Cannot enter data into table with column named DATE

I have a table as follows:
CREATE TABLE PACKINGLINE (
SNO VARCHAR2(13),
"DATE" DATE DEFAULT SYSDATE,
PRDORDNO VARCHAR2(12),
NOW DATE DEFAULT SYSDATE,
CONSTRAINT PACKINGLINE_PK PRIMARY KEY ("SNO", "DATE"));
Note the "cleaverly" named DATE and NOW columns (yes, that is the name of the column... our company was bessed with a very clear SQL server DBA in the past)
This SQL statement works:
INSERT INTO PACKINGLINE (SNO, PRDORDNO) VALUES ('1000808972', '100080897');
However when I try use SQL Developer as follows I cannot enter data:
1. Open SQL Developer
2. Click on "Tables" then on my table named PACKINGLINE
3. Click the "Data" tab
4. Click the [+] "Insert Row" Icon
5. Enter the same data as above
6. Click Commit
7. The following error is shown in the log window and I cannot commit the data change.
Error message
==================
INSERT INTO "DBO"."PACKINGLINE" (SNO, PRDORDNO) VALUES ('1000808971', '100080897')
One error saving changes to table "DBO"."PACKINGLINE":
Row 5: ORA-06550: Row 1、Column 25:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: Row 1、Column 7:
PL/SQL: SQL Statement ignored
==================
I can copy and paste the above query into a normal SQL statement window and the data commits fine.

Its so flaky there really must be something wrong Mr Adobe support person....
If I load a PDF, do nothing, gently save it, reopen and then waiting for my trial dialogue to wake up so that I can click on continue trial... then save as extended reader blah.... then close. I have finally saved one that works!!!! but how difficult is that????
WHAT IS WRONG ADOBE??

Similar Messages

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

Loading Data into Table with Complex Transformations

Hello Guys
I am trying to load data into one of the Dimension table and it has quite a few Transformations and i created 6 temp tables
1. It has 7 Columns , Gets 935 rows based on where condition
2. It has 10 Columns , Gets 935 rows with but it has nulls in it i.e for column 1 there are 500 fields and columns 2 there are 300 etc ...
3 , 4 , 5 , 6 all the same as the 2 table
and at the end when i am trying to join all the temp tables with the Product_id into the target , which is in each temp table ...
I am Getting Error Saying Not Obeying Primary key Constraints i.e unique values are not been inserting into the Product_id Column of Target Table and the Job is running for Hours
and the main Problem comes at , some of the Columns have the same Product_id
Please help me
I have been Trying for 1 week and i am in Full pressure
Thanks
Sriks
Edited by: Sriks on Oct 16, 2008 6:43 PM

Hi,
If you are creating a warehouse and product_key is ur PK then it should come only once and so u might have to think ur logic in getting the data. To get over the isue u can disable the constraint and load with out the cosntraint, but i would have u look at the logic and make sure u have only 1 product_key in the table.
Regards
Bharath

Importing data into tables with grant access (sql developer 3.2)

Hello,
I want to import data into a table PAY_BALANCE_BATCH_LINES which is an interface table. I'm logged in to a schema (APPS) and this table belongs to the HR schema. However, if you look at the grants, the APPS schema has all access to this particular table. In TOAD, this used to work great.
But in sqldeveloper, when I filter the tables dropdown, I am not able to find this table. Since this is my primary way of uploading data I'm not sure how else I can get access to upload data into this table. I don't know the password for the HR schema by the way.
Is there a way out?
Many Thanks

Scroll down the tree to the 'Other Users' node, expand it, and then drill down into HR > Tables. Then do your import.
For an alternative browser, right-click on your connection in the tree and open a Schema Browser.

Loading data into table with filename

Hi All,
I am new to ODI. I have a requirement to load of a flat file into oracle, along with the name of file in one column of the table. That means, if there are 10 rows of data from that file then the additional column 'FileName" of the table will have current file name written 10 times. Please suggest how this can be achieved. I am able to do half of it but file name is not populated.
Thanks.

Hi ,
Probably what you can do is
1. create a variable to read the file name . Refer http://odiexperts.com/?tag=file-variable-odi for creating such a variable.
2. Now in your interface , target table column which holds the filename , use '#<variable created in step 1>'
and specify it to be executed on target .
It should do the trick .
Thanks,
Sutirtha

Form Problem - Cannot enter decimals into a number column through portal?

