Cannot communicate from weblogic 10.3.5 to weblogic 8.1.4 (OIM 11gR1)

Hi all,
when i run java class adapter in oim 11gR1, which contain ejb class from other weblogic(8.1.4), i facing problem that request which i run cannot finish or process is looping forever.
my code :
public String create(){
SecurityMngr = (SecurityManager) connMthdDsms.connectionForDsms().get("a");
success = SecurityMngr.addUser(uvo);
if (success)
result = "C";
does error is about connection between weblogic 10.3.5 with weblogic 8.1.4. or other?
i use OIM 11gR1 bp7, Weblogic 10.3.5,
regards

Similar Messages

I Sight cannot communicate from Imac OS X 10.3.9 to Imac OS 10.4.6

We were in contact by Isight. She broke her camera. She replaced he camera with a new one. After this we have been unable to connect again.
We installed Sightspeed and have been able to communicate using this program.
Any ideas why can we not use Isight?
Thanks,
Gaston

Hi gaston g,
Try this.
Go to /Users/(your account)/Library/Preferences
Delete com.apple.ichat.plist as this hold the camera info.
I take it the camera is seen in iMovie ?
12:50 AM Thursday; June 15, 2006

Ip obtained from WAP, but cannot communicate

I have a Dell Truemobile 1150 wireless pc card. I have all of the device drivers installed (orinoco drivers and pcmcia drivers). I cannot communicate with my WAP and any device on my network. I am using dhcp and have successfully obtained an IP address from my WAP, but I cannot ping it or any computer connected to my network.
I does not make any sense that I can obtain an IP address from my WAP, but I cannot ping it or do anything useful with it. I know it has nothing to do with the default gateway because I cannot even communicate with other computers inside of my network.
Arch Linux is the only distribution that does this. I have tried Slackware and Debian, and they both work fine. However, I do not like Slackware and Debian as much as I like Arch.
# dmesg
orinoco 0.15rc3 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
orinoco_cs 0.15rc3 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
eth1: Hardware identity 0001:0004:0005:0000
eth1: Station identity 001f:0001:0008:000a
eth1: Firmware determined as Lucent/Agere 8.10
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:B4:F6:1E
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 11, io 0x2100-0x213f
eth1: New link status: Connected (0001)
# lsmod
orinoco_cs 15208 1
orinoco 41972 1 orinoco_cs
hermes 6688 2 orinoco_cs,orinoco
pcmcia 25256 1 orinoco_cs
yenta_socket 25580 4
rsrc_nonstatic 10112 1 yenta_socket
pcmcia_core 36848 3 pcmcia,yenta_socket,rsrc_nonstatic
# pccardctl ident
Socket 0:
product info: "Dell", "TrueMobile 1150 Series PC Card", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
Socket 1:
no product info available
# iwconfig eth1
eth1 IEEE 802.11b ESSID:"wireless" Nickname:"HERMES I"
Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C5:92:EA
Bit Rate:11 Mb/s Sensitivity:1/3
Retry limit:4 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=56/92 Signal level=-39 dBm Noise level=-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:02:2D:B4:F6:1E
inet addr:192.168.2.10 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3053 (2.9 Kb) TX bytes:1516 (1.4 Kb)
Interrupt:11 Base address:0x2100

I fixed it. There was some kind of conflict with my other network adapter.

Suddenly I cannot print from firefox. It was printing one day and would not communicate with the printer the next.

Suddenly I cannot print any web pages from Firefox. It was printing one day and not communicating with the printer the next. Did not happen with an upgrade to Firefox or plugins. Printer dialog came up but nothing sent to printer.
== This happened ==
Every time Firefox opened
== suddenly- no known reason

I cannot print from Firefox either all of a sudden. Maybe first thing in the AM, it will print something but then, that's it. I am running OX 10.5 too and using Firefox 3.6.8. I am ready to stop using this!! I like it but it is frustrating. I am on my mac all day for work and cannot find a solution to this Firefox problelm. Maybe Mozilla can help me. Anyone have any answers? I use a HP Laserjet 2300L.
Thanks.
Amy

Error while deploying ear file generated from weblogic to ocj4

Hi All,
I have an .ear file which has been generated from weblogic server.I tried to deploy it on ocj4 aby created a new project in eclipse and deploying it on ocj4.
When I try to run my project it gives me an error:
2008-12-15 19:13:54.811 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page : Exception:oracle.classloader.util.AnnotatedLinkageError: duplicate class definition: javax/xml/rpc/Service
     Invalid class: javax.xml.rpc.Service
     Loader: Test.web.TSOptyQGateWeb:0.0.0
     Code-Source: /C:/OC4J_10.1.3.4/j2ee/home/applications/Test/TSOptyQGateWeb/WEB-INF/lib/jaxrpc.jar
     Configuration: WEB-INF/lib/ directory in C:\OC4J_10.1.3.4\j2ee\home\applications\Test\TSOptyQGateWeb\WEB-INF\lib
     Dependent class: oracle.jsp.runtimev2.JspPageInstFacade$DeclaredAction
     Loader: oc4j:10.1.3
     Code-Source: /C:/OC4J_10.1.3.4/j2ee/home/lib/ojsp.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\OC4J_10.1.3.4\j2ee\home\oc4j.jar
     The original class instance was defined in the shared-library oracle.ws.jaxrpc:1.1, and oc4j:10.1.3 does import that loader. This may be a search-order problem.
Can anyone help??

