Cannot create storage target
I regularly receive this error message when trying to save a file that already exists - that is to say, overwriting an existing file after modifying it:
When it occurs I simply press CTRL+S and save it that way.
I'd be grateful for any clues as it means nothing to me.
Regards.
Hi Simon,
I've tried to recreate the problem without any luck (perhaps not surprising, as it would be more widely reported if it was that easy to occur).
I found one other reported instance of this problem where it was also on a server machine, and one where the save was on the D: drive, so I'm not sure that the remote save is causing the problem (saving on network is a common scenario).
You could try repairing DIAdem which may solve the problem, but if the CTRL+S is working ok for you, it might be best just to continue with that for the future.
Regards,
Ian S
Applications Engineer CLD
National Instruments UK&Ireland
Similar Messages
-
(Apologies, but this somehow ended up in the IF-RIO folder! This happens to me a lot...)
I'm following the National Instruments help guide to create an FPGA targeted project, but I cannot see any FPGA targets in the Add Targets and Devices list. Ultimately, I want to add a compact FieldPoint system (no hardware yet) to the project.
This is the help page:
Step 4. Instructs to expand the FPGA Target folder. As you can see from my targets list, there is no such folder.
I have everything (literally) installed from our latest Full Development Suite of LabVIEW 8.6, on my Windows XP Pro system.
Am I missing something?
Message Edited by Thoric on 10-14-2008 10:25 AM
Thoric (CLA, CLED, CTD and LabVIEW Champion)
Attachments:
newtarget1.jpg 105 KB
newtarget2.jpg 18 KBMost likely, both of you have a software install issue.
First, verify you have LabVIEW FPGA Installed in your Measurement & Automation Explorer Software tab.
Once this is installed, you must install the latest NI-RIO driver(can be found on our website, latest version is 3.1.1). If you install the NI-RIO driver BEFORE you have LVFPGA installed, then it will not add support since it detects that you wont need it.
Once you have that installed both of these, you should be able to right click on My Computer in the project tree and add the device.
For a quick check if you did this correctly, if you can find FPGA examples in the example finder, then you have installed it correctly. If you cannot find FPGA examples, then you have not.
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video -
Cannot create target element /Invoice. Values missing in queue context.
Hi Experts,
I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
Regards,
Saurabh
Edited by: saurabh mathure on Oct 16, 2010 8:14 AMHi ,
issue"Can not create the target element value missing the queue context'.
reason for this issue:
Target field expecting some value from sender field. so in testing your not getting any data from source field for this reason your getting that issue.
Solution:
In mapping use node function:Mapwith deafault between source and taget fileds.
Then activate mapping . now excute the scenario it will properly without that issue.
Cheers,
Meera -
ERROR Cannot create target (optional) element - SUPPRESS value
HI, XI/PI experts!
I am new in PI 7.1 (Ehp1 SP 7), previously work with PI 7.0.
I faced with problem of mapping optional target element, when queue has just SUPPRESS element. I expected to suppressing mapping of the target element, but mapping program raise exception:
Cannot create target element
/ns0:Messages/ns0:Message1/MT_DiadocMethods/ConnectInfo/TraceInfo/Folder.
Values missing in queue context.
Target XSD requires a value for this element, but the target-field mapping does not create one.
Check whether the XML instance is valid for the source XSD,
and whether the target-field mapping fulfils the requirement of the target XSD
XSD Folder declaration:
<xsd:element name="Folder" type="xsd:string" minOccurs="0">
<xsd:annotation>
<xsd:documentation>
u043Au0430u0442u0430u043Bu043Eu0433 u0434u043Bu044F u0442u0440u0430u0441u0438u0440u043Eu0432u043Au0438 u0447u0435u0440u0435u0437 u0444u0430u0439u043Bu044B
</xsd:documentation>
</xsd:annotation>
</xsd:element>
[http://imagepost.ru/?v=queue_for_optional_element_fol.PNG|http://imagepost.ru/?v=queue_for_optional_element_fol.PNG]
If put mapWithDeffault with value "hello" between ifWithoutElse and target element Folder, then exceptions not raised, but target element also not created
15:53:03 Start of test
Compilation of MM_Diadoc_DownloadNewEvents__DiadocMethods_q successful
Document start
Start tag [ns0:Messages]
Add raw attribute [ xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"]
Start tag [ns0:Message1]
Start tag [MT_DiadocMethods]
Start tag [ConnectInfo]
Start tag [trace_level]
Put value [4]
Close tag [trace_level]
Start tag [TraceInfo]
Start tag [TraceViaMail]
Close tag [TraceViaMail]
Close tag [TraceInfo]
Close tag [ConnectInfo]
Close tag [MT_DiadocMethods]
Close tag [ns0:Message1]
Close tag [ns0:Messages]
Document end
Execution of mapping on server took 1160 milliseconds Executed successfully
15:53:05 End of test
<Display Queue> show that queue after mapWithDeffault has <null> value:
[http://imagepost.ru/?v=mapwithdeffault.PNG|http://imagepost.ru/?v=mapwithdeffault.PNG]
Inserting mapWithDeffault is workaround for this situation, but I am interesting to understand principle of SUPPRESS in 7.1
Thanks in advance and sorry for my English !Hi,
To understand the Suppress you can refer the below blog
/people/stefan.grube/blog/2006/01/09/the-use-of-suppress-in-the-xi-30-graphical-mapping-tool -
EXCEPTION_DURING_EXECUTE and Cannot create target element ?
hi experts
i got error in jdbc to idoc scenario (PI 7.1 sp7)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_avabtis_to_ps_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ZENTITY. Values</SAP:P3>
<SAP:P4>missing in queue context. Target XSD requires a v~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_mm_avabtis_to_ps_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZENTITY. Valuesmissing in queue context. Target XSD requires a v~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
jdbc struc
jdbcdt->
row -->
comp
plant
dept
entype
entity
endesc
glcode
Idoc struc
zentity root--> (mapped to jdbcdt)
idoc
begin -
>( constant value 1)
edi_dc40---->(Disabled Total segment)
z1entity -
>(Mapped to Row)
segment -
>(Constant value 1)
comp
plant
dept
entype
entity
endesc
glcode
please help me out.Hi
-->In your IDOC do you have any other segments which are mandatory?Please do recheck your IDOC structure and check for the mandatory segments and assgin them with the constant value 1.
