Problems with IE and text item
Hi,
I have a problem with IE (v6.0) when I add an text item to a region. IE puts 2 records with the same content into the DB (table wwv_text), Mozilla only 1.
The Problem is, if I change the text of the item with IE, Mozilla, doesn't show the changes made, due to the fact, IE only changes one of the two records and Mozilla reads exactly the other one.
But if I add a text item with Mozilla, only one record is stored in the DB.
Is this a portal or IE bug?
PS: I have disabled version control on the entire page group.
hi dorian,
is it possible that you add an item in a different language if you are using internet explorer. in this case 2 records are created. one for the base language and one for the translation. this also explains that you do not see the edited version of the item in the other browser - in case you are using a different language.
a good technote related to this topic:
http://www.oracle.com/technology/products/ias/portal/html/cm_main_10g_translation_tech_note.html
just an idea...
regards,
christian
Similar Messages
-
IPhone 3GS multiple problems with calls and text
I have AT&T for service provider and I am having these problems with the THIRD Iphone 3Gs that I have received since Jan 12.
I turned off 3GS again after newest update, not sure if it willl help or not.
Also, I have the same problems with this phone as previous 2 Iphones I got at Apple Stores:
* sporadically drops calls - even if I don't move from the spot I originally called from. This is my only phone, so I need to make and receive any calls to this phone.
*"Searching", "No Service", so text messages don't get sent, but I don't know that unless I check back to see the red ! and I keep trying to resend...
* No SIM card - but, only know this if I check, not good when busy and waiting for a call or text.
Do I need to go to an Apple store again (not nearby me) to replace it before my replacement warranty runs out?
Thanks for any help!Try powering the phone off, then removing and replacing the battery, and powering the phone back on.
Then try dialing *228 send and option 2 on the phone to update the PRL.
Then try closing down applications that you are not using on the device.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Applications.
Touch Running services.
Touch a service you are not using then.
Touch Stop.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.Touch Applications.Touch Running services.
Touch a service you are not using then.
Touch Stop.
Repeat steps as needed. -
Problem with images and text displaying correctly
I don't really know how to explain this problem and I had two screenshots ready to upload to show the before and after but we apparently can't upload photos now...SOOOO I will try my best.
The issue began when I got a new computer at work (Windows 7 instead the Windows XP everyone else has) and was/is present for me in InDesign CS2 and since we were planning on updating to CS5, I figured that having an updated version would fix whatever issue it was. That was a wrong assumption unfortunately.
When I open any document, all images and text are displayed properly until I scroll up/down or side-to-side and NOT using the scroll wheel for up/down. This is probably so confusing and I'm sorry I can't describe it better...the mouse I use has two programmable buttons that I set to coast up and down and to go side-to-side I can push the scroll wheel to one side or the other and it coasts that direction. When I do either of those things, the text looks like it is permanently greeked and the images look....weird lol like they are in 16 bit or something like that. To fix the problem in CS2, I have to click and hold on a text block until I am able to adjust text so that I can see it adjust in real-time. In CS5, I have to do the same basic thing except I don't have to click and hold as it does that by default (awesome feature btw!!)
I have already updated my graphics card driver (Nvidia 9400 GT 1GB) and my processor driver (Intel Core2Duo 3.0ghz) and I have 4GB of RAM. I tried updating both CS2 and CS5 but both are updated already. I've also tried doing the whole inx. export and cleaning the preferences file or whatever that is called. Nada. If someone thinks they can help me, I can send them the two images I was going to upload here. Email me at justgeig (at) gmail (dot) com Thanks in advance!maybe greeked isn't the right word...i don't know how to explain it
here is the correct view. It is much more noticable when the whole document shows this. -
Problem with Siri and texting.
I have Siri....she would read the callers reply and ask........." you can...reply, read it again or...." Now she just reads and goes silent. Help?
does anyone have the answer to above question?
thanks fred zjbauer wrote:
Hi All,
So I am trying to access my iPhone 5 with it tucked away in my pocket and using a bluetooth headset to communicate to Siri and do stuff on my phone. My issue is that once the phone locks (unfortunately, that's MANDATED by my company policy) - then Siri is handicapped. Can't read email any more, for example.