Hi,
I checked the log-files, but there are no helpful informations, but:
07/04/23 12:08:04 - Start updating EAR file...
07/04/23 12:08:04 - start-up mode is lazy
07/04/23 12:08:20 - com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file Docsndownloads.war
                     com.sap.engine.services.deploy.ear.exceptions.BaseIOException: Error during replacement of substitution values. Reason:
                      java.io.IOException: Stream closed
and
Apr 23, 2007 12:08:20... Error: Aborted: development component 'Dokusunddownloads'/'sap.com'/'localhost'/'2007.04.23.12.07.47'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file Docsndownloads.war
com.sap.engine.services.deploy.ear.exceptions.BaseIOException: Error during replacement of substitution values. Reason:
java.io.IOException: Stream closed
thanks,
Lu

IPod Cannot Communicate with iTunes

I have been using my ipod/itunes for a while now, but yesterday when I connected my ipod (5th gen Video) to my computer itunes gave me the following error message:
"The software required for communicating with the ipod is not installed correctly. Please reinstall iTunes to install the iPod's software"
Well, I did this it didnt work, same error. So I decided to delete all itunes/ipod software from my computer and reinstalled itunes from my initial cd. Plugged in my ipod, same error. I have gone through the 5 R's those didnt work. My iTunes opens and my library is there but I cannot sync with iPod because they cannot communicate so I cannot add any new music to my ipod. Any suggestions?

okay.
sometimes in earlier versions of itunes (itunes 6.0.x), that message could be caused by a snarlup in the registry keys on the PC. (plausibly in this case something like that might be related to the problem with the administrator account.)
in the 6.0.x days we could get some relief from that sometimes by applying the markinmadison technique:
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
(in your case, rather than reinstalling itunes and the ipod updater, you'd just be reinstalling itunes. the ipod updater is no longer a standalone application ... itunes 7.0.x itself is used for updates and installs.)

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

After moving from weblogic 10.0.0 to Weblogic 10.3.3 - JMSException

After moving from weblogic 10.0.0 to Weblogic 10.3.3, web-application began to raise next exception:
<Dec 4, 2012 3:52:05 PM CET> <Error> <HTTP> <pl-1> <traffic-1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1354632725104> <BEA-101017> <[ServletContext@518010907[app:XXXX-XXXX module:/XXXXXX-connector-servlet path:/XXXXXX-connector-servlet spec-version:2.5]] Root cause of ServletException.
javax.jms.JMSException: [JMSPool:169801]The JMS method setMessageListener may not be called inside an EJB or servlet
at weblogic.deployment.jms.JMSExceptions.getJMSException(JMSExceptions.java:22)
at weblogic.deployment.jms.WrappedMessageConsumer.preInvocationHandler(WrappedMessageConsumer.java:116)
at weblogic.deployment.jms.WrappedMessageConsumer_weblogic_jms_client_WLConsumerImpl.setMessageListener(Unknown Source)
at XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.createAndStart(OperatorMessageSession.java:174)
at XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.getWork(XXXXXXXXXServlet.java:265)
at XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.doRequest(XXXXXXXXXServlet.java:168)
at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:100)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3700)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3664)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2276)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2175)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1452)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Could anybody help me with this problem? Maybe there are any standard ways to fix this?

I've rebuilt my web-application using MDB. For now I got new exception:
####<07.12.2012 16:03:06 FET> <Info> <EJB> <pc-XXXXXX> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-00340877198035A73969> <> <1354885386932> <BEA-010227> <EJB Exception occurred during invocation from home or business: weblogic.ejb.container.internal.StatelessEJBHomeImpl@14df37f threw exception: javax.ejb.EJBTransactionRolledbackException: EJB Exception: : java.lang.ClassCastException: com.XXX.XXXX.XXXXXX.persistence.OperatorBean cannot be cast to com.XXX.XXXX.XXXXXX.persistence.SwitchboardBean
     at com.XXX.XXXX.XXXXXX.SwitchboardDataImpl.initialize(SwitchboardDataImpl.java:147) // itsSwitchboardBean = itsEntityManager.find(SwitchboardBean.class, switchboardNumber);
     at com.XXX.XXXX.XXXXXX.SwitchboardDataImpl.create(SwitchboardDataImpl.java:86)
     at com.XXX.XXXX.XXXXXX.SwitchboardDataEJB.create(SwitchboardDataEJB.java:64)
persistence.xml:
...     <persistence-unit name="xxxSwitchboard_PU" transaction-type="JTA">
          <provider>org.apache.openjpa.persistence.PersistenceProviderImpl</provider>
<jta-data-source>jdbc/xxSwitchboard</jta-data-source>
<non-jta-data-source>jdbc/xxSwitchboard</non-jta-data-source>
          <class>com.XXX.XXXX.XXXXXX.switchboard.persistence.OwnerBean</class>
          <class>com.XXX.XXXX.XXXXXX.switchboard.persistence.OperatorBean</class>
          <class>com.XXX.XXXX.XXXXXX.switchboard.persistence.SwitchboardBean</class>
          <class>com.XXX.XXXX.XXXXXX.switchboard.persistence.CallBean</class>
          <exclude-unlisted-classes>false</exclude-unlisted-classes>
     </persistence-unit>...
@Entity
public class OperatorBean extends OwnerBean
@ManyToOne(optional = true, fetch = FetchType.EAGER)
private SwitchboardBean switchboard;
@Entity
public class SwitchboardBean extends OwnerBean
@OneToMany(mappedBy = "switchboard", cascade = CascadeType.PERSIST, fetch = FetchType.LAZY)
private List<OperatorBean> itsOperators = new ArrayList<OperatorBean>();
Seems that it also happened due to updating weblogic version. Could you please advice me how to fix this issue?

