Cannot find /var/log/httpd/error_log

I've searched on the forum about the "Personal Web Sharing" not starting up and just showing "Web Sharing starting up...". In most cases you have to look up the error_log at /var/log/httpd/error_log.
In my case there is no such file. Terminal shows this:
-bash: /var/log/httpd/error_log: No such file or directory
This problem started when I tried to enable php in Apache. I changed the +AddModule mod_php4.c & LoadModule php4_module libexec/httpd/libphp4.so+ by deleting the # in front the lines.

Hi Matt,
Yes, it worked before I started trying activating PHP. It doesn't work when I recomment those lines either. There're no documents in /var/log/httpd folder. The http.conf file that I modified earlier were in /etc/httpd/. This is how it looks like now in http.conf
+#LoadModule php4_module libexec/httpd/libphp4.so+
+#AddModule mod_php4.c+
+<IfModule mod_php4.c>+
+# If php is turned on, we repsect .php and .phps files.+
+AddType application/x-httpd-php .php+
+AddType application/x-httpd-php-source .phps+
+# Since most users will want index.php to work we+
+# also automatically enable index.php+
+<IfModule mod_dir.c>+
+DirectoryIndex index.html index.php+
</IfModule>
Message was edited by: Saffari

Similar Messages

  • Cannot find acsbackup_instance.log in the backup file

    hi,
    I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me  error "Cannot find acsbackup_instance.log in the backup file"
    I am using Filezilla FTP sever for backup transfer.
    suggest... Thanks in advance..
    Regards,
    Avi.

    That is strange!! Just make sure you are using the TFTP and not the DESK in the repository. It looks to me that you are trying to restore from the DESK and not the TFTP and it could not find the backup file int he DESK.
    If you double check the repository and you are 100% sure that the TFTP is being used then I would recommend to open a TAC case and feedback us about what the issue was if the TAC discovered the root cause of this.
    btw, what you see if you apply this command on CLI:
    show backup history
    Thanks.
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Cannot find error log

    When launching a calculation script, I get the following error:
    "An error occurred while processing this page. Check the log for details."
    I do not know where to find this log. I would like to know the log name and where I can find it. Thank you very much.

    If it is a calc script, you could try have a look at the essbase application log.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Cannot find UME logs

    Dear SDN
    I am reding the online help and it says
    Usermanagement log: …/logs/system/security/usermanagement/defaultLog.log
    I see no directory on the filesystem or an entry in the visual admin for this???
    Thanks

    Hi
    By default, UME logs are found in /usr/sap/EPD/JC00/j2ee/cluster/server0/log/system/security.0.log for UNIX installation.
    The number zero in "security.0.log" is a counter from 0 to 9.
    Thanks and regards
    Kwong Tat

  • WatchESPN (ESPN3) cannot find Comcast log on info.

    I use ESPN3 mainly on an iPad. In the last few weeks, I've been unable to access it. You have to choose your provider (ESPN3 access is free with Comcast) and get a list of ISPs. Choosing Caomcast just gets a 404 File Not Found error. (Choosing other providers brings up their log on screen, just as Comcast used to do) I have tried deleting and reloading the ESPN3 app; deleting cookies etcetera. I tried Comcast chat and the tech reset my account (not sure what that means) but it clearly isn't a problem with my account, as I don't get the chance to ever put my account info in.  ESPN Help says it's a COmcast problem. Comcast says it's ESPN!!

    did you ever resolve this problem? I am getting the same error and today is July 9. So that means this is been going on for quite some time. I think this has to be an ESPN error as they have the wrong address for the server.

