Cannot launch vivado simulator 2015.1: behav/compile.bat' script "Please check that the file has the correct 'read/write/execute' permissions"

Hi,
I'm trying to run a verilog simulation using the vivado simulator 2015.1 on Windows 7.
I get the following error when I attempt to launch simulation:    
ERROR: [USF-XSim-62] 'compile' step failed with error(s) while executing 'D:/projects/axi/axi_test_system/axi_test_system.sim/sim_1/behav/compile.bat' script. Please check that the file has the correct 'read/write/execute' permissions and the Tcl console output for any other possible errors or warnings.
The tcl console repeats the same message, "Please check that the file has the correct 'read/write/execute' permissions"
I cannot find any problem with the permissions.  I believe that windows will always execute a .bat file.   Within the same project, I can run elaboration, synthesis and implementation without problems. 
Any idea why the simulation compile script won't run?
Thanks,
Ed

Hi,
Thanks very much for your detailed reply. These were the right questions based upon what I told you.   
However, I took the code home last night and ran it on my webpack 2014.2 release.   It still failed, but I got completely different error messages.   These messages correctly pointed me to an undeclared signal in my testbench. Once fixed, the compile worked and the simulator launched. 
This morning, I fixed the signal name in my 2015.1 setup, and it also compiled and launched correctly. 
So, the problem wasn't actually related to file permissions.  It seems like the 2015.1 error message may be broken compared to 2014.2.  
I was running the Vivado GUI, clicking on "Simulate > Run Behavioral Simulation"
Thanks again for your help. 
Regards,
Ed  
  

Similar Messages

  • How can I add .m4r files (thatI have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes ans it won't let me drag the files to the sidebar...

    How can I add .m4r files (that I have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes and it won't let me drag the files to the sidebar...thanks!

    How can I add .m4r files (that I have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes and it won't let me drag the files to the sidebar...thanks!

  • While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

    While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again.  Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
    Thanks
    phil

    I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

  • I had a system crash(with Vista).I cannot start up windows on that drive.I have Win 7 on a new drive.I can access the files on the old drive to copy them.I would like to know how to find and copy the bookmarks from Firefox on the old drive and copy to the

    Hi:
    I had a system crash and I cannot start windows (Vista)on it.I have a new drive running Win 7.How do I copy the files from the old drive's files to the new?The Bookmark files that is.
    Thanks.Any help is appreciated.
    Shaun

    This could help.
    http://support.mozilla.com/en-US/kb/Backing+up+your+information
    Basically, you have to copy your profile from the old hdd to the new one.

  • I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

    I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Cannot open the file because the open options are incorrect

    I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
    i //CODE BELOW
    i //allows the user to select an folder full of images
    b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
    b var fileList = inputFolder.getFiles();
    b var tempRef = app.open(tempName);
    b for (var i = 0; i < fileList.length; i++)
    b {
    b var tempName = fileList[i];
    b var tempStringName = fileList[i].toString();
    i //used to check if the file in the directory does in fact contain the .png extension
    b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
    b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
    b {
    i //setting reference to opened docuement PNG file
    i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
    b var tempRef = app.open(tempName);
    i //setting a tempName variable to the PNG file name
    b var tempName = app.activeDocument.name;
    i //setting reference to the active layer in the file
    b var graphicLayer = app.activeDocument.activeLayer;
    i //setting the PNG layer name to the PNG file
    b tempRef.layers[0].name = tempName;
    i //duplicating the image onto the opened Photoshop file
    b tempRef.layers[0].duplicate(backRef);
    i //closing the original PNG file without saving
    b tempRef.close(SaveOptions.DONOTSAVECHANGES);
    b }
    b }

    It looks as if the folder contains non Photoshop files, one way around the problem would be to change
    var fileList = inputFolder.getFiles();
    To specify the file types you want to process IE:
    var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

  • I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

    I get this message when I am trying to save a file that was done in CS4, now using  CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

    Then you need to outline all text before savng the PDF.
    Make sure you do this on a copy of the file.

  • Excel cannot open the file because the file format or file extension is not valid

    pls help 

    Hi,
    In regarding of the issue, please provide us more information to assist you better.
    Which Office version are you using? Office 2013 or other.
    Did the issue occur with the special file or every file?
    Then, based on your error message, this problem has been confirmed to be caused by malware on the affected machine. There are now two known variants of malware which causes this problem: Win32/Crilock.A and
    Win32/Buma!rts. They have both been identified as a new family of ransomware.
    In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx). If infected, Safety Scanner should clean the virus from
    the system, however it will not repair corrupted files. You will still need to restore those from a backup. A detailed analysis of affected files submitted to Microsoft for investigation has revealed the files are encrypted with a private
    and public key. The files cannot be recovered without the private key, which is more than likely held by the attacker. The premise of ransomware is such that if a person pays the ransom the key is provided to "unlock" the files.
    For more detail information, please refer to the following link:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
    Office programs.

  • Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

    Hi,
    I have a excel file that I have been using since beginning of year.
    Yesterday, I tried to open it but a message comes out "
    Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
    After I click yes, the page is blank. The file is about 400kb in size.
    I have try open and repair and third party repair program and not working also.
    I would appreciate a lot if you can help me.
    Thank you very much.

    Per your post, this problem might be caused by malware on the affected machine.
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
    In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
    If this is not the case, feel free to post back and let me know. Thanks.
    Tony Chen
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • TMS cannot open the file on the different host

    Hi!
    I have very simple scenario: 2 Systems (DEV and PRD) on the different hosts which should be configured in the TMS.
    I have done the following:
    - I have changed the DIR_TRANS-parameter on the PRD-host and gave him the value of the DEV in the instance-profile. Unfottunately the error appiers "this folder does not exist"
    If I do the transport group check I see the red points. This means I cannot open the file on the different host (e.g. from DEV on the PRD and opposite).
    Should I set users manually or share the folder or something like this to give access for the TMS?
    Thank you!
    regardss

    Thank you Eugene, I could open the document by changing it's name
    Greetings
    Pall Jokull
    Reykjavik, Iceland
    2009/4/11 Eugene Tyson <[email protected]>
    rename the file so that there are not two "dots" in it.
    >
    you have ".2008.indd"
    >

  • Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

    Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
    How do I fix this?

    That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
    Regards.

  • Error: Cannot retrieve EPM addin, please check that is not disabled by Excel

    Hi all,
    I have a problem in BPC 10.0 with the EPM Office Add-in Excel.
    In a system (for example, development system) it goes on without problem, in another one (for example, production system) an error occurs: Cannot retrieve EPM addin, please check that is not disabled by Excel.
    Why is there this difference?
    Thanks,
    Laura

    Hi Laura
    please follow the below steps.
    If the EPM add-in has been deactivated, you can re-activate it.
    In Microsoft Office Excel 2007,click the Office button, then click the Excel Options button.
    In the Excel Options dialog box,select Add-Ins.
    Select Disabled Items from the Manage dropdown list and click the Go button.
    In the Disabled Items dialog box,select the SAP BusinessObjects EPM Solutions, add-in for Microsoft Office and click the Enable button.
    Click the Close button.
    In Microsoft Office Excel 2010,click the File->Options->Add-Ins.
    In the Inactive Application Add-ins area, select "EPM add-in for Microsoft Office".
    In the Manage dropdown list,select “COM Add-Ins”.
    Click "EPM Add-In for Microsoft Office" in the dialog box that appears.
    Thanks,
    Vengal.

  • Windows Media Player cannot play the file because the required video codec is not installed on your computer

    I can not find solution to the issue "Windows Media Player cannot play the file because the required video codec is not installed on your computer" while attempting to play the file with *.wmv extension. Some computer fail in spite of said missing codec
    being present according the windrows media player in Windows 7 box

    If Rashid's link does not resolve it... consider the below:
    A)  As of this writing, the codec for GoToMeeting webinar recordings ("G2M4" codec) was only mentioned in *one* web page, of about 10 Microsoft web pages I read, to resolve this problem (and that codec is not included, yet, in their diagnostic tool),
    so if you're trying to play a GoToMeeting webinar, simply get the codec for it from their site:  http://www.GoToMeeting.com/codec
    B)  If Windows Media Player (WMP) will not even open the file, you won't be able to get the 4-character codec's name (like "G2M4") from WMP.  But VLC's media player will tell you that code, even when it fails to run the video.... and then you can
    search the internet for it. 
    C)  The problem sometimes is not actually a missing codec.  Other things that have helped others, some from: 
    http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/the-windows-media-player-12-could-not-play-the-wma/bb823460-44df-4e8d-ba2c-42ec0e111e5a?page=3
    (1) running the System File Checker (SFC.exe),
    (2) opening WMP first (running both the 32-bit and 64-bit versions) then opening the file from inside them,
    (3) confirming that WMP was the file association for WMV files,  
    (4) Control Panel -> Hardware and Sound -> Sound, selecting my audio device, and looking for a "5.1" setting (I didn't have one), to change to "stereo",
    (5) checking Tools\Options\Devices\Speakers\Properties\Speaker Properties\AdvancedPlayback\ Speakers /HP\Properties\Advanced\Default Format, to select "CD or DVD Quality" (if that setting appears for your device),
    Good luck,
    -- Doug
    Doug Ivison

  • I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid".  What does this mean and how do I correct it ?

    I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid".  What does this mean and how do I correct it ?

    There are numerous thread about the same matter in this forum
    I hope you'll find your answer
    https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

Maybe you are looking for