Cannot parse *.Config file. Ensure you have configured the 'paypal' section correctly.

I have added PayPal setting in web.config file and I can access paypay from my local.
I have copied that setting into web.debug.config and web.release.config but I can't access and I got the error from server.
May I know what could be the reason?
Cannot parse *.Config file. Ensure you have configured the 'paypal' section correctly.
<paypal>
<settings>
<add name="mode" value="sandbox" />
<add name="connectionTimeout" value="360000" />
<add name="requestRetries" value="1" />
<add name="clientId" value="xxx" />
<add name="clientSecret" value="ccc" />
</settings>
</paypal>

You can't add arbitrary application configuration to web.config, as that is used by Web API. Instead, add a configuration setting in the "app settings" section of the Configure tab in the portal.

Similar Messages

Is it possibe to get an adobe acrobat 6.0 pro setup file if you have misplaced the setup disk?

Is it possibe to get an adobe acrobat 6.0 pro setup file if you have misplaced the setup disk? I need to repair the software on my computer.

Hi Levi,
I am sorry to inform you that Adobe Acrobat 6.0 Pro is an outdated version, Adobe doesn't support it & the download link doesn't exist anymore.
Regards,
Aadesh

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

== ERROR: BUILDSCRIPT is undefined! Ensure you have updated...

I updated to the latest Pacman in testing, and when I tried to use makepkg, I got this:
==> ERROR: BUILDSCRIPT is undefined! Ensure you have updated /etc/makepkg.conf.
However, I have already checked and modified the configuration, look:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The FTP/HTTP download utility that makepkg should use to acquire sources
FTPAGENT="/usr/bin/wget --continue --passive-ftp --tries=3 --waitretry=3 --no-check-certificate"
#FTPAGENT="/usr/bin/snarf"
#FTPAGENT="/usr/bin/lftpget -c"
# ARCHITECTURE, COMPILE FLAGS
CARCH="i686"
CHOST="i686-pc-linux-gnu"
#-- Exclusive: will only run on i686
# -mtune builds exclusively for an architecture
# -mcpu optimizes for an architecture, but builds for the whole processor family
CFLAGS="-march=native -mtune=generic -O2 -pipe"
CXXFLAGS="-march=native -mtune=generic -O2 -pipe"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j1"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!fakeroot !distcc color !ccache)
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip !docs !libtool emptydirs)
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc and info directories
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
OPTIONS=(strip !docs libtool emptydirs)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Info and doc directories to remove (if option set correctly above)
DOC_DIRS=(usr/{,share/}{info,doc,gtk-doc} opt/gnome/{,share/}{info,doc,gtk-doc})
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
PKGDEST=/home/ltsmash/packages
#-- Source cache: specify a fixed directory where source files will be cached
SRCDEST=/home/ltsmash/sources
#-- Packager: name/email of the person or organization building packages
PACKAGER="LTSmash <[email protected]>"
# vim: set ft=sh ts=2 sw=2 et:
Any ideas?
Thanks in advance

ambalex wrote:no, after reinstaling there's no /etc/makepkg.conf.pacnew, and the /etc/makepkg.conf is the old one.
If pacman didn't install a *.pacnew version of the config file that means that your makepkg.conf is up to date or, in either case, the same as the default one installed by the package.
Here is the default makepkg.conf file for reference: http://rafb.net/p/5h2PWp94.html

PS CC: Camera Raw filter gives "cannot parse your files" error

Hi
I can open files fine in Photoshop CC, but if I try to use the Camera Raw filter, I get the "file format module cannot parse your files" error. This only happens with larger TIFFs, say 300 MB or so - 70 MB files work fine. I have a fast machine running Windows 7 with 12GB of RAM, so I would expect to have enough space, but maybe it isn't configured properly in PS preferences?
Thanks for any help,
Peter

siskin11 wrote:
Hi
I can open files fine in Photoshop CC, but if I try to use the Camera Raw filter, I get the "file format module cannot parse your files" error. This only happens with larger TIFFs, say 300 MB or so - 70 MB files work fine.
300MB Tiff seems like a large files size for a Tiff which leads me to believe its a layered Tiff. ACR does not have Layers support try opening the Tiff file in Photoshop not through ACR to see it there are layers. If there are target all of them and convert to a smart Object then try ACR as a filter. A smart object is a single layer in Photoshop.

