Cannot find web-console

I installed jboss4.0.3 server.But there is no management folder under deploy directory.even i dont get all folder under server directory.what mistakes i did?.so i am not able to start web-console service.can anyone help with this?
thanks in advance
bala.

I found the problem myself.I completely reinstalled JBOSS4.0.3 server once again.Now it's getting executed.I think while installing time we hav to choose the option for web-console
thanks

Similar Messages

NAC GUEST SERVER CANNOT ACCESS WEB CONSOLE

Hello,
I have a NAC guest server. I can access CLI but cannot access web console. I used both the https:// ip address/admin and http://ip address/admin. Please what could be the solution of this issue?
thank you and best regards.
Edwin

Edwin,
Are the various necessary services running on that server? Post the output of following commands:
ps auwwwx
chkconfig --list
service httpd status
service postgresql status
Faisal

Cannot find web address. Verify that this web address is valid

Hi guys,
I have an 8310 and and I get "Cannot find web address. Verify that this web address is valid" when I try to listen to radio on yourmuze.fm or when I try watching videos on youtube. I've tried several things but non of them have worked. Any advice will be greatly appreciated.
Many thanks,
Gabriel

Take a look in Blackberry App World and select the Top Free listings -
Number 19 in the current list is "Xenozu YouTube player" -
It's free but doesn't have very good reviews - might be worth trying though as it could be better than nothing !
If you found my answer ( or anyone else's ) to be helpful, don't forget to click the Kudos button !

Cannot access web console after install.

Hi all.
The last day has been my first encounter with Oracle VM and it seemed to go fine until I finished. I have installed the latest VM and management tools on a bare bones machine (spec below) but cannot access the console via http://machine:8888/OVA.
I have tried installing using https and without and can gain access to neither the https 4443 or the http 8888 yet I can ssh into it quite easily. The dmesg only really complains that there are no ipv6 routers (understandable) but the xend.log in /var/log/xen does show something strange at the bottom:
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:452) Adding Domain: 0
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:386) number of vcpus to use is 0
[2011-07-13 16:04:45 3011] INFO (SrvServer:177) unix path=/var/lib/xend/xend-socket
[2011-07-13 16:04:45 3011] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_type not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: session.get_all_records not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_record not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_all not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.get_network not found <------ ?????
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MAC not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MTU not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: debug.get_all not found
The spec of the machine started out as:
Athlon 64 x2 3600+
4Gb Ram
2 Nics (1 built in Broadcom & 1 Intel MT)
1 NVidia super duper gt9500
3 Hard Disk, (1 IDE 150gb , 1 SATA 80 & 1 SATA 150 - the IDE is master boot with system on it)
After a few attempts, I removed Video and the Intel card.
The install was done via CD and never complained and in this last install, it only had 1 NIC to choose for the management console.
On this last install I also chose top use none https and therefore the system says I should gain access via http://machine:8888/OVA
I do notice though that in some tutorials, it states alternatives to OVA like OVS etc, all of which I have tried.
Oh and if I netstat -an, it shows it's listening on port 8888.
many thanks, I'm guessing it's some a bit silly that I've over looked but from the way I read the install instructions, you only need the VM and the management Disks to install and you should be able to access via web console?
BTW, systems I'm using as clients to access range from, opera, firefox (Soalris), ie 6,7,8 & 9 from Windows and Windows server. All I get is Internet Explorer Cannot Display This Page.
many Thanks, Mark

Did you install the VM Manager software as a VM hosted by OVS? Make sure the VM is running. It is probably named something like OVM_EL5U4_X86_OVM_MANAGER_PVM. Use "xm list" on the OVS server to see which VMs are running.
If it's not running, then run "xm create /path/to/vm.cfg" the path is probably something like /OVS/running_pool/OVM_EL5U4_X86_OVM_MANAGER_PVM/vm.cfg
Jim

Cannot find symbol "console" error

hi there ~
Here is environment:
winXP Pro
jdk1.5.0_04
here is part of my code:
        System.out.print("Enter Bit length   \t:");
        int bitlen = Console.readInt();
     System.out.print("Enter integer to be encrypted :");
     BigInteger big = new BigInteger(Console.readString());here is the error msg:
C:\Program Files\Java\jdk1.5.0_04\bin>javac myRSA.java
myRSA.java:115: cannot find symbol
symbol : variable Console
location: class myRSA
int bitlen = Console.readInt();
^
myRSA.java:157: cannot find symbol
symbol : variable Console
location: class myRSA
BigInteger big = new BigInteger(Console.readString());
^
2 errors
thx for your help in advance.