I don't have easy access to the phone, as when I'm doing this, I'm on a motorcycle and the phone is inaccessible...
This is a big problem for me!
I know that I can delete my company email entry and that would eliminate the lock requirement, and I know that I can jailbreak and eliminate the lock requirement (but I'm on iOS 8).
Is there any other thing that I'm not thinking of? I'd really like to be able to use Siri even after the phone is locked and requires a key code...
- Thanx in advance!
- Jon -
Problems with signatures and text tools
When I open forms none of the 'fill and sign' 'comment' tools are available (all grayed out). Others in my office use these forms so it is particular to my software / machine. Any thoughts why these features are turned off / broken. I have completely removed adobe and re installed but it seemed to make little differences. This used to work before my Adobe Pro license expired. Suggestions?
I wonder where you removed Adobe from, stock exchange? Adobe is a company. It produces many products. Which product do you use: Acrobat/Reader? Which version (including minor)? Which platform/OS? When you say "This used to work before my Adobe Pro license expired" do you mean that you installed a trial version and it expired and now you purchased a license (product key)?
When you say "When I open forms none of the 'fill and sign' 'comment' tools are available (all grayed out)" are you opening the same PDFs that you successfully tries before or new PDFs?
If those are new PDFs one reason for this behavior could be that your forms have (visible or invisible) digital signatures. For instance, they have an invisible digital signature if they are Reader-enabled. -
Problem with writing and reading using serialization
I am having a problem with writing and reading an object that has another object in it. The purpose of the class is to write a order that has multiple items in it. And there will be several orders. This is for an IB project, where one of the requirements is to utilize a hierarchical composite data structure. That is, it is "one that contains more than one element and at least one of the elements is a composite data structure. Examples are, an array or linked list of records, a record that has one field that is another record, or an array". The code is shown below:
The error produced is
java.lang.NullPointerException
at SamsonRubberIndustries.CustomerOrderDetails.createCustOrdDetailsScreen(CustomerOrderDetails.java:150)
at SamsonRubberIndustries.CustomerOrderDetails$1.run(CustomerOrderDetails.java:78)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
public class CustOrdObject implements Serializable {
public int CustID;
public int CustOrderID;
public Object OrderDate;
public InnerCustOrdObject[] innerCustOrdObj;
public float GrandTotal;
public int MaxItems;
public CustOrdObject() {}
public CustOrdObject(InnerCustOrdObject[] innerCustOrdObj,
int CustID, int CustOrderID, Object OrderDate,
float GrandTotal, int innerarrlength, int innerarrpos, int MaxItems) {
this.CustID = CustID;
this.CustOrderID = CustOrderID;
this.OrderDate = OrderDate;
this.GrandTotal = GrandTotal;
this.MaxItems = MaxItems;
this.innerCustOrdObj = new InnerCustOrdObject[MaxItems];
public InnerCustOrdObject[] getInnerCustOrdObj() {
return innerCustOrdObj;
public void setInnerCustOrdObj(InnerCustOrdObject[] innerCustOrdObj) {
this.innerCustOrdObj = innerCustOrdObj;
public int getCustID() {
return CustID;
public void setCustID(int custID) {
CustID = custID;
public int getCustOrderID() {
return CustOrderID;
public void setCustOrderID(int custOrderID) {
CustOrderID = custOrderID;
public Object getOrderDate() {
return OrderDate;
public void setOrderDate(Object orderDate) {
OrderDate = orderDate;
public void setGrandTotal(float grandTotal) {
GrandTotal = grandTotal;
public float getGrandTotal() {
return GrandTotal;
public int getMaxItems() {
return MaxItems;
public void setMaxItems(int maxItems) {
MaxItems = maxItems;
public class InnerCustOrdObject implements Serializable{
public int ItemNumber;
public float UnitPrice;
public int QuantityRequired;
public float TotalPrice;
public InnerCustOrdObject() {}
public InnerCustOrdObject(int ItemNumber, float
UnitPrice, int QuantityRequired, float TotalPrice){
this.ItemNumber = ItemNumber;
this.UnitPrice = UnitPrice;
this.QuantityRequired = QuantityRequired;
this.TotalPrice = TotalPrice;
public int getItemNumber() {
return ItemNumber;
public void setItemNumber(int itemNumber) {
