Cannot see 'WAITING/RELEASED' in Transport View in NWDS

Hello,
We just installed NWDI (7.0 SP09) and followed the steps to configure it.
I created a New DC, created a WebDynpro application within it and checked-in the activity.
The Activation Request shows a green check mark, and a running-man symbol.
Under the Transport View, I do not see the yellow and green flags for the Waiting and Released tasks.
In CMS, we have configured a single machine for our development server (we have not included any consolidation or test or production machine in the landscape). We have disabled automatic deployment for the development machine.
Can someone please point-out where we are making a mistake ?
Thanks
Jon.

The running man symbol appears because you disabled automatic deployment. The green check mark indicates that activation was successful. The activity should nevertheless appear in the Transport view as a waiting activity, since activation was successful. In order to deploy the DC's touched in the activity you'll have to go to the TCS Deployer now: [http://<nwdiserver>:<port>/TCS/Deployer].

Similar Messages

  • Folio is uploaded in the server but I cannot see it in my Adobe Viewer

    My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
    Thanks.

    There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
    As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer.

  • Cannot See Transfer Rules in Transport Connection

    Hello,
    I have searched Notes and Forums and have not found a solution for this!
    I performed some configuration in our newly upgraded BI system. We
    were on BW 3.5 and upgraded to BI 7.0
    We also change how our landscape was interconnected.
    Our BW Dev system used to connect to our R3 Sandbox system.
    Now our BIDev system connects to our ECC Dev system.
    This is the first project i have worked on since the upgrade was
    successful. What I am finding is that I get the following transport
    error when I look at the STMS logs from BID to BIQ.
    Transport Error
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
    There is no DataSource with these attributes
    Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
    No activation possible.
    Here are the details when I click to get more info on the error message:
    Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
    activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
    system.
    However, no DataSource mapping refers to this transfer structure.
    System Response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer
    structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
    the transport connection to create a consistent request.
    Wierd Behavior
    The big issue now is that when i go to the transport connection in RSA1
    and I want to collect Transfer Rules, I see a small subset of all the
    transfer rules I would expect to see. I am looking specifically for
    the transfer rules: 1_CO_PA2900010_DS PCDEVC200
    Similiar behavior occurs when i am looking for "3.x DataSources" in the
    transport connection
    I can see these rules in other areas of RSA1 such as Infosources.
    Please assist with finding these transfer rules in the Transport
    connection.
    Other then this transport both ECC and BI system landscapes are up and running normally.
    Please help
    Thanks!
    Nick

    Bryan,
    Thanks for jumping onto this thread.  I am going to complete the transports and see if i have any system name conversion issues to address.  I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
    To answer your questions:
    1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
    Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS.  The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
    2. To what Source system do the transfer Rules belong to that you are missing?
    ---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the  missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
    3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
    ---Bryan:  The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
    Thanks!
    Nick
    Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

  • Cannot see my music in list view

    As slick as the new iTunes is, i'd really like to be able to see my music as a list when I'm in playlist mode, rather than as a collection of album covers. As per the older iTunes versions. Can this be done? If not, I hope this can be implemented in a new iTunes update. Thank you.

    Of course your can. Go to the menu on the right of the white top bar:
    and choose "songs". This will bring up your list view. (sorry: screenshot is Dutch - Nummers = songs)

  • I imported pictures and cannot see them in organizer media view.

    The tutorial shows it very simply and I followed the instructions, but the pictures did not show up.  I then tried to get the pictures from the finder file and it said they were already in my catalog.  How do I see them?

    View> Media Types. Make sure they are all checked.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Cannot See Wait Icon/Message in Web Report

    Hi,
    When I run my Web Report, it's taking few seconds to load. In the meantime, it is showing me neither the dialog "Wait the request is being processed!" nor the wait icon.
    I understood from the forums that in the BW style sheet the class "SAPBEXPopUp" holds this function and the icon is stored in the MIME repository at /sap/bw/BeX/Icons/loading.gif
    How could I add this in my Web template? Do I need to edit the html code? Or is there any web item which helps?
    In my template, I just used the table web item and attached a custom query to it.
    Thanks,
    Sai Raghav.

