Cannot start EPMA Process Manager.

I cannot start EPMA Process Manager on Windows. Here is the error from the Event Log:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException ORA-1017: invalid username/password; logon denied at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection()
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
--- End of inner exception stack trace ---
at Hyperion.DataAccessLayerCore.DALConnectionTester.TestConnection(Int32 maxRetries, Int64 timeout)
at Hype...
I have reconfigured, retyping the correct user and password many times now. I can log into the database from the server using SQL Plus with no issues. If anyone has an idea of what could be wrong, I would really appreciate the help.
Thanks!

I had the DBA create me a new empty database user. I ran the config tool again using this user/pwd and selected first time configuration of database. This finished successfully, 213 objects were created in the database. When I try to start the dimension server, I am still getting the ORA-1017 error.

Similar Messages

Unable to start EPMA PROCESS MANAGER

I'm having an issue starting the EPMA Process Manager service ERROR :
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.ArgumentException: An item with the same key has already been added.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.<FillTableList>b__0(DALDatasetCommand command)
at Hyperion.DataAccessLayerCore.DataAccessLayer.ExecLoadSQL(String SQL, Action`1 onSetParams, Action`1 onRead, DatabaseContext context)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.FillTableList()
at Hyperion.DataAccessLayerCore.BaseSchemaReader.GetTableList()
at Hyperion.DataAccessLayerCore.DataAccessLayer.FillSchema()
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataA...
Any help would be greatly appreciated. Thanks

Hi,
I believe this happens when you have a problem with your datasources or instances, if you have two conflicting ones then the process manager will not start up.
Can you check your planning instances and datasources and remove any duplicates or ones that could be conflicting.
Cheers
John
http://john-goodwin.blogspot.com/

EPMA process manager service is not starting

Hi gurus,
I'm working on Hyperion v-11.1.1.3 and in that i'm not able to start the EPMA process manager.It is throwing an error message as
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
When checking in the dimension server logs/eventvwr it is showing the following error message. But some times it is showing 1053 error message that-the process manager is not starting in a timely etc..
*[Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: ORA-01115: IO error reading block from file 4 (block # 782666)*
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
System.Data.OracleClient.OracleException: ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleLob.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadToEnd()
at System.Data.OracleClient.OracleLob.get_Value()
at System.Data.OracleClient.OracleColumn.GetValue(NativeBuffer_RowBuffer buffer)
at System.Data.OracleClient.OracleDataReader.GetValue(Int32 i)
at Hyperion.DataAccessLayerCore.DALDatasetCommand.ColumnValue(Int32 index)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
*at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)*
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.LoadDimensionMemberMemoProperties(Int32 libraryID, Int32 dimensionID, Action`1 action)
at Hyperion.DimensionServer.PropertyManager.LoadDimension(Dimension dimension)
at Hyperion.DimensionServer.PropertyManager.LoadProperties()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
What could be the reason for the issue and the possible resolution.I have checked in other posts in the forum but unable figure out resolution.
If it is related to Oracle client issue then where can we find out the installed oracle client in the server?
Thanks in advance

Hi John,
Thanks for the information..i have checked and came to know that the db server is down.
It is working fine now.
Could you please let me know..what all the services will not be available if Process manager service is not started?
Thanks in advance

Cannot start background process DTPR_13362_

Hi ,
Whenever DTP is executed in the Dev Server,it throws an error.
Error msg: Cannot start background process DTPR_13362_1 26.09.2011 14:17:44 1 Min. 50 Sec.
while checking the message in the monitor screen the cursor is at this function.
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
Please let me know what needs to be done here so that DTP processed sucessfully.
This is urgently required..thanks..
Regards,
Kalim.