ItemNumber = itemNumber;
public int getQuantityRequired() {
return QuantityRequired;
public void setQuantityRequired(int quantityRequired) {
QuantityRequired = quantityRequired;
public float getTotalPrice() {
return TotalPrice;
public void setTotalPrice(float totalPrice) {
TotalPrice = totalPrice;
public float getUnitPrice() {
return UnitPrice;
public void setUnitPrice(float unitPrice) {
UnitPrice = unitPrice;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.table.DefaultTableModel;
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems;
private static boolean FileExists, recFileExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.dat");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord-1);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
//TotPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++CurrentRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
setInnerFieldText(currentItem);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
//readOrder();
setInnerFieldText(currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
writeRecordNumber(MaxRecord);
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
currentItem++;
setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
System.err.println("currentItem" + currentItem);
getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07
Message was edited by:
Kilik07ok i got reading to work to a certain extent... but the prob is i cnt seem to save my innerCustOrdObj proprly...when ever i look for a record using the gotorecordbtn, the outerobject, which is the orderDetails, seems to change but the innerCustOrdObj remains the same... heres the new code..
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems = 1;
private static boolean FileExists, recFileExists;
private static boolean RecordExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.ser");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
//CurrentRecord--;
//System.out.println("Current Rec Here"+CurrentRecord);
if(orderDetails[CurrentRecord] == null){
System.err.println("CustomerOrderObj 1 is null !!");
}else{
System.err.println("CustomerOrderObj 1 is not null !!");
if(orderDetails[CurrentRecord].getInnerCustOrdObj() == null){
System.err.println("InnerCustomerOrderObj is null !!");
}else{
System.err.println("InnerCustomerOrderObj is not null !!");
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord);
getInnerFieldText(MaxItems);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
//CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
TotPriceTxt.setEditable(false);
TotPriceTxt.addFocusListener(new FocusAdapter(){
public void focusGained(FocusEvent evt){
TotPriceTxt.setText(""+Integer.parseInt(UnitPriceTxt.getText())*Integer.parseInt(QuantityReqTxt.getText()));
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println("Current Record " + CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
CurrentRecord = MaxRecord;
orderDetails[CurrentRecord] = new CustOrdObject();
writeRecordNumber(MaxRecord);
MaxItems = 1;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
setInnerFieldText(MaxItems);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
MaxItems++;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
System.out.println("Max Items "+MaxItems);
currentItem = MaxItems;
orderDetails[CurrentRecord].setMaxItems(MaxItems);
///setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
gotorecordbtn = new JButton("Go To Record", createGotoButtonIcon());
gotorecordbtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt){
* The text from the GotorecordTxt textfield will be taken and assigned
* to a temporary integer variable called Find.
int Find = Integer.parseInt(CustOrderIDTxt.getText());
for(int j=1; j <= MaxRecord; j++){
* Using a for loop, each record can be read using the readCustRecord
* method.
getFieldText(j);
* An if condition is utilized to check whether the temporary stored variable, Find,
* matches a field in a record. If this record is found, then using the RecordExists
* which was declared at the top, either a true or false statement can be assigned
* If the record exists, then a true statement will be assigned, if not a false
* statement will be assigned.
if(orderDetails[j].getCustOrderID() == Find){
RecordExists = true;
break;
}else{
RecordExists = false;
if(RecordExists == false){
* If the RecordExists is assigned a false statement, then a message will be
* displayed to show that the record does not exist.
