Cannot DNS resolve across networks using host name only (not fqdn)

Evening all,
 I currently run domain network (MS Server 08 - dhcp) on my firewall interface1 and WiFi network on interface2 (dhcp provided by router itself). On my Wifi dhcp I am advertising as DNS server that of the domain, but wifi clients can resolve only FQDN domain
client names not host names ("domainclient.domain.local" - not "domainclient").
If on my wifi client I change NIC properties -> IPV4->Advance->DNS-> append these suffixes, and put the domain.local, then it works but need to be able to work without manual changes to each client.
Any ideas?
Many thanks,
Argyris

Hi,
Additional, please confirm your DHCP option have configure the correct WINS server.
The related KB:
Understanding DNS Client Settings
http://technet.microsoft.com/en-us/library/cc754152.aspx
Configuring TCP/IP networking
http://msdn.microsoft.com/en-us/library/dd163570.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • My iMac can not see my mini Mac via Airport extreme using host name, only via IP address. What am I doing wrong ?

    I have an iMac and a mini Mac attached to the same Airport extreme. It would appear that Bonjour works because I can see the hostname of the mini Mac server in Finder on the iMac.
    But if I type in the host name (myminimac.private) in the Safari browser at the iMac it can not find the mini mac. However if I type in the IP address of the mini mac server it can see the see it.
    It used to work but I must have done something to mess it up.
    Anybody any suggestions ?

    You have the wrong card. You need the original AirPort card for your G4.
    ...how the **** do i get the Superdrive to open up so i can put in a CD/DVD?
    If the keyboard has a media eject key, press that. If not, hold down F12.

  • X11vnc: cannot use host name in Windows

    Hi, i cannot find my host name if i start x11vnc. It works if i write on Windows XP "Real VNC Viewer" IP adress. When i start x11vnc
    The VNC desktop is: asus:0
    But if i write to Real VNC Viewer "asus" or "asus:5900", it doesn't work but if i write "192.168.1.101" it works fine. I need find how i can use host name, because i have DHCP on router and IP address will be different. Please help, thanks

    Well, that's to be expected with standard plastic routers, or can you ping your XP box by name, for example?
    Look in your router interface if you can specify DHCP leases with fixed IPs, depending on MAC address.
    And then specify hostnames for those IPs in /etc/hosts and c:\windows\system32\drivers\etc\hosts

  • What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

    I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
    I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
    THANKS

    Hello Paneesh,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Resolved IP address from host name-PL\SQL

    Guys,
    I need to get a resolved IP address from Host name.
    ie:Input would be host name and I need to get the resolved IP address of the host as output .
    Can this be done by a PL\SQL program?
    Thoughts please.
    Thanks,
    Gabriel

    SQL> select utl_inaddr.get_host_address('www.oracle.com') from dual ;
    UTL_INADDR.GET_HOST_ADDRESS('WWW.ORACLE.COM')
    141.146.8.66
    1 row selected.
    SQL> select utl_inaddr.get_host_address('www.microsoft.com') from dual ;
    UTL_INADDR.GET_HOST_ADDRESS('WWW.MICROSOFT.COM')
    207.46.199.30
    1 row selected.
    SQL>

  • Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

    I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
    Very frustrated!!!

    It's downloading with Firefox 3.6.27 as I write.  It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions.  Or mybe just try again in a while as I suspect everybody is downloading right now.

  • HT3867 automatically connect to known networks using wi fi is NOT working

    "automatically connect to known networks" using wi fi is NOT working. Please can any one help

    Hi jvichatt,
    Welcome to Apple Support Communities.
    You may find some of the steps in this article helpful for troubleshooting your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best,
    Jeremy

  • Webpage using host name without domain

    Installed 10g successfully but when I try to naviagte the url is only using the computer host name without the domain. I keep getting the DNS_ERROR. If I manually append the domain in the webpage it works.
    Installed on Solaris 10.

    I doubt this has anything to do with Lion Server. it sounds more like the client settings.
    Did you add your domain to the list of search domains (System Preferences -> Network -> Advanced -> DNS).
    This list is the list of domains the client will search when looking up a unqualified hostname. Add your domain to this list.

  • Resolving an IP from Host Name

    I'm trying to resolve IP address from our printers on our LAN. When I pass the host name to the following method I receive an UnknownHostException.
    public String getAddress(String name)throws UnknownHostException{     InetAddress ia = InetAddress.getByName(name);
         return ia.toString();                    
    Note this is a large domain based network.
    Thanks.

    Hi catabej,
    Could you tell me what version of Office 365 are you using? If you have product key to activate it. Or you can activate Office 365 on phone, choose the telephone option in the Activation Wizard to get the phone number to contact in
    your country.
    Some reference about activating Office 365:
    https://support.office.com/en-US/Article/Activate-your-product-key-for-Office-365-for-business-afa5dee4-091d-4152-b849-6aef8463ca9c?ui=en-US&rs=en-US&ad=US
    https://support.office.com/en-US/Article/Activate-Office-2013-Office-365-Home-or-Office-365-Personal-1144e0de-e849-496e-8e33-ed6fb1b34202?ui=en-US&rs=en-US&ad=US
    If there is anything else that I can do for you regarding this issue, feel free to post back.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Configure Mail to use host name

    Hi,
    I'm trying to configure Mail on a Mac Mini Server. My problem is that I can't get the from email address to show correctly. The host name is demo.company.com, however email arrives with appleserver2.local (domain name). I've setup two accounts - administrator and user. When I send email from administrator to user it shows as coming form [email protected] - what I want it to show is [email protected]?
    I found an article (http://serverfault.com/questions/55342/change-email-domain-os-x-server) which seemed to ask the same question. The accepted answer made some changes to the main.cf file:
    myorigin = $mydomain
    mydestination = $myhostname localhost.$mydomain localhost $mydomain
    After I made the changes I restarted the Mail service, but it didn't solve my problem. I even rebooted the server but no change.
    Also, am I correct in thinking that a user's email address is configured using the Workgroup Manager under the Info tab?
    Mark

    I cannot recommend this, as I am not sure all the intergrations with other apps and databases would work properly, but see:
    http://hintsforums.macworld.com/showthread.php?t=108443
    Are you sure this is worth it?  My Mail folder is a long term archive, and I don't delete many messages.  Yet it is less than 20 GB.  Sounds like other apps and databases will overtake your space savings quickly.
    Ernie

  • Cannot have functions across tables if table name includes dot (.)

