Cannot start oracle name server
When I try and start my name server service I get the following error in my listener.log file:
TNS-12502: TNS:listener received no CONNECT_DATA from client
The name server will not start and if I try and execute the Names.exe I get the error:
NNL-00018: warning: could not contact default name server
Any ideas?
Tim
Did you configure your name Server ? with namesctl utility
oracle@spirit:~/OraHome1/dbs> namesctl
Oracle Names Control for Linux: Version 8.1.7.0.0 - Production on 31-OCT-2003 13:04:14
(c) Copyright 1997 Oracle Corporation. All rights reserved.
NNL-00024: warning: no preferred name servers in SQLNET.ORA
NNL-00018: warning: could not contact default name server
Welcome to NAMESCTL, type "help" for information.
NAMESCTL>
Joel P�rez
Similar Messages
-
Cannot start Oracle HTTP Server
Hi,
if I try to start the Oracle HTTP Server I get the following error message on the console:
C:\Oracle\product\11.1.1\as_1\instances\instance1\bin>opmnctl startproc ias-component=ohs1
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=bittest1:6703
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=366744641,pid=1728)
Starten von verwaltetem Prozess nach der maximalen Anzahl der Wiederholungen
nicht erfolgreich
Log:
C:\oracle\product\11.1.1\as_1\instances\instance1\diagnostics\logs\OHS\ohs1\
console~OHS~1.log
In the log file I found this entry:
09/08/28 13:03:32 Start process
Apache.exe: Syntax error on line 1032 of C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf: Syntax error on line 3 of C:/Oracle/product/11.1.1/as_1/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf: Cannot load C:/Oracle/product/11.1.1/as_1/ohs/modules/mod_wl_ohs.so into server: The specified module could not be found
But this module is definitive in this folder. What can I do?
Edited by: user8631539 on 28.08.2009 04:14I have a workaround - If you are not planning to use mod_wl_ohs then don't load this module.
You can stop it loading by commenting below line from httpd.conf
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
1. Go to
C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf
2. change
# Include the configuration files needed for mod_weblogic
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
to
# Include the configuration files needed for mod_weblogic
# include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
3. Restart HTTP Server
4. $ORACLE_BASE/admin/<instance_name>/bin/opmnctl restartproc ias-component=ohs1
Atul Kumar
http://onlineAppsDBA.com -
Cannot start Oracle BI Server Service
I had installed Oracle Bussiness Intelligence 10g Release 2 version on my system....I was able to generate reports properly with the Default Repository(SH)....But When I created an OLAP repository and loaded it....It worked fine for a few minutes....then BI server service was automatically stopped....later when the service was restarted,it worked for 5 min but agin it got automatically stopped....but on attempting to restart the service again I got a error message ERROR 1068: Service cannot be be started because groups or dependencies not loaded....How can I reinstate the server process? I tried changing the repository to the default one but it didn't work....
Edited by: user10422576 on Oct 19, 2008 11:42 PMI have seen similar errors when the repository is corrupt. Are you able to open the repository in offline mode ? In online mode, when you check consistencies, does it pass or does it throw any errors ? Also check the log files. if you are not getting enough information, try changing the loglevel for that user and then try it. usually this gives a good amount of info to debug.
Good Luck.
Dinesh Veera -
Hello,
I have a prob with my oracle Name Server it wouldnt start it.
If i want to start manuel follow answer:
this is under net8 assistent
TNS-12536:TNS:vorgang w|rde blockieren
TNS-12560: TNS: Protokolladapterfehler
TNS-00506: Operation w|rde blockieren 32-bit Windows Error: 997: Unknown error
I hope you can me help
as Info
it is Oracle 8.1.7 Enterprise Editionchange the file %ORACLE_HOME%\NETWORK\ADMIN\sqlnet.ora the follow line
SQLNET.AUTHENTICATION_SERVICES= (NTS) by
SQLNET.AUTHENTICATION_SERVICES= (NONE) -
Cannot start the presentation server
Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
failed to start a managed process after the maximum retry limit
Log:
$ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
saw.sawserver
saw.sawserver.terminatesawserver
saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
saw.webextensionbase.init.workstationCheck
saw.webextensionbase.init
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan -
Oracle Names server stops after a few seconds
Hi all,
Working as a Server admin and DBA installed Oracle report server. They came to me saying the Oracle Names Server stops after a few seconds.