URGENT : Error: nca_connect_server: cannot communicate host ...on port....

URGENT : Error: nca_connect_server: cannot communicate host ...on port....
Platform :
front end - Forms6i
App Server - Oracle 9iAS
Testing tool - Mercurry Load Runner 8.0
Database - Oracle 9i
Hi Gurus,
I am trying to run a script in Load runner but its always coming out by following error message -
vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
vuser_init.c(63): Warning: ifError expired (5)
vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
Abort was called from an action.
forms url which used in test script is running fine without any error with same port, I am wondering why it is returning error with Load Runner ?
Quick help on pinpointing the issue will be highly appreciated, Following is the Loadrunner script m using -
vuser_init()
     web_set_max_html_param_len("1024");
     web_url("f6isrvl",
          "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en",
          "Resource=0",
          "RecContentType=text/html",
          "Referer=",
          "Snapshot=t1.inf",
          "Mode=HTML",
          EXTRARES,
          "Url=../forms60java/f60web.jar", "Referer=", ENDITEM,
          "Url=../forms60java/FImageBean.jar", "Referer=", ENDITEM,
          "Url=../forms60java/images.jar", "Referer=", ENDITEM,
          LAST);
     web_url("Registry.dat",
          "URL=http://202.46.209.42:7778/forms60java/oracle/forms/registry/Registry.dat",
          "Resource=0",
          "RecContentType=text/plain",
          "Referer=",
          "Snapshot=t2.inf",
          "Mode=HTML",
          LAST);
     web_reg_save_param("NCAJServSessionId",
          "LB=",
          "RB=",
          "Search=Noresource",
          LAST);
     web_url("f6isrvl_2",
          "URL=http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession",
          "Resource=0",
          "RecContentType=text/plain",
          "Referer=",
          "Snapshot=t3.inf",
          "Mode=HTML",
          EXTRARES,
          "Url=f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class", "Referer=", ENDITEM,
          "Url=../forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class", "Referer=", ENDITEM,
          LAST);
     nca_set_connect_opt(SCALE_INFO, 8, 20);
     nca_set_connect_opt(REQUIRED_LIST, 0);
     nca_connect_server("202.46.209.42", "7778", "module=ulgprc_em_100_01_c.fmx userid=dbk/dbk@dbkls05 ORA_USER=devjp10 USR_LANG=ENG");
     nca_set_window("Login");
     nca_edit_set("27", "SSC");
     nca_obj_type("27", '\t', 0);
     nca_edit_set("30", lr_decrypt("44b61ad9b8d2295c3768adc952f4"));
     nca_button_press("32");
     nca_message_box_press("Forms", 2);
     nca_menu_select_item("SSC", "Lending;Underwriting");
     nca_set_window(" (Underwriting)(Pending Request : 0)");
     nca_button_set("386", 1);
     nca_menu_select_item(" (Underwriting)(Pending Request : 0)", "Edit;Exit");
     nca_set_window("SSC");
     nca_menu_select_item("SSC", "File;Exit");
     return 0;
Execution Log
Virtual User Script started
Starting action vuser_init.
vuser_init.c(12): web_set_max_html_param_len was successful      [MsgId: MMSG-26392]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/f60web.jar" (specified by argument number 9)      [MsgId: MMSG-26577]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/FImageBean.jar" (specified by argument number 12)      [MsgId: MMSG-26577]
vuser_init.c(14): Downloading resource "http://202.46.209.42:7778/forms60java/images.jar" (specified by argument number 15)      [MsgId: MMSG-26577]
vuser_init.c(14): web_url("f6isrvl") was successful, 1882891 body bytes, 1386 header bytes, 12 chunking overhead bytes      [MsgId: MMSG-26385]
vuser_init.c(27): web_url("Registry.dat") was successful, 4117 body bytes, 367 header bytes      [MsgId: MMSG-26386]
vuser_init.c(36): Registering web_reg_save_param was successful      [MsgId: MMSG-26390]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/f6i/f6ilsnr/?JServSessionIdf6i=i7yjfl33c1.f45nez95eiGIpR1vp2TD/knGnluImQXHcALJmQ5Go6XNr3CSa30R&ifcmd=getinfo&ifhost=MILDH0417&ifip=10.81.6.127" (specified by argument number 9)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceListener.class" (specified by argument number 12)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSource.class" (specified by argument number 15)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/ArrayOneDDataSource.class" (specified by argument number 18)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/AbstractOneDDataSource.class" (specified by argument number 21)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceAdapter.class" (specified by argument number 24)      [MsgId: MMSG-26577]
vuser_init.c(42): Downloading resource "http://202.46.209.42:7778/forms60java/oracle/ewt/dataSource/OneDDataSourceEvent.class" (specified by argument number 27)      [MsgId: MMSG-26577]
vuser_init.c(42): Warning -26652: Response body length (96) does not match the Content-Length header specification (95) for "http://202.46.209.42:7778/f6i/f6isrvl?config=devjp10_en&acceptLanguage=en-us&ifcmd=startsession"      [MsgId: MWAR-26652]
vuser_init.c(42): web_url("f6isrvl_2") highest severity level was "warning", 4459 body bytes, 3017 header bytes      [MsgId: MMSG-26388]
vuser_init.c(59): nca_set_connect_opt("SCALE_INFO")
vuser_init.c(61): nca_set_connect_opt("REQUIRED_LIST")
vuser_init.c(63): Warning: ifError expired (5) during NCA handshake,
vuser_init.c(63): Warning: ifError expired (5)
vuser_init.c(63): Error: nca_connect_server: cannot communicate with host 202.46.209.42 on port 7778
Abort was called from an action.
TIA,
Sheilesh