Hi
Check how many parallel processes are defined for this DTP.
display the DTP in RSA --> in menu bar click on "goto" --> "settings for batch manager"
In the next screen you will get the number of processes assigned to this DTP.
When you are running this DTP, check these many background processes are available in your system.
If you want you can decrease this number9by default it will be 3)
Regards,
Venkatesh

Problem starting BPEL Process Manager

When starting the BPEL Process Manager, the second window that is spawned to run the start_olite.bat throws a hotspot error as shown below. This happens each time and causes the PM not to start. Anyone had this problem ?.
Thanks
Andrew
C:\OraBPELPM\bin>call C:\OraBPELPM\bin\olsv2040.exe /debug
Debugging Oracle Lite Multiuser Service.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c92ae22, pid=3268, tid=1948
# Java VM: Java HotSpot(TM) Client VM (1.4.2_12-b03 mixed mode)
# Problematic frame:
# C [ntdll.dll+0x2ae22]
# An error report file with more information is saved as hs_err_pid3268.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#

It couldn't be such difficult.
I have the jar's, the drivers in, the jdbc url connection as
url="jdbc:oracle:thin:[USERNAME/PASSWORD]@IP:PORT:SID"/>
Also I can connect via sqlplus with this string conn.
The main error I get is
"Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "jdbc/BPELServerDataSource"."

Cannot start BPM process, "Start process" button is disabled: Why?

Dear all,
I am working on the BPM example "Modeling Your First Process with SAP NetWeaver Business Process Management" with the "Purchase process". I did everything as mentioned in the tutorial.
At the end, I would like to start the process using
NWA > Configuration management > Processes and Tasks > Process Repository
I can see my WD example that I have deployed and I see the my task definitions and my process definition. In the tutorial it says, that I can select the process definition and click "Start process". But the button "Start process" is always disabled. I cannot click the button. I don't know why. Did I miss something?
I am logged in as Administrator. I am using NW AS 7.2 and I am developing with NWDS 7.1 SP04.
Anyone has an idea what can I do to start the process?
Thanks in advance
Edited by: Patrick Beck on Jun 25, 2010 4:55 PM

Thanks for the link.
I added the new context attribute in the XSD files (under Process Modeling > Data Types > XSD Files).
Since I added a new context attribute "Comment" of type String in my Web Dynpro, I added the following on the corrent position of the XSD files:
                         <xsd:element name="Comment" type="com.sap.dictionary.string">
               <xsd:annotation>
                    <xsd:appinfo>
                         <xsd:attribute name="ReadOnly" type="xsd:boolean" fixed="false"/>
                                                                      </xsd:appinfo>
               </xsd:annotation>
          </xsd:element>
I also edited input and output mapping of the human and automated activities to support the new attribute "Comment". I thought this is enough to pass the new "Comment" parameter from activity to activity.
But when I started the process, I filled in the comment field in Web Dynpro and went to the next step in the process. Seems like the new attribute value for "Comment" got lost. It does not appear in the next process step.
Did I miss something?
These are the steps I did:
- edit Web Dynpro UI to support the new context attribute "Comment". created new input field and mapped to the Comment context attribute (that is defined in my WDP interface).
- edited XSD files (one for each human activity) to support the new Comment attribute as mentioned above.
- edited the mapping between the activities to support pass-through of the new Comment attribute between the activities
But it seems like it's not saved in the context attribute "Comment". It got lost after the first step.
Any ideas?

Problem when starting BPEL Process Manager 10.1.2.0.2

Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
That message is shown in WSIF's label of BPELAdmin.
Also starting show us
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "jdbc/BPELServerDataSource".
But jdbc looks good.

It couldn't be such difficult.
I have the jar's, the drivers in, the jdbc url connection as
url="jdbc:oracle:thin:[USERNAME/PASSWORD]@IP:PORT:SID"/>
Also I can connect via sqlplus with this string conn.
The main error I get is
"Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "jdbc/BPELServerDataSource"."

Cannot start OC4J process using opmnctl

opmn startall hangs and times out with error on OC4J_SECURITY
Posted: Oct 3, 2008 9:46 AM Reply
FYI.
A few days ago our system drive, on our Development system, crashed and we had to rebuild it.
All of our Oracle Installations remained intact,
But
I've had to: modify kernel parameters, install packages, etc., similar to pre-install procedures.
After re-creating some of the oracle specific files in the /etc and /usr/local/bin directories
I've been able to get our databases up and running.
But
I cannot start all of the necessary processes for our Application Server.
It hangs for several minutes then returns this error message:
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=6304)
time out while waiting for a managed process to start
Log:
/oracle6/app/oracle/product/10.1.2as/opmn/logs/OC4J~OC4J_SECURITY~default_island~1
There is no helpful information in the, above mentioned, log file.
opmnctl status displays this information:
ias-component | process-type | pid | status
======================================
OC4J | OC4J_SECURITY | 0 | NONE
??? My thoughts are:
1. I've neglected to re-create a necessary Oracle specific file on the system drive, or
2. This is a port access issue due to firewalls or something of that nature.
Can you please help me here?
Thanks- Gary