There are 2 windows 2003 R2 32 bit servers, active passive config. The first server runs the service fine, this second server has the issue. Both servers were build the same..very strange that one would work and the other now.
Hereis the Event viewer log for the service failure.
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 6/22/2011
Time: 11:08:14 AM
User: N/A
Computer: USSCNBOSCRPT02
Description:
Faulting application NAMES.EXE, version 0.0.0.0, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x00031a02.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 4e 41 4d ure NAM
0018: 45 53 2e 45 58 45 20 30 ES.EXE 0
0020: 2e 30 2e 30 2e 30 20 69 .0.0.0 i
0028: 6e 20 6d 73 76 63 72 74 n msvcrt
0030: 2e 64 6c 6c 20 37 2e 30 .dll 7.0
0038: 2e 33 37 39 30 2e 33 39 .3790.39
0040: 35 39 20 61 74 20 6f 66 59 at of
0048: 66 73 65 74 20 30 30 30 fset 000
0050: 33 31 61 30 32 31a02
Googled the erro but nothing simular came up.
Any ideas?
Thanks,
MikeHEre are the logs from the Names.log
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:03:06
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_5224.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1575))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00265: warning: cannot load data from checkpoint file
NL-00905: error opening D:\Oracle\ora92\network\names\ckptop.ora
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 2: No such file or directory
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00265: warning: cannot load data from checkpoint file
NL-00905: error opening D:\Oracle\ora92\network\names\ckpdom.ora
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 2: No such file or directory
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:07:16
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2376.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:09:24
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_3500.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:10:37
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_1888.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:27:33
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2564.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 11:33:35
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_1564.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 13:38:28
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_2552.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 22-JUN-2011 11:08:13
Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
System parameter file is D:\Oracle\ora92\network\admin\names.ora
Log messages written to D:\Oracle\ora92\network\log\names.log
Trace information written to D:\Oracle\ora92\network\trace\names_4800.trc
Trace level is currently 0
NNO-00268: warning: configuration database is not used, using checkpoint data instead
NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
NNO-00116: warning: data type "tos.npd.omd" in topology load
NNO-00116: warning: data type "host.nm.omd" in topology load
NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora" -
How to trace sevice names used in oracle names server
We are in process of cleaning up our oracle names server (9.2.0.6). In process, we found several fault entries (service names) which we are not sure of.. ( as it is a large nework) but we need to fix them. For ex. abc. world may be pointing to a db server orcl on server1, but we may need this to point to orcl on server2 and so on..
However, before making any changes on this names server, we want to be doubly sure of 'whether the service names are being used by anyone' (as this is the only names server supporting > 100 live db)? So, we want to trace the service names (and maybe the clients using them).. Is there a way out..?..
Metalink note 299149.1 shows a way to trace clients.. but there is no way I found to trace the service names being used or not.
kindly help.
Rgds
JpSelect a button and look at properties. Check the option "Set Name From Link." You can select multiple buttons and do them at one go.
-
Unable to tnsping entry in oracle names server
Hi
I have an issue in connecting from my oracle client (oracle 10g ee on windows xp) hosted on windows xp to oracle names server. To be precise, the issue is on my client as others are able to connect to same ONS.