  • Apache and My SQL won't start when server starts, error in /var/log

    OS X Server 10.4.6
    Everything looks OK, but when I restart the server, Apache does not restart.
    The var/log/system contains the following line:
    SystemStarter[965]: Apache web server (1002) did not complete successfully
    /etc/hostconfig contains the following lines:
    MYSQL=-YES-
    WEBSERVER=-YES-
    What is the standard OS X boot sequence that should start it? i.e. what script gets executed during boot?
    If I start by hand (Server Admin), it runs fine.
    _mike

    Check /var/log/httpd/error_log after a restart, it will probably have more info about what went wrong with Apache.
    Both Apache and MySQL use startupitem scripts located in /System/Library/StartupItems.
    The fact that they start up fine manually, several seconds later, probably means that some prerequisite isn't quite ready when they try to start. A quick kludge that will quite probably work would be to put like a 10 second delay in their scripts with the following line at the top of the StartService section:
    sleep 10
    Roger

  • I cannot find where to log in or change identities

    There used to be a log-in spot on the Firefox home page. I've located most of the other things I was used to, but I cannot find that log in spot. I've managed so far by Googling Gmail, and there I can log in, but why isn't it on the Firefox drop-down options on on the home page? I miss the easy access to Google Maps and Gmail from the old version too, but the log-in hassle is the worst.

    Firefox 4 comes with a new build-in home page called about:home<br />
    That about:home page has as only feature a button to restore the previous session if applicable.
    You can change the home page to http:\\www.google.com or http:\\www.google.com\firefox to get access to the Google menus.
    * [[How to set the home page]]

  • What's The Terminal Command To Find Apache Log Files?

    I can't find it anywhere.
    Thank you.

    It looks like either:
    $ grep ErrorLog /private/etc/apache2/httpd.conf
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    ErrorLog "/private/var/log/apache2/error_log"
    or
    /usr/sbin/apachectl -V | egrep 'HTTPD_ROOT|ERRORLOG'
    -D HTTPD_ROOT="/usr"
    -D DEFAULTERRORLOG="logs/errorlog"
    Though red_menace probably knows better that I.
    Message was edited by: Nils C. Anderson

  • I've used the same apple ID for years and it is now saying it cannot find it. It won't allow me to log in to manage my account

    So I am trying to get into manage my account on appleid.apple.com.  My ultimate goal is to edit my primary email address so that I can switch it over.  I no longer have access to the email address that is registerd as my apple ID.  However, when I log into manage my account, it is saying it cannot find my Apple ID, and when I try to the reset password, it tells me an e-mail has been sent and to open it to verify (it will not give me the "edit e-mail for verification" option.)  I am running into a load of problems.  Ultimately I just want to be able to have access to my Apple ID that I have had for years but now the password can't be reset, and the apple ID can't be found.  I am at a loss.

    Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
    During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

    I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

    Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

  • SSRS Sharepoint Integrated Mode logs - Cannot find site lookup info for request Uri AND [Forced due to logging gap]

