Cannot change Speedgrade CC timeline view!

I want to zoom in on the timeline to see my clips better.  I can't find a tool for it.  Adobe help says, "Select the Master Timeline view from the view menu on the upper-left side of the Timeline." and then use a wheel/ctrl combination to zoom.  All well and good, except that the button I need to click (which is labeled "All") is either an on or off toggle.  The accompanying illustration on the help page shows it as a dropdown selector.
Set the Timeline view with the menu on the upper-left side of the Timeline.
I don't have the dropdown on my version of Speedgrade CC.  I can either select "All" (which highlights it blue) or deselect it (which turns it grey).
Anyone have a solution?

So, my only options are to see the entire timeline (useless in my current project with hundreds of clips), see six seconds at a time (since I am trying to color match all clips in a scene that lasts longer than six seconds, this is also useless) or to see my in-to-out (which would require near-constant re-marking in and out points)?
I appreciate the feedback, but between incorrect documentation, non-intuitive user interface (want to clear a play head?  The only way to do so is to drag it off the timeline into the video monitor area, which doesn't work if you're using dual screen mode) and inflexibility, I've had enough of this program.
I'm going to use Resolve for this (and all subsequent) projects.
I love some Adobe products (Photoshop, After Effects), think some are almost great (Premiere), but this one is a bust.

Similar Messages

  • TS4002 I want to view my emails with the reading pane at the bottom of the screen - I cannot change it from a vertical column view. Used to be 'classic view' in mobile me. Anyone know how to do it?

    I want to read my emails in horizontal view - reading pane at the bottom of the monitor - on iCloud. I cannot change the view from vertical and columns? Anyone know how I can do this? It was called 'classic view' in Mobileme.

    Thanks, got that.
    That's OK on 'mail'.
    My problem is on webmail -  when I open my email on    iCloud I have the columns and cannot find where to change the view.
    Any further ideas?

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • How do change the timeline view in PE9 to see all frames?

    In PE9 I notice that many frames in timeline view appear blank. at the clip transitions the frame have images.   How do I change this to see all the frames?  In PE 2 I never had the "feature".  I assume that most are blank to reduce file handling,etc.   But I'd like to toggle the frame images on/off on command.
    p.s.  when I imported a short 8 munutes series of clips direct from my HD sony camera the timeline frames were complete... but most video i'm using is old anlaog tape conversions to DVD...than dvd files imported for PE editing.
    thanks
    david

    I was only half-correct. In PrPro, there is a drop-down menu, while in PrE, it's a toggle through the three possible display states:
    Sorry for that, and good luck,
    Hunt

  • Hi i cannot change the brightness on my late 2011 macbook pro.

    Hi i cannot change the brightness on my late 2011 macbook pro. It is stuck on the lowest level in which i can't view the screen without a flash light. Please i need help how to solve this. I was on my computer when i checked the back which it was really dusty, i tried unscrewing the bottom however some screws were too tight so i took it upon myself and got a rod and startedremoving the dust off the vents and i may have clicked something as i closed the lid on the macbook i could hear the sounds still from the film but the lid was closed as i opened it back up the brightness was on low but sounds were still playing. All the buttons work , all of the F keys, apart from the brightnes keys. I can shine a tourch on the screen and see the display but the brightness will not change but i can see when i click the brightness it says it changes. I have connected it to a spare tv i have via hdmi and i really need help as this is my primary computer and i need it for work when going away. Thank you

    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • Cannot change my printer preferences

    Dear Hp technicians:
           Hi I'm from Mexico and I just loged in to my hp e-print center and it took me here. My problem is I find it really difficult to log in from my country coz' hp connected doesn't work, it simply just don't let my Log in.      I found that visiting hp connected-uk is the only way to log  in. But then,  I'm loged in, but I cannot change my printer preference coz' the button  doesn't exist, the one that used to say "Change setting"  is now just simple text.  How can I go back to e-print center instead of HP connected..... Please this is driving me crazy!
    I need your help

    Hi there, if you've updated your ePrintCenter account to HP Connected you can't revert back. Check out this thread for more information on the change from ePC to HP Connected http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-Connected-Support...
    Can you reply with a screenshot showing exactly what it is you're trying to change? Is it a setting of a printer in the Device tab or is it something in the "Settings" dropdown menu at the top right of the screen below?
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Changing the default associated view for a related entity

    A question from a peer:
    Hey there
    Do you know how in CRM 2015 to change the default associated view for a related entity?
    Say you are in an Account and from the menu open the opportunities for that account.
    That new pop up window states “Opportunity Associated View” I want to change that to “My Custom View”
    I thought we covered this in class years back but cannot remember

    There are a few ways to get what you want, the easiest being
    Create a document as you want it for a particular site, save it is junk.php or similar and create a new file by saving as this as the proper document name such as index.php
    Use the Dreamweaver template system, i.e. create a template with a .dwt.php extension like template.dwt.php and use that to create new pages.
    There are other ways like creating your own php template system. But you can put that in the too hard basket.

