..." is a subfolder in the folder displaying the announcement "Waarom gebruikt u als sportorganisatie PlanMySport?".
Just try this method - it's very powerful.

How to include text items in a block...urgent please.

I have one form, basically at the first level, it in turns calls other forms too. However, I have add two columns i.e. sales_no, and date_closed at job level. The form is at project level. When the user apply ENTER_QUERY mode on project, then all the projects already closed should display sales_no and date_closed otherwise leave them bank. Project comes from project_master and sales_no, date_closed comes from job and both are linked via project_no, and entity. Could anyone help please?

Hi Jhon,
You have my thanks for your reply and then let me explain the stuff I am doing. The method you have suggested, I am already applying the same techniques. The items are there in the block along with other items. However, when I add my two text items which comes from another table which has relationship with the table being used by the block, though the block is couple of other inter-related tables too. Now when I add my text items I dont apply any triggers, but when I run the form it gives me error, invalid field item. My question is where I can add the triggers for the two items, and how can it be successfully embedded inside the block. I dont know if that makes sense. I'll appreciate your help in this matter. Thanks
Zahir

SQL Developer paste problem for large text in Linux

Hello,
I have a problem. I cannot paste large text (> 5000 lines) into the editor of a clob column. Pasting in general works. I mean I can paste the whole content e.g. to gedit or I can paste partially the text into the sql developer editor but not as a whole.
Colleagues on a Mac can paste the text into the editor. So it should not be about DB settings.
Can anyone tell me which setting I have to change?
SPECS:
Ubuntu 13.10
java version "1.7.0_25"
OpenJDK Runtime Environment (IcedTea 2.3.12) (7u25-2.3.12-4ubuntu3)
OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode)
Info
Oracle SQL Developer 3.2.20.09
Version 3.2.20.09
Build MAIN-09.87
Copyright © 2005, 2012 Oracle. All Rights Reserved. Alle Rechte vorbehalten.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.09.87
Version
Komponente    Version
==========    =======
Java(TM)-Plattform    1.7.0_25
Oracle-IDE    3.2.20.09.87
Versionierungsunterstützung    3.2.20.09.87

I've the same problem and posted it under: 'SQL Dev 2.1 RC1 - "scan defines" doesn't work in opened *.sql files '
I seems, that it doesn't work now, though it worked in SQLDEV 1.5.5
@Chris

Problems with IE and text item

Hi,
I have a problem with IE (v6.0) when I add an text item to a region. IE puts 2 records with the same content into the DB (table wwv_text), Mozilla only 1.
The Problem is, if I change the text of the item with IE, Mozilla, doesn't show the changes made, due to the fact, IE only changes one of the two records and Mozilla reads exactly the other one.
But if I add a text item with Mozilla, only one record is stored in the DB.
Is this a portal or IE bug?
PS: I have disabled version control on the entire page group.

hi dorian,
is it possible that you add an item in a different language if you are using internet explorer. in this case 2 records are created. one for the base language and one for the translation. this also explains that you do not see the edited version of the item in the other browser - in case you are using a different language.
a good technote related to this topic:
http://www.oracle.com/technology/products/ias/portal/html/cm_main_10g_translation_tech_note.html
just an idea...
regards,
christian

Cannot add new items to a value list in AW database

I have a database which I have been using for many years. One of the fields is a value list. I just went to add another item to the list, and no matter what I do, the Create button is grayed out. I have another value list in the same database that works fine.
There are currently 170 items in the value list that is causin the problem, but I didn't think that there was a limit to the number of items that can be is a value list. (At least there is nothing in the AW technical specifications to indicate thin. I duplicated the existing database, deleted about 20 items from the list, then saved the file, and reopened it, and still cannot add new items to that value list. Does anyone know what might be causing the problem?