-->The error seems to be the mandatory segment value is not mapped.
Thanks -
Cannot create target element(Runtime exception occurred during application
Hi ,
this is IDOC TO HTTP Scenario. in error description it is shoein g below error.
Runtime exception occurred during application
Cannot create target element (inbound)
please advice
thank you.Copy the payload from sxmb_moni and test it in the mapping tool using debug mode. I suspect some mandatory elements in target structure requires value but it is missing during mapping. Sometime sender data structure due to values are not getting at runtime does not create target structure element. Check all the individual fields in the mapping tool.
-
How did i solve "Cannot create target element" but still having problems.
Hi Experts,
I solved my problem of "Cannot create target element" by removing of the data type structure the following fields :
DT_AS400_1 -> Complex Type
Payroll 1..1 (Should i put 0..0?)
-> Row 0..Unbounded And then Fields to be passed.
I can't figure how pi can't detect the fields, i use them pretty often.
Any Suggestions,
Thanks for your help,
Regards,
Steve.Hi Steve,
Check if input message, has the field that is producing the output.
Therefore, if you don't have any input to fill the structure root, you can fill it with an empty constant.
Best regards,
Pedro M. D. Pereira
Edited by: Pedro Pereira on Jun 10, 2010 1:26 AM -
Cannot create target element/ns1:MT_CONTRACT.Value missing in queue context
Hi Friends,
AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
that is csv file am trying to convert to xml. but am getting error "Cannot create target element /ns1:MT_CONTRACT. Value missing in queue context."
my data types is: MT_CONTRACT_SNDR MT_CONTRACT
SUB_ELEMENT: Recordset Recordset
SUB_ELEMENT: Item Item
SUB_ELEMENTS: AgrmntID AgrmntID
Company_Code Company_Code
Vendor_No Vendor_No
like this all the 18 elements under Item node. I kept Recordset occurance 0-1 and Item 0-Unbound and all 18subelements as 0-1 in both sender and receiver. And in content conversion:
Document Name: MT_CONTRACT_SNDR
Document Offset: 1
Recordset Structure: Item,*
Record Sequence: Asending
Recordsets per Massage: 1
Key Field Type: String (Case-Sensitive)
Item.fieldSeperator : ,
Item.endSeperator: 'nl'
Item.fieldNames: AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
KINDLY SUGGEST ME WHAT MISTAKE AM DOING. AM NEW TO SAP PII have this error in audit log. On searching I read that the error is connectivity problem between abap stack and java stack. but I made restart the server but error not cleared. can anyone of you suggest me to solve?
Audit Log for Message: 7c06ee0d-d70b-406f-07bc-f56228cc1d6a
Time Stamp Type Description
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:05:07 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:05:07 Information The message status was set to WAIT.
10.08.2011 18:05:07 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:10:07 IST 2011.
10.08.2011 18:10:07 Information The message status was set to TBDL.
10.08.2011 18:10:07 Information Retrying to deliver message to the application. Retry: 1
10.08.2011 18:10:07 Information The message was successfully retrieved from the receive queue.
10.08.2011 18:10:07 Information The message status was set to DLNG.
Time Stamp Type Description
10.08.2011 18:10:07 Information Delivering to channel: CC_Contrct_Recivr
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:08 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:10:08 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:10:08 Information The message status was set to WAIT.
10.08.2011 18:10:08 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:15:08 IST 2011. -
UDF required !! Cannot create target element Values missing in queue context
Dear Experts,
I am getting the cannot create target element error with acknowledgement payload in response message mapping in synchronous interface. I have shared the response payload2. Please suggest do I need write any UDF.
Message mapping successful with below payload1:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:updateOppResponse xmlns:ns0="http://soap.sforce.com/schemas/class/clientUpdateInqWebService">
<ns0:result>
<ns0:Description>Record Updated</ns0:Description>
<ns0:SFDCId>006M0000007xjTrIAI</ns0:SFDCId>
<ns0:Status>true</ns0:Status>
</ns0:result>
</ns0:updateOppResponse>
With the below target system response message, Mapping failing with Cannot create target element /ns1:MT_InquiryUpdate_ECC_Ack. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD com.sap.aii.mappingtool.tf7.IllegalInstanceException:
Actual acknowledgement reply from target system payload2:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns="http://soap.sforce.com/schemas/class/clientUpdateInqWebService" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<updateOppResponse>
<result>
<Description>Record Updated</Description>
<SFDCId>006M0000007xjTrIAI</SFDCId>
<Status>true</Status>
</result>
</updateOppResponse>
</soapenv:Body>
</soapenv:Envelope>
Regards
RKNHi
The easiest solution will be , write an simple java map for your response mapping.
Please provide your target structure , if you need any help on the java mapping.