Getting Error: Config file does not have IDStore WLS Administrator Username

I am configuring OIM/OAM in HA mode following the EDG:
- Enterprise Deployment Guide for Oracle Identity Management
- 11g Release 1 (11.1.1.5)
I am at step
- 10.4.5 Creating Users and Groups for Oracle WebLogic Server
I am executing this command:
- idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
Where wls.props has these values:
IDSTORE_HOST: admin.mycompany.com
IDSTORE_PORT: 389
IDSTORE_BINDDN: cn=orcladmin
IDSTORE_USERNAMEATTRIBUTE: cn
IDSTORE_LOGINATTRIBUTE: uid
IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
IDSTORE_SEARCHBASE: dc=lispa,dc=local
POLICYSTORE_SHARES_IDSTORE: true
and I am getting this error:
Config file does not have IDStore WLS Administrator Username
Any idea why ?

I have added to the property files:
IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
But its not solving the issue.
Here is the log:
Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
WARNING: Logger initialized in warning mode
Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
SEVERE: Config file does not have IDStore WLS Administrator Username
Please advise on how to resolve this issue

Grub uses wrong UUID and cannot create config file

I've tried performing an installation to a USB drive as per the wiki. Everything works up until I try to boot and grub tries to load the wrong UUID for my / filesystem.
My next step was to chroot back into the USB install and manually change the UUID to the correct one. Odd, as others have pointed out in this thread
the grub-mkconfig command should detect the correct UUID if run from within arch-chroot.
Anyway, after changing the UUID in /boot/grub/grub.cfg and trying to regenerate the config file with `grub-mkconfig -o /boot/grub/grub.cfg` I noticed the file had not changed. This is because the command is exiting successfully, but isn't actually writing any file. I deleted the file and tried the command again to be sure. No new file.
Next I booted into grub, using the config generated with the wrong UUID, and dropped to the shell using `c` -- I was able to load my install just fine using
set root=(hd0,gpt2)
linux /vmlinuz-linux root=/dev/sdb3 ro
initrd /initramfs-linux.img
boot
From there I tried removing the bad config file and recreating it using the `grub-mkconfig -o /boot/grub/grub.cfg` command... no dice. Does anyone know what is going on? At the least the command should tell me that it is failing, no?

Attached is the output of `grub-mkconfig` running from the chroot.
root@myhost# grub-mkconfig
Generating grub configuration file ...
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if loadfont unicode ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_archlinux ###

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

My iphoto library won't resume update. When I go to app storYou cannot update this software since you have not owned the major version of this software.

I tried to update my photo library a week ago, but I stopped it. Now that I wanted to resume updating, it says in the app store "You cannot update this software since you have not owned the major version of this software." WHAT DO I DO??

I already fixed mine, i used my other apple id to resume its update

TS3899 Cannot Get Mail The mail server is not responding. Verify that you have entered the correct account info in mail settings. What can I do?

When I try to access Mail I get the following message "Cannot Get Mail. The mail server is not responding. Verify that you have entered the correct account info in Mail Settings". I have entered the correct account details and even deleted them and re-entered them but to no avail, Help.