Well, the obvious question is what does 'mail.wbe-pli.com' translate to on the machine?
Does it translate to your public IP address, in which case your traffic has to go out through your router and come back in? In addition to not being ideal, that's also not supported by a number of different routers (they can't handle NAT traffic coming back in from the private network).
In most cases the solution is to setup internal DNS so that your hostname maps to the internal address of your server, not the external one.
In this case, though, you could also configure Mail.app to use 'localhost' for the mail server, rather than 'mail.wbe-pli.com'. That will enable it to talk to the server running on the local system.

Itunes cannot communicate with my iphone

I installed an update and then I tried to restore and i received a message that my iphone (4s) cannot communicate with itunes. (on mac) Any suggestions?

Hello there kellynocca,
Given what you are describing I recommend starting here with the iOS: Troubleshooting USB connection article: http://support.apple.com/kb/ts1286.
Once you determine that your computer has a USB 2.0 connection, use the following steps to troubleshoot the connection between the device and the computer. Test after each step:
Update to the latest version of iTunes.
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the device from the dock and connect it to the computer using only the Apple USB to Dock Connector cable.If you have access to additional Apple USB to Dock Connector cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
Another article describes what to do if you are using Windows and see an unknown error containing "0xE" when connecting your device.
IF that does not get your device to communicate with iTunes correctly I recommend restarting both the computer and the iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
As a last resort I would recommend backing up to iCloud, and restoring the device.
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Regards,
Sterling

ITunes cannot communicate with iPod

I just bought an iPod nano, but when I connect it to my computer, it says that iTunes cannot communicate with the iPod to initialize the iPod, and that I should reinstall iTunes.
I have already uninstalled and reinstalled iTunes about 5 times, using the directions on the support webpage. I've checked my drivers and everything.
Also, no matter what, whenever I click on the iTunes icon to start it, it always takes 3-5 minutes for the iTunes program to pop up.

okay.
sometimes in earlier versions of itunes (itunes 6.0.x), that message could be caused by a snarlup in the registry keys on the PC. (plausibly in this case something like that might be related to the problem with the administrator account.)
in the 6.0.x days we could get some relief from that sometimes by applying the markinmadison technique:
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
(in your case, rather than reinstalling itunes and the ipod updater, you'd just be reinstalling itunes. the ipod updater is no longer a standalone application ... itunes 7.0.x itself is used for updates and installs.)

Migrating applciation from weblogic to oracle 9i application server(OC4J)??????

Hi,
I am migrating my ejb application from weblogic to oracle 9i application server.What changes are needed to be made in code and what configuration changes are required.
In my application i use a couple of session beans wherin a session bean calls the method of the other session bean which acceses the database.I am using a jdbc thin driver for the database connection. is it possible for a session bean to call a method of another session bean which access the database??This concept works well in weblogic where the current application is running.
The problem is that while migrating the application to the orion server, it gives an OrionCMTException ...
memory leak..etc.
Could any one clarify.
Thanks in advance!!!

Hi Avi and Harrison,
Cease Fire avi!!!!.First of all let me clear the issue of posting the same problem twice.Well, when i mentioned the problem the first time , i found the title session bean deployment was not right and few people would look into it as it was a common problem so i thought it would be appropriate if i mentioned the title correctly , so i posted the query again with the change in title.
Now coming to the answer for ur questions.
The platform used is MS Windows NT.
The (OC4J) version is 1.0.2.2.1.
I am not using JDeveloper.
The database is oracle 8i and i am using the thin driver.
The beans to be deployed are stateless session beans.
The client involved is a web client i.e a jsp application.
The first session bean is as follows.
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import java.sql.Timestamp;
import java.rmi.RemoteException;
import java.util.Date;
import javax.ejb.*;
import javax.naming.*;
import initcontext;
import PrintMessage;
import JB_B2B_ERROR_PARSER;
* @stereotype SessionBean
* @homeInterface DB_UTILITYHome
* @remoteInterface DB_UTILITYRemote
public class DB_UTILITY implements SessionBean
     private SessionContext context;
private ResultSet rs = null;
private Statement stmt = null;
private Connection con = null;
private PrintMessage print = null;
public DB_UTILITY()
rs = null;
stmt = null;
con = null;
print = new PrintMessage();
     public Connection getConnection()throws RemoteException
          InitialContext initctx = null;
          Connection con = null;
          try
               initctx = initcontext.getContext();
               javax.sql.DataSource ds =
(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
               con = ds.getConnection();
//(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
catch(NamingException namingexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", namingexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("AppError",
"Epool-10001", "DB_UTILITY.getConnection"));
catch(SQLException sqlexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception),
"DB_UTILITY.getConnection"));
catch(Exception exception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("EpoolError",
"Epool10005", "DB_UTILITY.getConnection"));
          return con;
     public String getDate()throws RemoteException
          String Date=null;
          try
               con=getConnection();
               stmt=con.createStatement();
               rs=stmt.executeQuery("SELECT
TO_CHAR(SYSDATE,'YYYY-MM-DD HH:MI:SS') FROM DUAL");
               while(rs.next())
                    Date=rs.getString(1);
               stmt.close();
               con.close();
catch(SQLException sqlexception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception), "DB_UTILITY.getDate"));
catch(Exception exception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("epoolError",
"Epool10005", "DB_UTILITY.getDate"));
finally
try
if(con != null && !con.isClosed())
con.close();
catch(Exception exception2)
stmt = null;
con = null;
          return Date;
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
Also the xml files are as follows.
web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<display-name>AddressBook Web Application</display-name>