    Sai,
    for setting the cursor to the hourglass use this code in your HTML..
    document.form.cursor = 'wait';
    as for the dialog , it is a javascript snippet which comes with BW ..
    try opening the loading.gif through the MIME reporsitory (SE80) and check if it is active ...
    am not sure if there is any setting for the same..
    Hope it helps.
    Arun
    Assign points if helpful

  • SAP SCs cannot be expanded on Local DCs view on NWDS

    Hello,
    I've created a new track and downloaded the configuration into NWDS.
    The problem is that if I go to the Local DCs view and expand the DCs in the track I can see sap.com_EP_BUILDT_1, sap.com_SAP_BUILDT_1, sap.com_SAP_J2EE_1 etc but I cannot expend them and get the projects inside which causes local compilation to fail.
    I have declared those SCs as dependencies, imported them on the CMS to development, updated the track, re-imported the configuration on NWDS but I still can't expand them.
    Any ideas...?
    Roy

    Please ignore, problem does not exist.

  • Cannot see thumbnails in Organize view in iPhoto 4

    When I download new photos or look at one of my saved rolls, the pictures are all there but I cannot see them in the thumbnail view, only one at a time, so I cannot organize them into albums. This has happened since last October--prior to that, the thumbnails were there. Did I mess something up in another folder somewhere?
    Thank you
    Crablady

    Hi, crablady, and welcome to Apple Discussions. It's very unlikely that you've caused your problem by meddling with any "other" folder. But if, back in October, you meddled with the contents of the iPhoto Library folder inside your Pictures folder when the iPhoto application wasn't open, that explains your problem.
    Hold down the Shift and Option keys while starting iPhoto, and keep holding them down until you're asked whether you want to rebuild the library. Click "Yes", then click "Save".
    This will create a new, rebuilt iPhoto Library_1 folder inside your Pictures folder. If it opens up properly in iPhoto, displaying things as you expect it to, you can trash the Original iPhoto Library folder and empty the trash to recover storage space. If the new library isn't right either, trash it instead of the original iPhoto Library folder, and post back here for further advice.
    When iPhoto isn't running, it expects you to leave the contents of your iPhoto Library folder strictly alone. Everything in that folder is arranged precisely the way iPhoto needs it to be arranged, and any disturbance in there will throw things out of whack.

  • Cannot see view's data from PC

    This is a weird thing! If i use sqlplus from my pc i cannot see the data from a view but if i login to the linux box there i can see the data. What can this be?
    Any help will be very much appreciated.
    Octavio

    Start from first principles.
    Log in as the owner of the view and check you can see the data.
    Check that the view source is correct and noone made any changes. Its just possible, a change was made between you querying the view on the server and from your PC.
    if you're on 10g try and sleect the data as of 60 minutes ago,
    eg select * from view_name as of timestamp sysdate-1/24
    I ahve no knowledge of oracle apps, but you just have to apply proper problem solving techniques.
    Ie query the view
    Run the query
    Eliminate conditions
    Check data in tables (Doing this first can save a lot of time)
    Find out if anyone changed anything

  • Cannot see Oracle Explorer after installing ODT10104

    After installing ODT10104 on Windows XP I cannot see Oracle Explorer in my View menu group. I'm using VS 2005 and I installed ODAC92070 but still cannot see Oracle Explorer. The install of ODT was successful but an exception occured while getting vaues from my register. Here is an excerpt of the generated log
    "....Starting install Install Phase 2 of component Oracle Developer Tools for Visual Studio .NET
    Calling Query w32RegQueries10.1.0.2.0 RegKeyExists
    Key = HKEY_LOCAL_MACHINE
    SubKey = SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FA7E3351-448B-4BDA-986F-8CB3DA36CE5D}
    Query Returned: true
    Setting variable 'b_IsVSIPInteropInstalled' to 'true'. Received the value from a code block.
    Calling Query w32RegQueries10.1.0.2.0 RegGetStringValue
    Key = HKEY_LOCAL_MACHINE
    SubKey = SOFTWARE\Microsoft\.NETFramework
    Value = sdkInstallRootv1.1
    Query Exception: GetValueKeyNotFoundException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
    C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\
    Setting variable 's_gacutilPath' to 'C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\'. Received the value from a code block......."
    What key values is missing in my register which may cause the install of ODT to fail?
    Mike

    I installed version of ODT 10.2.0.2.20. I now have the menu item 'Oracle Explorer' but when I click on it system returns error Package Load Failure...Package 'Oracle Developer Tools for Visual Studio .NET has failed to load properly ( GUID = {D601BB95-E404-4A8E-9F24-5C1A46246CE} )
    I'm using VS 2005, not 2003. Any ideas how to fix?
    Mike

  • Cannot see transported items in Queue, even after releasing them.