When I tnsping <connect string> I get a can't resolve hostname error; On checking the trace file it shows:
nnfgsrdp: Setting path:
nnfgsrdp: checking element ONAMES
nnfgsrdp: Native naming adapter for ONAMES not found
nnfgsrdp: checking element TNSNAMES
nnfgsrdp: Path set
nnfun2a: entry
nlolgobj: entry
nnfgrne: entry
nnfgrne: Going though read path adapters
nnfgrne: Switching to TNSNAMES adapter
nnftboot: entry
nlpaxini: entry
nlpaxini: exit
nnftmlf_make_local_addrfile: entry
nnftmlf_make_local_addrfile: construction of local names file failed
nnftmlf_make_local_addrfile: exit
nlpaxini: entry
nlpaxini: exit
nnftmlf_make_system_addrfile: entry
nnftmlf_make_system_addrfile: system names file is C:\oracle\product\10.2.0\db_2\NETWORK\ADMIN\tnsnames.ora
nnftmlf_make_system_addrfile: exit
nnftboot: exit
nnftrne: entry
nnftrne: Original name: s2live
nnfttran: entry
nnfgrne: Query unsuccessful, skipping to next adapter
nnfgrne: exit
nnfun2a: address for name "s2live" not found
nnfun2awanm: Getting the path of sqlnet.ora
nnfun2awanm: Getting the path of local and system tnsnames.ora
Here is my sqlnet.ora
TNSPING.TRACE_LEVEL=ADMIN
TNSPING.TRACE_DIRECTORY=C:\oracle\product\10.2.0\db_2\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DEFAULT_DOMAIN = world
NAMES.PREFERRED_SERVERS =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = orans.abc.xyz.com)(PORT = 1688))
NAMES.DIRECTORY_PATH= (ONAMES, TNSNAMES)
Can I somehow install Native Naming Adaptor for ONAMES ( I have alrady unistalled/installed sqlnet)
Best Regards
JugHeadOracle Names is deprecated in 10g.
You need to switch to Oracle Internet Directory/ LDAP
Sybrand Bakker
Senior Oracle DBA -
Start Oracle Application Server in Debug mode
We have oracle application server 10g with oc4j. How do we configure App server to start in debug mode so remote debugging from different machine can be done.
I am new Oracle Application Sever. OC4j is java container and it starts automatical when ORacleAServer starts.
Thanks,
MSMadanShah, how did you start Oracle Application server? Let us say, you start it with opmnctl. In order to do java remote debugging with the oc4j process inside the OAS, you have to add the java remote debugging option to the "java-options" in the $ORACLE_HOME/opmn/config/opmn.xml.
<ias-component id="OC4J">
<process-type id="home" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5050 -Xrs -server -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
The "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5050" is what I added. After starting OAS, you can connect to the oc4j process by selecting port 5050 using a java remote debugger that is included in any major IDE, like Jdeveloper. For more information, search for "remote debug" in the online help of Jdeveloper. -
[SOLVED] Cannot start i3/ X Server
Hi,
I cannot start my x server or i3 and I have no clue why. My setup is up to date. I am running arch inside vmware and probably there lies the problem.
I normally start i3 using the .xinitrc ("exec i3") if I login from tty1. Doing this now will throw me back to the login screen.
If I login from another tty and enter "i3" or "X" or "startx" the VM will hang-up. It does not start the xserver nor can I Ctr+C or switch ttys.
The particular line where it hangs is "Loading extension GLX". On the last successful login (/var/log/Xorg.0.log) directly after this line would be "LoadModule: vmware".
So my guess is that it's a vmware issue. But I do not know where to look to track down the source of this error.
I know, that I didn't give you much information. But I didn't find anything suspicious in my logfiles. So if you need something pasted here, please let me know.
Regards,
Watnuss
Last edited by Watnuss (2013-03-05 14:52:27)It's a known bug: https://bugs.archlinux.org/task/34040
-
Dbstart cannot start Oracle server
The command dbstart cannot start the Oracle 8ir2 (8.1.6) server. It only shows the message "Database "ORCL" warm started.", but the oracle instance did not start nor database was not mounted. I have updated the /etc/oratab file to put Y to my database.
But the command dbshut can shutdown the oracle server.
Any help!!
I am running Redhat 6.2. The hardware is Athlon K7-750, 256MB Ram, ASUS K7V M/B, Voodoo 3.The program svrmgrl of Oracle 8ir2 shows JServer Release 8.1.6.0.0 instead of PL/SQL (Version|Release) 8.1.? in the screen. Thus, I edit the dbstart script to change the line
/PL\/SQL (Release|Version)/ {substr($3,1,3) ;
to
/JServer (Release|Version)/ {substr($3,1,3) ;
to solve this problem.
