Cannot modify Data Connection in Infopath form as the original webservice server no longer exists

Hi,
I am going to modify one of the data connections in my infopath form, but it throws me an error. The original server no longer exists. I know that I can change the manifest.xsf and replace the old server with the new server name. And when I pulled up the
Data Connections list, I can see all the connection sources have been changed to the new server. But I am still getting this error:
Could not open "http://<oldeserver>/<webservices.asmx>?WSLD
I don't seems to see a reference to the webservices.asmx, where will that be?
Please advice. Your help would be greatly appreciated!
Where is this reference came from?

I think I found out where the reference is, it is actually in the udcx file. It is weird though, the one on Central admin has been updated with the new server name, but not the one in the local data connection library, and it is actually referencing the
local data connection library instead of the one in Central Admin.
Thanks.

Similar Messages

FTPEx: 425 Cannot open data connection

Hi,
I am connecting to FTP servers using File Adapter (FTP Protocol). Adapters are running fine. But after couple of hours. When I place a file in FTP folder. Adapter status turns into red and displays below error. I believe this is because of the connection fluctuations between PI and FTPs Server.
Is this the problem from PI or FTPs side? Do we have any SAP note or fix/patch which can take care of this issue? Thanks in Advance.
Adapter Error Message:-
An error occurred while connecting to the FTP server xyz.com:21. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 425 Cannot open data connection.'. For details, contact your FTP server vendor.

Hi All,
I have explained the settings suggested here to FTP team. They replied:
1. The timeout period is currently 120 seconds for control and 30 seconds for data:
2. Toggling Passive/Active can be an issue on its own for firewalls/SSL/NAT...
I am also facing below pasted adapter errors.
Error occurred while connecting to the FTP server "xyz.com:21": java.net.ConnectException: Connection timed out

Data connection, static PDF form, and presence

I've created a form with a dynamically populated dropdown of names. To get it populated, one step was to save it as a static PDF form. Then it worked perfectly. However, I soon found that my scripts to show hide elements no longer worked. Certain Action Builder actions still worked, but not show/hide. So I created a simple test form, and show/hide worked normally. I've tried both formcalc and javascript. So is it true that a form can be dynamic and all actions work or the form can be static and connect to a database, but a form cannot be both data-driven and change presence?

Thank you for this information, which may be true in theory, but my forms show that only the static form can show external data, and the static form can't change presence at runtime, although other actions (like reset all fields) will work. On the other hand, in a dynamic form, I can change presence, but data will not appear in the dynamic dropdown, which is grabbing names from SQL Server. Can you try an experiment yourself? Try a data connection and changing presence in the same form, and let me know what happens.

Referencing External Data in an InfoPath Form

Hi all,
I am using SharePoint 2013, Designer 2013 and InfoPath 2013.
I am working on a a system that allows us to book a field support analyst for a particular site at my company on a given day. I have built a custom list that holds all the data and an InfoPath Form form logging and editing requests and this works perfectly.
At Present the site location field is free text which means that we have the potential for two people to call the same site 2 different things. I toyed with the idea of having a separate list in SP with all the site locations on but we would need to keep updating
this as new offices are opened and closed, so I took the view that I would link the site into our external support system that is the master list for all offices. This is an SQL DB. I have been able to set up the External Content Type and successfully create
an External Read Only List in the Site Collection that is displaying all the info I want. I have even been able to create an InfoPath Form from this list for reviewing the full site information.
The next stage was to add a drop down list to the request page that looks up the site name in the External List and records the choice in the request list. I can create the column in the Request List that looks up the site name in the external list but I
can add this to my InfoPath form for editing.
I am so close but I cant get there...
Thanks in advance for your assistance.
Rich

Thanks for the reply. I am trying to call data from an external SQL DB but save it to an SP List. i.e. my site list is in SQL DB but the appointment is in an SP list

Retrieve Data from the Webservice through Data connection in Adobe Form

hi
i done Student ejb application
i.e, Create,Update,Retrieve,Delete operation. I create the WebServices to these operations. Present i connect the webservice through data connection . create operation is done successfully, but i dont know how to retrieve the the student details through data connection. how i can bind the retrieve values to the table in adobe form .how to bind from webservices to adobe form without context node.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

FTPEx: 425 Possible PASV port theft, cannot open data connection..