    I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
    Any input would be greatly appreciated.
    Alan

    Hello Jazz!
    Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
    We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
    Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
    Thanks Again,
    Alan

  • HT201412 I cannot open the month of March 2013 in my iPad3 calendar. I can however see it in the year view for 2013 and I can view the daily and weekly calendars for March 2013. Any ideas what has gone wrong ? Thanks

    I have a new iPad3 and have found I cannot open the month of March 2013 when I tap on it. All other months open OK ! I can see March 2013 in the yearly view and I can open the individual days, and weeks, of March 2013 but I cannot see the whole month in the monthly view. When I try to open the monthly view for March 2013 it returns me to the start screen which shows all the apps etc and closes the Calendar app. Any guidance of what is going wrong and how it can be corrected. Thanks !

    Don't worry we have to start somewhere. Feel free to post your questions here, we learn from each other.

  • I cannot see any of my text boxes in the vertical view.

    I just checked the first chapter of my iBook in the vertical display. I cannot see any of my text after the section introduction page. All of it is written in text boxes that I created. I can see all of my widgets and text in the standard horizontal view but when I switch to vertical all I can see is the section introductions and the widgets off to the left hand side. This is a guide to surface palpation. Each page is its own set of instructions instead of being one long piece of continous writing. Is there a way to reformat my text boxes so that they are visible in the vertical view without starting over?

    The portrait mode only supports the flow of text (and pictures pasted into the text), and widgets (they will all be positioned on the left).
    You need to design in landscape mode knowing how the portrait mode works. Text boxes won't show up in portrait mode.

  • Cannot See Content in Editable Region in Design View

    A have a couple of pages with content in an editable region of a template.  I needed to apply another template to some of the pages things were going along fine.  Then I came across a page, went to modify > templates > apply template to page and then selected my new template.  I now cannot see my content in the design view.  I can see the code for my content in the code view. I can see the content when I publish the page and view it in my browser.  I can even see the content when I open the page to edit in Contribute.
    Why in the world can I not see my content in design view?  I've tried a few other pages and they are now having this problem as well.  I like to work in split screen view and it makes it kind of difficult if I can't see the design view.

    Found it!  Started looking at the code to provide it and noticed an extraneous </tr> and </td>.  Removed and it was fixed!  Simple!  Guess I should have looked a little harder before running to the forum!
    Thanks for the assist!

  • Why users with rights defined as View cannots see the data of the form ?

    Hi,
    I have a nice form page. My application has an authorization scheme with an authentification function : return acl_custom_auth. It is working well. I have defined users with Edit, View and Admin rights. Unfortunately on a form, if the user is defined as "View" he cannot see the data, he only sees the item but their content is not diplayed. I don't understand why. I would like him to see the data.
    The authorization scheme of the page is "Access control -view" as well as the items of the page.
    Do you have any idea of what is going wrong here ?
    Thank you for your kind help !
    Regards,
    Christian

    Another thing that can be done though mon tech-savy people may not know about it.
    Locate a group of PDF's and select at least 5-6 of them as a Group.
    hold down Option key while click on file menu
    Click on Get info.
    One window will open for the group.  in Mountain Lion (OSX.8.2) the term will change to Show Inspector.
    click on the  button next to Open With.
    choose either Reader or Acrobat.
    just bellow is a question Use Acrobat (or Reader) to open all files of this type, Click on it and choose yes.
    Make sure you have a mix of Adobe PDF's and Preview PDF/s for  this to work. If it wasn't good for opening other Type Files I'd compress Preview and throw the original away. It’s a nusiance.

Maybe you are looking for