Cannot load jvm.dll

I have installed j2sdk 1.4.2, on windows ME. it seems to have installed ok, but when i try to run it, i just get a message saying "cannot load jvm.dll" Any suggestions?

I have installed j2sdk 1.4.2, on windows ME. it seems
to have installed ok, but when i try to run it, i just
get a message saying "cannot load jvm.dll" Any
suggestions?Are you using NetBeans?
If yes, look here:
http://forum.java.sun.com/thread.jsp?forum=14&thread=434036

Similar Messages

IDE Cannot load jvm.dll - what fixes this?

Hi,
I have Sun One Community Edition installed.
I then installed Java web start again and now when I try and run Sun One Community Edition it return the following error:
IDE
Cannot load jvm.dll
Any suggestions as to where I can find information on this or what the fix is.
Why cant sun package 1 product, rather than having to install Sun ONE App Server, then find it dosnt work, then install J2EE to fix that, now find Sun One does not work...

Maybe an incompatible jvm.dll is now in the PATH? I've never used Sun One but it's one possibility...

"Cannot load jvm.dll" please help solve

Hello
I downloaded and installed the following onto windows 98 SE :
JavaSE installed @ C:\Program Files\Java\j2re1.4.2
Java2 SDK installed @ C:\Program Files\j2sdk_nb
NetBeans installed @ C:\Program Files\j2sdk_nb\netbeans3.5
When I start NetBeans using the desktop shortcut, I get IDE Alert "Cannot Load jvm.dll"
Can anyone explain to me what I have done wrong and what I have to do in order to put it right.
I found some stuff about editing 'paths to jvm.dll' but I have found 5 jvm.dll files... which one do I use?
C:\Program Files\j2sdk_nb\_jvm\jvm.dll
C:\Program Files\j2sdk_nb\_jvm\bin\classic\jvm.dll
C:\Program Files\j2sdk_nb\_jvm\bin\hotspot\jvm.dll
C:\Program Files\j2sdk_nb\_jvm\bin\server\jvm.dll
C:\Program Files\Java\j2re1.4.2\bin\client\jvm.dll
Can anyone help me get started getting started with Java?
Thank you

Hi
I have just been suffering with the same problem and managed to find a solution based on answers in these very forums
What worked for me was to add an entry into the ide.cfg file which told netbeans which folder my JDK was installed in.
All you need to do is add the following line into the config file (which is in the bin folder under wherever you installed NetBeans 3.5) and it should start up (obviously you will need to change the folder name to match wherever you have your Java development kit)
-jdkhome d:\JDK1.3
Hope this works as well for you as it did for me
Phil

Error Opening After Effects CS3 - cannot load AERes1.dll

Hello,
When I try to open After effects I get this Error "cannot load AERes1.DLL"
I tried to reinstall after effects and it didnt dfix the problem.
I uninstalled the entire Master collection CS3 and reinstalled and the problem didnt solve.
I could open After Effects in the past.
Any suggestions?

OK so this is how I solved the problem if anyone encounter it ever again...
Uninstalling and reinstalling the CS3 won't help.
The problem happens probably because of quicktime installed prior to the CS3 updates. I didnt try to remove quicktime. I formatted my PC and luckly I had an image of my c: drive from the time I installed the cs3 and prior to the time I installed Quicktime. So I made all Adobe Cs3 updates first and only than installed Quicktime.
Now After Effects works.
If anyone finds a way to solve this without formatting c: drive, let me know.
Ariel E.

Cannot Load OCI.Dll

Hello:
I just installed the 64-bit version of 11g Release 1 (11.1.0.6) on a server that is running 64-bit Windows 2003 Server.
The installation was successful and I checked using SQL Plus. I am able to log and execute queries. I am also able connect using SQL Developer.
However, when I tried to use SQL Navigator (version 6.1) or Toad 10.0, I get an error message "... Cannot load OCI.DLL".
When I tried to install another COTS product, it complains that it was unable to find Oracle Client and/or Oracle OLE Objects.
I was trying both the tasks on the server itself.
Any ideas on how I can resolve the issues?

