Cannot forward Exchange Custom Form from Exchange 2010

We have an Exchange Calendar Custom Form that we use for our change control. When we migrate users to Exchange 2010, they are able to view the Public Folder/Events, but when they try to forward the event, there is not attachment with it.
Anyone?
Karl

Any errors in the event logs?
HossFly, Exchange Administrator

Similar Messages

Compile all custom forms from 11i to r12

Hi,
I have to compile 11i forms into R12.
Copyresource folder and fmb to local system and compile forms manually in local system is one way
I heard there is another easy way of compiling custom forms from 11i to r12. If you have any solution for this please help me.
Any help is big help, thanks in advance.

Hi;
In addition to Hussein Sawwan great post,please review:
Custom form upgrade 11i to R12
Planning to upgrade from 11i to R12
Oracle Custom 11i Forms compatablity in Oracle R12
Oracle Custom 11i Forms compatablity in Oracle R12
How To Migrate My Customized reports & Forms To R12?
How To Migrate My Customized reports & Forms To R12?
Regard
Helios

Calling Custom Form from Another Form

Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
Shankar

Hi ,
I found similiar solution on another forum as below.
http://it.toolbox.com/blogs/apps-traction-blog/how-to-create-a-zoom-using-oracle-form-personalization-12081
This works fine for the Purchasing form and allows me to zoom to the Supplier form.
But in my case, I want to zoom from the Supplier Form to my CUSTOM form. I replicated the exact steps as per the link.
However, it does NOT work as expected. It gets up to the ENTER QUERY mode in my CUSTOM form and remains in Enter Query mode. If I manually then Press key F11 to execute the query it brings back all records.
Do I need to do anything special in my CUSTOM form to make it behave in a similiar way to the Supplier Form ?
Thanks
Shanky

How to close a custom form from CUSTOM.pll

Dear Friends,
We need your help on the following issue related to Oracle Apps Forms.
We have a requirement to show a popup message (message should remain open and user should be able to continue working in the order entry form. User use this message as a reference while entering order details) when user enters a customer name or number in the order entry form . This is similar to the Stock Availability form which gets opened automatically when control enters into Order Entry Lines form, where the stock availability form remains open while entering line details.
To fullfil the requirement, we have designed a custom form with a single text field in which the message text (some customer information) will be shown.
We are using custom.pll to call this custom form (thru FND_FUNCTION.EXECUTE) when the control leaves customer number field. User could leave this custom form open and continue with entering order details. Till this point we could achieve what we want. i.e. we could show the popup message in the custom form after user enters a customer number.
The problem is, after the custom form is opened, when we enter a new order for different customer, we need to close the custom form (which is opened for the previous customer) if the customer is not qualified.
we could not achieve this. We tried using CLOSE_FORM, CLOSE_WINDOW, but did not help.
Any body have any suggestions on achieving this... Basically, we need your help to know how we can close the custom form from CUSTOM.pll.
Thanks,
Uma

I thing you haven't any (supported) option to close a form via custom.pll.
For a long time, we have search a solution for the same problem without any result.

FRM-10242: Cannot call linked-in Forms from Form Builder. error

FRM-10242: Cannot call linked-in Forms from Form Builder.
Cause: The menu designer specified a call to linked-in Forms from within Form Builder.
Action: Notify your DBA.
does anyone know why this happens.
I have this main-menu.. and when i click on one of the submenus which should call the form....i get this error.

Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
I am using 12.1.1 on Windows Server 2008.
Any help or guidelines is greatly appreciated.
Santhosh.

I cannot forward or send emails from my ipod this has just recently happened. Used to work before ok

i cannot forward or send emails from my ipod this has just recently happened. Used to work before ok

Do you have more than one mail account on the iPod? For out-going mail, the Mail app will first use the outgoing server associated with the account and then go to the out-goings servers for other accounts. To check go to Settings>Mail..>Outgoing Mail Server SMTP. Some providers do not allow mail to be send for other than the from that providers mail address. (e.h.,can' send AOL mail via a Hotmail outgoing server).
To me is sounds ilke the APL outgoing server is not on line. Also try resetting the iPod, nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

How to close custom form from standard form.

Hi,
I have the following requirement which I can not handle.
I open custom form from menu special position which is available in standard form on particular window and block only. So custom form may be open only when the window of standard from is open.
My requirement is to close custom form when the window of standard form is closing or when standard form is closing. I can not modifiy stanard form so I need to use forms personalization. I have problem in form personalization:
1) to handle "when-form-exit" event / trigger (when window closing I can handle by when "new item instance" where cursor goes and appropriate conditions).
2) to navigate to my custom form to close it, like "go_form" in Forms Builder.
Is it possible do achieve with forms personalization or maybe in some other way?
Kind regards,
Marcin

Hi,
The standard program is list of vendors address(AQZZ/SAPQUERY/FKF1============)or we can also access through the :sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Regards,
naresh

Cannot remove Exchange 2010

We installed Exchange 2010 on a Windows 2012 server and now we cannot uninstall it. When I try to run setup.exe to get options to remove it I get "ExSetupUI.exe has stopped working" and I cannot continue. We never used the new Exchange
server and we just want to remove it from the domain. How can I accomplish this?