Sample code:
Response message from web service
target msg:
java code:
package com.sap;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class populateResponseMessage extends AbstractTransformation {
public void transform(TransformationInput arg0, TransformationOutput arg1)
throws StreamTransformationException {
try {
DocumentBuilderFactory tfactory = DocumentBuilderFactory
.newInstance();
DocumentBuilder tbuilder = tfactory.newDocumentBuilder();
Document doc = tbuilder.parse(arg0.getInputPayload()
.getInputStream());
Document newdoc = tbuilder.newDocument();
Element root = (Element) newdoc.createElementNS(
"urn:sap-com:document:sap:rfc:functions",
"ns1:ZTEST_FAULT_MESSAGE_DATA.Response");
newdoc.appendChild(root);
NodeList nlList = doc.getElementsByTagName("ConversionRateResult");
if (nlList.getLength() != 0 && nlList != null) {
Node data = nlList.item(0);
String sourceval = data.getTextContent();
Element rate = (Element) newdoc.createElement("RATE");
rate.setTextContent(sourceval);
root.appendChild(rate);
Transformer transformer = TransformerFactory.newInstance()
.newTransformer();
Source source = new DOMSource(newdoc);
Result output = new StreamResult(arg1.getOutputPayload().getOutputStream());
transformer.transform(source, output);
} catch (Exception e) {
e.printStackTrace();
}// end of transform -
Cannot create target element /ns0 Values missing in queue context
Hi Sdn,
When I am testing the Message mapping in PI i am getting the below error message .
Cannot create target element /ns0:TechObjChange. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD See error logs for details
Could you please tel me what would be the wrong.
below is the XML file data .
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TechObjChange xmlns:ns0="http://schemas.xxxxx.com/iiiii/xxxxxx">
<TechObjChangeFLEQ>
<FormType/>
<FunctionalLocation/>
<Descoffunctionalloc/>
<Equipment/>
<DescofEquipment/>
<StartupDateofTechObj/>
<Manufacturer/>
<Manufacturermodelnumber/>
<Manufacturerpartnumber/>
<Manufacturerserialnumbe/>
<Countryofmanufacture/>
<Yearofconstruction/>
<Monthofconstruction/>
<TypeofTechObject/>
<PlannerGroup/>
<MainWorkCenter/>
<CatalogProfile/>
<NameofUserchangingtheobject/>
<Characteristic>
<CharacteristicName/>
<Characteristicvalue/>
</Characteristic>
<MeasuringPoint>
<MeasurementPosition/>
<Characteristic/>
<MeasurementPoint/>
<MeasuringPointAsIs/>
<MeasuringPointAsLeft/>
<PCTCodeGroupMP/>
<PCTCodeMP/>
</MeasuringPoint>
</TechObjChangeFLEQ>
</ns0:TechObjChange>WSDL structure
WSDL structure
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xxxxxxxx">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:p0="http://schemas.xxxxxxxxx" targetNamespace="http://schemas.xxxxxxxxxx">
<xsd:element name="TechObjChange">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TechObjChangeFLEQ">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FormType" type="xsd:string" minOccurs="0" />
<xsd:element name="FunctionalLocation" type="xsd:string" minOccurs="0" />
<xsd:element name="Descoffunctionalloc" type="xsd:string" minOccurs="0" />
<xsd:element name="Equipment" type="xsd:string" minOccurs="0" />
<xsd:element name="DescofEquipment" type="xsd:string" minOccurs="0" />
<xsd:element name="StartupDateofTechObj" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturer" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturermodelnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerpartnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerserialnumbe" type="xsd:string" minOccurs="0" />
<xsd:element name="Countryofmanufacture" type="xsd:string" minOccurs="0" />
<xsd:element name="Yearofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="Monthofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="TypeofTechObject" type="xsd:string" minOccurs="0" />
<xsd:element name="PlannerGroup" type="xsd:string" minOccurs="0" />
<xsd:element name="MainWorkCenter" type="xsd:string" minOccurs="0" />
<xsd:element name="CatalogProfile" type="xsd:string" minOccurs="0" />
<xsd:element name="NameofUserchangingtheobject" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CharacteristicName" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristicvalue" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MeasuringPoint" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="MeasurementPosition" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasurementPoint" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsIs" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsLeft" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeGroupMP" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeMP" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="TechObjChange">
<wsdl:part xmlns:p4="http://schemas.xxxxxxx" name="TechObjChange" element="p4:TechObjChange" />
</wsdl:message>
</wsdl:definitions> -
CAQuietExec: Error: Cannot create database.
Could not upgrade from Azure .NET SDK 2.2 to 2.3 (VS 2013) on Windows 8.1 x64. The Storage Emulator 3.0 setup is failing, even if launched manually. Do you have any tips?
The logs of the WindowsAzureStorageEmulator install has the following lines just before initiating a rollback.
MSI (s) (F4:D8) [08:18:27:340]: Source for file 'StartStorageEmulator.cmd' is compressed
InstallFiles: File: StartStorageEmulator.cmd, Directory: C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\, Size: 64
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CacheSizeFlush(,)
MSI (s) (F4:D8) [08:18:27:340]: Executing op: ActionStart(Name=RunInitialize,Description=Initializing the Storage Emulator,)
Action 8:18:27: RunInitialize. Initializing the Storage Emulator
MSI (s) (F4:D8) [08:18:27:340]: Executing op: CustomActionSchedule(Action=RunInitialize,ActionType=1025,Source=BinaryData,Target=CAQuietExec,CustomActionData="C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\WAStorageEmulator.exe"
init -forcecreate -autodetect)
MSI (s) (F4:F8) [08:18:27:371]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIEAC9.tmp, Entrypoint: CAQuietExec
MSI (s) (F4:C8) [08:18:27:371]: Generating random cookie.
MSI (s) (F4:C8) [08:18:27:371]: Created Custom Action Server with PID 3640 (0xE38).