JOptionPane.showMessageDialog(null, "Record Does Not Exist!", "Error Message", JOptionPane.ERROR_MESSAGE, createErrorIcon());
}else{
getFieldText(Find);
buttonpanel.add(gotorecordbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setMaxItems(MaxItems);
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
orderDetails[orderID].getInnerCustOrdObj();
System.err.println("currentItem" + currentItem);
//getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
/* System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());*/
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07 -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problem with dreamweaver and Flash
Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie. -
Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
RegardsAnuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction OUTBOUND
State MSG_ERROR
Error Code B2B-51507
Error Text Error Brief : The element does not include any significant data.
Error Description Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date 06/20/2011 02:52 PM
Modified Date 06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM -
Problem with JTextPane and StateInvariantError
Hi. I am having a problem with JTextPanes and changing only certain text to bold. I am writing a chat program and would like to allow users to make certain text in their entries bold. The best way I can think of to do this is to add <b> and </b> tags to the beginning and end of any text that is to be bold. When the other client receives the message, the program will take out all of the <b> and </b> tags and display any text between them as bold (or italic with <i> and </i>). I've searched the forums a lot and figured out several ways to make the text bold, and several ways to determine which text is bold before sending the text, but none that work together. Currently, I add the bold tags with this code: (note: messageDoc is a StyledDocument and messageText is a JTextPane)
public String getMessageText() {
String text = null;
boolean bold = false, italic = false;
for (int i = 0; i < messageDoc.getLength(); i++) {
messageText.setCaretPosition(i);
if (StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && !bold) {
bold = true;
if (text != null) {
text = text + "<b>";
else {
text = "<b>";
else if (StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && bold) {
// Do nothing
else if (!StyleConstants.isBold(messageDoc.getCharacterElement(i).getAttributes()) && bold) {
bold = false;
if (text != null) {
text = text + "</b>";
else {
text = "</b>";
try {
if (text != null) {
text = text + messageDoc.getText(i,1);
else {
text = messageDoc.getText(i, 1);
catch (BadLocationException e) {
System.out.println("An error occurred while getting the text from the message document");
e.printStackTrace();
return text;
} // end getMessageText()When the message is sent to the other client, the program searches through the received message and changes the text between the bold tags to bold. This seems as if it should work, but as soon as I click on the bold button, I get a StateInvariantError. The code for my button is:
public void actionPerformed(ActionEvent evt) {
if (evt.getSource() == bold) {
MutableAttributeSet bold = new SimpleAttributeSet();
StyleConstants.setBold(bold, true);
messageText.getStyledDocument().setCharacterAttributes(messageText.getSelectionStart(), messageText.getSelectionStart() - messageText.getSelectionEnd() - 1, bold, false);
} //end actionPerformed()Can anyone help me to figure out why this error is being thrown? I have searched for a while to figure out this way of doing what I'm trying to do and I've found out that a StateInvariantError has been reported as a bug in several different circumstances but not in relation to this. Or, if there is a better way to add and check the style of the text that would be great as well. Any help is much appreciated, thanks in advance.Swing related questions should be posted in the Swing forum.
Can't tell from you code what the problem is because I don't know the context of how each method is invoked. But it would seem like you are trying to query the data in the Document while the Document is being updated. Try wrapping the getMessageText() method is a SwingUtilities.invokeLater().
There is no need to write custom code for a Bold Action you can just use:
JButton bold = new JButton( new StyledEditorKit.BoldAction() );Also your code to build the text String is not very efficient. You should not be using string concatenation to append text to the string. You should be using a StringBuffer or StringBuilder. -
Problem with storing and retriving a different langauge font in mysql
hi,
i have problem with storing and retriving a different character set in
mysql database ( for example storing kannada font text in database)
it simply store what ever typed in JTextField in database in the
formate ??????????? and it showing ???????? .
please what can i do this problem.
thanks
dayaMySQL does not know about what type of Font you use or store. that is applicatioon specific. All it knows is the character set that you are storing and the data type and data. THere are something you should know when working with database and Java:
1. make sure you know what character set is used for the database table.
2. make sure you know what character set is used by Java (default to UTF-8 ..
sort off - there are few character that it cannot save). You can enforce the
character set being sent to the database by the String's getBytes(String charsetName) method.
