Cannot uninstall runbook server

I have an Orchestrator environment that has a dud of a runbook server. I cannot deploy integration packs to it which means i cant run runbooks from it. I also cannot uninstall the runbook server. Well, if I am on the server i can uninstall it from ARP, but
I should be able to do it from the Deployment Manager. I get an error saying "Failed to uninstall...". I did There is an obvious communication issue between my management server and runbook server. I can ping and I've played with the firewall; I
turned it off and tried uninstalling and deploying IPs. I think its more of a trust issue which brings me to my one and only event to go on:
Source: Security Kerberos. Event ID: 4
"The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server
<<service account>>. The target name used was HOST/<<server>com. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered
on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for
the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified,
and the target domain (domain.COM) is different from the client domain (domain.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server."
In the first line the service account is in place where the error indicates the server should be....so thats strange. Why would it be looking for a server name but accidentally have the service account?
Also, I did uninstall Orchestrator from ARP on the runbook server, but it is still in the deployment manager and runbooks will still try to run from it unless I override in the runbook properties. So I can do that, but I'm not sure how to clean up afterwards
and get it all out of the management server properties. Which means i cant re-install it.
I tried
this and it didn't work.
Ideas?
Thanks.
- Slow is smooth and smooth is fast.

Hi,
Ok,then I would un-install from ARP (Add/Remove Programs in Control Panel).
If you tried removing the Runbook Server with the SQl Statement mentioned in http://blogs.technet.com/b/orchestrator/archive/2012/06/04/removing-inaccessible-computers-from-deployment-manager.aspx
and you don not have un-installed or stoppped the Runbook Server it will register itself again ...
Additionally DELETE FROM OBJECTS where Name = 'OLD-SERVER' is needed acoording to the blog comments.
The Runbook Servers take the Runbooks to start them. Therefor you don't need to specify this in the Runbook properties if a Server is off-line.
Good Luck!
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Similar Messages

Cannot uninstall VMware Server 1.0. from Windows 7

[pictures attached]
I tried to install VMware Server 1.0.10, but got this message:
Windows requires a digitally signed driver
A recently installed program tried to install an unsigned driver.
This version of Windows requires all drivers to have a valid digital signature.
The driver is unavailable and the program that uses this driver might not work correctly.
Uninstall the program or device that uses this driver and check the
publisher's support website to get a digitally signed driver.
Driver: VMware bridge driver (64-bit)
Service: VMware Bridge Protocol
PROBLEM: cannot uninstall VMware Server
QUESTION: how can I manually uninstall VMware Server from my Windows 7?
Thanks in advance.

If you're being flooded with this (literally every second) in /var/log/messages I would recommend applying patch 5679560 (if you have access to metalink):
Oct 16 11:05:06 vmerin su(pam_unix)[8725]: session closed for user oracle
Oct 16 11:05:06 vmerin su(pam_unix)[8768]: session opened for user oracle by (uid=0)
This will reduce the load significantly.

Cannot uninstall sql server 2012 on Windows 7

This is the error a co-worker gets when trying to uninstall SQL Server 2012. She is running Windows 7 Professional
Service Pack 1, 64 bit OS. She had SQL 2008 installed and then installed 2012 Enterprise as well, because she needed it for a project. The problem is we don't have a license for local instances of Enterprise, so we need to install it. However,
2012 Setup is telling us we don't have the minimum requirements to *install* 2012. Which leads to some interesting questions:
1) Why does the 2012 installer allow you to install but not uninstall when you don't meet system requirements?
2) How does that make any sense?
3) Does she really need to install more software to be able to uninstall? Since SP1 is already installed, what would that be?
Thanks!
Joe

Hello,
In theory, if Windows 7 has SP1 then it is compatible with SQL Server 2012.
Please try to use the procedure explained on the following article:
http://msdn.microsoft.com/en-us/library/ms143412.aspx
If that article does not help, please perform the following steps to manually uninstall SQL Server 2012:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like
C:\Program Files\Microsoft SQL Server and subfolders.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cannot uninstall instance of SQL Server 2014

Hello,
I have two instances of SQL Server 2014 installed and i want to uninstall them (and install SQL Server 2012 evaluation). I managed to uninstall the one instance. When i try to uninstall the second a message informs me that the operating system does not meet
the minimum requirements. I had the same proble when uninstalling SQL Server 2012 and i went to the setup file and changed the compatibility mode to Windows Vista. Is there something similar that i should do in the case of SQL Server 2014 or i should do something
totally different?
Thanks in advance,
Andreas