MSI (s) (F4:48) [08:18:27:387]: Running as a service.
MSI (s) (F4:48) [08:18:27:387]: Hello, I'm your 32bit Impersonated custom action server.
CAQuietExec: Windows Azure Storage Emulator 3.0.0.0 command line tool
CAQuietExec: Error: Cannot create database.
CAQuietExec: Error 0xfffffff3: Command line returned an error.
CAQuietExec: Error 0xfffffff3: CAQuietExec Failed
CustomAction RunInitialize returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 8:18:32: InstallFinalize. Return value 3.
MSI (s) (F4:D8) [08:18:32:276]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (F4:D8) [08:18:32:276]: User policy value 'DisableRollback' is 0I agree. This (finally) took care of it! Thanks to DixQuinze and Trent Swanson...
sqllocaldb stop v11.0
sqllocaldb delete v11.0
delete C:\Users\MyAccount\WAStorageEmulatorDb30*.*
sqllocaldb create v11.0
Then try the install again!
-Dave
DixQuinze
0 -
Creating a target group based on the BP email address only in CRM
Hi there,
I am currently trying to create a target group based on the business partner email address only.
I have a list of over 1000 email addresses - these email addresses equate to a BP in our CRM system, however I do not have a list of the equivalent business partner numbers, all I have to work on are the email addresses. With these 1000 BP email addresses I need to update the marketing attributes of each of these 1000 BP records in CRM.
What I need is a method to find the 1000 BP numbers based on the email addresses and then use the marketing expert tool (tx. CRMD_MKT_TOOLS) to change the marketing attributes on all of the 1000 BPs.
The issue I am having is how can I find the list of BP numbers just based on the BP email address, I tried creating an infoset based on table BUT000, BUT020 and ADR6 but I after creating attribute list & data source for this I am stuck on what to do next. In the attribute list the selection criteria does not allow me to import a file for the selection range. I can only enter a value but I have 1000 email addresses and cannot possibly email them manually in the filter for the attribute list. I also looked at imported a file into the target group but I do not have any BP numbers so this will not work.
Does anyone know a method where I can create a target group based on the email addresses only without having to do any code?
Any help would be most appreciated.
Kind regard
JoJoHi JoJo ,
The below report will return you BP GUID from emails that is stored in a single column .xls file and assign the BP to a target group.
REPORT zexcel.
* G L O B A L D A T A D E C L A R A T I O N
TYPE-POOLS : ole2.
TYPES : BEGIN OF typ_xl_line,
email TYPE ad_smtpadr,
END OF typ_xl_line.
TYPES : typ_xl_tab TYPE TABLE OF typ_xl_line.
DATA : t_data TYPE typ_xl_tab,
lt_bu_guid TYPE TABLE OF bu_partner_guid,
ls_bu_guid TYPE bu_partner_guid,
lt_guids TYPE TABLE OF bapi1185_bp,
ls_guids TYPE bapi1185_bp,
lt_return TYPE bapiret2_t.
* S E L E C T I O N S C R E E N L A Y O U T
PARAMETERS : p_xfile TYPE localfile,
p_tgguid TYPE bapi1185_key .
* E V E N T - A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xfile.
CALL FUNCTION 'WS_FILENAME_GET'
IMPORTING
filename = p_xfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
CLEAR p_xfile.
ENDIF.
* E V E N T - S T A R T O F S E L E C T I O N
START-OF-SELECTION.
* Get data from Excel File
PERFORM sub_import_from_excel USING p_xfile
CHANGING t_data.
SELECT but000~partner_guid FROM but000 INNER JOIN but020 ON
but000~partner =
but020~partner
INNER JOIN adr6 ON but020~addrnumber = adr6~addrnumber INTO TABLE
lt_bu_guid FOR ALL ENTRIES IN t_data WHERE adr6~smtp_addr =
t_data-email.
CLEAR: lt_guids,ls_guids.
LOOP AT lt_bu_guid INTO ls_bu_guid.
ls_guids-bupartnerguid = ls_bu_guid.
APPEND ls_guids TO lt_guids.
ENDLOOP.
CALL FUNCTION 'BAPI_TARGETGROUP_ADD_BP'
EXPORTING
targetgroupguid = p_tgguid
TABLES
return = lt_return
businesspartner = lt_guids.
*& Form SUB_IMPORT_FROM_EXCEL
* text
* -->U_FILE text
* -->C_DATA text
FORM sub_import_from_excel USING u_file TYPE localfile
CHANGING c_data TYPE typ_xl_tab.
CONSTANTS : const_max_row TYPE sy-index VALUE '65536'.
DATA : l_dummy TYPE typ_xl_line,
cnt_cols TYPE i.
DATA : h_excel TYPE ole2_object,
h_wrkbk TYPE ole2_object,
h_cell TYPE ole2_object.
DATA : l_row TYPE sy-index,
l_col TYPE sy-index,
l_value TYPE string.
FIELD-SYMBOLS : <fs_dummy> TYPE ANY.
* Count the number of columns in the internal table.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE l_dummy TO <fs_dummy>.
IF sy-subrc EQ 0.
cnt_cols = sy-index.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Create Excel Application.
CREATE OBJECT h_excel 'Excel.Application'.
CHECK sy-subrc EQ 0.
* Get the Workbook object.
CALL METHOD OF h_excel 'Workbooks' = h_wrkbk.
CHECK sy-subrc EQ 0.
* Open the Workbook specified in the filepath.
CALL METHOD OF h_wrkbk 'Open' EXPORTING #1 = u_file.
CHECK sy-subrc EQ 0.
* For all the rows - Max upto 65536.
