Cannot Restore iOS 7.1.0 backup onto iOS 7.1.1 phone

I bought an iPhone 5c today, and in the store backed up my old phone to icloud. When I went to restore my backup, it would not allow me to because the new phone has a higher operating system.  Help!

You can restore an older iOS backup to a newer iOS version. Perhaps you meant the opposite, that the 5C you just got is running an older version than the phone you backed up. Set it up as new, not from a backup, then go to Settings > General > Software Update, and update to iOS 7.1.1. After the update, and the phone reboots, go to Settings > General > Reset > Erase All Content and Settings. Confirm, and then you can walk through the setup screens again, and this time restore from a backup.

Similar Messages

  • Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

    Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

    Follow the directions here to force the phone into recovery mode & restore it:
    http://support.apple.com/kb/HT1808
    This will remove the passcode.

  • How do I restore a broken iPhone's backup onto my new one?

    Hi,
    My iPhone 4s recently stopped working (not the phone itself, just he screen) so I cannot get into it to set up an icloud backup or whatever. I luckily made a backup only a day before it broke, so now I want to put that backup onto my new iPhone 4s. Unfortunately, when I click "restore backup.." it says that my iPhone has never been backed up onto my computer, and thus it finds no backups that I can restore it to. I am aware I never backed it up, but I am unsure of how to access my backup from my old iPhone when I plug in my new iPhone into itunes. Any ideas??
    Thank you

    Easy.  Restore the new iPod from the backup of the old iPod.  See the restoring topic of:
    'iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Restoring IPod Touch 3rd Generation Backup Onto 4th Generation Backup.

    Now that I am getting a 4th Generation Touch to replace my three year and a half year old 3rd Generation Touch, I previously backed up my 3rd gen iPod which ran iOS 5.1.1. Am I able to sucessfully put this backup onto the 4th generation? And if so, will it make the 4th gen run iOS 5.1.1 or will it run iOS 6.1.6, the current iOS for that device.

    When you restore an iOS device either to factry settings or from any backup, the retored iPod will have the latest iOS version for that model iPod. When you restore youyr 4G for the backup of the 3g the retored 4G will hae iOS 6.1.6

  • How can I "selectively" restore my iPhone 6 Plus backup onto my iPhone 5?

    Hey guys,
    I have backed up my iPhone 6 Plus 128GB to my laptop and now I want to restore this backup onto my old iPhone 5 16GB model. But, I only want the Contacts, Notes & Apps from my 6 Plus Backup to be restored onto my iPhone 5 because my iPhone 5 16GB has too little storage and so the whole 6 Plus backup won't fit. How can I do this?

    craigsequeira wrote:
    I think you misunderstood my problem. I used to use an iPhone 5 until I got my 6 Plus. Now I haven't use my iPhone 5 for over a month. Thats why I forgot my passcode. So, is there a way to turn off find my iPhone by only knowing my Apple ID/iCloud Password?
    Yes.
    See this -> iCloud: Remove your device from Find My iPhone

  • I cannot restore ios 4.2.1 on the iphone 3, i cannot restore ios 4.2.1 on the iphone 3, i cannot restore ios 4.2.1 on the iphone 3

    I updated the ios to 6 but the phoen does not recognise the sim , the the phoen was working perfectly on ios 4.2.1 how do I restore the old opearting systems so that I can work on the phone

    Are you aware that 4.2.1 is the last iOS version compatible with a 3G? You never could install iOS 6 on it.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • HELP - Restoring from a Time Machine backup onto an OS 10.3 PowerBook

    I've been having a lot of problems with my computer running the latest version of OS 10.5 so I did a Time Machine back-up then reinstalled the software install/restore disc that came with my PowerBook 1.25 ghz (OS 10.3).
    I forgot that 10.3 didn't include Time Machine and I can't find my OS 10.5 disc, so I can't restore my computer using the backup.
    Is there anyway to restore my computer by directly accessing the Time Machine files without first installing OS 10.5? I really don't want to have to buy that OS again especially since 10.6 is right around the corner.

    Sorry, without a Leopard Install disc, you're out of business.
    If you've still got your receipt, Apple may replace the disc for a nominal fee. I don't think an Apple store will do this, but if you're near one, it's worth a call. Otherwise, try AppeCare.