Has anyone come accross this problem? Is it a bug? Can anyone offer any advice? It works using toad to enter data

Hi
I tried the same with the default form created from the wizard based on the table SCOTT.EMP .
It contains the field SAL with datatype NUMBER(7,2).
I was able to enter the decimal values and it worked perfectly fine.
Did you specify the precision and scale of the number datatype properly ?
NUMBER(precision,scale)
precision - the total number of digits
scale - number of digits to the right of the decimal point.
Thanks
Shivank

How to insert more than 32k xml data into oracle clob column

how to insert more than 32k xml data into oracle clob column.
xml data is coming from java front end
if we cannot use clob than what are the different options available

Are you facing any issue with my code?
String lateral size error will come when you try to insert the full xml in string format.
public static boolean writeCLOBData(String tableName, String id, String columnName, String strContents) throws DataAccessException{
boolean isUpdated = true;
Connection connection = null;
try {
connection = ConnectionManager.getConnection ();
//connection.setAutoCommit ( false );
PreparedStatement PREPARE_STATEMENT = null;
String sqlQuery = "UPDATE " + tableName + " SET " + columnName + " = ? WHERE ID =" + id;
PREPARE_STATEMENT = connection.prepareStatement ( sqlQuery );
// converting string to reader stream
Reader reader = new StringReader ( strContents );
PREPARE_STATEMENT.setClob ( 1, reader );
// return false after updating the clob data to DB
isUpdated = PREPARE_STATEMENT.execute ();
PREPARE_STATEMENT.close ();
} catch ( SQLException e ) {
e.printStackTrace ();
finally{
return isUpdated;
Try this JAVA code.

Ability to Import Spreadsheet Data into Table in Apps added Anytime Soon??

I love HTMLDB so much, and I thought I would never find anything it couldn't do, but I have run headlong into a problem that I've discovered many users have.
The Import Spreadsheet Data into Table functionality available in Data Workshop is such a treasure, and I was hoping with all of my heart that such functionality would be available for use inside the User Applications in HTMLDB 2.0. Alas, it is not so.
I know some brave folks have come up with work-arounds for this lack, and I applaud them. However, none of those will work for the situation I am faced with. I am about to strike out into the no-man's-land of trying to create my own PL/SQL csv file parsing function. Please wish me luck. Also, could you please tell me if this functionality is going to be included anytime soon?

Well I looked at the FLOWS_020000.WWV_FLOW_LOAD_DATA.LOAD_CSV_DATA procedure
From what I can gather(considering nobody cant look at the actual procedural code):
P_FILE_ID seems to be file id you find in FLOWS_FILES.WWV_FLOW_FILE_OBJECTS$
P_CNAMES seems to be the column names of table you are loading into
P_UPLOAD seems to be the names of field from file you are loading
P_SCHEMA seems to be the schema that contains table where data will be loaded
P_TABLE seems to be table that you load data into
P_DATA_TYPE seems to be the datatypes from file to be loaded
P_DATA_FORMAT not sure
P_PARSED_DATA_FORMAT not sure
P_SEPARATOR seems to be the field seperator from file
P_ENCLOSED_BY seems to be what fields will be enclosed with
P_FIRST_ROW_IS_COL_NAME seems to be to tell whether or not first row contains column headings
P_LOAD_TO not sure
P_CURRENCY seems to be the currency symbol that comes from file
P_NUMERIC_CHARS not sure
P_CHARSET not sure
P_LOAD_ID not sure
Essentially you could run this process provided you get all the kinks worked out(that is what all the parameters mean/are expected)...
...or..
you write your own process:
- that reads the blob/clob content line by line
declare
n number;
buffer varchar2(4000);
begin
(do some sort of loop until end of length of lob)
n := dbms_lob.instr( "your lob", ',',"next comma position" );
if ( nvl(n,0) > 0 )
then
buffer := dbms_lob.read( p_lob, "amount of lob length to read", n);
end if;
end;
The above code with some tweaking will read the lob. However you still will have to add a piece that creates sql insert statement. One of the pitfalls I see with custom code is the fact that if you end up with huge lob string you will run into problem of creating sql insert statement. Not the actual statement but assigning the statement to a variable due to datatype lengths.
Hopefully this will help you more in the right direction!

Usage of sequence for uploading data into tables(column store) using CSV

How to make use of sequence when data is uploaded into table(column store) with the CSV file ?