    Hi,
    Our reports run very slow in SharePoint Integrated mode. I look at the logs and I see that for one report request there are bunch of "Forced due to logging gap" rows. Is it some kind of a configuration issue or is it working as it should. Below
    is the full log for one report request. I have no admin experience at all and I am confused what each one in the logs mean. I have made some of them in bold font as I suspect it is some kind of configuration issue there. Could you please help understanding
    those logs?
    Line 25: 07/29/2014 09:17:34.54 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Topology                      
    e5mb
    Medium  
    WcfReceiveRequest: LocalAddress:   'http://xxxxx.com:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc'   Channel: 'System.ServiceModel.Channels.ServiceChannel' Action:   'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Streaming/ProcessStreamRequest'
      MessageId: 'urn:uuid:10b1c246-8c70-400b-9b62-fe0d87a2ae8c'
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 28: 07/29/2014 09:17:34.54 
    w3wp.exe (0x0A6C)                       
    0x070C
    SQL Server Reporting Services 
    Report Server WCF Runtime     
    0
    Medium  
    Entering ExeuteCommand - Command = Render
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 29: 07/29/2014 09:17:34.54 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Authentication Authorization  
    agb9s
    Medium  
    Non-OAuth request. IsAuthenticated=False, UserIdentityName=,   ClaimsCount=0
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 30: 07/29/2014 09:17:34.54 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    General                       
    adyrv
    High    
    Cannot find site lookup info for request Uri   http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 31: 07/29/2014 09:17:34.59 
    w3wp.exe (0x0A6C)                       
    0x070C
    SQL Server Reporting Services 
    Report Server Catalog         
    0
    Medium  
    RenderForNewSession('https://xxx.com/xxx.rdl')
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 32: 07/29/2014 09:17:34.60 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Authentication Authorization  
    ajmmt
    High    
    [Forced due to logging gap, cached @ 07/29/2014 09:17:34.59,   Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0},   UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 33: 07/29/2014 09:17:34.60 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    8acb
    High    
    [Forced due to logging gap, Original   Level: VerboseEx] Reverting to process identity
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 34: 07/29/2014 09:17:34.62 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    General                       
    adyrv
    High    
    Cannot find site lookup info for   request Uri   http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 35: 07/29/2014 09:17:34.74 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    7t61
    High    
    [Forced due to logging gap, cached @   07/29/2014 09:17:34.63, Original Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 36: 07/29/2014 09:17:34.74 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    General                       
    6t8b
    High    
    [Forced due to logging gap, Original   Level: Verbose] Looking up {0} site {1} in the farm {2}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 37: 07/29/2014 09:17:34.85 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Runtime                       
    afu6a
    High    
    [Forced due to logging gap, cached @   07/29/2014 09:17:34.77, Original Level: VerboseEx] No   SPAggregateResourceTally associated with thread.
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 38: 07/29/2014 09:17:34.85 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Runtime                       
    afu6b
    High    
    [Forced due to logging gap, Original   Level: VerboseEx] No SPAggregateResourceTally associated with thread.
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 39: 07/29/2014 09:17:34.94 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    7t61
    High    
    [Forced due to logging gap, cached @   07/29/2014 09:17:34.88, Original Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 40: 07/29/2014 09:17:34.94 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    7t61
    High    
    [Forced due to logging gap, Original   Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 103: 07/29/2014 09:18:05.55 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    7t61
    High    
    [Forced due to logging gap, cached @   07/29/2014 09:17:34.96, Original Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 104: 07/29/2014 09:18:05.55 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    General                       
    6t8b
    High    
    [Forced due to logging gap, Original   Level: Verbose] Looking up {0} site {1} in the farm {2}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 105: 07/29/2014 09:18:05.62 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    General                       
    6t8h
    High    
    [Forced due to logging gap, cached @   07/29/2014 09:18:05.55, Original Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 106: 07/29/2014 09:18:05.62 
    w3wp.exe (0x0A6C)                       
    0x070C
    SharePoint Foundation         
    Database                      
    7t61
    High    
    [Forced due to logging gap, Original   Level: Verbose] {0}
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Line 107: 07/29/2014 09:18:05.62 
    w3wp.exe (0x0A6C)                       
    0x070C
    SQL Server Reporting Services 
    Report Server WCF Runtime     
    0
    Medium  
    Processed report. Report='https://xxx.com/xxx.rdl', Stream=''
    894aa99c-9fb3-c007-caf4-32ba68af9901
    Thank you.

    That is likely the case as native mode is quicker than SharePoint-integrated.
    A couple of things to check, and perhaps change if you can:
    1) Make sure the latest SSRS ReportViewer is deployed to the SharePoint WFEs. This does not have to match your SSRS deployment version. See http://msdn.microsoft.com/en-us/library/gg492257.aspx
    for the compatibility table.
    2) If possible, move SSRS to the same SharePoint servers that end users interact with (e.g. the "WFEs").
    3) Make sure the underlying server hosting SharePoint has C-States disabled (these are Intel C-States, e.g. C1, C2, C3... aka processor sleep states). If the server has any sort of power regulation, make sure it is at maximum performance (rather than some
    form of power saving).
    4) Make sure the underlying Windows OS has it's Power Management set to Maximum, rather than any sort of power savings.
    You can review the execution logs in the Reporting Services database. Take a look at the ExecutionLog3 view. Compare the TimeProcessing (time it takes to process the report) and TimeRendering (time it takes for the processed report to render to the end user).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Error in Java compilation: \s7u.log (The system cannot find the file specified)