Ed Cheng -
Unable to start Oracle Reports Server for 10g version 10.1.2.3.0
Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>
<!--property name="cacheDir" value="your cache directory"/-->
<!--property name="maxCacheFileNumber" value="max number of cache files"/-->
<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"/-->
</cache>
<!--Please do not change the id for reports engine.-->
<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">
<!--property name="sourceDir" value="your reports source directory"/-->
<!--property name="tempDir" value="your reports temp directory"/-->
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
<property name="oidEntity" value="reportsApp_myhostname_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"/>
</security-->
<!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
<property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</destination-->
<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<!-- By default server will use rwnetwork.conf as network config file
Use this element to override the same -->
<!--networkConfig file="rwnetwork.conf"></networkConfig-->
<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
<!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
<property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</notification-->
<log option="noJob"/>
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
</jobStatusRepository-->
<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>
<!--jobRecovery auxDatFiles="yes"/-->
<!--
The value of the 'identifier' element is encrypted and is of the form SERVERACCESSKEY_USER/SERVERACCESSKEY_PASSWORD
SERVERACCESSKEY_USER and SERVERACCESSKEY_PASSWORD in <server>.conf and targets.xml
file should match for Reports EM pages to display data correctly.
Corresponding entries of username and password in targets.xml:
<Property NAME="Password" VALUE="SERVERACCESSKEY_PASSWORD" ENCRYPTED="FALSE"/>
<Property NAME="UserName" VALUE="SERVERACCESSKEY_USER" ENCRYPTED="FALSE"/>
-->
<!--pluginParam name="mailServer">stmail.oracle.com</pluginParam-->
<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->
<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:758)
at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall -
SAP cannot start Oracle after Upgrading to 10g
I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size 2199816 bytes
Variable Size 2025713400 bytes
Database Buffers 503316480 bytes
Redo Buffers 2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati -
Failed to start Oracle Weblogic Server node in 11g
Hello friends,
I have a problem starting the Weblogic Server node Oracle 11g (10.3.5).
Any suggestions to solve the problem
Logs----------------------------------------------------------------------------------
<Nov 3, 2011 12:33:03 PM> <INFO> <NodeManager> <Server output log file is '/opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.out'>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 3, 2011 12:33:07 PM PET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 3, 2011 12:33:11 PM PET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 19.1-b02 from Sun Microsystems Inc.>
<Nov 3, 2011 12:33:18 PM PET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Nov 3, 2011 12:33:24 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:24 PM PET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 3, 2011 12:33:25 PM PET> <Notice> <Log Management> <BEA-170019> <The server log file /opt/middleware/user_projects/domains/DomainOWL/servers/Server01/logs/Server01.log is opened. All server side log events will be written to this file.>
<Nov 3, 2011 12:33:25 PM PET> <Warning> <NodeManager> <BEA-300043> <Node manager native library not found - server process id not saved.>
<Nov 3, 2011 12:33:26 PM PET> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that a native performance library is in: '"/opt/jdk1.6.0/jre/lib/sparcv9/server:/opt/jdk1.6.0/jre/lib/sparcv9:/opt/jdk1.6.0/jre/../lib/sparcv9:/opt/middleware/patch_wls1035/profiles/default/native:/opt/middleware/patch_ocp360/profiles/default/native:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64:/opt/middleware/wlserver_10.3/server/native/solaris/sparc64/oci920_8:/usr/jdk/packages/lib/sparcv9:/lib/64:/usr/lib/64"'
>
<Nov 3, 2011 12:33:37 PM PET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 3, 2011 12:33:40 PM PET> <Warning> <Store> <BEA-280101> <The persistent file store "_WLS_Server01" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 3, 2011 12:33:49 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 3, 2011 12:33:56 PM PET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of oimClusterT.>
<Nov 3, 2011 12:34:26 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 3, 2011 12:34:27 PM PET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoIdentity.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/middleware/wlserver_10.3/server/lib/DemoTrust.jks.>
<Nov 3, 2011 12:34:31 PM PET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0/jre/lib/security/cacerts.>
<Nov 3, 2011 12:34:33 PM PET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunPKCS11-Solaris RSA public key, 512 bits (id 58638024, session object)
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 15:12:27 PET 2002,
To: Tue Mar 22 15:12:27 PET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:33 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 192.168.1.10:7006 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.10:7005 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 3, 2011 12:34:34 PM PET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Server01" for domain "DomainOWL" running in Production Mode>
Exception in thread "[STANDBY] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:217)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Exception in thread "[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:27 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "Timer-1" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:36:53 PM PET> <Error> <HTTP> <BEA-101020> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:24 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:36:33 PM PET> <Error> <JMX> <BEA-149501> <An exception occurred while registering the MBean com.bea:Name=idmAdminServerT,Type=Server at property WebService.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '24' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:37:16 PM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:39:41 PM PET> <Error> <HTTP> <BEA-101216> <Servlet: "CoordinatorPortTypeServlethttp" failed to preload on startup in Web application: "wls-wsat.war".
