Can we generate a dummy request from a backend process?

I would want to generate a dummy request from a backend process since I need to use the 'process instanace key' which will be associated with it. The 'process instance key' is vital for my requirement since we need to trigger a process task in OIM.
Is it possible to create a 'dummy' request?

Hi,
You can use HTTP Binding for that... Have a look at Biemond's blog...
http://biemond.blogspot.com.au/2010/05/http-binding-in-soa-suite-11g-ps2.html
Cheers,
Vlad

Similar Messages

  • After updating to firefox 8.0, can not send gifts or requests from farmville or cityville on facebook.

    after updating to firefox 8.0, can not send gifts or requests from farmville or cityville on facebook. (When I hit the send button I get an empty window titled "about:blank", which disappears and nothing gets sent. It works under internet explorer but not under firefox 8.0

    Old Toad wrote:
    I got that message with all of my libraries. Do see if the galleries are still on your iDisk mount your iDisk and go to the iDisk/Web/Sites folder and look for a folder titled "_gallery". Inside of it should be folders for each of your galleries. The folders are titled with 6 digit numbers which makes it difficult to know which folder is for which gallery.
    Thanks. "_gallery" is empty
    Have you tried re-syncing as Larry suggested?
    I'm sure it will work, but I'm perplexed as to how this could happen.
    Do you find that iPhoto now launches faster? Perhaps it's because my web galleries are gone?

  • Where can we see the deleted requests from the DSO

    Hi all, i have deleted a red request in the DSO , which stopped the process chian, so i manuallly loaded DTP and activate , repeated the pc and its fine now, but i need the information regarding the red request i deleted from the requests tab, can u please help me finding where can we see the deleted requests from the DSO, thanks in advance...

    Hi Raghu,
    Open the PC in SE38,goto PC logs on which day DTP failed.right click on DTP-->select Process monitor
    Click on filter buttor>select last oneweek>Execute
    Then select the failed request(It shows status as deleted) You find the details here itself -->take the request number from this
    goto RSRQgive req id>Execute
    Hope this helps.
    Regards,
    Venkatesh.

  • Can we generate a transport request in SCAT transaction?

    Hi Everyone,
    Is it possible to generate a transport request in SCAT transaction.
    I am using a test case to update some tables. Can I generate a transport request so that I can move the changes to the table (like table maitainance) across systems?
    Thanks in advance.

    Hi,
    Please check this link which has very good article for beginner.
    http://www.thespot4sap.com/Articles/CATT.asp
    For more information, please check this links.
    http://help.sap.com/saphelp_47x200/helpdata/en/ae/410b37233f7c6fe10000009b38f936/content.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/37984. [original link is broken] [original link is broken]
    Hope this will help to start with.
    Regards,
    Raj.

  • Can I generate a transport request in SCAT transaction?

    Hi Everyone,
    I am using a test case to update some tables. Can I generate a transport request so that I can move the changes to the table (like table maitainance) across systems?
    Thanks in advance.

    Hi,
    Please check this link which has very good article for beginner.
    http://www.thespot4sap.com/Articles/CATT.asp
    For more information, please check this links.
    http://help.sap.com/saphelp_47x200/helpdata/en/ae/410b37233f7c6fe10000009b38f936/content.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/37984. [original link is broken] [original link is broken]
    Hope this will help to start with.
    Regards,
    Raj.

  • Generate new License Request from ELM

    Hello everyone,
    I am having a problem generating a new License Request from ELM.
    It was required to me by Cisco Licensing in order for them to provide me a new License file.
    Here are the steps that I made in generating a new License Request from ELM. (See attached file ELMaccess, LR1 & LR2)
    I first accessed the ELM under CUCM administration.
    Select License tab> Other Fulfillment Options> Generate License Request> Save to my computer
    I received a .txt file (lic_req_201.....) and that certain file was the one I sent to Cisco Licensing.
    Cisco Licensing replied:
    "It is still the same license request that you have here, just regenerated. What is needed is an entirely new and different ELM License request."
    I am not really certain for what kind of License Request file that he wanted, or maybe there is a different procedure in doing this?
    Can someone help on this?
    If I am missing something or if there is another procedure on generating a new License Request kindly guide me.
    Thank you so much.
    Kind regards,
    Art
    Network Engineer
    Net Pacific Philippines
    CCNA R&S
    CSCO12379161       