    Hi there,
    I got an error when I tried to compile a group of sqlj and java files. The error below:
    ----------------------------------------------sqlj -status -passes -compile=true -ser2class -d=. -classpath=.;%CLASSPATH% E:\work\src\java\com\interadnet\persistence\*.sqlj E:\work\src\java\com\interadnet\persistence\*.java
    out [Translating 53 files]
    out [Reading file AdServerInformationType]
    out [Reading file AdsType]
    out [Reading file AgencyType]
    out [Reading file CampaigntocompletionType]
    out [Reading file CampaignType]
    out [Reading file ChannelType]
    out [Reading file ClientType]
    out [Reading file CompletionType]
    out [Reading file ContactType]
    out [Reading file CreativeType]
    out [Reading file FtpServerType]
    out [Reading file InsertioninstructionType]
    out [Reading file MediaServerType]
    out [Reading file SystemPropertyType]
    out [Reading file VendorType]
    out [Reading file AdServerInformationTypeRef]
    out [Reading file AdServerInformationView]
    out [Reading file AdsTypeRef]
    out [Reading file AdsView]
    out [Reading file AgencyTypeRef]
    out [Reading file AgencyView]
    out [Reading file CampaigntocompletionTypeRef]
    out [Reading file CampaignToCompletionView]
    out [Reading file CampaignTypeRef]
    out [Reading file CampaignTypeRefs]
    out [Reading file CampaignView]
    out [Reading file ChannelTypeRef]
    out [Reading file ChannelTypeRefs]
    out [Reading file ChannelView]
    out [Reading file ClientTypeRef]
    out [Reading file ClientTypeRefs]
    out [Reading file ClientView]
    out [Reading file CompletionTypeRef]
    out [Reading file CompletionTypeRefs]
    out [Reading file CompletionView]
    out [Reading file ContactTypeRef]
    out [Reading file ContactView]
    out [Reading file CreativeTypeRef]
    out [Reading file CreativeTypeRefs]
    out [Reading file CreativeView]
    out [Reading file FtpServerTypeRef]
    out [Reading file FtpServerView]
    out [Reading file InsertioninstructionTypeRef]
    out [Reading file InsertioninstructionTypeRefs]
    out [Reading file InsertionInstructionView]
    out [Reading file MediaServerTypeRef]
    out [Reading file MediaServerView]
    out [Reading file SystemPropertyTypeRef]
    out [Reading file SystemPropertyTypeRefs]
    out [Reading file SystemPropertyView]
    out [Reading file VendorTypeRef]
    out [Reading file VendorTypeRefs]
    out [Reading file VendorView]
    out [Translating file AdServerInformationType]
    out [Translating file AdsType]
    out [Translating file AgencyType]
    out [Translating file CampaigntocompletionType]
    out [Translating file CampaignType]
    out [Translating file ChannelType]
    out [Translating file ClientType]
    out [Translating file CompletionType]
    out [Translating file ContactType]
    out [Translating file CreativeType]
    out [Translating file FtpServerType]
    out [Translating file InsertioninstructionType]
    out [Translating file MediaServerType]
    out [Translating file SystemPropertyType]
    out [Translating file VendorType]
    out [Translating file AdServerInformationTypeRef]
    out [Translating file AdServerInformationView]
    out [Translating file AdsTypeRef]
    out [Translating file AdsView]
    out [Translating file AgencyTypeRef]
    out [Translating file AgencyView]
    out [Translating file CampaigntocompletionTypeRef]
    out [Translating file CampaignToCompletionView]
    out [Translating file CampaignTypeRef]
    out [Translating file CampaignTypeRefs]
    out [Translating file CampaignView]
    out [Translating file ChannelTypeRef]
    out [Translating file ChannelTypeRefs]
    out [Translating file ChannelView]
    out [Translating file ClientTypeRef]
    out [Translating file ClientTypeRefs]
    out [Translating file ClientView]
    out [Translating file CompletionTypeRef]
    out [Translating file CompletionTypeRefs]
    out [Translating file CompletionView]
    out [Translating file ContactTypeRef]
    out [Translating file ContactView]
    out [Translating file CreativeTypeRef]
    out [Translating file CreativeTypeRefs]
    out [Translating file CreativeView]
    out [Translating file FtpServerTypeRef]
    out [Translating file FtpServerView]
    out [Translating file InsertioninstructionTypeRef]
    out [Translating file InsertioninstructionTypeRefs]
    out [Translating file InsertionInstructionView]
    out [Translating file MediaServerTypeRef]
    out [Translating file MediaServerView]
    out [Translating file SystemPropertyTypeRef]
    out [Translating file SystemPropertyTypeRefs]
    out [Translating file SystemPropertyView]
    out [Translating file VendorTypeRef]
    out [Translating file VendorTypeRefs]
    out [Translating file VendorView]
    out [Compiling 53 Java files]
    err*** The following character string is too long:
    err***
    out Error in Java compilation: \s7u.log (The system cannot find the file specified)
    Any suggestion appreciated.
    Daniel Huang