<description>Web module that contains an HTML welcome page, and 4 JSP's.</description>

<welcome-file-list>
<welcome-file>B2B_COUNTRY_CODE.jsp</welcome-file>
</welcome-file-list>
<ejb-ref>
<ejb-ref-name>SB_B2B_COUNTRY_CODEHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>SB_B2B_COUNTRY_CODEHome</home
<remote>SB_B2B_COUNTRY_CODERemote</remote>
</ejb-ref></web-app>
Application.xml
<?xml version="1.0"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN" "http://java.sun.com/j2ee/dtds/application_1_2.dtd">
<application>
<display-name>Country Code</display-name>
<module>
<ejb>epool_CountryCode-ejb.jar</ejb>
</module>
<module>
<web>
<web-uri>epool_CountryCode-web.war</web-uri>
<context-root>/epool_CountryCode-web</context-root>
</web>
</module>
</application>
ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN" "http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd">
<ejb-jar>
<description>epool_CountryCode</description>
<enterprise-beans>
<session>
<display-name>CountryCode Session
Bean</display-name>
<ejb-name>SB_B2B_COUNTRY_CODERemote</ejb-name>
<home>SB_B2B_COUNTRY_CODEHome</home>
<remote>SB_B2B_COUNTRY_CODERemote</remote>
<ejb-class>SB_B2B_COUNTRY_CODE</ejb-class>
<session-type>Stateless</session-type>
<ejb-ref>
<description>EJB Epool DButility</description>
     <ejb-ref-name>DB_UTILITYRemote</ejb-ref-name>
               <ejb-ref-type>Session</ejb-ref-type>
               <home>DB_UTILITYHome</home>
               <remote>DB_UTILITYRemote</remote>
          </ejb-ref>
          <ejb-ref>
          <description>EJB Entity Bean</description>
<ejb-ref-name>EB_B2B_COUNTRY_CODERemote</ejb-ref-name>
               <ejb-ref-type>Entity</ejb-ref-type>
               <home>EB_B2B_COUNTRY_CODEHome</home>
          <remote>EB_B2B_COUNTRY_CODERemote</remote>
          </ejb-ref>
</session>
<session>
<display-name>DbUtility Session Bean</display-name>
<ejb-name>DB_UTILITYRemote</ejb-name>
<home>DB_UTILITYHome</home>
<remote>DB_UTILITYRemote</remote>
<ejb-class>DB_UTILITY</ejb-class>
<session-type>Stateless</session-type>
</session>
<entity>
<ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
     <home>EB_B2B_COUNTRY_CODEHome</home>
     <remote>EB_B2B_COUNTRY_CODERemote</remote>
     <ejb-class>EB_B2B_COUNTRY_CODE</ejb-class>
     <persistence-type>Container</persistence-type>
     <prim-key-class>EB_B2B_COUNTRY_CODEPK</prim-key-class>
     <reentrant>False</reentrant>
     <cmp-field>
     <field-name>country_code_desc</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>phone_format_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_date</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_phone_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_tax_percent</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>sort_order</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_modified</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_modified</field-name>
     </cmp-field>
     <resource-ref>
     <description></description>
     <res-ref-name>jdbc/ePool</res-ref-name>
     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
     </resource-ref>
</entity>
</enterprise-beans>
<assembly-descriptor>
     <container-transaction>
          <method>
               <ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
               <method-name>*</method-name>
          </method>
          <trans-attribute>Required</trans-attribute>
</container-transaction>
<security-role>
<description>Users</description>
<role-name>users</role-name>
</security-role>
</assembly-descriptor>
</ejb-jar>
The session bean which uses the above session bean is as follows.
import javax.ejb.SessionContext;
import javax.ejb.SessionBean;
import java.sql.*;
import javax.naming.Context;
import java.sql.Timestamp;
import java.util.Vector;
import initcontext;
import DB_UTILITYHome;
import DB_UTILITYRemote;
import EB_B2B_COUNTRY_CODEHome;
import EB_B2B_COUNTRY_CODERemote;
import EB_B2B_COUNTRY_CODEPK;
* @stereotype SessionBean
* @homeInterface SB_B2B_COUNTRY_CODEHome
* @remoteInterface SB_B2B_COUNTRY_CODERemote
public class SB_B2B_COUNTRY_CODE implements SessionBean
     private SessionContext context;
     * Sets the context of the bean
     * @param context The Bean's Context
     public Vector selectCountryCode(String query,String
countquery, String pagenos) throws Exception
          Context ctx = initcontext.getContext();
          Connection con=null;
          Vector records=new Vector();
          int pageno=Integer.parseInt(pagenos);
          int min=(pageno-1)*10;
          int max=pageno*10;
          int counter=0;
          boolean recordsfound=false;
          try
               DB_UTILITYHome home =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote remote =
(DB_UTILITYRemote)home.create();
               con=remote.getConnection();
               Statement stmt = con.createStatement();
               ResultSet rscount =
stmt.executeQuery(countquery);
               while(rscount.next())
                    int temp=rscount.getInt(1);
                    int pagecount=temp;
                    pagecount=pagecount/10;
                    if((temp%10)>0)
                    pagecount=pagecount+1;
                    records.addElement(""+pagecount);
               ResultSet rs = stmt.executeQuery(query);
               while(rs.next())
                    counter++;
                    if(counter>min && counter<=max)
                         String row[]=new String[8];
                         recordsfound=true;
                         row[0]=rs.getString(1);