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • Cannot Restore Client from WSE 2012R2 Backup

    I have just setup a home server using WSE 2012R2. Everthing seems to be working well. Clients backing up OK. One machine has just about maxed out its 256GB SSD (backups have just stopped because of insufficient space) so I thought I'd replace it with a 512GB
    SSD from another machine. So following directions I created a USB boot stick. No problem. However I simply cannot get the client to boot from the stick despite many tries, resetting the bios to boot from USB CDROM (which instructions seem to favor), USB HDD
    etc., The USB works I know that.
    So I thought I'd try another approach. I installed Win7 Pro on the new HD and connected the machine to the Server, then setup the restore environment and did a restore from the dashboard of the client machine. No Go! Files are copied to a "Restore"
    Folder, and the machine fails to copy 30 files because the file name string would be too long. Then it quits, leaving me with 239 GB of files in a folder instead of a restore. This is not helping...
    So much for doing backups! Any ideas out there?

    I am restoring a Lenovo X201 laptop with Win 7 Pro installed on Drive C (boot), trying to migrate from 256 GB to 512 GB. The WSE 2012R2 equipped Server has been doing backups of the C drive for the last week or so as well as another half-dozen machines.
    Searching technet, I found a guide (http://technet.microsoft.com/library/jj713516.aspx). Also, just following the Dashboard instructions(Devices> Client Computer Backup Tasks) indicates that a USB stick with the  recovery key would allow access to
    the server's backups for the machine. The problem seemed to be that the machine would not boot from the stick. I tried re-installing several times, different bios settings etc., and never could get the stick to boot. 
    The other recovery method, again as indicated in the Technet article above or the "Client Computer Backup Task" (3rd tab), is to use the "Client Restore Service". The instructions are a
    bit vague..(How can you restore to a machine you can't boot?). Also when I eventually tried (after I booted the machine with a Win7 Pro disk) all it did was copy the entire drives worth of files into a single "Restore" folder. Not very helpful.
    I also had image backups of the drive that I had made using Acronis 2014 onto an external drive. So I made a recovery CD there and booted the machine figuring I'd restore the image. However after loading properly, the program would freeze preventing any
    recovery actions. I had a go-round with then, downloaded the latest recovery media etc., no dice.
    So I finally solved the problem of upgrading to the 512 GB drive by downloading EaseUS's free workstation backup software and imaging one drive to the other using their recovery media. I never heard of EaseUS before. They are located in the Chinese city
    of Chendu. The recovery media booted up the first time, I imaged the drive over in a few hours and was done.
    I think i'm going to buy the software for all my workstations and the Server too. AS A FOOTNOTE. After all was back to normal, I checked the Client Computer backups on the server. It said no backups were being done because the backup database was corrupted
    (did not say that when I started all this) So I checked and repaired the database overnight and it is working again.
    However, this machine and the 15 TB of drives is brand new, and has been working for about 2 weeks. I have lost confidence in the Servers usefulness and reliability for doing backups that are worthwhile. I'm very happy I did this before I was in crisis mode
    trying to recover valuable data.

  • 4s: Cannot Restore iOS 6.01 through iTunes - no error code

    Please accept my apologies if this has been covered elsewhere - I've spent hours now going through dozens of sites and cannot get anywhere.
    I'm having issues with battery life on a 4S (as well as FB not working, but that's minor) after updating to iOS6
    My iPad3 on the other hand is experiencing incredible battery life on it even watching HD films
    So, I'm trying to restore it to Factory settings via iTunes on an iMac - a good starting place.
    Each time I try restore to factory settings I receive the message below (with no error code)
    "The iPhone "X iPhone 4s" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.
    Please try again later"
    I've tried it probably 20 times, tried using different cables, USB ports, checked all of the advice below (reset, upgrade software etc) but nothing.
    Any advice? I'm slightly nervous after reading other accounts that it can freeze up if something goes wrong.
    Many thanks for reading.
    1. Update to the latest version of iTunes
    2. Verify that your operating system is up to date
    3. Disconnect other USB devices
    4. Check security settings
    5. Restart

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

  • Cannot Restore SQL Server 2008 Server Backup

    PLEASE HELP!!!
    Please I did an Sql database backup for my application server, has some issues with my application data and tried restoring the database but kept getting the error........
    PLEASE MY COMPANY IS HELD TO RANSOM AS WE NEED THE MOST RECENT BACKUP TO WORK!!!