The javac compiler does not understand what "Console" means in your code. (BTW, to follow recommended coding conventions, you class should be named MyRSA - using coding conventions will get you better help.)
It appears that Console is a class you wrote or was given to you. You need to import it, if it is not in the same package as myRSA. And, the compiler needs to be able to find it through the Classpath.

Fireforx cannot find web page when the page address is correct

How do I solve the message that Firefox cannot find the page when the page address is correct?

Do you want to do a Google search instead?
You can check the keyword.enabled on the about:config page and if necessary then you can toggle this pref to true via a double-click.
*https://support.mozilla.org/kb/Location+bar+search
See also:
*http://kb.mozillazine.org/Error_loading_websites

Cannot find Web Service Template

I cannot locate the template for Web Services in my fresh install of Visual Studio 2012 Professional under Windows 7. I tried resetting my my settings under Tools/Import and Export Settings/Reset all settings, and I tried devenv/installvstemplates.
Under "New Project" "Visual C#", I see the following:
Windows Forms Application
WPF Application
ASP.Net Web Forms Application
Class Library
Blank App
ASP.NET MVC 3 Web Application
ASP.NET MVC 4 Web Application
Grid App (XAML)
Silverlight Application
Split App (XAML)
Silverlight Class Library
Silverlight Business Application
WCF RIA Services Class Library
Class Library (Windows Store apps)
Windows Runtime Component
Unit Test Library (Windows Store apps)
WCF Service Application
ASP.Net Dynamic Data Entries Web Application
Get Windows Azure SDK for .NET
Install Windows Phone SDK 8.0
Excel 2010 Workbook
Outlook 2010 Add-in
Word 2010 Document
Activity Library
WCF Workflow Service Application

Hi,
As far as I know, ASP.NET Web Service Template is only available for .NET Framework 3.5, cannot used in .NET framework 4.0 or newest version.
You can use WCF service application instead. Or you can create a ASP.NET Empty Web application. Then right click the application then select Add->New Item:
You will find the Web service template:
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Cannot find Web Services Configuration under Infrastructure Management

Hi YiNing,
You need to go to SOA Management-> Business Administration-> Web Service Administration.
Best Regards
Pankaj

I think you want to Search for the Proxy Definition DestinationSI and manually create a new logical port for that destination. For that you need to go through the way i have given above and then you can proceed.
regards
Pankaj

Photosmart 6515 B211a cannot find web server (DNS solution doesn't fix it!)

I am having the same problem as described in this thread:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Photosmart-6510-quot-the-printer-was-un...
I followed all of the steps. I found that my Comcast gateway was leasing DHCP addresses between 10.0.0.2 and 10.0.0.252. I have set my IP for the printer at 10.0.0.253, changed the DNS to 8.8.8.8 and 8.8.4.4, and set the gateway to 10.0.0.1 (the address of my Comcast gateway).
I double checked the gateway GUI and it sees the printer connected to the LAN and the address is set to resevered, so it falls outside of the DHCP range. I still can not get this printer to connect to HP Web Services, it sees the LAN, but not the WAN (internet). I can successfully send print jobs from other devices on the LAN.
I need to get this printer setup for Google Cloud Print and this seems to be a roadblock I can't get around.
Sidenote: The printer is a 6515, according to the outside of the printer, but the settings printout calls it a 6510.
Any help would be appreciated.
This question was solved.
View Solution.