Oops
I read too fast.
Here is a short script which may help.
Replace the pop-up item by a text one and edit the property myList in my script to fit your needs.
Select the field to fill and run the script.
Then choose an item in the displaid list. It will be pasted in the selected field.
This trick would give you to work with a "no limit" list of items.
-- [SCRIPT DB fillFieldFromAlist ]
Assuming that
the front document is a database one
and that a text field is selected,
run the script to select an item in a list
and paste it in the field.
Yvan KOENIG, Vallauris (FRANCE)
le 19 mars 2007
property MyList : {"item 1", ¬
"item 2", ¬
"item 3", ¬
"item 4", ¬
"item 5", ¬
"item 6", ¬
"item 7", ¬
"item 8", ¬
(* edit the list to fit your needs *)
tell application "AppleWorks 6"
activate
tell document 1
set laClasse to (get class of selection)
if laClasse is not field then return (* the selection is not a field *)
set myItem to choose from list MyList
if myItem is false then return
set the clipboard to myItem's item 1
select menu item 7 of menu 3 (*
Tout sélectionner •• Select All *)
paste
end tell -- document 1
end tell -- AppleWorks
-- [/SCRIPT]
Yvan KOENIG (from FRANCE lundi 19 mars 2007 16:44:53)

Text items larger then 32K

Greetings all
On our project we are using the RTE inside portal to allow our content managers to edit the contents of the page. This works fine in version 9, but in version 10 we have a small problem. While the information is saved correctly inside the database when it's larger then 32K in length and it shows correctly on the page, the item can't be modified anymore, since you get a character string to long error.
After logging a TAR on metalink, they know the bug is related to this one: Bug 2346039 - TASK: TEXT ITEMS CANNOT EXCEED 32K IN SIZE. The biggest problem at this time for our content managers that they have no clue at all they are entering an item that is too large to edit, since everything is saved correctly in the tables.
We've added some JavaScript code to the buildUIembed.html file so that the users get a popup window that tells them the item is to large, but untill now, we're unable to stop oracle for saving the item in the database.
Does anyone know a way to stop the default action of oracle so that people can copy/paste their work to a safespot to split it up in 2 to avoid this bug?
Best regards
Johan Van Volsem

Hell christian
Thank you for your response, but when you use a the rich text editor, you don't use text items (oracle does internaly). Because the item of over 32K is nicely stored in the table without any errors. If we don't use the RTE, then when you save the item, the browsers return an error, the RTE doesn't which makes it more confusing for content managers, since they don't even know something is wrong when they save the item.
Hence why oracle has added my bug from the tar to this ER.
Thanx for your input anyhow.
Regards
Johan

How to add a new text item in PO items' Item Texts

Dear All,
In IDES a standard PO, there are 5 items texts under Items of PO:
Item text, info record PO text, Material PO text, Delivery Text ,info record note.
Here we got a requiremnt, it need adds a new item as abvoce.
How can it be done?
Any configuration guide?
Thank you in adv.
Regards,
James

Check at this node
SPRO: MM > Purchasing > Purchase order > Texts for Purchase orders > Define Text types for Item Texts
this is for ECC 6.0 , In IDES it may differ

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

How to add new "text" field in GL item fast entry?

Hi Gurus,
Is that possible to add "text" column or field in GL item fast entry. For example, if i go to Txn F-04, i enter all the details then i go to: "Goto>GL item fast entry (shift+F8). Now you will see layout (GL item fast entry). So back to my question before, is that possible to add new field or column (text field) in this layout? If the answer is Yes, appreciate Gurus help and guide me in configuration, if any.
Thank you
Regards,
Nazrul

Hi Sreehari Annavaram,
Thank you for your kind reply. Based on the answer from the link you have given me (as per below quote), there's no "DEM03" in my selection screen. We only have SAP01, SAP02 and GL001 (customised layout). That's why i had created new customised layout GL002 and try to add the "text" field in layout as per my first question. But system still won't allow it.
*"In F-02 under editing option screen screen templates and line layout variant for document entry will be there in that
GL accounts items for fast entry select DEM03 u will get the text item"*
Appreciate help.
Thank you
Regards,
Nazrul

Cannot Add Large Text Item

Similar Messages

Maybe you are looking for