Hi Sharada,
You may have to follow the below steps:
1) To load the data from flat file to a Staging table using IMPORT command
2) You have to call the procedure to load the data further into final Table.
a) Have a look on this procedure to load data :
SAP HANA: Generic Procedure using Arrays to Load delta data into Tables
b) See my reply on the syntax on how to use "Sequence"
Auto-Incrementor in stored procedure!
You will have to ensure that you frame your insert query in such a way to have the sequence number in the target table.
Regards,
Krishna Tangudu

Is there a way to Insert Data into a Lookup Column Type on a SharePoint List Destination in SSIS?

Greetings.
I have successfully worked out inserting SQL data (2008 R2) into my 2010 SharePoint list (New, Update, Delete) by creating an SSIS Data Flow Task as outlined here:
http://fsugeiger.blogspot.com/2010/01/synchronise-sql-table-with-sharepoint.html
However, the problem I am running into is inserting data into the SharePoint Columns that are "Lookup" column types. I verified that all of the values I am copying from SQL into the SharePoint lookup column exist in the customn list it is pointing to. It
is important to have this column be a lookup column as it links to another custom list that has many more columns of related information.
I have read and re-read the SharePoint SSIS Adapters 2011.docx from
http://sqlsrvintegrationsrv.codeplex.com/ and the only section that seems to apply is this:
"Looking Up Values in a SharePoint List
If you have to look up a value in a SharePoint list, you can use the Lookup transformation in your data flow, and use the SharePoint List source to load the lookup table. You may have to add a Derived Column transformation or a Script component that splits
data in the lookup column on the ";#" delimiter to separate the ID value from the description.
If you are replacing values in your data with the values that you look up in the list, then loading the changed data back into SharePoint, you only have to include the ID from the lookup column. SharePoint ignores the description if you include it."
I am not sure if the above statement means that I should be passing the assocaited ID's other than the actual data into the SharePoint List destination. If that is the case, that will not really work as the lookup contains hundreds of rows. Not too mention
I have several of these lookup column types pointing to several different lists.
Any guidance in how I can put data into a SharePoint Lookup column type via Data Flow Task would be so much appreaciated.
Thank you.
My errors are:
Error: 0x0 at Data Flow Task, SharePoint List Destination: Error on row ID="1": 0x1 - Unspecified error, such as too many items being updated at once (batch), or an invalid core field value.
Error: 0xC0047062 at Data Flow Task, SharePoint List Destination [1903]: Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.PipelineProcessException: Errors detected in this component - see SSIS Errors at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListDestination.ProcessInput(Int32
inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (1903) failed with error code 0x80131500 while processing input "Component Input" (1912). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will

I have found a solution to my problem and thought I would share it here in case there are others who are struggling with the above scenario. If you have a better way, I would love to hear about it since my way is a bit tedious.
In a nutshell, in order to have an SSIS package put data from an OLE DB Source into a SharePoint List Destination Lookup Column, you need to pass the ID of the value that is being looked up, not the value that is in the “master” OLE DB source.
Rough explanation, OLE DB Source value for column “Approp” is “4005” --> SQL matches “4005” with the ID in the new lookup table (“4005” = ID “5” as defined in the SharePoint lookup list) --> “5” gets passed into SharePoint List destination lookup
column --> SharePoint displays “4005” and successfully links to the lookup list.
Funny thing (not really), the error(s) outlined in my original post are not related in getting data into a SharePoint Lookup column as I am now successful in getting data into the system but I am still getting the same above error(s). I think it has to do
with the ID column in the SharePoint list destination. What I can’t seem to figure out is why since I am not linking any data to that ID column (at least on new records). I am however linking it on Update and Delete and the errors mentioned above disappear
and things work well.
There are three tasks that need to get done in order to get data from SQL into a SharePoint lookup column assuming you have already set up your SharePoint lookup lists:
1. Create new lookup table(s) in SQL that has the IDs from the SharePoint Lookup list and the values coming from the “master” OLD DB Source. You can see the ID column in SharePoint by toggling it on in a view.
2. Create a SQL command that JOINs all the databases and tables so that the ID is passed and not the value into the SharePoint lookup column
3. Change the “Data access mode” to “SQL Command” instead of the “Table or view” in the OLE DB Source and paste your command into the “SQL command text:” area.
Other helpful info is that you may also need to add additional columns in the new lookup tables in SQL for the scenarios when the data is not unique. You can see this two times in my SQL command example for Units and JobTitles:
SELECT
pps.SSNm,
pps.file_updated,
pps.Employee_id,
/* pps.CheckDistNm,*/
Check_Distribution_id = COALESCE( d.ID, 0 ),
pps.Job_nbr,
pps.SeqNm,
pps.action_eff_dt,
Fund_id = COALESCE( f.id, 0 ),
Appropriation_id = COALESCE( ap.id, 0 ),
ActionCode_id = COALESCE( ac.id, 0 ),
SpecNumber_id = COALESCE( jt.ID, 0 ),
pps.Employee_id,
/* pps.Fund,
pps.Approp,
pps.Unit,*/
Unit_id = COALESCE( u.ID, 0 ),
PosNm,
PosCode,
pps.LastName,
pps.FirstName,
pps.MI
FROM
x_PPS.aReportVw.pps_screens_active AS pps
LEFT OUTER JOIN dbo.DistributionNumbers AS d ON
pps.CheckDistNm = d.Check_Distribution
LEFT OUTER JOIN dbo.Units AS u ON
pps.Fund = u.Fund AND
pps.Approp = u.Approp AND
pps.Unit = u.Unit
LEFT OUTER JOIN dbo.Appropriations AS ap ON
pps.Approp = ap.Approp
LEFT OUTER JOIN dbo.Funds AS f ON
pps.Fund = f.Fund
LEFT OUTER JOIN dbo.ActionCodes AS ac ON
pps.ActionCode = ac.ActionCode
LEFT OUTER JOIN dbo.JobTitles AS jt ON
pps.SpecNm = jt.SpecNumber AND
pps.JurisClass = jt.JurisClass