I have the same problem: Oracle 11 R2 on Solaris x86-64 and Oracle client (11.1.0.7.0 x64, unfortunately, there's no client higher than that version.). After installing TOAD 10.1 i've checked client connection:
SOFTWARE\WOW6432NODE\ORACLE (Oracle Root)
ORACLE_HOME_NAME:
ORACLE_HOME: C:\app\User\oracle
ORACLE_SID:
NLS_LANG:
SQLPATH:
LOCAL:
C:\app\User\oracle\Bin exists.
C:\app\User\oracle\Bin is in PATH.
Client DLL: C:\app\User\oracle\Bin\oci.dll
Client Version: 11.1.0.7.0
Home is valid.
So, TOAD can see the client, but when i'm trying to connect it i got an error:
Cannot load OCI DLL: oci.dll
Any suggestions?

Download error cannot load the DLL (pdh dll)

I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)

Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833

Can't load jvm.dll

the following simple code can't load jvm.dll
at windows xp sp2 ,
jre-1_5_0_11
#include <jni.h>
#include <stdio.h>
int main() {
HINSTANCE hVM;
if((hVM = LoadLibray("C:\\Program Files\\Java\\jre1.5.0_11\\bin\clien\\jvm.dll"))==NULL){
printf("faild\n");
else
printf("succes\n");
return 0;
}

#include <iostream>
#include <stdlib.h>
#include <windows.h>
using namespace std;
int main(int argc, char *argv[])
HINSTANCE hVM;
char *path="C:\\Program Files\\Java\\jre1.5.0_11\\bin\client\\jvm.dll";
if((hVM = LoadLibrary(path))==NULL){
printf("Error : %d\n",GetLastError());
else{
printf("succes\n");
FreeLibrary(hVM);
return 0;
}

Toad Error - Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll

Hello All,
Help needed to fix this error.
We are getting the below error from Toad after fresh install on Windows 7 64 Bit.
Toad for Oracle Base
Version: 10.6.1.3
Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll
We are using the Oracle Instant Client (instantclient-basic-nt-11.2.0.2.0).
We are able to connect to the database from the command line successfully, but when we tried to launch the Toad and connect it we are getting the above error.
How do we fix this issue?
Thanks in advance.
Sandeep S

mseberg wrote:
So is this a Toad issue or an Oracle client issue?More like a general software or programming "issue". If Toad (or other program) is 32-bit, then loaded libraries (e.g. Oracle Client dll's) needs to be 32-bit.
I'm sure this is documented in requirements for Toad. See e.g. [url http://toadfororacle.com/servlet/KbServlet/download/4264-102-12585/10.6_ReleaseNotes.htm#SystemRequirements]Toad 10.6 Release notes.
Edited by: orafad on Aug 10, 2011 2:35 AM

Win2000 & 1.4.0 Beta2: Could not load jvm.dll

Question: How does 1.4 Beta2 find it's resources?
When trying to run Install Anywhere 4.5, I get the error message:
Can't launch executable.
Could not load jvm.dll
Try re-installing the Java VM and change the java VM used by the application
The call is
D:\Compiere2\jre\bin\java.exe -Xms16777216 -Xmx50331648 -noverify com.zerog.lax.LAX C:\\Temp\\I1003700413\\Windows\\CUpdate.lax C:\\Temp\\env.prop
OK, I have about 4 different SDKs installed and I heard that if you deinstall everything else and just install 1.4 Beta 2 - it supposetly works. This is not an option, if you try to install/upgrade an application where the user does not know that a VM is.
The environment:
JAVA_HOME is set to a 1.4.0 Beta 2 JRE and the PATH is also pointing to the \bin directory ... and in their server/client sub-directories is the jvm.dll
I guess, that some registry entry is used ... but where do I find that?

