Cannot get my download of LR6 (upgrade) to open. None of the solutions offered here work (re-install, exit CC, etc.)
I have been trying for about 24 hours now to get my download of LR6 to open after install. I have tried all the solutions found here including the sign-out - sign-in solution, as well as uninstalling and re-installing, turning off firewall, etc., etc. Still no go. This is not only frustrating but getting me close to calling up for a refund, and I'll stick with LR 5. By the way, I also can't get the the LR CC to download and function through the CC Desktop app even though I have the Photo subscription. It's a complete fail from my point of view. I'm asking Adobe support to come up with an analysis of why their own software installer won't work!
Hi there,
Please try the steps here - https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
^Ani
Similar Messages
-
I have an IPhone 5c; the screen and buttons are not working and the display is just black. If i charge it it does nothing except buzz repeatedly. There is so water damage nor have i dropped it. Help?
You go to www.cloud.com, log in with the same Apple ID & password that you used for iCloud/Find My iPhone on the device, go to the Find My iPhone section, and remove it from the account.
-
I am really struggling to like this upgrade, but the screensaver problems are so disappointing...I have tried most of the suggested solutions but the outsized photo problem still persists on my ipad. Pretty close to a deal breaker! Please fix this, Apple. I really wish I had not upgraded...can it be undone? I really dislike the camera roll, too : (
No one from Apple monitors these forums, so it isn't the place to voice complaints or suggestions. Go here:
http://www.apple.com/feedback/ipad.html
It's the best place to make complaints, recommendations, or just mention stuff.
There's a screensaver with iOS? I don't think so. -
Cannot get Adobe Download Manager to work
I'm currently running Acrobat 7 and cannot download a trail copy of Acrobat 8 Professional.
I downloaded the Download Manager when the pop up prompted me to. When I click the odwnload now button, it always loops me back to a window titled "Resume your Adobe download". I cannot get past this window.
I am not sure that the download manager installed correctly. I cannot find it under control panel in order to delete and resinstall it. I have been prompted again (since installing it) to install it again and again and again....
Help!!!!!!!!!!The amazing part is that when you go to the trial version, the downloads work just fine so now I'm running the trial version. I suspect that Adobe has internal
IT problems and that a house cleaning is needed in order to set things straight again. My purchase version will NOT
download, not matter what net browser or security setting is applied. These download issues are now so serious that a simple search of the 'net brings up numerous complaints about the same topic. Not good for Adobe. -
I purchased a movie in my iPhone 5 but cannot get it downloaded to my iPad. I just get an error saying it can't download. No further info from the error message
Hi Jlhall88,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iTunes Store: Movie rental frequently asked questions (FAQ)
Can I play my rental on more than one device?
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
You can delete the movie prior to the expiration date if you want to make more space on your hard drive, iPod, iPhone, iPad, or Apple TV. However, the movie will automatically disappear from your iTunes library 24 (or 48) hours after you've begun viewing it.
What happens to my rented movie if don't watch it?
If you don't watch your rented movie, it will expire in 30 days and disappear from your iTunes library. You will need to rent it again in order to watch it.
I hope this information helps ....
Have a great day!
- Judy -
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8 (this is a 2 x 3Dual-Core Intel Xeon machine).
Firmware = MP11.005C.B08 (EFI 1.2) 1.7f10 (SMC 1.1)
Will it not run the 64 bit kernel?
Is there a firmware upgrade to allow this?
Should I bother?
It won't boot with the Key 6 & 4 method.
or using Terminal command;
sudo systemsetup -setkernelbootarchitecture x86_64
Any suggestions?
Thanks in advance...
EricBecause it can't and doesn't have a 64-bit supported firmware.
UEFI (EFI64) was not finalized and adopted until very late 2007 and introduced in 2008, by Apple, Intel, other members of EFI Group and Unified EFI. The Mac Pro Mid-2010 was the first time though that 64-bit mode was the default.
Does it matter? not really. you can't install 48GB RAM anyway, while there are some improvements from 64-bit kernal.
Also can't boot Windows 7 64-bit DVD to install properly. But you can run Windows 64-bit kernel because you have a 64-bit Xeon.
Macs that use 64-bit kernel
64-bit kernel mode Snow Leopard
Booting with 32-bit or 64-bit kernel
Mac OS X- 64-bit kernel questions
http://macperformanceguide.com/SnowLeopard-64bit.html -
I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?
Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.
-
I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?
I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.
-
Can't add albums in library to iPhone.
Full question: I have several albums in my library that I cannot get onto my device. I have tried manually adding the albums, but it doesn't work. I can view the albums in "Music," but when I click on "iPhone" they are gone. How can I transfer them over?
-
icloud was originally set up wrong and I cannot get in to change my settings and no longer know the password
Go to http://appleid.apple.com and click 'Forgot password'. Enter the ID you set iCloud up with. A new password will be sent to your associated email address.
-
I cannot get my iPhone3 to sync playlists. If I create the play list on my iPhone, when I sync the playlist is deleted. If I create te playlist on iTunes, when I sync, it will not transfer to my iPhone. Help!
Hello jmazumba
Continue your troubleshooting with the article below to resolve the issue with connecting to iTunes. It will walk you through checking the drivers as well as third party security software for any conflicts.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
We cannot get our iPad Air to charge. We have tried the wall plug and the computer plug in. It just gives a message saying it's not charging.
Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
i just got a new 3rd Gen Ipad and I cannot get set up.I am using my Iphone4g hotspot and it is on and working.The Iphone comes up as the network and when u touch the arrow a new page comes with some stuff I don't understand
Thank you.What does the page say? What do you need help with?
-
hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
After upgrade to ios5, none of the apps will load. Touching an icon does not open the app; it just blinks and returns to the screen.
Go to the App Stor and download an app- any free app will do, it doesn't matter.
Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
And no, you don't have to keep that free one you just downloaded. You can delete it if you don't want it.
Maybe you are looking for
-
How to control my MacBook Pro with my iPhone ?
I do wanna know how to control my Macbook pro just with my iPhone, please
-
How Can i set up a folder to file similar apps in?
I want to categorise my apps into folders Is there a way to do this?
-
Where to store the password data for exiting user in Elgamal Algorithm
hi, i am doing a project in Intelligent security in java using Elagamal algorithm. The feature of Elgamal is that the password is not stored in database . Then where is the password is stored to check for a existing user . If i am an existing user th
-
Server Error on My Verizon sign in page
We are getting server error message when we try to go to sign in page here in Baltimore!
-
Trying to run java class files from my jsp
I am having difficulty running java files from my jsp. I have compiled my two java classes and inserted them onto my server in the webapps/WEB-INF/classes/scripting directory and have imported scripting.* into my jsp page. The files both compiled ok