    Thank you Shanky_621 for replying.
    The error is:
    "SQL Server :: Object Cannot Be Cast From DBNull To Other Types"
    Dont use GUI to restore database.This issue can come sometimes when your login is not administrator in SQL Server, instead use below query
    RESTORE FILELISTONLY
    FROM disk= 'AdventureWorks2008R2_Backup'--this would be your backup location
    -- Restore the files for MyAdvWorks.
    RESTORE DATABASE MyAdvWorks--your database name
    FROM AdventureWorks2008R2_Backup
    WITH RECOVERY,
    MOVE 'AdventureWorks2008R2_Data' TO 'D:\MyData\MyAdvWorks_Data.mdf',
    MOVE 'AdventureWorks2008R2_Log' TO 'F:\MyLog\MyAdvWorks_Log.ldf'
    GO
    --specifiy drive where you want to restore database and kjust replace mdf and ndf with name you like in above script
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Want to Fresh Restore iOS 7.0.4 ....

    I am using iOS 7.0.4. Using since 1 year . Now I want to restore fresh iOS7.0.4 again. Is it possible to do now without os upgrading to iOS8.1.2 .
    Thank You

    You cannot "restore" iOS 7.0.4 as a new device through iTunes as the newest iOS version that your iPhone qualifies for (currently iOS 8.1.2) will be downloaded and installed.
    You can do virtually the same thing from your device itself without having a forced iOS update if you do the following on the device:
    Go to Settings/Reset/Erase All Content and Settings
    If you wish to make a backup before performing this operation, go ahead and do so.
    This will wipe out all user data/apps/media/music/etc and will return the device to a clean state without updating the iOS...your device will remain at the iOS version that it is currently on. If you want to restore from a backup later (however, it sounds like you do not want to), you can do so after the "Erase All Content and Settings" is completed and the iPad is being set up as a new device. Otherwise, just proceed with setting up the device from scratch.

  • Need Urgent help please? I need to restore from a previous iphone backup.

    Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
    You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
    After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
    Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
    I'll be anxiously awaiting any help you can give!
    Thank you!!

    rwmac22 wrote:
    Hopt and OneOrangeTree, Thank you both very much for replying!!
    It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
    Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
    Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
    Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
    The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

  • HT5654 I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    If iTunes is otherwise working properly start with TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, otherwise move on to Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Back up iPhone contact while updating IOS 3, then contact lost on iPhone & cannot restore from backup that appear on iTunes! help please

    back up iPhone 3G contact while updating IOS to IOS 6.1.3
    then contact lost on iPhone
    & cannot restore contact from last backup that appear on iTunes-files!: it is grayed (not pickabble!)
    this is scary ! not ipressed by mac for once!
    help please!

    Well Hello,
    maybe 3GS as your question indicates that only S update should work, and it  works, but now only my name appear in contact! wao!

Maybe you are looking for

  • OS X DHCP problem for Windows client

    I have DHCP server running on my mac OS X Mountain Lion and all my user client (they all are using macbook) are able to access the network by IP address given by this DHCP. Unfortunatly, any Windows 7 or Windows client can't get DHCP. Appreciate a he

  • Footer

    Hi, I need some help/tips for my invoice report. I want to print one or more invoices in one report, and on first page (if enough space) of each invoice there will be totals and then bank details and the footer text. Based on database variables, ther

  • Arabic language support

    Is there support or plans to support Arabic character sets in Adobe Presenter?

  • Starting, returning data from, ending and restarting a thread

    I have a program that uses SWTCalender and threads. When I click a button (date), the event will cause a thread to be created, which will create a new shell that contains the calender. When I click on a date in the calender, I want the calender to pa

  • Create Limit Items using Catalog

    Hi Experts, Can anyone advice how  to create limit items using Catalogs. I tried to change the catalog data in BADI BBP_CATALOG_TRANSFER, it results error "Interface data contains error". Please let me know what are key fields to be changed in the BA