DO const_max_row TIMES.
CLEAR l_dummy.
l_row = l_row + 1.
* For all columns in the Internal table.
CLEAR l_col.
DO cnt_cols TIMES.
l_col = l_col + 1.
* Get the corresponding Cell Object.
CALL METHOD OF h_excel 'Cells' = h_cell
EXPORTING #1 = l_row
#2 = l_col.
CHECK sy-subrc EQ 0.
* Get the value of the Cell.
CLEAR l_value.
GET PROPERTY OF h_cell 'Value' = l_value.
CHECK sy-subrc EQ 0.
* Value Assigned ? pass to internal table.
CHECK NOT l_value IS INITIAL.
ASSIGN COMPONENT l_col OF STRUCTURE l_dummy TO <fs_dummy>.
<fs_dummy> = l_value.
ENDDO.
* Check if we have the Work Area populated.
IF NOT l_dummy IS INITIAL.
APPEND l_dummy TO c_data.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Now Free all handles.
FREE OBJECT h_cell.
FREE OBJECT h_wrkbk.
FREE OBJECT h_excel.
ENDFORM. " SUB_IMPORT_FROM_EXCEL
Just copy paste the code and run the report select any local xls file with emails and pass the target group guid.
snap shot of excel file:
Let me know if it was useful. -
[SOLVED] C Compiler Cannot Create Executables
I am aware that there is already a thread on this here however it failed to solve my issue. I have installed the multilib-devel packages as the referenced post suggested, but I still receive the following error message when attempting to compile wine-mono package either with makepkg or with yaourt.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-w64-mingw32
checking target system type... x86_64-w64-mingw32
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-w64-mingw32-strip... no
checking for strip... strip
configure: WARNING: using cross tools not prefixed with host triplet
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether ln -s works... yes
checking host platform characteristics... ok
checking for x86_64-w64-mingw32-gcc... no
checking for gcc... gcc
checking for x86_64-w64-mingw32-gcc... gcc
checking whether the C compiler works... no
configure: error: in `/tmp/yaourt-tmp-sensei/aur-wine-mono/src/wine-mono-0.0.4/build-cross-x86_64':
configure: error: C compiler cannot create executables
See `config.log' for more details
My config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by mono configure 2.11.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ../mono/configure --prefix=/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64-install --build=x86_64-unknown-linux-gnu --target=x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --with-tls=none --disable-mcs-build --enable-win32-dllmain=yes --with-libgc-threads=win32 PKG_CONFIG=false mono_cv_clang=no
## Platform. ##
hostname = archmage
uname -m = x86_64
uname -r = 3.3.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
PATH: /home/sensei/Documents/Scripts
## Core tests. ##
configure:2970: checking build system type
configure:2984: result: x86_64-unknown-linux-gnu
configure:3004: checking host system type
configure:3017: result: x86_64-w64-mingw32
configure:3037: checking target system type
configure:3050: result: x86_64-w64-mingw32
configure:3099: checking for a BSD-compatible install
configure:3167: result: /usr/bin/install -c
configure:3178: checking whether build environment is sane
configure:3233: result: yes
configure:3292: checking for x86_64-w64-mingw32-strip
configure:3322: result: no
configure:3332: checking for strip
configure:3348: found /usr/bin/strip
configure:3359: result: strip
configure:3371: WARNING: using cross tools not prefixed with host triplet
configure:3384: checking for a thread-safe mkdir -p
configure:3423: result: /bin/mkdir -p
configure:3430: checking for gawk
configure:3446: found /usr/bin/gawk
configure:3457: result: gawk
configure:3468: checking whether make sets $(MAKE)
configure:3490: result: yes
configure:3565: checking how to create a ustar tar archive
configure:3578: tar --version
tar (GNU tar) 1.26
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3581: $? = 0
configure:3621: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
configure:3624: $? = 0
configure:3628: tar -xf - <conftest.tar
configure:3631: $? = 0
configure:3644: result: gnutar
configure:3654: checking whether to enable maintainer-specific portions of Makefiles
configure:3663: result: no
configure:3680: checking whether ln -s works
configure:3684: result: yes
configure:3737: checking host platform characteristics
configure:4029: result: ok
configure:4090: checking for x86_64-w64-mingw32-gcc
configure:4120: result: no
configure:4130: checking for gcc
configure:4146: found /usr/bin/gcc
configure:4157: result: gcc
configure:4187: checking for x86_64-w64-mingw32-gcc
configure:4214: result: gcc
configure:4483: checking for C compiler version
configure:4492: gcc --version >&5
gcc (GCC) 4.7.0 20120505 (prerelease)