                         row[1]=rs.getString(2);
                         row[2]=rs.getString(3);
                         row[3]=rs.getString(4);
                         row[4]=rs.getString(5);
                         row[5]=rs.getString(6);
                         row[6]=rs.getString(7);
                         row[7]=rs.getString(8);
                         records.addElement(row);
          con.close();
          catch(Exception e)
               System.out.println("Error in selecting Country
Code "+e);
               throw new Exception("Error in selecting Country
Code "+e);
          return(records);
     public void insertCountryCode(String country_code, String
country_code_desc, String country_phone_code, String
phone_format_flag,String active_flag, String sort_order,String
country_tax_percent)throws Exception
          Context ctx = initcontext.getContext();
          Double Sort_Order=null;
          Double cntry_tax_prct=null;
          if(sort_order!=null && sort_order.length()>0)
          Sort_Order=new Double(sort_order);
          if(country_tax_percent!=null &&
country_tax_percent.length()>0)
          cntry_tax_prct=new Double(country_tax_percent);
          String user_created=null;
          Timestamp date_created=null;
          Timestamp active_date=null;
          String user_modified=null;
          Timestamp date_modified=null;
          try
               DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote dbremote =
(DB_UTILITYRemote)dbhome.create();
               user_created=dbremote.getUser();
date_created=Timestamp.valueOf(dbremote.getDate());
               active_date=date_created;
               EB_B2B_COUNTRY_CODEHome home =
(EB_B2B_COUNTRY_CODEHome)ctx.lookup("java:comp/env/EB_B2B_COUNTRY_CODER
emote");
               EB_B2B_COUNTRY_CODERemote remote =
(EB_B2B_COUNTRY_CODERemote)home.create(country_code, country_code_desc,
country_phone_code,active_flag, phone_format_flag,user_created,
date_created, active_date, Sort_Order, user_modified,
date_modified,cntry_tax_prct);
          catch(Exception e)
               System.out.println("Error in Creating COUNTRY
Code "+e);
               throw new Exception("Error in Creating COUNTRY
Code "+e);
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
The jsp client which acces the beans is as follows.
<BODY >
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<%@ page import="initcontext" %>
<%@ page import = "java.util.*" %>
<%@ page import="DB_UTILITYHome"%>
<%@ page import="DB_UTILITYRemote"%>
<%@ page import="javax.naming.*"%>
<%Connection con=null; %>
<script src="search_getvalues.js">
</script>
<form name=frm1>
<%! int intCount,intI,intRowCount,intJ;
String strtname=new String();
String strhidden=new String("txthdn");
     Statement st;
     ResultSet rs;
     ResultSetMetaData rmeta;
....%>
<%
try
     Context ctx = initcontext.getContext();
     DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
     DB_UTILITYRemote dbremote = (DB_UTILITYRemote)dbhome.create();
     con=dbremote.getConnection();
     st=con.createStatement();
     rs=st.executeQuery(strsqlquery);
     rmeta=rs.getMetaData();
intCount=rmeta.getColumnCount();
....... %>
</form>
</BODY>
</HTML>
The resulting exception generated is as follows:
D:\oc4j\j2ee\home>java -jar orion.jar
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... done.
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e\epool_CountryCode-web.war... done.
Auto-deploying epool_CountryCode (New server version detected)...
Auto-deploying epool_CountryCode-ejb.jar (No previous deployment
found)... done.
Error deploying
file:/D:/oc4j/j2ee/home/demo/messagelogger/messagelogger-ejb.jar homes:
No javax.jms.Destination found a
t the specified destination-location (jms/theTopic) for
MessageDrivenBean com.evermind.logger.MessageLogger
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
Auto-deploying epool countryCode example (New server version
detected)...
************************1
************************2
COUNT QUERY :SELECT COUNT(COUNTRY_CODE) FROM BAP_COUNTRY_CODE
QUERY :SELECT
COUNTRY_CODE,COUNTRY_CODE_DESC,COUNTRY_PHONE_CODE,PHONE_FORMAT_FLAG,COU
NTRY_TAX_PERCENT ,SORT_ORDER,ACTIVE
FLAG,ACTIVEDATE FROM BAP_COUNTRY_CODE order by COUNTRY_CODE
Error in selecting Country Code java.rmi.RemoteException: Error
(de-)serializing object: com.evermind.sql.OrionCMTConnec
tion; nested exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
JB:Error in selecting country cd java.lang.Exception: Error in
selecting Country Code java.rmi.RemoteException: Error (d
e-)serializing object: com.evermind.sql.OrionCMTConnection; nested
exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
Error in Selecting Records
OrionCMTConnection not closed, check your code!
LogicalDriverManagerXAConnection not closed, check your code!
(Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... Error unpacking: IO Error:
The system cannot find the path specified
Error updating application epool_CountryCode: Unable to find/read
assembly info for D:\oc4j\j2ee\home\applications\epool_C
ountryCode\build\epool_CountryCode (META-INF/application.xml)
But if the DBUTILITY session bean is changed to a simple bean and accessed the code works fine and i am able to retrieve the data.Is the problem there because u one session bean cannot access a database connection method from another one or could it be because of the driver???
I hope i am clear.Please revert back in case any more references are needed.
Thanks in advance!!!!!!