    Hi mkchandak,
    Thank you for your response!
    Yes we did, we actually at first generated a license request, submitted it to licensing and they provided us a license file. Now, upon the installation of the license file we received this error message "Insufficient Licenses".
    We went back to cisco Licensing, a new engineer assigned to us, provided all the details he requires, our license case was approved by their Product Manager and now he requests for a "Newly Generated License Request".
    I followed the same steps in generating a new License Request:
    I accessed the ELM under CUCM administration.
    Select License tab> Other Fulfillment Options> Generate License Request> Save to my computer
    I received a .txt file (lic_req_201.....) and that certain file was the one I sent to Cisco Licensing.
    Cisco Licensing replied:
    "It is still the same license request that you have here, just regenerated. What is needed is an entirely new and different ELM License request."
    So maybe he is referring to something other than the License Request that I have provided.
    Maybe there is a different procedure in generating a "fresh and newly generated License Request"
    If you know a step-by-step procedure in achieving this, please guide me.
    Any help would be greatly appreciated.
    Thanks again!
    Cheers,
    Art
    Network Engineer
    Net Pacific Philippines
    CCNA R&S
    CSCO12379161

  • How can I Generate two different reports from single execution of Test cases in NI teststand

    Hi,
    My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
    Solved!
    Go to Solution.

    Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
    The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property. 
    Also, be aware that step's post-expression is not executed in case of error in the step.
    Sergey Kolbunov
    CLA, CTD
    Attachments:
    SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

  • How can I generate product's Request Code ( indesign cs6)

    Have installed on my machine without Internet a cannot fond how to generate Product's request code to activate online. I just ahave a window asking me to connect but I cant. Any tips? thx in advance

    Nobody here can help with activation issues. You’ll need to contact Adobe directly.

  • WLI: Can't call synchronous web services from async business process?

    I have three web services, X, Y, and Z, that I want to call from a business process B. X is asynchronous, Y and Z are synchronous. Therefore, B must be asynchronous. B is called from another business process, A, that must be synchronous. So, I have A call B synchronously using the SyncAsync pattern described in "Best Practices for Oracle WebLogic Integration Application Life Cycle". This worked fine in earlier development when I was only calling X from B. However, when I try to add synchronous calls to Y or Z and run A, I get the following error message from B:
    com.bea.control.classic.ServiceControlException: Attempting to perform the client
    callback 'doY' while servicing a blocking request from the same client.  This can
    result in a deadlock condition.  An @jws:message-buffer tag should be placed on
    the synchronous operation or on this callback.This is obviously an old error message, since it recommends an annotation in the old style. Anyway, what can I do? Shouldn't it be possible to invoke web services synchronously from process B? If so, then how? I don't know what synchronous operation it's talking about -- is it A's call to B? As for the callback, I don't see a separate callback. Annotating the SBControl's method with weblogic.jws.MessageBuffer did no good, and I can't use com.bea.control.annotations.MessageBuffer because the method doesn't return void. Can I make this work without rewriting B, and if so, how? It'd be nice if I could call X, and then call Y and Z while waiting for X's callback.
    Alternatively, I could rewrite my processes so that A calls a new process C synchronously, which in turn calls B (which calls X), Y, and Z. That should work, right? Thanks for any help y'all can give me.

    Greetings everyone,
    We have found a solution to this problem, and it is very much like one offered by Trinidad, except there was some confusion in my understanding.
    http://sql-patch/B1WS/webreferences/LoginService.wsdl
    Indeed, the url http://localhost/Service.asmx appears in the WSDL files, as well as the web.config.
    I changed it to http://sql-patch/B1WS/webreferences/LoginService.wsdl in the WSDL files only.  This did not work.
    We then found it in the web.config file also, and changed it to http://sql-patch/B1WS/webreferences/LoginService.wsdl also.
    The reason I was using this URL is because the files exist there.  Looking at IIS, there is no Service.asmx anywhere in the B1WS path, and this confused me.
    This got us one step further, but now a new error was showing itself -- 405 Method Not Allowed.
    It turns out that the URL we needed to change it to is this:
    http://sql-patch/B1WS/Service.asmx
    That is, we replace localhost with the name of the machine, and NOTHING else.
    This seems to have solved it for us, and is hopefully useful for you.
    Thanks all,
    Mike

  • Can we call an Standard API from the BPM process

    Hi,
    Can we call a Public API from within a BPM Process. Can you please suggest the procedure for achieving the same.
    Also wanted to know the procedure to insert into Standard Interface tables and called Standard Interface program to Create objects like Employees, Employee assignments, etc.
    Please send any documents / writeup to achieve the above.
    Thanks & Regards,
    Murali

    You will have to catalog the API (refer to the Studio help files for the details). Once you catalog the api you can use it in a method. The method can then be used in an activity in the process.