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4503: $? = 0
configure:4492: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.7-20120505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-multilib --disable-libssp --disable-build-with-cxx --disable-build-poststage1-with-cxx --enable-checking=release
Thread model: posix
gcc version 4.7.0 20120505 (prerelease) (GCC)
configure:4503: $? = 0
configure:4492: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4503: $? = 1
configure:4492: gcc -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:4503: $? = 1
configure:4523: checking whether the C compiler works
configure:4545: gcc -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DWINVER=0x0500 -D_WIN32_WINNT=0x0500 -D_WIN32_IE=0x0501 -D_UNICODE -DUNICODE -DWIN32_THREADS -DFD_SETSIZE=1024 -DGC_NOT_DLL -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -lmswsock -lws2_32 -lole32 -loleaut32 -lpsapi -lversion -ladvapi32 -lwinmm -lkernel32 conftest.c >&5
/usr/bin/ld: cannot find -lmswsock
/usr/bin/ld: cannot find -lws2_32
/usr/bin/ld: cannot find -lole32
/usr/bin/ld: cannot find -loleaut32
/usr/bin/ld: cannot find -lpsapi
/usr/bin/ld: cannot find -lversion
/usr/bin/ld: cannot find -ladvapi32
/usr/bin/ld: cannot find -lwinmm
/usr/bin/ld: cannot find -lkernel32
collect2: error: ld returned 1 exit status
configure:4549: $? = 1
configure:4587: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "mono"
| #define PACKAGE_TARNAME "mono"
| #define PACKAGE_VERSION "2.11.1"
| #define PACKAGE_STRING "mono 2.11.1"
| #define PACKAGE_BUGREPORT "http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono"
| #define PACKAGE_URL ""
| #define PACKAGE "mono"
| #define VERSION "2.11.1"
| #define HOST_WIN32 1
| #define DISABLE_PORTABILITY 1
| #define PLATFORM_NO_SYMLINKS 1
| #define TARGET_WIN32 1
| #define MINGW_CROSS_COMPILE 1
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:4592: error: in `/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64':
configure:4594: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-unknown-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-w64-mingw32
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=x86_64-w64-mingw32
ac_cv_host=x86_64-w64-mingw32
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=gcc
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_make_make_set=yes
ac_cv_target=x86_64-w64-mingw32
am_cv_prog_tar_ustar=gnutar
mono_cv_clang=no
## Output variables. ##
ACLOCAL='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run aclocal-1.12'
ALPHA_FALSE=''
ALPHA_TRUE=''
AMD64_FALSE=''
AMD64_TRUE=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
API_VER='2.0'
AR=''
ARM_FALSE=''
ARM_TRUE=''
AS=''
AUTOCONF='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run autoconf'
AUTOHEADER='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run autoheader'
AUTOMAKE='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run automake-1.12'
AWK='gawk'
BOEHM_DEFINES=''
BUILD_EXEEXT=''
BUILD_GLIB_CFLAGS=''
BUILD_GLIB_LIBS=''
BUILD_MCS_FALSE=''
BUILD_MCS_TRUE=''
CC='gcc'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CC_FOR_BUILD=''
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CFLAGS_FOR_BUILD=''
CPP=''
CPPFLAGS=' -DWINVER=0x0500 -D_WIN32_WINNT=0x0500 -D_WIN32_IE=0x0501 -D_UNICODE -DUNICODE -DWIN32_THREADS -DFD_SETSIZE=1024 -DGC_NOT_DLL'
CROSS_COMPILING_FALSE=''
CROSS_COMPILING_TRUE=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DISABLE_EXECUTABLES_FALSE=''
DISABLE_EXECUTABLES_TRUE=''
DISABLE_JIT_FALSE=''
DISABLE_JIT_TRUE=''
DISABLE_PROFILER_FALSE=''
DISABLE_PROFILER_TRUE=''
DISABLE_SHARED_HANDLES=''
DLLTOOL=''
DOLT_BASH=''
DSYMUTIL=''
DTRACE=''
DTRACEFLAGS=''
DTRACE_G_REQUIRED_FALSE=''
DTRACE_G_REQUIRED_TRUE=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DTRACE_FALSE=''
ENABLE_DTRACE_TRUE=''
ENABLE_LLVM_FALSE=''
ENABLE_LLVM_TRUE=''
ENABLE_NUNIT_TESTS_FALSE=''
ENABLE_NUNIT_TESTS_TRUE=''
EXEEXT=''
FGREP=''
GETTEXT_MACRO_VERSION=''
GLIB_CFLAGS=''
GLIB_LIBS=''
GMODULE_CFLAGS=''
GMODULE_LIBS=''
GMSGFMT=''
GMSGFMT_015=''
GREP=''
HAVE_MSGFMT=''
HAVE_OPROFILE_FALSE=''
HAVE_OPROFILE_TRUE=''
HAVE_ZLIB_FALSE=''
HAVE_ZLIB_TRUE=''
HOST_CC='gcc'
HOST_WIN32_FALSE='#'
HOST_WIN32_TRUE=''
HPPA_FALSE=''
HPPA_TRUE=''
IA64_FALSE=''
IA64_TRUE=''
INCLUDED_LIBGC_FALSE=''
INCLUDED_LIBGC_TRUE=''
INSTALL_4_0_FALSE=''
INSTALL_4_0_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_MOBILE_FALSE=''
INSTALL_MOBILE_TRUE=''
INSTALL_MONODROID_FALSE=''
INSTALL_MONODROID_TRUE=''
INSTALL_MONOTOUCH_FALSE=''
INSTALL_MONOTOUCH_TRUE=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INTERP_SUPPORTED_FALSE=''
INTERP_SUPPORTED_TRUE=''
INTL=''
JIT_SUPPORTED_FALSE=''
JIT_SUPPORTED_TRUE=''
