Cannot restore iPad mini from iOS 6.1 to 6.0
I backup my ipad mini while have ios 6.1.3, and now i bought new ipad mini and need to restore that backup to it but it have ios 6.0 and i'm not able to restore lack of ios maybe..
Any one have any idea, and if i update my new ipad mini with ios 7 will i be able to restore from ios 6.1.3 backup??
adashti wrote:
I backup my ipad mini while have ios 6.1.3, and now i bought new ipad mini and need to restore that backup to it but it have ios 6.0 and i'm not able to restore lack of ios ...
Correct. You cannot Restore to a lesser version ( iOS 6.1.3 to iOS 6 )
adashti wrote:
... if i update my new ipad mini with ios 7 will i be able to restore from ios 6.1.3 backup??
Yes.
Similar Messages
-
Should I upgrade my iPad mini from iOS 6.1.3 to iOS 7.1.1? Thanks in advance
Should I upgrade my iPad mini from iOS 6.1.3 to iOS 7.1.1? Thanks in advance
No, it's not true. If someone were to buy it from you then it would have to be completely restored as new at which time only the then current version of iOS can be installed. Having an older version on it now makes it worth no more than if it had 7.1.1 installed.
When you sell or give it away the new user cannot use anything on the device that is registered to your Apple ID. That's everything. You will need to turn off Find My Phone, remove the phone from your @icloud.com Find My Phone, then erase it completely. Unless you do that the device is useless to another owner. Erasing it will result in having the new iOS version installed. -
How do i downgrade my ipad mini from ios 8.1.3 to ios 7.1.2
how do i downgrade my ipad mini from ios 8.1.3 to ios 7.1.2 , i upgraded my ipad to ios 8.1.3 today but i find its performance is low
What specifically is your performance issue? I haven't really seen any difference between iOS 7 and iOS 8.
Here are some general performance suggestions from the Internet:
http://www.computerworld.com/article/2833834/how-to-improve-ios-8-performance-on -your-iphone-or-ipad.html
http://osxdaily.com/2014/10/12/fix-ios-8-slow-performance/ -
Cannot restore ipad mini. Not enough room
I had an ipad mini model A1432 (16gb) that had a cracked screen. I bought a second ipad mini (open box but seemed unused), same A1432 model and tried to do a restore so that it could be used while I fixed the first unit. Both have OS 7.04. Itunes is telling me it cannot do the restore becuase there is not enough memory on the new ipad. The old ipad backup was under 14.5GB so what gives? It does not tell me there is a problem with the new ipad and I have confirmed the models on the back of the ipads.
I tried doing a fresh install of the OS (restore iPad) in the hopes that if there was any legacy files from the previous owner who must have gotten it for christmas, would be wiped out.Further to my question.
I am able to do a restore. Takes 15 or more minutes and reboots but then I get the same response when I try to restore what should be a 14.5GB backup. Everything appears to restore properly so I should expect that I would easily have enough room to do the "Restore from this backup:"
Do I have to initialise something or do some steps first? it seems to want me to setup my wifi and other details but I should be able to do the backup as that is what it is for.
The exact wording of the error:
"iTunes could not restore the ipad "Nichole's iPad" becasue not enough free space is available on the iPad."
I only have the option of saying "OK" -
I cannot restore iPad 3 from a copy on iTunes
I have iPad 2 and iPad 3. I needed to copy everything from iPad 2 onto iPad 3, including folder organization.
So, I made a copy of iPad 2 on my PC using iTunes.
Tried to restore iPad 3 (it has the same Apple ID) from the iPad 2 copy.
iTunes starts the recovery procedure and says "30 sec left", "1 min left"..."30 min left". Then it fails and says smth like "iTunes cannot recognize the iPad". Connection is lost.
I did it many times with the same result.
Reinstalled iTunes.
Stopped and restarted Apple Mobile Devices service in Windows services.
Tried to restore the iPad from iTunes again and again.
It's always the same "30 sec left", "1 min left"..."30 min left", failure. Connection is lost.
I recovered initial iPad 3 manufacture settings. Successfully.
Tried to restore the iPad from iTunes again and again.
It's always the same "30 sec left", "1 min left"..."30 min left", failure.
I finished with a try to restore from iPad 3 copy.
The same failure. Connection is lost.
Many hours are spent on this already. It doesn't look like "plug'n'play".
What should I do next?
How to manage the issue?
Thank you.Now I am consiastently getting error 11.
-
Cannot restore iPad Mini error 2003 unknown
When trying to restore my iPad mini, I did everything suggested by articles from Apple without any succes
Always ending with this popup
"The iPad "iPad" could not be restored.An unkown error occurred (2003) "
Please Help MeCheck the "Error 2000-2009" section here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Restoring iPad mini from a 3rd gen. iPad
I had the third generation iPad and just recently bought the new iPad mini. Can I restore a backup of my 3rd generation iPad?
Sweet! Thanks. I used the wrong Apple ID. I started over from scratch and entered the right one in and *VUALA, there were all my backups from the last two years!