CRS-4535: Cannot communicate with Cluster Ready Services

[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/cluvfy stage -post crsinst -n bnl11237dat01,bnl11237dat02 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bnl11237dat01"
Destination Node Reachable?
bnl11237dat01 yes
bnl11237dat02 yes
Result: Node reachability check passed from node "bnl11237dat01"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
bnl11237dat02 passed
bnl11237dat01 passed
Result: User equivalence check passed for user "oracle"
ERROR:
Unable to obtain network interface list from Oracle Clusterware (OIFCFG)
Verification cannot proceed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@bnl11237dat01 ~]$ oifcfg iflist
bond1 10.32.25.160
bond2 10.32.17.200
bond2 169.254.0.0
bond0.1515 10.32.24.0
bond0.1536 172.16.7.0
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p
bond1 10.32.25.160 PRIVATE
bond2 10.32.17.200 PRIVATE
bond2 169.254.0.0 UNKNOWN
bond0.1515 10.32.24.0 PRIVATE
bond0.1536 172.16.7.0 PRIVATE
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p -n
bond1 10.32.25.160 PRIVATE 255.255.255.240
bond2 10.32.17.200 PRIVATE 255.255.255.248
bond2 169.254.0.0 UNKNOWN 255.255.0.0
bond0.1515 10.32.24.0 PRIVATE 255.255.255.192
bond0.1536 172.16.7.0 PRIVATE 255.255.255.0
[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/onsctl debug
HTTP/1.1 200 OK
Content-Length: 1923
Content-Type: text/html
Response:
== bnl11237dat01:6200 8732 11/05/19 11:44:09 ==
Home: /u01/app/11.2.0/grid
======== ONS ========
IP ADDRESS PORT TIME SEQUENCE FLAGS
127.0.0.1 6200 4dd4f2a3 00000000 00000008
Listener:
TYPE BIND ADDRESS PORT SOCKET
Local 127.0.0.1 6100 5
Remote any 6200 7
Remote any 6200 -
Connection Topology: (1)
IP PORT VERS TIME
127.0.0.1 6200 4 4dd4f2a3=
Client connections:
ID CONNECTION ADDRESS PORT FLAGS SENDQ REF SUB W
0 internal 0 01008a 00000 001 002
2 127.0.0.1 6100 01001a 00000 001 001
1 127.0.0.1 6100 01001a 00000 001 001
3 127.0.0.1 6100 01001a 00000 001 001
4 127.0.0.1 6100 01001a 00000 001 001
7 127.0.0.1 6100 01001a 00000 001 000
request 127.0.0.1 6100 03201a 00000 001 000
Worker Ticket: 10/10, Last: 11/05/19 11:42:21
THREAD FLAGS
40460940 00000012
405b4940 00000012
41280940 00000012
Resources:
Notifications:
Received: Total 0 (Internal 0), in Receive Q: 0
Processed: Total 0, in Process Q: 0
Pool Counts:
Message: 1, Link: 1, Ack: 1, Match: 1
[oracle@bnl11237dat01 ~]$
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl stop crs
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crsd' on 'bnl11237dat01'
CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.bnl11237dat01.vip' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.oc4j' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cvu' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.bnl11237dat01.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.cvu' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan1.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.bnl11237dat02.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan3.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan2.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.scan1.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.bnl11237dat02.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan3.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan2.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.oc4j' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.ons' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.ons' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.net1.network' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.net1.network' on 'bnl11237dat01' succeeded
CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01' has completed
CRS-2677: Stop of 'ora.crsd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crf' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.ctssd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.evmd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.mdnsd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.crf' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.evmd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.ctssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.diskmon' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.gipcd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.diskmon' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.gpnpd' on 'bnl11237dat01' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01' has completed
CRS-4133: Oracle High Availability Services has been stopped.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
I am unable to start Oracle Cluster Service on 11.2.0.2. Please can I know what the problem is and how to start CRS
thanks.