You're running Java2 from "D:\Compiere2\jre". Does the file "D:\Compiere2\jre\bin\hotspot\jvm.dll" exist? And is this the installation which is Java 1.4?
As far as where the registry entry is kept, it is in HKEY_LOCAL_MACHINE/Software/JavaSoft. However, this value only seems to be used when you run the java.exe which Sun install in the Windows system directory.

Cannot load OCI DLL: C:\oracle\product\10.2.0\db_1\bin\oci.dll

Hello,
my environment is:
MS Windows 2003 R2 SP2 Enterprise x64 Edition
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
and I want to use:
TOAD for Oracle Freeware - version 8.5.0.50 g (from Quest Software)
my "path" variable is as below:
C:\Documents and Settings\Administrator.SERVER2003>set path
Path=C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
At location "C:\oracle\product\10.2.0\db_1\bin\" I can see "oci.dll"
BUT... when I try to connect to my database... from TOAD... I get the message below.
Cannot load OCI DLL: C:\oracle\product\10.2.0\db_1\bin\oci.dll
Using "netca" or "sqlplus" I can connect to the database with success.
Help welcome!!!

Hummm....
this should be the cause.
I have Oracle Database 10g Release 10.2.0.1.0 - 64bit Production. Then all the executables including DLLs are 64-bit version compiled.
Now... I guess that the TOAD software is 32-bit application and it can not load 64-bit OCI.DLL.
Thanks to EVERYBODY evolved!!!
By the way:
The TOAD for Oracle Freeware - version 8.5.0.50 g (from Quest Software) is the latest version available from Quest Software.
Regards,

Cannot load OCI DLL: C:\oracle\product\11.1.0\db_1\BIN\oci.dll

Hi..
I tried connect to my oracle 11g using toad version 9.5.. but i got an error as below:-
Cannot load OCI DLL: C:\oracle\product\11.1.0\db_1\BIN\oci.dll
As your information.. this is my tnsnames.ora configuration:-
NV2DEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ASUS-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = NV2DEV)
Please help me...
Thank you,
Baharin

hi,
Guys, I installed Oracle 11g client because of the reported fix of System.Transactions issue known in 10g. I use PL/SQL developer, and it told me "Initialization error: Could not locate OCI dll", though the registry entry and ORAHOME folder it showed were Ok. It seems like PL/SQL developer was looking for OCI.dll not in the reported ORAHOME folder but in ORAHOME\bin folder. After copying all files (luckily, they are quite few) from ORAHOME root to bin PL/SQL developer began to work correctly.
from the following link
http://forums.oracle.com/forums/thread.jspa?threadID=620900
it will work for you
Thanks
Edited by: CKPT on Sep 27, 2010 12:52 PM

Cannot load psview.dll

I cannot start photoshop.
get a "cannot load psview.dll" error message
Message title was edited by: Brett N

OS Version and PS version???
On s Windows 7 64 bit system there should be two dlls with that name. Make sure it exists where it belongs.
Window 7 64 Bit system
"C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\PSViews.dll" 9/16/2012 7:15PM (2,358,360 bytes)
and
"C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\PSViews.dll" 9/16/2012 5:50pm (2,358,360 bytes)

Error loading jvm.dll

our company has an application that we use for company business that runs off Java. Lately, I have several users that can no longer launch the application. All are receiving the same error "The Java Runtime Environment cannot be loaded from <C:\PROGR~2\Oracle\JINITI~1.18\ bin\hotspot\jvm.dll> We are running IE 10, Window 7 and latest version of Java. I did however try to use an older version of Java to no avail. Any assistance will be greatly appreciated.

jvm.dll should be in the <java>\bin\classic directory.
If it's not, then I THINK there's something wrong with your java runtime environment (jre).
Is this something you installed yourself - the java - or was it soemthing dropped on yoour system by the Oracle product?
o former: Get a new jre.
o Latter: Get a new jre and/or complain to Oracle.