    Having not seen this before, I assume that the issue is that the command line string is too long when Javac is invoked.
    Here are a few things to reduce the size of the command line:
    - do not use the CLASSPATH option, but set the CLASSPATH environment variable (you can to that in a .bat file)
    - do not provide the .java files but rely on the implicit make capability in both, the SQLJ translator and the Java compiler. (Note: you must mention all of the .sqlj files that your program requires, do not rely on implicit make to find all of those.)
    - you can perform the -ser2class conversion as a separate step (see the SQLJ FAQ), as well as the Java compilation
    - there may or may not be a facility in your operating system to increase the size of the environment (and this may or may not have an effect on the maximum command line length)
    - you could try to omit the -passes option and see if that helps (that may actually be where your invocation if failing in the first place, in that it cannot write to some temporary file).
    Let us know how it goes. Thanks!

  • VSTO 2010 Addin installed on Outlook 2007 Machine: Giving binding error - 0x80070002. The system cannot find the file specified (Fusion Log).

    Fusion log:
    The operation failed.
    Bind result: hr = 0x80070002. The system cannot find the file specified.
    Assembly manager loaded from: C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Running under executable C:\PROGRA~1\MICROS~2\Office12\OUTLOOK.EXE
    --- A detailed error log follows.
    === Pre-bind state information ===
    LOG: User = XP-2007\Administrator
    LOG: DisplayName = Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL
    (Partial)
    WRN: Partial binding information was supplied for an assembly:
    WRN: Assembly Name: Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL | Domain ID: 2
    WRN: A partial bind occurs when only part of the assembly display name is provided.
    WRN: This might result in the binder loading an incorrect assembly.
    WRN: It is recommended to provide a fully specified textual identity for the assembly,
    WRN: that consists of the simple name, version, culture, and public key token.
    WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
    LOG: Appbase = file:///C:/Program Files/Blue Jeans/Outlook Addin/
    LOG: Initial PrivatePath = NULL
    LOG: Dynamic Base = NULL
    LOG: Cache Base = NULL
    LOG: AppName = OUTLOOK.EXE
    Calling assembly : (Unknown).
    ===
    LOG: Start binding of native image Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, PublicKeyToken=null.
    WRN: No matching native image found.
    LOG: IL assembly loaded from C:\Documents and Settings\Administrator\Local Settings\Application Data\assembly\dl3\LZMMEM67.CTT\397DNQ77.1W9\c337c5e7\0023f77f_891ed001\Blue Jeans Outlook Addin.dll.
    The required correct settings file is present in the location C:\Program Files\Blue Jeans\Outlook Addin but the .NET created user.config in AppData have wrong entries. The machine is installed with VSTO 2010 and .NET 4.0 Client Profile. Also the KB 976477 is
    already installed the registry entry EnableLocalMachineVSTO (KB 976811) is made. May someone please give me a clue on why the user.config file is created with wrong entries and also, why this assembly binding error happening?
    Thanks in advance.
    Prasad