Hi All,
I am getting the below the error while comminicating to FTP server.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Possible PASV port theft, cannot open data connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Possible PASV port theft, cannot open data connection..
This error is random. Some times service is working is fine and some times its failed to process.
Can any one suggest me the peramnent solution for this.
Thanks & regards,
Kartikeya

Hi
The reason for the error is
The ip address (+port) is not same for both these operations
    - Control connection
    - Data Connection
Changing active/passive mode settings might help (as a common solution).
Problem can occur due to below settings,
   - FTP server/ Firewall on its side (affects Passive Mode)
   - FTP client/ Firewall on its side (affects Active Mode)
After Initial Control connection is made, the below happens for Data connection
When Active, the CLIENT opens a dynamic port for DC on which it would be listening, for the server to bind its source port
When Passive, the SERVER opens a dynamic port for DC on which it would be listening for the client to bind its source port
when the firewall on Server side does not have these ports open, you get the above error.
The error could be because of other reasons also, but I suspect that the dynamic port is out range of the ports opened at your FTP server firewall.
So now I think you are one step forward to fix the issue
Regards
Vishnu

You cannot save data typed into this form

Hi,
I created a small interactive form using transaction SFP and I included this form into a WDA application.
The data I am pushing from the system into the form is visualized, but there is also an error message stating:
You cannot save data typed into this form.
Please print your completed form if you would like a copy for your records.
At first I thought something was wrong with my credentials, but after requesting new credentials this message still appears.
Does anybody know what is causing this message and how I can fix it?
Thanks
Mario

Hi.
1. Are you able to generate an interactive form with the save option through a report program or by WDJ or were you able to view an interactive form by any means with your current credential configuration -> i am asking this coz eventhough you have the right credential, cases can be that it is not properly installed. (check out the standard WDA examples)
2. try using ZCI and xACF layouts. (for ZCI generate the scripts)
3 . Check if the form properties is set to interactive form.
4. Check if you have the generated xml in the interface of your form.
Hope you have checked these already.
Rgds,
Anto.

Why do some people get "you cannot save data typed into this form" using FormsCentral fillable PDF?

Hello. We're using FormsCentral extensively. We create the fillable PDF and send it to about 80 people. Each of them is adding content and saving and then passing on to another person for further content. Ultimately, all parties are happy with the content and submit. The problem is that some of the people open the PDF and get the message ""you cannot save data typed into this form". What is causing this? Please help as it is causing us many problems.

Thanks for the quick response. We distribute the form to 80 people who fill it out and create 80 versions. They then pass the form to one other person who edits. All 80 forms, once complete, are submitted to FormsCentral.
I think the problem is with Mac users. Is there anything unusual about the Mac with Adobe Reader? If you provide your email address, I can send you one of the filled out forms that is having this issue. It's quite odd in that the fillable fields don't show up until clicked on and the form is not saveable.
Thanks!

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Changing the Modified Date of a List Item using the SharePoint Client Object Model (C#) with Contribute Permission

I have a small snippet of code that I use to update the Modified Date of a list item and it works great for users with Full Control permissions. However, for users with just Contribute access to the site the code doesn't work. Instead, SharePoint
just updates the Modified Date to now.
I did some testing, and narrowed down the specific permission level that allows updating of Modified dates and oddly enough, it's the "Manage Permissions" level.
Has anyone run into this issue? If so, how do I work around this and update the Modified date as a user with only Contribute access to a site/library?
Here's the code:
DateTime Test = new DateTime(2012, 5, 4);
ListItem li = list.GetItemById(itemID);
li["Modified"] = Test;
li.Update();
ct.ExecuteQuery();
Thanks,
Max

Hello,
As a workaround you can pass admin credential in your code because as per my knowledge contributor can't update default columns like: created by, modified by, modified, created.
ClientContext clientContext = newClientContext(siteUrl);
ClientContext.Credentials = newNetworkCredential(UserName, Password, Domain);
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