  • "Cannot use adobe reader to view pdf in your web browser" error in Windows 7 and Acrobat pro 8.1.7

    I get the error "Cannot use adobe reader to view pdf in your web browser.  Reader will now exit.  Please exit your browser and try again" in Windows 7 x32 and Windows 7 x64 with Acrobat pro 8.1.7.  This happens when trying to open  a PDF file in Internet explorer 8.0.760 or when I open a PDF in Quickbooks 2008.  If I answer ok or cancel the file opens normally.  If I open acrobat 8 first then the pdf files open as expected.  I also tried a copy of Acrobat reader with no difference in the outcome.  Since this happens on two different computers one fresh copy of windows 7 x64 the other an upgrade to windows 7 x32 and they used to work before the change to windows 7, I assume there is some kind of incompatibility with windows 7 and acrobat.  Is this a known issue and will it be fixed in an update to acrobat in the near future?

    tvandersluijs - I'm sorry if that screwed up your machine however:
    1. What version of Adobe Reader are you using because as you can see the registry entry is for Adobe Reader 9, if ur using Adobe Reader 8 then u need to specify ur version as PAllens entry suggested - "E.g. "C:\Program files\Adobe\Acrobat [version]\Reader\AcroRd32.exe""
    2. I've used this solution significantly because I have come across this specific issue for multiple users.
    3. All the registry entry does is tell Windows what program to use by default to open/view PDF documents.
    My intention wasn't to screw up ur machine or anybody elses as I said I've used this solution many times however what I've should gave is the disclaimer to backup ur registry before u make mods so u can revert back in case. Also the ony other thing I can think of is that this solution was for Windows XP using registry editior 5, I'm noticing that the title of this thread is Windows 7.

  • In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item.

    In iPhoto '11 I cannot change the book settings. For example, adding page numbers. There is no "option" button as is suggested by the help item. How can I change to book settings?

    The "options" button should appear at the bottom of the iPhoto window, when you view your book, then the Book Settings Button should be available and you can activate page numbers.
    But remember, that the settings available will depend on the Book Theme you selected. The above shows the settings for one of the "Travel" themes. In a Picture Book Theme, e.g. you cannot add page numbers.
    What theme and book size are you using?
    Regards
    Léonie

  • Open in Timeline-how to return to timeline view?

    If you select a clip in the timeline and want to see it in close detail, you can right-click to open a menu of options that include "Open in Timeline." Once there, you are seeing a complete view of the whole clip with the trimmed section clear and the ends grayed down.
    But this has me stumped. How do you jump right back to the full Timeline edit view? That menu has no ability to return you from whence you came. I have to click on the Project Library, select the current edit again and only then does it open the regular Timeline view.
    I can't find anything in the scant Help document and "Open in Timeline" doesn't find anything here.
    Any clue as to how to dismiss it?
    Escape doesn't work. Undo doesn't work. Well, it does, but it undo's any changes I make, first. None of the other ideas in that drop-down menu seem to help.
    Is this a left turn into a one-way cul-de-sac?

    Thanks a bunch.
    Is that hiding in the docs somewhere?
    I found an alternative. Command+0 (zero), twice makes a round trip to the timeline index.

  • App.Xaml cannot be edited in design view(Visual Studio 2012 for Window Store).

     App.Xaml cannot be edited in design view(Visual Studio 2012 for Window Store).

    The
    Simple Application Walkthrough specifically instructs one to edit App.xaml (because it previously had you inject a defect by changing the name of the file StartupUri property points to). So that is the scenario, or one of them. I assume it is 'valid'
    to rename MainWindow.xaml to whatever you want it to be.
    So there should be some way in the IDE to fix this (short of changing the file name back to match StartupUri). What is it? 
    Like another person here, I just edited it with a text editor and reloaded it into VS. But...

  • How to modify the timescale on the Timeline view in MSP 2010

    I created Timeline's for some projects using MSP 2010.  Some Tinelines display quarters and others display months.  I can't find an option to change the Timeline timescale.  I tried switching the timescale onthe Gantt view but it
    had no effect on the Timeline view. 
    Is there a direct or indirect way to change the timescale units on the Tineline view time scale?

    Click in  the Timeline view and the ribbon bar for Timeline will be activated.  On the left side you should see Date Format.  Use this to select the date format you would like to view.
    As i adjust the timescale using the zoom in the lower right corner it seems to be adjusting the date density.  Keep in mind that this view will also adjust to the density necessary to show the entire project in the view.  When you click on the
    View tab (ribbon) you can use the option for the entire project.  Note that the Timescale options are not available.
    I suggest for the best use of this view to use it at a high level.  What I recommend is to show summary and milestone taaks only. 
    Ellen Lehnert
    www.lehnertcs.com
    Ellen Lehnert, MVP, PMP, MCT Training/Consulting/Author [email protected], www.lehnertcs.com Author "Managing Projects using MS Project 2010 desktop" courseware, www.MVP-Press.com

  • When using Firefox I cannot obtain Gmail in Standard View, only in HTML.

    When using Firefox I cannot obtain Gmail in Standard View, only in HTML. It's OK in Chrome.
    How do I correct this? Firefox is my default browser.

    That is usually an indication that some JavaScript aren't working properly on the Gmail site.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Dragging clips to timeline viewer

    Does anyone know why I get a message such as "this may take a while" when i attempt to drag a clip from the clips pane to the timeline viewer?" It does take a looooong time. I don't remember this happening in earlier iMovie versions.
    Sometimes it also starts to "letterbox" when i do the same thing. And you can't stop these actions.
    Thanks.

    Hi Carol:
    You can change the Letterboxing in the preference of iMovie:
    Import/ automatic conversion from pillarbox to letterbox - you need to un-check it.
    To keep from waiting for it to Letterbox, change the settings to DV Widescreen when you open a new project -If you do record in 16:9 aspect ratio.
    Sue

  • Cannot change background color

    I cannot change chart background color,can someone help me .

    Hi,
    You could change the style of chart plotarea by using below code:
    <UserControl.Resources>
    <Style x:Key="GridStyle1" TargetType="Grid">
    <Setter Property="Background" Value="White"/>
    </Style>
    </UserControl.Resources>
    Besides, link below could give you some help:
    http://msdn.microsoft.com/en-us/expression/dd433476.aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for