3. make sure the application you use to view the table use the correct character set
if it use a different character set, then any character that it does not recogized
will be replaced with a quetion mark '?'....eventhough the data is correct. -
Problem with attachments and antivirus.scanners
Hi!
Problem is: Sending any attachment from Tiger (10.4.8) mail, all attachments are removed by a virus scanner at receiving end:
This message was modified by F-Secure Anti-Virus E-Mail Scanning.
Tried Windows friendly, text only, repair permissions, sending under other isp etc. no help.
If this same message with same attachment is send from next mac with Panther, it is received ok.
Receiving company is big and wont alter their virus-scanners and the problem clearly lies in Tiger.
Any help welcome.
Mac OS X (10.4.8)The subject of your message should have been "Problems with attachments and F-Secure antivirus" since this is not a problem with all antivirus software, only with F-Secure.
Check this thread for a possible temporary solution when sending attachments to those who use F-Secure.
http://discussions.apple.com/thread.jspa?messageID=2837384� -
Problem with IE and pubblishedIntoWall
Hi to all,
i have a problem with InternetExplorer and CallBack
In my flex code i have :
flash.external.ExternalInterface.addCallback("pubblishedIntoWall", pubblishedIntoWall);
The javascript code:
function pubblishedIntoWallCarrello() {
document.getElementById("composer").pubblishedIntoWall(1)
In both Firefox and Chrome the javascript works in the right way.
In internet explorer the function pubblishedIntoWall is not called.
Have some one got an idea of this problem?
Thanks for your timeFirst of all, thank for your reply
This is the code that i use in the HTML, i use allowScriptAccess = sameDomain
----------- CODE -------------------
<div id="divContainercomposer" style="position:absolute;left:50%;top:0px;width:930;height:100%;margin-left:-465px">
<script language="JavaScript" type="text/javascript">
<!--
// Version check for the Flash Player that has the ability to start Player Product Install (6.0r65)
var hasProductInstall = DetectFlashVer(6, 0, 65);
// Version check based upon the values defined in globals
var hasRequestedVersion = DetectFlashVer(requiredMajorVersion, requiredMinorVersion, requiredRevision);
if ( hasProductInstall && !hasRequestedVersion ) {
// DO NOT MODIFY THE FOLLOWING FOUR LINES
// Location visited after installation is complete if installation is required
var MMPlayerType = (isIE == true) ? "ActiveX" : "PlugIn";
var MMredirectURL = window.location;
document.title = document.title.slice(0, 47) + " - Flash Player Installation";
var MMdoctitle = document.title;
AC_FL_RunContent(
"src", "playerProductInstall",
"FlashVars", "MMredirectURL="+MMredirectURL+'&MMplayerType='+MMPlayerType+'&MMdoctitle='+MMdoctitle+"" ,
"width", "930",
"height", "100%",
"align", "middle",
"id", "composer",
"quality", "high",
"bgcolor", "#ffffff",
"name", "flashContent",
"allowScriptAccess","sameDomain",
"type", "application/x-shockwave-flash",
"pluginspage", "http://www.adobe.com/go/getflashplayer"
} else if (hasRequestedVersion) {
// if we've detected an acceptable version
// embed the Flash Content SWF when all tests are passed
AC_FL_RunContent(
"src", "composer",
"width", "930",
"height", "100%",
"align", "middle",
"id", "composer",
"quality", "high",
"bgcolor", "#ffffff",
"name", "composer",
"allowScriptAccess","sameDomain",
"type", "application/x-shockwave-flash",
"pluginspage", "http://www.adobe.com/go/getflashplayer"
} else { // flash is too old or we can't detect the plugin
var alternateContent = 'Alternate HTML content should be placed here. '
+ 'This content requires the Adobe Flash Player. '
+ '<a href=http://www.adobe.com/go/getflash/>Get Flash</a>';
document.write(alternateContent); // insert non-flash content
// -->
</script>
<noscript>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
id="flashContent" width="930" height="100%"
codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
<param name="movie" value="composer.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="allowScriptAccess" value="sameDomain" />
<embed src="composer.swf" quality="high" bgcolor="#ffffff" id="composer"
width="930" height="100%" name="composer" align="middle"
play="true"
loop="false"
quality="high"
allowScriptAccess="sameDomain"
type="application/x-shockwave-flash"
pluginspage="http://www.adobe.com/go/getflashplayer">
</embed>
</object>
</noscript>
</div> -
Problem with TextInput and RadioButton
Hi,
I've encountered a problem with TextInput and RadioButtons.