Failed to load JVM.dll

Hi
I am trying to upload report templates in 8.1.1.3, but getting below error.
SBL-EAI-05006: Failed to load the JVM Dll. Check that the specified dll name is correct.
Object manager error: ([0] Failed to load the JVM Dll. Check that the specified dll name is correct.(SBL-EAI-05006) (0x23138e))
SBL-OMS-00107: Object manager error: ([0] Failed to load the JVM Dll. Check that the specified dll name is correct.(SBL-EAI-05006) (0x23138e)).
And I tried to set JVM DLL Name in profile configuration for XMLPSubSys component, and tried with all JVM dll file location paths in our server enviornment.
also tried to find C:\PROGRA~1\Java\JDK15~1.0_0\jre\bin\server\jvm.dll unfortunately i didn't find this path.
Can any one share the solution how can I create or set the correct path for above error?
Thanks
Sean

Hi Sean,
if you cannot find the path C:\PROGRA~1\Java\JDK15~1.0_0\jre\bin\server\jvm.dll manually, then it's clear that Siebel can also not find it.
Make sure you have a supported JRE or JDK installed on your machine or on the Siebel server, and that the path is correct.
In case of Siebel Web Client:
* Java needs to be installed on the Siebel server
* The DLL property of the named subsystem you mentioned must point directly to the jvm.dll file (e.g. C:\Program Files\Java\jre6\bin\client\jvm.dll)
In case of Siebel Mobile/Developer Client:
* Java needs to be installed on the client
* The DLL property in the subsystem defined in the client's CFG file (e.g. siebel.cfg) must point directly to the jvm.dll file (e.g. C:\Program Files\Java\jre6\bin\client\jvm.dll)
Benny

Cannot Connect to Oracle, PHP cannot load oci dlls

Hello,
I have installed wamp on windows server, and oracle 9, When I try to connect to oracle in php I get:
Fatal error: Call to undefined function oci_connect() in C:\wamp\www\project2\index.php on line 3
Also when I start wamp, it cannot load the oci dlls found on:
C:\wamp\bin\php\php5.3.0\ext
I have configured the php.ini file and commented as much options
extension_dir = "C:/wamp/bin/php/php5.3.0/ext/"
extension=php_oci8.dll ; Use with Oracle 10gR2 Instant ...
extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
extension=php_oracle.dll
extension=oci8.so
I am unable to either connect to the database through php, also when I start wamp, i get pop up windows that it cannot load the dynamic procedures related to oracle: php_oce.dll, php_oce8.dll, php_pdo_oci,
I have even eddited the http.conf file
Also have done this:
•Add the following entries to the "C:\Apache\Apache\conf\httpd.conf" file:
LoadModule php4_module c:\php\sapi\php4apache.dll (approx line 193)
AddModule mod_php4.c (approx line 241)
AddType application/x-httpd-php .php (approx line 851)
I have included the phpinfofile attached as well, part of it below is:
System Windows NT SELECAO 5.2 build 3790 (Windows Server 2003 Standard Edition Service Pack 2) i586
Build Date Jun 29 2009 21:23:30
Compiler MSVC6 (Visual C++ 6.0)
Architecture x86
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path C:\WINDOWS
Loaded Configuration File C:\wamp\bin\php\php5.3.0\php.ini
Configuration
apache2handler
Apache Version Apache/2.2.11 (Win32) PHP/5.3.0
Apache API Version 20051115
Server Administrator admin@localhost
Hostname:Port localhost:80
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 5
Virtual Server No
Server Root C:/wamp/bin/apache/Apache2.2.11
Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_php5

I get this error, i decided to change directory for oracle_home
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1/bin");
to
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
it functioned.
my code
<?php
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
putenv("ORACLE_SID=PLSExtProc");
$user ="name"; // set user
$senha="password"; // set password
$banco="(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)
(HOST=127.0.0.1)(PORT=1521)
(CONNECT_DATA=(SERVICE_NAME=orcl))
)"; // configuracoes do banco (isso muda um pouco no oracle)
if ($conexao = OCILogon($user,$senha,$banco))
echo "Conexão bem sucedida.";
else
echo "Erro na conexão com o Oracle.";
?>

Cannot load jvm.dll

Similar Messages

Maybe you are looking for