Hi,
Personally I have not faced this situation but this seems bug below Connect Item MS closed as not reproducable
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Below connect Item deals with same issue as your
https://connect.microsoft.com/SQLServer/feedback/details/974626/cannot-uninstall-sql-express-2014-on-windows-7-sp1
Workaround should be instaed of uninstalling using GUI please use command prompt
Launch setup.exe from an elevated command shell. Change to the directory "c:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014", then type:
Setup.exe /action=uninstall
Please change uninstall script as per need
Normal uninstall Script would look like
Setup.exe /Action=Uninstall /FEATURES=SQL,AS,RS,IS,Tools /INSTANCENAME=InstanceName
Please refer to
this link for uninstall parameters
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Cannot uninstall BPC 7

Hi all,
I cannot uninstall my BPC. it terminates during uninstallation,
error number: 0x800A005B
description: Object variable or with block variable not set
setup will now terminate
also, i cannot open server manager,
error message: component 'Osoftservermanagecontrol.ocx' or one of
its dependencies not correctly registered:
a file is missing or invalid
is there another way to uninstall BPC?
Thanks!

It seems the installation of some components was not done properly and because of that you haqve all these errors.
You have to delete BPC folder and you have to delete also the follow registry keys:
Hkey_Local _Machine - Software - Outlooksoft
All key Hkey_Local _Machine - Software - SAP AG - SAP Business Objects Planning and Consolidation ...
Regards
Sorin Radulescu

Uninstall SQL Server 2008 Express R2 and SQL Server 2012 unsuccessfully

HI
I want to uninstall SQL Server 2008 R2 and SQL Server 2012 but it was successful.
When I try to uninstall 2008 R2
It shows the sqlsupport.msi can't find
Warning 26003. Microsoft Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
When I uninstall 2012, it shows the SQL Browser has been installed.
Warning 26003. Microsoft SQL sERVER 2012 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server Browser for SQL Server 2012

I tried to uninsall SQL Server 2008 R2 and SQL Server 2012.
Yes, I did what you said : right click on Microsoft SQL Server 2008 R2 and then uninstall.
System pop up window says :
Warning 26003. Microsoft SQL Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
I hope you are uninstalling from Add remove program. Can you first uninstall
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
And then uninstall the
Microsoft SQL Server 2008 R2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"

I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database
Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases.
I tried all the things below;
* I'm uninstalling everything related with Sql Server from Control Panel/Programs And Features.
* I'm deleting all the keys related with Sql Server from Regedit.
* Later i'm restarting windows, and trying to install again. But during the install it gives the error "Database
Engine Services Failed", install is finishing but when i opened the Management Studio i cannot connect to Database Engine with Sa naturally.
* My firewall is already closed. And i have not any antivirus software.
* I gave the permission for port 1433 on firewall.
Please help me. Why i always take "Database Engine Services Failed" error? I will get crazy cause of that for many days.