Error While Inserting Data into table using OAF

Hi Experts,
I am learning OAF; i am trying into insert the data into table using OAF. I followed the below procedure.
My table(OLF_TEST_TBL) Columns:
EmpID (Number), Ename(VARCHAR2 100), Sal Number, and who columns.
1. created Application Module (AM).
package: oracle.apps.mfg.simplepg.server
name: oaf_test_tbl_am
2. created simple page
name:EmployeePG
package:oracle.apps.mfg.simplepg.webui
3. Assigned the Application Module to Page
4. Created Entity Object(EO)
name:oaf_test_tbl_eo
package:oracle.apps.mfg.simplepg.schema.server
schema:apps
table:OLF_TEST_TBL
note:
1. EMPID column is selected as primary key
2. selected create method, remove method and validation method.
3.checked generate default view object
VO:
name:olf_test_tbl_vo
note: Entity Object was assigned to VO
Coming To page:
page main region:EmployeeMainRN
1.under main region i created one more region using wizard
selected AM and VO, region style-default single column
2. under main region i created one more region
region style- pagebuttonbar, ID:pagebutoonsRN
3. under pagebuttonRN, created two submit buttons(ID:SUBMIT, ID:CANCEL).
In AM java page:
created a method to insert row and for commit.
Insert Method:
public void insertrow(){
OAViewObject vo=(OAViewObject)getoaf_test_tbl_vo1();
if(!vo.isPreparedForExecution()){
vo.executeQuery();
Row row=vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Commit Method:
public void savaDataTooaftesttable(){
getDBTransaction().commit();
In EmployeeMainRN, created a controller.
In this controller process request method, 'insertrow' method was called.
import oracle.apps.fnd.framework.OAApplicationModule;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("insertrow");
To commit the transaction when SUBMIT button pressed, commit method was called in process form request method.
import oracle.apps.fnd.framework.OAViewObject;
public void processformRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("SUBMIT") != null)
am.invokemethod("savaDataTooaftesttable");
Error After clicking the submit button_
I ran the page, page was opened successfully. Once i enter data and click submit button, it's giving the following error.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object oaf_test_tbl_am.oaf_test_tbl_vo1700_oaf_test_tbl_vo1_practice_test_prc1_oracle_apps_mfg_simplepg_server_oaf_test_tbl_am.oaf_test_tbl_vo1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Experts, Kindly help me why i am getting this error.
Awating your replies.
Thanks in advance.