    It appears that table names must not include a dot (.) or else functions that take arguments from several tables do not work (e.g., compute the sum of several values form different tables). To be precise, they do work if the functions were inserted using a the previous version of Numbers. New or old but edited functions do not work.
    Is anyone else seeing this problem?

    As in French or Italien, comma (,) is the decimal separator in German (and the dot separates thousand). The commas do not cause these problems, just dots (.).
    However, your mentioning the simple quotes gets us one step further: With French, Italian or German number format these simple quotes are added automatically when characters such as comma or minus sign are part of the table name. They are not added when dots are part of the table name.
    When I add the single quotes manually, then the cross-table formula works - once. However, when I edit the formula the single quotes are magically removed, causing the error to occur again.
    So far, it seems as if the dot is not taken care of at least with French, German and Italian as the number format. I have not tried any other languages.

  • Fully Qualified Host Name does not work

    Hello,
    I've EP 7 with Usage Types AS Java, EPC, EP, BI Java, BP-ERP & XSS.
    I am using fully qualified hostname by means of making entries in hosts file at OS level. I've also set icm/host_name_full parameter correctly.
    Now when I enter URL as http://<fully qualified hostname>:<port>/irj/portal I am able to login to the system but after which if I try to navigate through any links under Employee Self-Service and Manager Self-Service for e.g. Employee Self-Service --> Benifits and Payment --> Request Claims, nothing happens. neither it throws any error nor does any page is displayed.
    Same thing when I try without using fully qualified hostname like http://<hostname>:<port>/irj/portal it works absolutely fine.
    I have done same settings as described above on my development as well as production system where it works absolutely fine with fully qualified hostname.
    Regards,
    Kashyap

    Hi
    if you are using proxy try adding your domain name in your proxy exceptions list
    Internet Options ->Connections ->Lan Settings->Proxy Server ->Advanced->Exceptions . try adding your host name to that list
    hope it will work.
    Jo

  • 9iasr2 infrastructure install - host name can not start with a digit?

    Hi,
    During the installation of the infrastructure the installer builds the database domain by using the host name. If the host name starts with the digit as in our case the installer fails with a blessing 'Database domain name should start with a letter'. How can we workaround the problem?
    Thank you.
    Anatoliy Smirnov

    Chris,
    Thank you for your reply. I looked at this thread before I posted my question, but I could not find an answer to what is wrong with this line in the hosts file:
    10.0.0.80 7xpsm01.us.oracle.com 7xpsm01
    or
    10.0.0.80 7xpsm01 7xpsm01.us.oracle.com
    If you know what the problem was in your case could you please let me know? Appreciate your time.
    Thank you.
    Anatoliy

  • IBooks is using "Sort Name" and not "Name". How do I fix this?

    I need help.
    I have sorted through all my ebooks, changing them to epub, editing metadata to have correct title, author, and even series (title and order) using a program called Calibre.
    When I sent these to my iTunes-iBooks it chooses to sort them by Sort Name (not the Name, but an entirely different field). I was able to mass delete Sort Artist, but not Sort Name. It is currently putting the series information in as Sort Name.
    As you can reasonably understand, I want to KEEP the series information as part of the metadata, but not have iTunes sorted by this, as it makes it impossible to find books by the title or "Name" of the book.
    Is there any way to force iTunes and iBooks to sort by Name only?
    Is there a way to delete Sort Name information without losing Series information as a part of the data?
    Additionally, I have close to 400 ebooks- I REALLY don't want to have to manually delete the Sort Name from each of these and honestly I'm afraid to lose the series data which took forever to input correctly.
    Off-topic: Can we just mention how so much could be solved if iTunes didn't treat books as if they were tracks of a CD? It's an Author not an Artist, they could include handy fields for Series rather than putting it in Sort Name, etc. I love the compatability between all my devices, but iTunes really should beef up their love for readers.

    Well the idea of the sort fields in general is that you use them to get fine grained control over the sort order rather than tweaking the main field to an incorrect value. iTunes has a built in mechanism for auto-sorting values that omits a leading article (a, an, or the) such that The Beatles will normally sort automatically under B. Given that mechanism exists there is usually no need to place anything in the sort field at all, but if it is there then manual edits to the main field won't change the sort order.
    You should be able to clear the current values using my script ClearSortName. Test the behaviour on a small group first to make sure it does what you want. Rather than having empty values I use the Sort Name field to actively group and order series so, for example, my Jo Nesbø books are kept together, and in the correct order, but retain their original titles. And I use sort artist/album/composer(author) to place the authors in the correct order by surname.
    tt2

  • How to setup the guest network just access internet only (not touch in internal server)

    I had setup the AirPort Extreme in basic and guest network, but observed the guest can access to our server currently, for the security issue, we can setup the guest network to access internet only? pleae advice and thanks

    By default, a properly configured Guest network on the AirPort Extreme only allows network clients to access the Internet. No access to the "main" network's resources should be available.
    This is assuming that the AirPort Extreme is the only or "main" router in your current network configuration.

Maybe you are looking for