Tried the command line (actually was setup.com /mode:uninstall) and it got most of the way through but failed in the "Configuring Microsoft Exchange Server" section under "Hub Transport Server Role" and gave the error below.
[10/25/2014 23:32:17.0680] [1] The following 1 error(s) occurred during task execution:
[10/25/2014 23:32:17.0711] [1] 0. ErrorRecord: Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0711] [1] 0. ErrorRecord: Microsoft.PowerShell.Commands.ServiceCommandException: Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost
on computer '.'. ---> System.InvalidOperationException: Cannot start service MSExchangeServiceHost on computer '.'. ---> System.ComponentModel.Win32Exception: The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.PowerShell.Commands.ServiceOperationBaseCommand.DoStartService(ServiceController serviceController)
   --- End of inner exception stack trace ---
[10/25/2014 23:32:17.0727] [1] [ERROR] The following error was generated when "$error.Clear();
        if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
            restart-service MSExchangeServiceHost
        " was run: "Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.".
[10/25/2014 23:32:17.0727] [1] [ERROR] Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0727] [1] [ERROR] Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0727] [1] [ERROR] The service cannot be started, either because it is disabled or because it has no enabled devices associated with it
[10/25/2014 23:32:17.0727] [1] [ERROR-REFERENCE] Id=BridgeheadRoleSetterComponent___115c1108e99e4560bd2c03c0fec99908 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10/25/2014 23:32:17.0727] [1] Setup is stopping now because of one or more critical errors.
[10/25/2014 23:32:17.0727] [1] Finished executing component tasks.
[10/25/2014 23:32:17.0743] [1] Ending processing Install-BridgeheadRole
[10/25/2014 23:32:17.0743] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[10/25/2014 23:32:17.0758] [0] End of Setup
[10/25/2014 23:32:17.0758] [0] **********************************************

Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation

I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
Error:
The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
-Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
-Confirmed no GPO exists in our domain to restrict this
Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
believe. I get no unsupported error just this incredibly frustrating error.
Any ideas?

What you are doing is totally unsupported:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Cannot install Exchange 2010 on Win Server 2k8R2

I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.

Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

Cannot install Exchange 2010 after installing Exchange 2013

Hi,
I have the current setup as explained below.
Exchange 2010 SP3 Version 14.3 (Build 123.4)
I installed Exchange 2013 as well to the setup. After installation everything was fine, but my backup solution was not as good enough to support Ex2013. So, I had to roll back. I uninstalled Ex 2013.
On the new server (on which I actually installed EX 2013) I tried installing Ex 2010 but it failed. But, when I execute Get-ExchangeVersion I get these two.
AdminDisplayVersion                     ExchangeVersion
Version 14.3 (Build 123.4)              0.1 (8.0.535.0)
Version 14.0 (Build 639.21)             0.1 (8.0.535.0)
The first one is the live Exchange 2010 ( The first one which we had). When I try to run the setup, I am getting the following Error.
Error:
The following error was generated when "$error.Clear(); get-OfflineAddressBook -DomainController $RoleDomainController | where { $_.IsDefault } | Enable-OabWebDistribution" was run: "Object is read only because it was created by a future version
of Microsoft Exchange: 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).".
What can I do now? My intention is just to create another Exchange Server for redundancy. I only have one EXchange server now. I tried installing EX 2013, and it seems not suit me because of backup issue. What I have in my mind is to get 2 Ex 2010 Servers.
Should I try uninstalling EX 2010 and installing it from the beginning on the new EX Server?
Thanks

Hi Steve,
I have the same situation, On a new server (on which I actually installed EX 2013) I tried installing Ex 2010.
In the Client Access Role install setup, I getting:
Error:
the following error was generated when "$error.Clear(); get-OfflineAddressBook -DomainController $RoleDomainController | where {$_.IsDefault} | Enable-OabWebDistribution" was run: "Object is read only because it was created by a future version of Microsoft
Exchange: 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0)
Admin Display Version
server 1 version 14.3
server 2 version 14.0 (Client Access Role Error)
how can I resolve this error?
Thanks.
Regards.

List teamplate (template created on migrated custom list from SP 2010 to 2013) not appearing in Add an app section in SP 2013

We have migrated from SP 2010 to SP 2013. When we are trying to create list template from the migrated OOB custom list. List template successfully created but it is not appearing in Add an app section in SP 2013.