-
Cannot Restore iPad Mini Wifi Error 9
Tried all suggestions to no avail, have to replace the Digitizer glass anyway, so what else could i try when it's open...? Full description ...
Windows 8.1 connected to Internet via Ethernet Cable
Installed Latest itunes, d’loaded iPad2,5_7.1.1_11D201_Restore
Firewall off
Defender Realtime Protection off.
Successfully entered DFU Mode (Blank screen)
‘Detected iPad in Recovery’
Hit ‘Shift plus Restore’
Select ‘iPad2,5_7.1.1_11D201_Restore’ from iPad Software.
Choose Erase and Restore.
‘Extracting Software’ Screen blank.
‘Preparing iPad’
‘Waiting for ipad’
‘Verifying’
During the last three steps the Apple logo appears on the screen with a rotating timer and a white progress bar. The Windows Sound when USB devices are installed/removed is heard several times, before the screen goes blank then the Unknown Error (9) message appears, and the screen reverts to the ‘Connect to PC’ screen
Any help warmly welcome...Hello there, Didger46.
The following Knowledge Base article offers up information on the exact error message you are seeing:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#9
Particularly:
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
HT201263 Cannot restore ipad mini after update on configurator
Please help! I have tried restoring from itunes 3 times and each time it gets to the end, says it's processing the file and then jumps back to the ipad recovery mode....
Further to my question.
I am able to do a restore. Takes 15 or more minutes and reboots but then I get the same response when I try to restore what should be a 14.5GB backup. Everything appears to restore properly so I should expect that I would easily have enough room to do the "Restore from this backup:"
Do I have to initialise something or do some steps first? it seems to want me to setup my wifi and other details but I should be able to do the backup as that is what it is for.
The exact wording of the error:
"iTunes could not restore the ipad "Nichole's iPad" becasue not enough free space is available on the iPad."
I only have the option of saying "OK" -
HT201269 I cannot restore my new ipad mini from itunes
When trying to set up new iPad mini from iTunes backup, it does not complete and starts back on the Set Up iPad screen.
Other than the Hotspot feautre, there is no way to connect iPad and iPhone through bluetooth, because there's nothing they can do when connected.
I am assuming what the person at the Apple Store showed you was the Hotspot feature, in which case you need to Turn on Hotspot, and then turn on Bluetooth.
http://manuals.info.apple.com/en/iphone_user_guide.pdf -
I've just received the replacement today, and I restored it from a backup I made back in July when my old iPad didn't have iOS 7. And I've updated the new iPad to iOS 7, but I don't know how to transfer the data I have on my old iPad mini in iOS 7 format into the new already backed up iPad mini. Can someone help me?
Restore from iTune Backup
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
I wish to update my ipad 2 from ios 4.3.3 to ios 7, i follow all the steps and until the end, when i want to restore back, it occurs error 3004. How? and now i can't even use my ipad at all, it's empty.
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers. -
TS3694 why i cannot restore update mini ipad?
why i cannot restore update mini ipad?
Nobody here could possibly know when you ask a question like that. It's like asking why won't my car start.
Supply some details, some information ... Anything that might help. -
Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
i have an ipad mini with ios 7.1.1 it lags a lot and the lower part of the screen is shaky after updating to ios 7.1.1
Thank you for the advice Randy. Very helpful of you to jump in with a post that adds so much value for the OP.
A bit of advice for you as a new user. Please refrain from making assumptions and using hyperbole. Both get in the way of providing useful support. Not "everyone" has tried the basics, let alone know what they are. That's why they're here. These first steps in troubleshooting often fix the issue being asked. If this thread doesn't answer your question, move on and find one that does. Feel free to skip the thousands that advise a reset.
Maybe you are looking for
-
Apple wireless keyboard, mouse and trackpad battery management is SO MESSED UP! HELP!
I have like 2 dozen batteries that I have swapped in the days since 10.8.4. The **** thing just drains in like 4 days. I am using apple wireless keyboard and mouse/trackpad (either at a time) with my macbook pro that is in closed lide clamshell mode
-
Need to give access to a room to multiple users at a time
Hi , My situation is like this . I need to create a room and give access to multiple users to that room at the same time . The user is not very comfortable with the interface and it's usability considering his education level but then he got to use
-
In Explorer drop dowl list is not visible for Entities, Hierarchies, Collection
I am using SQL Server 2012 MDS on Windows 8.1 Pro. The drop down list of entities, Hierarchies, and collections is not visible on explorer screen. When I hover over the Entity menu the drop down seems to appear but hiding behind the rest of the scree
-
Hi, I have a report which is calling a stored procedure.. Stored procedure exceutes 4-5 stored procedure and then returns the count each procedure it ran using union all statement... The stored procedure takes around 3-4 hrs to run because it is look
-
I can't type a simple letter or article anymore, without putting my thoughts in an outline, first. As structure is a good base for all publications in all media, I think it's a good thing to have the option of using structure (and styling on the fly)