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:42:32 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:15 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
<Nov 3, 2011 12:43:26 PM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 3, 2011 12:45:53 PM PET> <Error> <HTTP> <BEA-101017> <[ServletContext@15375304[app:bea_wls_deployment_internal module:bea_wls_deployment_internal.war path:/bea_wls_deployment_internal spec-version:null]] Root cause of ServletException.
java.lang.OutOfMemoryError: PermGen space
>
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "weblogic.timers.TimerThread" java.lang.OutOfMemoryError: PermGen space
Thanks<Nov 4, 2011 11:42:08 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
Truncated. see log file for complete stacktrace
>
<Nov 4, 2011 11:42:34 AM PET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.getDeclaredMethod(Class.java:1935)
at java.io.ObjectStreamClass.getInheritableMethod(ObjectStreamClass.java:1349)
at java.io.ObjectStreamClass.access$2200(ObjectStreamClass.java:52)
Truncated. see log file for complete stacktrace
>
The WebLogic Server encountered a critical failure
Reason: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:08 AM PET> <Warning> <Socket> <BEA-000402> <There are: 5 active sockets, but the maximum number of socket reader threads allowed by the configuration is: 4. You may want to alter your configuration.>
Exception in thread "[ACTIVE] ExecuteThread: '27' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
Exception in thread "[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
<Nov 4, 2011 11:44:43 AM PET> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.OutOfMemoryError: PermGen space.
java.lang.OutOfMemoryError: PermGen space
I made the change and continue with the same problem, you can tell me which file should make this change, very grateful -
Error while starting Oracle Management server service
Hi all,
We are about to administer our database using Oracle Enterprise manager. For that we have configured OEM in a Test PC and tried to connect our database.
First i have logged in to OEM Console with Sysman login id using the default password "oem_temp" and it prompts me to change the password, also i have changed the password as "xxxxx" and i have come out of OEM console and tried to relogin using the changed password.
i got the message as invalid login or password or
check for the availablity of Management server service"
i found that the service Oracle Management server which was previously running is not running now and i tried to restart that manually.
On doing that i got a message as
"Error 1053: The service did not respond to the start or control request in a timely fashion"
Would any one of u help me to solve this problem.
Thanks in advance..Hi-- could you please describe your administrative domain?
I need to know the operating systems on each of the
clients and the OSB admin server. Also, does 'obtool' CLI
tool work? Do any of the machines act as an apache webserver
for another application? Is there any other backup service
running on any of the machines?
thanks,
Judy
I noticed that when re-installing the OSB without the
Administrative Server (only Media Server and Client)
I got no errors at all (but still cannot connect from
another Administratice Server to my machine)
Maybe you are looking for
-
How to make file associations in my java apps
I am making a Graph maker in Java. Just give x = 1,2,3,4,5 and corresponding y = f(x) and get the discreate graph. The graph can then be saved as a file of extention .grf (say) on the hard disk, and can be opened in my graph maker software for editin
-
I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why
-
I downloaded an audio book. It says it was downloaded but I cant find it on my iPad
I downloaded an audio book using iTunes . It says it was downloaded but I cant find it on my iPad anywhere...not in iTunes nor in the audio book app.
-
Is there any way to get scratches off led screen?
I swear the plastic covering the LCD screen is as soft as butter. It gets scratched as easily as the underside of a cd. In hindsight I know i should have always kept it in a protective case, but now that what's done is done is there a way to buff out
-
How can I turn off Guided Access if I forgot the Password?
One of my students with Autism turned on Guided Access on my iPad2 and I do not know how to log off without knowing the password. Please help!