Thank you for the info.
Also
I forgot to add one additional thought:
Could it be a linking issue, to some of the library files??
I don't know why this thought has crossed my mind,
but I know in times passed, (probably from years ago), I have had to do a relink of some sort to resolve
whatever issue it happened to be at the time.
I'd appreciate you thoughts on the 'relink' idea.
In the meantime, I will double check myself on having satisfied all of the necessary install requirements.
Thanks again- Gary

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

Getting following error for EPMA Process Manager on Win2K3

Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.Data.OracleClient.OracleException: ORA-00942: table or view does not exist at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OracleClient.OracleCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader()
at Hyperion.DataAccessLayerCore.DALDatasetCommand.get_Reader()
at Hyperion.DataAccessLayerCore.DALDatasetCommand.FastRead()...
Please help!

Just as an FYI - We had the same error - but a different solution.
For some reason, the "Hyperion Role" in the database does not include "CREATE VIEW" privileges. The configuration log showed failed statements at the lines that were CREATE VIEW. The Event Log showed the same message as was indicated above.
When we were searching for a solution, we came across this post.
I hope this helps save someone some time.
--T St. Hilaire

Cannot start EPMA FIle Generator

I cannot get the EPMA file generator to run. I am running a Windows XP client system within a VM and have all other 11.1.2 clients running correctly. EPMA server is running and I can connect to it via Workspace. Whenever I start the EPMA File Generator client I get an error message "The application failed to initialize properly (0xc0000135). Click on OK to terminate the application." There are no log entries that I can find anywhere on the client and the Windows Event Viewer shows no further detail. I have already run the installer again to reinstall it without any change.
Any ideas?

Have a look in the windows event viewer and see the error message that has been generated.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot start job with Management Console

Hi,
The Management Console displays the status of batch jobs started with DI Designer, but when attempting to run a batch job via the Management Console nothing happens.
The execute command displays "Job started successfully", but does nothing.
Any ideas would be appreciated.
Thanks in advance.
Regards,
Meet

Hi Meet,
Do execute the job again from Central Management Console and go to following path
C:\ProgramData\SAP BusinessObjects\Data Services\log
Here in the log folder you will find those many number of folders with job server names as there are job servers in your server.
Go to the respective job server folder(which is used to run your particular job).
In this folder you can find, all the repository folders associated with that job server.
Go to the respective repository in which you have the job.
Here comes the best part.In this repository folder Data services created 6 files for every job execution, which are
ERROR_DATE_NUMBER(.txt,and .idx)
MONITOR_DATE_NUMBER(.txt and .idx)
TRACE_DATE_NUMBER(.txt and .idx)
Open the trace.txt file which has been created recently.(check date and time after running your job).
Now this file will tell you whether the job has been executed, started and stopped due to some error or never executed.
Case1:
If there's a trace.txt file then job had started
Case2:
If it executed successfully then you will find the start and end time stamps in the trace.txt file.
Case3:
If there's an error, open the recent error.txt file, you'll find the error log!!
Hope this will help you. Do update the status of your issue!!
Regards,
Mubashir Hussain

Cannot start EPMA services :: Help needed

Hi,
We have installed EPMA 11.1.1.3 on a Windows 2003 Server VM with 2GB RAM and Weblogic 9.2 server. Database configuration and app deployment are successful but somehow the services wont start up.
Checked the event viewer and it was pointing to Dimension server error. Here is the content from dimension_server.log .
Please check and let me know if you can identify the root cause of this issue..
[Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: Object reference not set to an instance of an object..
System.NullReferenceException: Object reference not set to an instance of an object.
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
Thanks

Yes, workspace agent is running fine. We have the hyperion 11.1.1.3 suite,except for EPMA & Fin Reporting print server, running on AIX 5.3 on a different server.., if that may lead you into something
Thanks

Cannot start EPMA Process Manager.

Similar Messages

Maybe you are looking for