Hi,
after the crsctl start crs you have to wait a while till the clusterstack is up. You just issued crsctl check crs a little to early.
To see the startup stack do a crsctl stat res -t -init.
If not everything in crsctl stat res -t -init goes to online after a while, then you have a problem, which has to be analyzed.
However if crsctl stat res -t -init show everything is started use crsctl stat res -t to see the other processes coming online.
Can you post the crsctl stat res -t -init (if not everything is online) or a crsctl stat res -t.
Only thing which I find strange is that oifcfg does not list a PUBLIC interface...
Regards
Sebastian

Cannot Communicate with Datasocket Servers on Private Networks

I have not had the opportunity to confirm nor deny the reports I'm getting about an application that I've built and distributed, but let me give you the details and I'd like to know if anyone has heard of this and might be able to give me some words of wisdom.
I have a rather simple program that uses a datasocket server to publish data that multiple client computers read (the clients are ONLY readers, and the host is the only writer). The computers are all connected to a 4-port router, and the computers within the network can ping each other, FTP files back and forth to each other, and can also share Windows shares (they're all WinXP computers). These computers have their firewalls completely turned off, and the router has no built-in firewall; my contacts have tested 4 different models of routers and get the same behavior on all 4 of them.
Anyway, on a closed network where the router is NOT plugged into the internet, the client machines cannot communicate with the Datasocket server via dstp (or any mechanism thereof). To communicate with the datasocket server, I use the raw IP address of the computer, like: dstp://192.168.1.100/namespace/variable. When the software attempts to make the connection, errors saying the datasocket server/variable does not exist spew out. Remember that machines on this network can ping each other, communicate with each other via windows shares, and can even FTP files back and forth.
Once a live internet connection is plugged into the router, everything seems to spring to life. All communication with the datasocket server immediately begins working (when it is attempted to connect again).
I initially thought the problem might be related to a stale DNS server entry in the network configuration, but even after resetting the router (so that the router has default values and points to itself for DNS lookups) the problem still exists. They've rebooted the computers connected to the router NOT on the internet to make sure all the new network values are taken, and still no luck.
Has anyone run into this and found a workaround? Unfortunately where we need to set up this network is not near a live internet connection, and we're beginning to be SOL if we cannot find an adequate workaround.
Thanks!
-Danny

Danny,
This definitely seems like an issue with your router/configuration -- unfortunately after searching around I don't have much to offer, but here are a few thoughts --
Is it possible that the router is somehow dependent on its uplink port being connected? Have you searched the router's configuration utility/KnowledgeBase for anything that sounds like this issue? Could it be possible to disable this? Is it possible that some application, whether on the router itself or an application on your client PCs is constantly trying to ping something on the internet and hogging bandwidth because a connection cannot be established?
I was a little confused by these two statements which seem conflicting:
"When the software attempts to make the connection, errors saying the datasocket server/variable does not exist spew out."
"I am usually able to connect to the datasocket
server, but my data coming from the datasocket server is VERY slow and
very spotty. My data becomes stale and is not refreshed any more."
Are you still getting errors as mentioned in the first statement? If not, what changed?
One thing that may be of use is to use a low level traffic monitoring utility like Ethereal and compare packet types and volumes when the Internet is connected and when it is not.
Message Edited by Doug M on 12-15-2006 04:28 PM
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Cannot read from policy store.

Hi All,
while starting our managed server(soa_server1) we are getting below error.
we tried removing cache, tmp and data and fresh restart but no luck.
The Memory on the mount point was 100% full, we have freed some memroy but now the server is not coming up.
Any solutin or pointer would be really helpful.
<Apr 3, 2013 1:17:14 PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/app/Middleware/user_projects/domains/dev1_aia_domain/servers/soa_server1/logs/soa_server1.log is opened. All server side log events will be written to this file.>
oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1020)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:216)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:436)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:228)
... 26 more
Caused by: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
... 33 more
Caused by: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:100)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:317)
... 34 more
<Apr 3, 2013 1:17:19 PM EST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>
<Apr 3, 2013 1:17:19 PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:285)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: Cannot read from policy store.
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:440)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:227)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
ed
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:418)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:283)
Truncated. see log file for complete stacktrace
Caused By: javax.xml.stream.XMLStreamException: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:80)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:99)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:316)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
Truncated. see log file for complete stacktrace
Caused By: javax.xml.stream.XMLStreamException: Premature end of file encountered
at weblogic.xml.stax.XMLStreamReaderBase.prime(XMLStreamReaderBase.java:69)
at weblogic.xml.stax.XMLStreamReaderBase.setInput(XMLStreamReaderBase.java:100)
at weblogic.xml.stax.XMLStreamInputFactory.createXMLStreamReader(XMLStreamInputFactory.java:317)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:98)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
Truncated. see log file for complete stacktrace
>
<Apr 3, 2013 1:17:20 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Apr 3, 2013 1:17:20 PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Apr 3, 2013 1:17:20 PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Hi,
Your issue is something similar to the issue described in below metalink id. Please check below metalink id, you issue may be resolved.
Start OMS failed with "javax.xml.stream.XMLStreamException: Premature end of file encountered" [ID 1481158.1]
Mark if this helps you.
Regards,
Kishore

Cannot communicate from weblogic 10.3.5 to weblogic 8.1.4 (OIM 11gR1)

Similar Messages

Maybe you are looking for