I've created some text fields and radio buttons for a
feedback form under a movie _root.feedback.
But for some reason, I can't seem to enter text into the text
field (no blinking cursor), and I can't see the "label" next to my
radio buttons.
Just as a workaround, I tried moving these fields to _root,
and now I can enter text and see the radio button labels.
But to keep my hierarchy clean, I want to use a the
_root.feedback movie for my feedback fields. Any ideas what could
be going wrong? I checked Window -> Component Inspector, and
these textInput fields are enabled.
Stuck.
Thanks.Is the text the same color as the background or do you need
embedded fonts? -
Problem with Class and Classpath
Hello ME Windows Users, now before you place a wry smile on your face, I have a problem with path and classpath. Stop it, I can see you smiling!
By visiting the the last 10 pages of the forum and reading Sun installation notes, some tooldocs and by given some answers by some nice people, I have become an expert in turning off my computer, about 10 times/hr. I still am trying to make my first cup of java.
With the ME computer,
I'm unable to right click on the desktop and go to properties, advanced,
I'm unable to go go start, run, sysedit,
I'm unable to change the ms-dos window of autoexec.bat, it just shuts down.
Now before you tell me, I should of bought a different computer, the only place I can find to modify the path and classpath is in the environment which is in system configuration under tools. Here I have placed numerous configurations, like
C:\java>set path=%path%;c:\j2sdk1.4.2\bin
C:\java>set classpath=%classpath%;.;
;java_dir\bin where ;java_bin is c:\j2sdk1.4.2
.; java_dir\bin; %path% where ;java_bin is c:\j2sdk1.4.2 and the list goes on.
But, I know you are still smiling, the % signs comes up in a dialog box, saying too many, and will not convert the text to the environment to be saved when I close down for the tenth time in the last hour.
Can someone help me before I make a real cup of coffee and accidentally drop it on the ME box.
Have a laugh on me Mik.C:\java>set path=%path%;c:\j2sdk1.4.2\binGood
But it is no good because it has to many % and a dialog box appears, saying you have too many parameters.
Are you saying I have to shutdown again to answer your ?
From the HELP menu-
To confirm startup commands line by line
Click Start, and then click Shut down.
Click Restart, click OK, and then press and hold the CTRL key until the Windows Startup Menu appears.
Enter the number for Step-by-step confirmation, and then press ENTER.
For each command you want to run, press Y.
If the command runs successfully, you are prompted with the next command.
If the command does not run successfully, you receive an error message.
To skip a command, press N.
Mik
Maybe you are looking for
-
Convert Exported Document to Compatabilite View for Editing
Convert PDF Document to word for Compatability View so Document can be Editied and Changed
-
Is there a spam filter for email?
Getting dozens of spam emails on iPad and iPhone each day. Is there a filter available?
-
I updated bith Photoshop CC and Lightroom 5 yesterday and now they both do not work. Photoshop has been asking for activation for the last month and I have no connectivity issues on my laptop. Also Lightroom is requesting a serial number which when
-
Kdebase 3.2 beta 2 build problems
For some odd reason I just can't seem to get the new beta to compile correctly on my system. It keeps trying to load nvidia libraries from /opt/nvidia/lib which does not exist. I had to recreate the file libGL.la in my /usr/lib dir from a post on t
-
Icloud control panel doesn't open in windows 7
I thought I had my iCloud set up on an iPhone, Windows pc, and laptop. Yesterday my pc calendar came through on the lap top for the first time. This morning, iCloud appears in my programs list but there is no "Conrol Panel" and I can't open a contr