Try deleting the email account and readding it in the "other" tab instead of Yahoo/gmail, etc

HT2404 When I try to download free updates for apps, I've suddenly started getting an error message saying: You cannot update this software since you have not owned the major version of this software." But I do own the apps. And I haven't changed my ID

When I try to download free updates for apps, I've suddenly started getting an error message saying "You cannot update this software since you have not owned the major version of this software".
But I HAVE owned the software, for ages. (And, in any case, the apps in question are all free.)
And I don't have multiple Apple IDs.
What can I do?
Any advice much appreciated

This can occur if you bought the machine used and iLife was reinstalled with another AppleID.
This also can occur if the "free apps" you downloaded have paid upgraded versions and/or are now payware and you can't get updates.
All software from MAS is copy protected, it might be free as in "no charge" but it's not free in the sense you can share it with others.

HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

Hi kensb!
I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I cannot download exe files. I have no trouble downloading files with other extensions (ex: dta).

I have an HP Pavilion dm4-2070us computer running Windows 7. I have the same problem with internet explorer and with Firefox. The file seems to download but never finishes; it is not in my downloads folder.

Hello number1stat, try to temporarily disable your antivirus software and see if that helps, if it does not work then try the following. This can occur if you have customized your Internet Options Security settings for the Internet zone, if the option, "Launching applications and unsafe files" is set to "Disable". Method 1: Reset your Security settings for the Internet zone to the default level. Go to "Control Panel -> Internet Options" (or use "Start -> Run -> inetcpl.cpl -> OK" to open "Internet Properties") then click the Security tab, select the Internet zone and click "Default level" Method 2: Set a custom level for security in the Internet zone. Go to "Control Panel -> Internet Options -> Security (tab) -> Internet". If security is set to "High", or if you have customized the Internet zone settings, select "Custom level..." and change the single option, "Launching Applications and Unsafe Files" from 'Disable' to 'Prompt (recommended)'. If executable file downloads fail from certain sites but you are able to download exe files from other sites, check in "Internet Options -> Security - > Restricted sites -> Sites" to make sure that the problem site is not in the "Restricted sites" list, as the security level for that zone is High by default. Some Security software, including Spybot S&D, add known malware sites to that listing.

You cannot update this software as you have not owned a major version of this software? This is what I get when I try to update my apps on itunes.

You cannot update this software as you have not owned a major version of this software? This is what I get when I try to update my apps on itunes. What does this mean..I have been having trouble..and reached out but they seem to not understand the problem.. No one has been able to help..It is like I don't have my past history with them anymore? I don't have my past purchases either.

Same here. Just becoming a nightmare. Updated iTunes and now can't update apps it itself is showing as available updates. Count me in on the latest "You can not update this software since you have not owned the major version of this software." bug.
Next I have to post about a new problem in iPhoto on a new thread.... it lost the "link" between some but not all photos I have in the library and what it itself posted to FaceBook a few hours ago...
Incredibly frustrating.
Imran

Applications problem: "You cannot update this software since you have not owned the major version of this software."

Hi all,
RE: Applications problem: "You cannot update this software since you have not owned the major version of this software."
Until recently, I have not encountered this problem. And I am facing this problem for both my iPad and iPhone.
I only have 1 iTunes account and the most recent change was that I switched the location from Singapore to UK (I'm currently in the UK). I also updated my applications a couple of times before since the change in location, so I doubt it's due to the location change. I've tried signing out of the account in the iTunes accounts on the devices, then signing back in. I've also tried restarting the devices (and for the iPad, I even updated the iOS).
Any idea what else I can do to try to rectify this?
Thanks and regards,
Tammy

Hi there!
Thanks for replying!
1. Yup, my iOS is the latest (6.0.1), and I have 7 apps on my iPhone that apparently have updates. But it's been 6.0.1 for quite some time and I've also been able to update the apps till just this week.
2. I don't have a credit card associated with my account anymore. Ever since I changed the location, I removed the credit card details. But I didn't have problems with any of my apps (updating or downloading new ones) until this week. Also, all the apps I've downloaded since I came to the UK are free apps.
I still don't know what's wrong.

Cannot parse *.Config file. Ensure you have configured the 'paypal' section correctly.

Similar Messages

Maybe you are looking for