  • How can you generate Multiple random numbers from 1 to 49?

    I am very new at programming with the iPhone SDK and I need some help with a project I am working on. What I want to do is set up a window with 6 labels and 1 button. When the user clicks the button, the program will populate 6 randomized numbers each ranging from 1 to 49, and then place each of 6 numbers in a label. But each time the program ends and starts again the numbers cannot be the same, and also when the user clicks the button, no label can have the same number twice, so for example. If label 1 had the number 10, the other 5 labels cannot have that number until the button is clicked again. I know how to set up the interface, I just need the code. I would so greatly appreciate someone's help in this matter. I have been trying to do this for days and I cannot figure it out. Possibly someone who knows tons about Objective C programming can help me!
    Thank-you so very much!!

    I see that you're writing a lottery number generator. Perhaps the easiest way to do it is to emulate a real lottery: fill an array (NSMutableArray, probably) with the numbers between 1 and 49, pick one at random, remove that number from the array, and repeat. (You can think of the numbers as being the balls and the array as being the machine that pops them out.)
    One simple way to get the random indices needed is to extract six random bytes from Randomization Services using SecRandomCopyBytes, then loop over them, using the modulo operator (%) to select an index within the size of the array.
    And no, I'm not going to write your code for you. If I was going to do that, I could package and sell the app myself.

  • Generate html post request from form9i applet

    I need to interact with a 3rd party credit card processing server form my form9i application.I need to create a html post request with all the input information encapsulated in it and also receive the http response and parse it and display an alert in the form(approved or rejected).Can I do that?
    any answer is going to help me greatly
    Sathi

    GET method may be the easier way. web.show_document('your_url?v1=123&v2=abc'); as of POST method, I guess you need JSP to do it, but how to do it from applet, I like to know too.
    getting back info, I used perl to read the html POST data on web server, then perl parses it and writes to a file on server, then use text_io or utl_file to read data into webform applet fields.
    The drawback I found that the cursor will not get back to webform applet from html pages. I tried to print every possible Javascript methods to wake up it, but it cannot get it.

  • Can you generate a Schem Collection from an SQL Query

    Is there an Option that allows you to generate and XML Schema Collection in a Select Statement that will be loaded either to a table or an application.
    An example
    SELECT Column1, Column2, Column3
    FROM table
    FOR XML PATH('');
    An easy way to generate a template or a start without having to type from scratch?
    Antonio

    Hi Antonio,
    The FOR XML clause
    can generate the XML schema, you can reference the optional XMLSCHEMA.
    XMLSCHEMA [ ('TargetNameSpaceURI') ] 
    Returns inline XSD schema. You can optionally specify a target namespace URI when you specify this directive, which returns the specified namespace in the schema. For more information, see
    Generate an Inline XSD Schema.
    If you have any question, feel free to let me know.
    Best regards,
    Eric Zhang
    TechNet Community Support

  • How can i pass the olde request from jsp to RH?

    i get to jsp page from requset handler A and in the jsp page i use request.get.. to display information on the screen.
    the problem is that in case that the user press on lunguage link it send u to REQUEST handler B that do some jobs and than return you to the same page but now the page dosnt work because the old request is lost and when he get into the line request.get it falls.
    so any one know how to forward the old request to the request handler without putting the old request in the session???
    i understand that in case that u display data to the user forward dosnt work so here begin the problem.

    If I understand you correctly, you build a page based on a request. The page loads and the user makes another request. In processing this second request, the user should be returned to the same page, right? This tends to happen a lot in web apps.
    The model we use is to have a PageModel instance for each page in the application which contains each of the datamodels needed by the JSP. We also have a method responsible for building that PageModel from data contained in the request/session.
    If you set up a PageModel for the page you want to return to you can set this into the session and when you second request comes to build the page, you can either build the page from the new request or use the one stored in the session or a combination of the two.
    The advantage of this is to make getting values from the request cleaner and the building of pages somewhat easier, just a series of pageModel.set...() methods before the jsp does pageModel.get...().
    Mark

  • Can I generate html and images from the same script?

    I am trying to create a script that generates both html and gif images. Is there a way using the multipart mime content type to create a single stream that includes both html and images?

    No. Facing pages has been removed from Pages 5 along with 100 other features.
    If you want to view two parts of the same document you will need to rename a copy and place two windows side by side, which is hampered by Pages 5's bloated use of screen real estate.
    Peter

Maybe you are looking for