I bought iphone 4s from us and upgrade it to IOS 5.01 and i cannot activate with etisalat sim as it requires the original carrier sim

i bought iphone 4s from us and upgrade it to IOS 5.01 and i cannot activate with etisalat sim as it requires the original carrier sim

The unlocked iPhone 4S did not go on sale in the US until 11/11, and then only through Apple.com in the US.
I don't know if it's available at retail yet, but I don't believe it is.
As you've been told, you purchase a phone locked to AT&T. You can NOT activate it or use it on any other network. AT&T does not unlock iPhones for any reason. Return it to the store you bought it from and get your money back.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

i have on my ipad2 and re-download it - but I can't afford to loose the presentation that I currently have ....??
Are you using Keynote on an iPad?
If so you posted in the wrong forum, this is the Keynote Mac discussion and it is a different application. I dont know how the iPad works at all, so I cant help you, post in the Keynote iOS discussion.
If you are using a Mac, the colours palette is accesed by clicking on the colour well (arrowed) and then selecting a colour chip or changing the color in the colour wheel.

Problem with data connection in adobe forms using wsdl file....

Hi Experts,
I am tryning to create a adobe form in which i need to create a data connection using a WSDL file. But i am coing across the problem as cannot find the path of th url.
i tried to create the WSDL in 2 ways and i came across the same error.:
1) using the URL of the WSDL file generated
2)alos saved the file as WSDL file on desktop, and used to create
in both cases i am coming across the same error.
Note: i am not creating using webdynpro, i am doing using ABAP.
Regards,
Madhu

@ankur17
Won't insult you by suggesting that you haven't already checked Settings > mobile network > Data connection = On, as you have confirmed already that Internet Sharing is working.
You may need to go to Settings > about > reset your phone and see if by setting up phone afresh it reads settings and applies correctly from SIM card.
Is Network Setup application included or available from Marketplace > Nokia Collection as might be worth running this application too?
If this issue still remains you may need to have device software re-installed at Nokia Care Point to try to resolve this.
Happy to have helped forum with a Support Ratio = 42.5

WSDL data connection error after Form Server xdp render

Hi
I have a wsdl data connection inside an xdp after I render the xdp as pdf and reader extend the form when I click on the button to execute the web service method a pop up box appears saying the data connection has no properties. I am using LiveCycle Forms and Reader Extensions 8.1.
Thanks

Hi Paul
Thanks for the reply.
Reader extensions wasn't the problem, it was how I was manipulating the xdp before rendering.
Thanks

How to create Data Connection in PDF forms??

Hi Experts,
I am working on PCR forms(Adobe forms), I want to customize those forms as per the requirement.
Problem is that I don't know how to create New Data Connection with the field in DATA VIEW.
Thanks
Rohit G

>
Rohit Gaharwar wrote:
> Hi Experts,
>
> I am working on PCR forms(Adobe forms), I want to customize those forms as per the requirement.
> Problem is that I don't know how to create New Data Connection with the field in DATA VIEW.
>
> Thanks
> Rohit G
Hi Rohit
are you working with interactive forms inside Web Dynpro? If so, Web Dynpro will create the data connection for you. The only thning you have to do is setting the "data sorurce" and "pdf source" in the properties tab of the interactive forms layout element. See for example here: Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]#50 [original link is broken] or other tutotials on web Dynpro and interactive forms : Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]
If you don't work with Web Dynpro, you can create a data connection as follows:
1. Open your *xdp-Template (Doubleclick: Lifecycle Designer is starting
2.Click on File-> New Data Connection.
3, Create the data Connection with the wizard, Your source can be
a) XML Schema
b) OLEDB Database
c) WSDL file
Hope this helps. Please reward points if helpful
Kind regards
Bettina
Edited by: Bettina Hepp on Jun 4, 2008 4:53 PM

Cannot modify Data Connection in Infopath form as the original webservice server no longer exists

Similar Messages

Maybe you are looking for