If you dont want to create message. You can throw exception like below as well
throw new OAException("Emp Id is "+empId+" and employee name is "+empName, OAException.CONFIRMATION);Thanks
--Anil

Insert data into table from JSP page using Entity Beans(EJB 3.0)

I want to insert data into a database table from JSP page using Entity Beans(EJB 3.0).
1. I have a table 'FRIENDS', (in Oracle 10g database).
2. It has two columns, 'NAME' and 'CITY'. Both have datatype strings(varchar2).
3. Now from a JSP page, having two textfields, 'NAME' and 'CITY', I want to insert data into table 'FRIENDS'.
4. In between JSP and database is a Entity Bean(EJB 3.0) and a stateless session bean.
5. I am using JDev as editor.
Please provide me code ASAP or link with similar example.
Thank you.
Anurag

Hi,
I am also trying that scenario. So u can
Post the jsp form data to a Servlet which will act as a Controller.
In the servlet invoke the business method.
Similar kind of app is in www.roseindia.net
Hope this would help u.
Meanwhile if u get any optimal solution, pls post it.
Thanks,
Happy Java Coding.

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

Inserting XML String into Table with help of Stored Proc

I will be getting XML String from JAVA, which I have to insert in Table A, XML String is as follows
<?xml version = '1.0'?>
< TableA>
<mappings Record="3">
< MESSAGEID >1</ MESSAGEID >
< MESSAGE >This is available at your address!</ MESSAGE>
</mappings>
<mappings Record="3">
< MESSAGEID >2</ MESSAGEID>
< MESSAGE >This isn’t available at your address. </ MESSAGE>
</mappings>
</ TableA >
Table Structure*
MESSAGEID     VARCHAR2(15 BYTE)
MESSAGE     VARCHAR2(500 BYTE)
This is the stored procedure which I have written to insert data into TableA, V_MESSAGE will be input parameter for inserting XML String
create or replace procedure   AP_DBI_PS_MESSAGE_INSERT
V_MESSAGE VARCHAR2(1024)
AS
declare
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
V_FILEHANDLE UTL_FILE.FILE_TYPE;
begin
-- the name of the table as specified in our DTD
xmlgen.setRowsetTag('TableA');
-- the name of the data set as specified in our DTD
xmlgen.setRowTag('mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen(V_MESSAGE);
--v_FileHandle := V_MESSAGE;
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
rowsp := xmlgen.insertXML('ONE.TableA',finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
xmlgen.resetOptions;
end;Please Help
Edited by: 846857 on Jul 18, 2011 10:55 PM

with t as (select xmltype('<TableA >
                           <mappings Record="3">
                           <MessageId>1</MessageId>
                           <Message> This bundle is available at your address!</Message>
                           </mappings>
                           <mappings Record="3">
                           <MessageId>2</MessageId>
                           <Message>This isn’t available at your address. </Message>
                           </mappings>
                           </TableA >') col FROM dual)
--End Of sample data creation with subquery factoring.
--You can use the query from here with your table and column name.
select EXTRACTVALUE(X1.column_value,'/mappings/MessageId') MESSAGEID
      ,EXTRACTVALUE(X1.column_value,'/mappings/Message') MESSAGE
from t,table(XMLSEQUENCE(extract(t.COL,'/TableA/mappings'))) X1;Above Code works as i get result
MESSAGEID     MESSAGE
1             This bundle is available at your address!
2             This isn’t available at your address.
_____________________________________________ now I want to insert the result into Table A... How to proceed... Please help
Edited by: 846857 on Jul 19, 2011 12:15 AM

Insert data into table 1 but remove the duplicate data

hello friends,
i m trying to insert data into table tab0 using hints,
query is like this..
INSERT INTO /*+ APPEND PARALLEL(tab0) */ tab NOLOGGING
(select /*+ parallel(tab1)*/
colu1,col2
from tab1 a
where a.rowid =(select max (b.rowid) from tab2 b))
but this query takes too much time around 5 hrs...
bz data almost 40-50 lacs.
i m using
a.rowid =(select max (b.rowid) from tab2 b))....
this is for remove the duplicate data..
but it takes too much time..
so please can u suggest me any ohter option to remove the duplicate data so it
resolved the optimization problem.
thanks in advance.

In the code you posted, you're inserting two columns into the destination table. Are you saying that you are allowed to have duplicates in those two columns but you need to filter out duplicates based on additional columns that are not being inserted?
If you've traced the session, please post your tkprof results.
What does "table makes bulky" mean? You understand that the APPEND hint is forcing the insert to happen above the high water mark of the table, right? And you understand that this prevents the insert from reusing space that has been freed up because of deleted in the table? And that this can substantially increase the cost of full scans on the table. Did you benchmark the INSERT without the APPEND hint?
Justin

Cannot enter data into table with column named DATE

Similar Messages

Maybe you are looking for