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -lmswsock -lws2_32 -lole32 -loleaut32 -lpsapi -lversion -ladvapi32 -lwinmm -lkernel32'
LIBC=''
LIBGC_CPPFLAGS=''
LIBGC_LIBS=''
LIBGC_STATIC_LIBS=''
LIBICONV=''
LIBMONO_LA=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LLVM_CFLAGS=''
LLVM_CONFIG=''
LLVM_CXXFLAGS=''
LLVM_LDFLAGS=''
LLVM_LIBS=''
LN_S='cp'
LOADED_LLVM_FALSE=''
LOADED_LLVM_TRUE=''
LTCOMPILE=''
LTCXXCOMPILE=''
LTLIBICONV=''
LTLIBOBJS=''
M68K_FALSE=''
M68K_TRUE=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/missing --run makeinfo'
MANIFEST_TOOL=''
MIPS_FALSE=''
MIPS_GCC_FALSE=''
MIPS_GCC_TRUE=''
MIPS_SGI_FALSE=''
MIPS_SGI_TRUE=''
MIPS_TRUE=''
MKDIR_P='/bin/mkdir -p'
MONO_DEBUGGER_SUPPORTED_FALSE=''
MONO_DEBUGGER_SUPPORTED_TRUE=''
MONO_DL_NEED_USCORE=''
MONO_NACL_ALIGN_MASK_OFF=''
MOONLIGHT_BOEHM_FALSE=''
MOONLIGHT_BOEHM_TRUE=''
MOONLIGHT_DEFINES=''
MOONLIGHT_FALSE=''
MOONLIGHT_SGEN_FALSE=''
MOONLIGHT_SGEN_TRUE=''
MOONLIGHT_TRUE=''
MSGFMT=''
MSGFMT_015=''
MSGMERGE=''
NACL_CODEGEN_FALSE=''
NACL_CODEGEN_TRUE=''
NM=''
NMEDIT=''
NO_VERSION_SCRIPT_FALSE=''
NO_VERSION_SCRIPT_TRUE=''
OBJDUMP=''
OBJEXT=''
ONLY_MOONLIGHT_FALSE=''
ONLY_MOONLIGHT_TRUE=''
OPROFILE_CFLAGS=''
OPROFILE_LIBS=''
OTOOL64=''
OTOOL=''
PACKAGE='mono'
PACKAGE_BUGREPORT='http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono'
PACKAGE_NAME='mono'
PACKAGE_STRING='mono 2.11.1'
PACKAGE_TARNAME='mono'
PACKAGE_URL=''
PACKAGE_VERSION='2.11.1'
PATH_SEPARATOR=':'
PKG_CONFIG='false'
PLATFORM_ANDROID_FALSE=''
PLATFORM_ANDROID_TRUE='#'
PLATFORM_DARWIN_FALSE=''
PLATFORM_DARWIN_TRUE='#'
PLATFORM_LINUX_FALSE=''
PLATFORM_LINUX_TRUE='#'
PLATFORM_SIGPOSIX_FALSE=''
PLATFORM_SIGPOSIX_TRUE='#'
POWERPC64_FALSE=''
POWERPC64_TRUE=''
POWERPC_FALSE=''
POWERPC_TRUE=''
RANLIB=''
S390_FALSE=''
S390_TRUE=''
S390x_FALSE=''
S390x_TRUE=''
SED=''
SET_MAKE=''
SGEN_DEFINES=''
SHARED_MONO_FALSE=''
SHARED_MONO_TRUE=''
SHELL='/bin/sh'
SPARC64_FALSE=''
SPARC64_TRUE=''
SPARC_FALSE=''
SPARC_TRUE=''
SQLITE3=''
SQLITE=''
STATIC_MONO_FALSE=''
STATIC_MONO_TRUE=''
STRIP='strip'
SUPPORT_BOEHM_FALSE=''
SUPPORT_BOEHM_TRUE=''
SUPPORT_SGEN_FALSE=''
SUPPORT_SGEN_TRUE=''
TARGET_WIN32_FALSE='#'
TARGET_WIN32_TRUE=''
USE_BATCH_FILES_FALSE=''
USE_BATCH_FILES_TRUE=''
USE_JIT_FALSE=''
USE_JIT_TRUE=''
USE_NLS=''
VERSION='2.11.1'
X11=''
X86_FALSE=''
X86_TRUE=''
XATTR_LIB=''
XGETTEXT=''
XGETTEXT_015=''
XGETTEXT_EXTRA_OPTIONS=''
XMKMF=''
ac_ct_AR=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='tar --format=ustar -chf - "$$tardir"'
am__untar='tar -xf -'
arch_target=''
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias='x86_64-unknown-linux-gnu'
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
docs_dir=''
dvidir='${docdir}'
exec_prefix='NONE'
export_ldflags=''
host='x86_64-w64-mingw32'
host_alias='x86_64-w64-mingw32'
host_cpu='x86_64'
host_os='mingw32'
host_vendor='w64'
htmldir='${docdir}'
ikvm_native_dir=''
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/mono/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
libgc_dir=''
libgdiplus_loc=''
libmono_cflags='-mno-cygwin -mms-bitfields -mwindows'
libmono_ldflags='-mno-cygwin -mms-bitfields -mwindows'
libsuffix=''
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mcs_topdir=''
mcs_topdir_from_srcdir=''
mkdir_p=''
mono_build_root=''
mono_cfg_dir=''
mono_runtime=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/sensei/Downloads/Builds/wine-mono/src/wine-mono-0.0.4/build-cross-x86_64-install'
program_transform_name='s&^&x86_64-w64-mingw32-&'
psdir='${docdir}'
reloc_libdir='lib'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='x86_64-w64-mingw32'
target_alias='x86_64-w64-mingw32'
target_cpu='x86_64'
target_os='mingw32'
target_vendor='w64'
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "mono"
#define PACKAGE_TARNAME "mono"
#define PACKAGE_VERSION "2.11.1"
#define PACKAGE_STRING "mono 2.11.1"
#define PACKAGE_BUGREPORT "http://bugzilla.xamarin.com/enter_bug.cgi?classification=Mono"
#define PACKAGE_URL ""
#define PACKAGE "mono"
#define VERSION "2.11.1"
#define HOST_WIN32 1
#define DISABLE_PORTABILITY 1
#define PLATFORM_NO_SYMLINKS 1
#define TARGET_WIN32 1
#define MINGW_CROSS_COMPILE 1
configure: exit 77
My makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
#DLAGENTS=('ftp::/usr/bin/wget -4 -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
# 'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
# 'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
#Curl as default DLAGENT
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
I am running a x64 arch with multilib and multilib-testing enabled. This is the first time I have encountered this error. Thank you in advance for all advice and suggestions.