    this might help:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2601334c-d5cb-4f51-a99a-4d8ea9217938/userconfig-file-problem-after-upgrading-to-outlook-2010-from-2007?forum=vsto
    VSTO Word add-in user.config lost every update

  • Logging Error Message in Console  [Servlet Error]-[Cannot find FacesContex]

    Hi,
    I am using Web Application with JSF . but when i log in into the web appl everthing is fine but in back end i mean the console of RAD Tool having some logging Error message:
    SRVE0026E: [Servlet Error]-[Cannot find FacesContext]: javax.servlet.jsp.JspException: Cannot find FacesContext
    at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java(Compiled Code))
    at com.sun.faces.taglib.jsf_core.ViewTag.doStartTag(ViewTag.java(Compiled Code))
    at org.apache.jsp._index._jspService(_index.java:86)
    at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.java(Compiled Code))
    at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
    at com.ibm.ws.webcontainer.jsp.servlet.JspServlet$JspServletWrapper.service(JspServlet.java(Compiled Code))
    at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.serviceJspFile(JspServlet.java(Compiled Code))
    at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.service(JspServlet.java(Compiled Code))
    So could you please help me find out the solution for this :
    While i am using the code in jsp page:
    <%@taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
    <%@taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <HTML>
    <HEAD>
    <META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <META http-equiv="Content-Style-Type" content="text/css">
    <TITLE>Web App
         <f:view>
              <h:outputText value="#{dataInfo.info}"/>
         </f:view>
    </TITLE>
    Suggest me the solution:
    Regards,
    Prabhat

    This usually means that you call the JSF page the wrong way. Try something like http://hostname:port/servletcontextroot/faces/page.jspx
    --olaf                                                                                                                                                                                                                                                                                                   

  • Cannot find Hot Sync Log File

    I recently installed Palm dsktop on my new Vista PC. It synchs very well with my TX via bluetooth, BUT whenever there is a Hot Sync Log Message I get an error message saying that the PC cannot find the Hot Sync Log.  I searched for this file on my PC but it cannot be found anywhere. I am using Mozilla Firefox as my web browser.  Is there a solution to this?
    Post relates to: Palm TX

    You could view it on your device. Go to HOTSYNC and tap "Log".
    Post relates to: Zire 71
    Post relates to: Zire 71
    webosnation.com is another option for help.

Maybe you are looking for

  • Wireless module different IP addresses

    hello I have a problem with my wireless router, cisco wireless module allows you to give different IP addresses so that IP addresses are different who can help me please

  • Flash 9 Key press Problem

    Using Flash 9, when running an application from the IDE, key presses of K which are supposed to do something in my app are being captured by the IDE and doing something there instead. Didn't happen in flash 8, is there a way to disable / fix this.

  • OIm 11g: Access policy issue

    Hi All We are using OIm 11.1.1.5.0, Weblogic 10.3.5 and Oracle DB EE 11.2.0.2 We have defined role "CommonUsers" and assigned access policies with "AD and Exchange" resources. Exchange is dependent resource on AD. Then We have excuted PSFT feed file

  • App Store Reports Lion is installed when it is not...

    I purchased OS X Lion from the App Store. I have downloaded it and went to install. The installation failed. I ended up erasing my drive and reinstalling Snow Leopard and then re-downloaded Lion from the App Store.  It was ready to install, however F

  • No Printers are installed / How to Installed printers in HFM (Urgent)

    Hi, we have 2 printers, both are working locally but not from HFM. After login/out it says no printers are installed. Thanks in Advance.