Please make sure you have activated "Team Collaboration Lists" feature under Site Features. Also check if the template in the list template gallery is published.

I cannot sync my contact groups from Outlook 2010 (Win 7) onto my iPad. Can anyone help please ?

I cannor sync my contact groups from Outlook 2010 (Win 7) onto my iPad. Can anyone help please ?

in Itunes, once you connect the iPad, do you see the 'info' tab? Tap that and scroll down and see if outlook is chosen as the place to sync contacts from. If not, check it and sync and see if your contacts move over.

Calling custom form from another custom form giving problem

Hi
my requirement is when i am populating value in one form field from LOV ,
i wrote when-validate-item trgger
this trigger calls in turn another form for approval
so i use the following command in trigger
DECLARE
-- variable added by deepak on 16-05-2006 starts here
     --to make PROF_description enterable
     L_PROF_TERM_WARNING_AMNT NUMBER;
     L_PROF_TERM_AMNT NUMBER;
     L_PROF_DEPOSIT_PAID NUMBER;
     L_AUTORIZATION VARCHAR2(1);
     --variable added by deepak on 16-05-2006 ends here
     --code added by deepak on 16-05-2006 starts here
     BEGIN
                    BEGIN
                         SELECT PROF_TERM_WARNING_AMNT ,PROF_TERM_AMNT ,PROF_DEPOSIT_PAID ,AUTORIZATION
                         INTO L_PROF_TERM_WARNING_AMNT,L_PROF_TERM_AMNT,L_PROF_DEPOSIT_PAID,L_AUTORIZATION
                         FROM XXPOS_CUSTOMER_PROFILES_GTB XCP
                         WHERE XCP.PROF_DESCRIPTION = :POSTPAID_DET.PROF_DESCRIPTION;
                    END;
                    BEGIN
                    IF L_AUTORIZATION ='Y' THEN
                         :GLOBAL.auth_user_id := NULL;
                         FND_FUNCTION.EXECUTE( FUNCTION_NAME=>'XXAUTHSC',
OPEN_FLAG=>'Y',
SESSION_FLAG=>'NO_SESSION',
OTHER_PARAMS=>NULL,
ACTIVATE_FLAG=>'ACTIVATE',
BROWSER_TARGET=>NULL);
                    IF :GLOBAL.auth_user_id is not null THEN
                         :POSTPAID_DET.PROF_TERM_WARNING_AMNT := L_PROF_TERM_WARNING_AMNT ;
                    :POSTPAID_DET.PROF_TERM_AMNT := L_PROF_TERM_AMNT ;
                    :POSTPAID_DET.PROF_DEPOSIT_PAID := L_PROF_DEPOSIT_PAID ;
                    ELSE
                         RAISE Form_Trigger_Failure;
                    END IF;
                    ELSE
                    :POSTPAID_DET.PROF_TERM_WARNING_AMNT := L_PROF_TERM_WARNING_AMNT ;
                    :POSTPAID_DET.PROF_TERM_AMNT := L_PROF_TERM_AMNT ;
                    :POSTPAID_DET.PROF_DEPOSIT_PAID := L_PROF_DEPOSIT_PAID ;
                    END IF;
                    END;
          END;
but while running it is giving error:
it is not popup the desired second window and displaying following error
Illegalrestricted procedure OPEN_FORM in when-validate-item trigger
IF anyone has any idea on this, it will bw highly appreciated.
regards
deepak

You can use a timer in your when-validate-item trigger. In the when-timer-expire trigger you can call the procedure open_form

Error while saving custom form in SP 2010

Hi,
Iam Getting the below error, while trying to save a SharePoint list item using custom visual webpart. But the data is getting saved only error pop ups. Please help me
to solve this problem

As per the error, you may be using an SPWeb object which has been disposed already.
I am not sure how you are calling SPWeb object, i can only guess that you are using an Using statement within your code and could be disposing SPContext object, if so, try refactoring your code.
if would be better if you can put your code in this forum to suggest.
Anyways, you can refer here some of these links to get an idea.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/383931c6-3724-40ff-8ae8-7f26d6db1c92/trying-to-use-an-spweb-object-that-has-been-closed-or-disposed-and-is-no-longer-valid?forum=sharepointadminprevious
http://sharepoint.stackexchange.com/questions/32154/trying-to-use-an-spweb-object-that-has-been-closed-or-disposed-and-is-no-longer
http://sharepoint.stackexchange.com/questions/74843/error-trying-to-use-an-spweb-object-that-has-been-closed-or-disposed
http://msdn.microsoft.com/en-us/library/aa973248(v=office.12).aspx
see this blog and links refered -
http://blogs.technet.com/b/stefan_gossner/archive/2008/12/05/disposing-spweb-and-spsite-objects.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Cannot forward Exchange Custom Form from Exchange 2010

Similar Messages

Maybe you are looking for