Edited: added makepkg.conf
Last edited by mynameisneo (2012-06-13 19:04:09)In your config.log:
/usr/bin/ld: cannot find -lmswsock
/usr/bin/ld: cannot find -lws2_32
/usr/bin/ld: cannot find -lole32
/usr/bin/ld: cannot find -loleaut32
/usr/bin/ld: cannot find -lpsapi
/usr/bin/ld: cannot find -lversion
/usr/bin/ld: cannot find -ladvapi32
/usr/bin/ld: cannot find -lwinmm
/usr/bin/ld: cannot find -lkernel32
Try find these files which package provides!
Edit: maybe package 'wine' provides this but as I see these libs are in /usr/lib/wine.
Last edited by uzsolt (2012-06-13 18:07:08) -
I'm running Mac OS 10.4.11 on a 1.6 GHz PowerPC G5 Mac. I uninstalled Firefox 3.6 from my according to directions on the Mozilla website. And I deleted my Firefox profile folder contained in the Home> Library> Application Support folder. Every time I attempt a clean install of Firefox 3.6.13.dmg, I get the following message: "Cannot create file."
This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies -
[SOLVED]C compiler cannot create executables DUE TO MISSING DEV. PACKS
Hi there, I was trying to build "lib32-libpcap" from AUR using yaourt when the gcc(?) reported an error as following:
==> Starting build()...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc -m32
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
==> ERROR: A failure occurred in build().
Aborting...
The content of the "config.log" file:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --enable-ipv6
## Platform. ##
hostname = mzws
uname -m = x86_64
uname -r = 3.2.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1794: checking build system type
configure:1812: result: x86_64-unknown-linux-gnu
configure:1834: checking host system type
configure:1849: result: x86_64-unknown-linux-gnu
configure:1871: checking target system type
configure:1886: result: x86_64-unknown-linux-gnu
configure:2036: checking for gcc
configure:2063: result: gcc -m32
configure:2301: checking for C compiler version
configure:2308: gcc -m32 --version >&5
gcc (GCC) 4.6.2 20120120 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2311: $? = 0
configure:2318: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20120120/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libssp --enable-checking=release
Thread model: posix
gcc version 4.6.2 20120120 (prerelease) (GCC)
configure:2321: $? = 0
configure:2328: gcc -m32 -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2331: $? = 1
configure:2354: checking for C compiler default output file name
configure:2381: gcc -m32 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/../../../libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
configure:2384: $? = 1
configure:2422: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2429: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_target=x86_64-unknown-linux-gnu
## Output variables. ##
ADDLARCHIVEOBJS=''
ADDLOBJS=''
BT_SRC=''
CAN_SRC=''
CC='gcc -m32'
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
DEFS=''
DYEXT=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GREP=''
HAVE_LINUX_TPACKET_AUXDATA=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAN_FILE_FORMATS=''
MAN_MISC_INFO=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_SUPPORT_BT=''
PCAP_SUPPORT_CAN=''
PCAP_SUPPORT_USB=''
RANLIB=''
SHELL='/bin/sh'
SHLICC2=''
SSRC=''
USB_SRC=''
V_CCOPT='-O'
V_DEFS=''
V_FINDALLDEVS=''
V_INCLS=''
V_LEX=''
V_PCAP=''
V_RPATH_OPT=''
V_SHLIB_CMD=''
V_SHLIB_OPT=''
V_SONAME_OPT=''
V_YACC=''
ac_ct_CC='gcc -m32'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
## confdefs.h. ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
configure: exit 77
and the makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Am running a up-to-date x64 Arch with [multilib] enabled; perhaps it's a silly mistake I made somewhere but I'm no dev and so cannot figure out what went wrong in the config.log....please help with your kindness and thanks in advance!
Last edited by karbon (2012-03-10 04:28:58)Thanks for your replies:)
Allan wrote:Are you really up-to-date? gcc-4.6.3 was put in [core] four days ago but you still seem to have 4.6.2.
Well...at least as up-to-date as on March 2nd(when I did last system-wide upgrade); trying to update system tonight to see whether this works.
stronnag wrote:If you have multilib and testing enabled, you also need multilib-testing, otherwise (as I know from bitter experience), you get these hard to track down errors.
Nope I didn't enable [testing]; I've discovered some packages in [multilib], namely gcc-multilib or something similar(with the -multilib subfix) and some of these packages belong to the group "multilib-devel". Is installing these packages a must for compiling 32-bit packages?
Maybe you are looking for
-
Problem passing parameter to crystal report subreport from *.aspx page
Background: I am developing a .NET web application using Visual Studio 2005. The code behind is in VB.net. One of my asp.net pages calls a report, which is invoked when the user clicks a Print button. I have developed this report using the Crystal Re
-
I cannot view this beach webcam but others can?
Hi, I'm a noob to mac's. I want to view this webcam http://www.mamasbeachcam.com/ I go onto the page and i get to this stage (see pic hopefully) It stays at this stage and never loads. I have a friends in the house that have macs and can view it no p
-
How to remove text from photo only one layer?
How do I remove text from this photo? plz & ty o I remove text from a photo?
-
Hi I change my Radius from MS IAS to MS NPS. The wired 802.1x works fine but the wireless 802.1x doesent work. AP1250's radius debug is attached. Obs: On IAS everything works fine
-
IWeb SEO Tool 1.9.1
I published my site through iWeb SEO Tool and now can't publish through iWeb, please could someone help me resolve this.