OK, I found the problem!
My Comcast gateway was blocking packets of my HP printer -- but not in the firewall settings.
My Comcast gateway comes with a Parental Control feature. I am not sure the particular value of this, but it ovbivously comes with some logic that Comcast doesn't tell you about. I was looking for log files when I flipped through the various screens of the Parental Control section (Parental Control > Reports) and found a log with the following:
UDP Packet - Source:10.0.0.11,56291 Destination:192.168.0.1,53, 14:33:05, 2015-01-17 [PRCTL_DEVICE_LOG] Blocked UDP Packet - Source:10.0.0.11,36479 Destination:192.168.0.1,53, 14:33:01, 2015-01-17 [PRCTL_DEVICE_LOG] Blocked UDP Packet - Source:10.0.0.11,137 Destination:169.254.255.255,137, 14:32:56, 2015-01-17 [PRCTL_DEVICE_LOG] Blocked
This pattern goes on for several log entries, but there it is 10.0.0.11, my printer, was trying to connect to the outside world and was being blocked by the gateway!
Here is how I got my gateway to stop blocking my printer:
1. Log into your Comcast Xfinity gateway.
2. Click on Parental Control
3. Click on Managed Devices
4. See the section marked Blocked Devices? Mine was populated with a device whose name started with "HP".
5. Click the X on the same line as your printer and click ok to confirm the delete.
Your printer should now have access to send packets out to the world! If is doesn't work, see if you have other blocked devices and remove those as well.
I went ahead and just turned off the Parental Control on my gateway. I wasn't sure how my printer got on this list -- and a laptop that wouldn't work and Comcast support said it was my Linux install...wrong again Comcast -- but I don't want these devices working their way back onto the list.

Logging Error Message in Console [Servlet Error]-[Cannot find FacesContex]

Hi,
I am using Web Application with JSF . but when i log in into the web appl everthing is fine but in back end i mean the console of RAD Tool having some logging Error message:
SRVE0026E: [Servlet Error]-[Cannot find FacesContext]: javax.servlet.jsp.JspException: Cannot find FacesContext
at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java(Compiled Code))
at com.sun.faces.taglib.jsf_core.ViewTag.doStartTag(ViewTag.java(Compiled Code))
at org.apache.jsp._index._jspService(_index.java:86)
at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet$JspServletWrapper.service(JspServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.serviceJspFile(JspServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.service(JspServlet.java(Compiled Code))
So could you please help me find out the solution for this :
While i am using the code in jsp page:
<%@taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
<%@taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<META http-equiv="Content-Style-Type" content="text/css">
<TITLE>Web App
 <f:view>
 <h:outputText value="#{dataInfo.info}"/>
 </f:view>
</TITLE>
Suggest me the solution:
Regards,
Prabhat

This usually means that you call the JSF page the wrong way. Try something like http://hostname:port/servletcontextroot/faces/page.jspx
--olaf

Cannot access SPE2000 web console

Hi,
I was able to access the web console before but all of the sudden last week when we tried to login to do some configuration it didn't recognize it. I tried default login and still failed. So, I did factory reset of the switch and couldn't find the IP. I use 'FastResolver' to find the MAC address of the device and it didn't find it. I did some research and they mention to use 192.168.100.20 that failed. I even tried scanning for 192.168.1.x, 192.168.2.x, and 192.168.3.x and 192.168.15.x. But didn't find the device. Then I did again without any router or uplink connected and even assigned static IP on the laptop. We have 2 other switches of exact same make and model with same exact issue. We also have encounter similar issue in the past so not sure if anyone have come across this issue. Plus I need help on accessing the switch so we can put back same configuration we had before.
Thank You,
Ankur

Hello,
I'm really sorry you are having issues with these devices.
Now, these switches are a little on the older side, and I'm not sure they will request for a DHCP address, so maybe that's why you cannot find it as they are not getting an address on the network.
What I will recommend is to unplug the switch from the network just to be sure, then factory reset it, connect a PC directly to it and assign a static IP address of 192.168.1.100 to it, then open a web browser and try to access the interface of the switch by going to 192.168.1.254.
I hope this helps.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advance

Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

I cannot find my original disks for Adobe Web Premium CS4. How do I move the software from my old laptop to a new one?

I purchased a new laptop and am in the process of installing all my software. Due to a recent move, I cannot find my installation disks for Web Premium CS4. Is there a way to move the software from the old laptop to the new one? I am a casual user of the software and do not want to upgrade to a new version.

Download CS4 products
Mylenium

Cannot find web-console

Similar Messages

Maybe you are looking for