Here's the ERRORLOG file which i found under the folder;
Microsoft SQL Server/MSSQL10_50.MSSQLSERVER/MSSQL/Log.
2014-09-27 03:39:40.15 Server Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64)
Apr 2 2010 15:48:46
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-09-27 03:39:40.15 Server (c) Microsoft Corporation.
2014-09-27 03:39:40.15 Server All rights reserved.
2014-09-27 03:39:40.15 Server Server process ID is 5768.
2014-09-27 03:39:40.15 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX'.
2014-09-27 03:39:40.15 Server Authentication mode is MIXED.
2014-09-27 03:39:40.15 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-09-27 03:39:40.15 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-09-27 03:39:40.15 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q Turkish_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
2014-09-27 03:39:40.18 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After
the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-09-27 03:39:40.18 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-09-27 03:39:40.18 Server Detected 4 CPUs. This is an informational message; no user action is required.
2014-09-27 03:39:40.31 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-09-27 03:39:40.32 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-09-27 03:39:40.43 Server Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-09-27 03:39:40.45 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No user action
is required.
2014-09-27 03:39:40.45 spid7s Warning ******************
2014-09-27 03:39:40.45 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-09-27 03:39:40.46 spid7s Starting up database 'master'.
2014-09-27 03:39:40.52 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-09-27 03:39:40.58 spid7s SQL Server was started using the -f flag. SQL Server Audit is disabled. This is an informational message. No user action is required.
2014-09-27 03:39:40.59 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:40.59 spid7s Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required.
2014-09-27 03:39:40.59 spid7s Starting up database 'mssqlsystemresource'.
2014-09-27 03:39:40.61 spid7s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2014-09-27 03:39:40.94 spid7s Password policy update was successful.
2014-09-27 03:39:40.94 spid8s Starting up database 'model'.
2014-09-27 03:39:40.95 spid7s Server name is 'CAGATAY'. This is an informational message only. No user action is required.
2014-09-27 03:39:41.21 spid8s Clearing tempdb database.
2014-09-27 03:39:41.21 spid10s A new instance of the full-text filter daemon host process has been successfully started.
2014-09-27 03:39:41.24 Server A self-generated certificate was successfully loaded for encryption.
2014-09-27 03:39:41.24 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2014-09-27 03:39:41.24 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag
7806. This is an informational message only. No user action is required.
2014-09-27 03:39:41.28 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2014-09-27 03:39:41.28 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-09-27 03:39:41.70 spid8s Starting up database 'tempdb'.
2014-09-27 03:39:41.86 spid7s Warning ******************
2014-09-27 03:39:41.86 spid7s Attempting to change default collation to Turkish_CI_AS.
2014-09-27 03:39:41.92 spid7s index restored for master.syspriorities.
2014-09-27 03:39:41.95 spid7s index restored for master.sysbrickfiles.
2014-09-27 03:39:41.96 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:41.96 spid7s index restored for master.sysowners.
2014-09-27 03:39:42.13 spid7s index restored for master.sysdbreg.
2014-09-27 03:39:42.16 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.16 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.16 spid7s index restored for master.sysschobjs.
2014-09-27 03:39:42.17 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.17 spid7s index restored for master.syscolpars.
2014-09-27 03:39:42.17 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.sysxlgns.
2014-09-27 03:39:42.18 spid7s index restored for master.sysxsrvs.
2014-09-27 03:39:42.18 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.sysnsobjs.
2014-09-27 03:39:42.18 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.18 spid7s index restored for master.syscerts.
2014-09-27 03:39:42.19 spid7s index restored for master.sysrmtlgns.
2014-09-27 03:39:42.19 spid7s index restored for master.sysxprops.
2014-09-27 03:39:42.19 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.19 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.31 spid7s index restored for master.sysscalartypes.
2014-09-27 03:39:42.31 spid7s index restored for master.sysidxstats.
2014-09-27 03:39:42.31 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysendpts.
2014-09-27 03:39:42.32 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysclsobjs.
2014-09-27 03:39:42.32 spid7s index restored for master.sysremsvcbinds.
2014-09-27 03:39:42.32 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.32 spid7s index restored for master.sysrts.
2014-09-27 03:39:42.33 spid7s index restored for master.sysasymkeys.
2014-09-27 03:39:42.33 spid7s index restored for master.syssqlguides.
2014-09-27 03:39:42.44 spid7s index restored for master.syssoftobjrefs.
2014-09-27 03:39:42.47 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.48 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.49 spid7s index restored for master.spt_values.
2014-09-27 03:39:42.49 spid7s index restored for master.MSreplication_options.
2014-09-27 03:39:42.56 spid7s index restored for tempdb.syspriorities.
2014-09-27 03:39:42.56 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s index restored for tempdb.sysowners.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.57 spid7s index restored for tempdb.sysschobjs.
2014-09-27 03:39:42.57 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.59 spid7s index restored for tempdb.syscolpars.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysnsobjs.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.syscerts.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysxprops.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.60 spid7s index restored for tempdb.sysscalartypes.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysidxstats.
2014-09-27 03:39:42.61 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysclsobjs.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysremsvcbinds.
2014-09-27 03:39:42.61 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.61 spid7s index restored for tempdb.sysrts.
2014-09-27 03:39:42.62 spid7s index restored for tempdb.sysasymkeys.
2014-09-27 03:39:42.69 spid7s index restored for tempdb.syssqlguides.
2014-09-27 03:39:42.69 spid7s index restored for tempdb.syssoftobjrefs.
2014-09-27 03:39:42.75 spid7s index restored for model.syspriorities.
2014-09-27 03:39:42.75 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.75 spid7s index restored for model.sysowners.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:42.76 spid7s index restored for model.sysschobjs.
2014-09-27 03:39:42.76 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.syscolpars.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.sysnsobjs.
2014-09-27 03:39:43.00 spid7s index restored for model.syscerts.
2014-09-27 03:39:43.00 spid7s index restored for model.sysxprops.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.00 spid7s index restored for model.sysscalartypes.
2014-09-27 03:39:43.00 spid7s index restored for model.sysidxstats.
2014-09-27 03:39:43.01 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.01 spid7s index restored for model.sysclsobjs.
2014-09-27 03:39:43.01 spid7s index restored for model.sysremsvcbinds.
2014-09-27 03:39:43.01 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.01 spid7s index restored for model.sysrts.
2014-09-27 03:39:43.01 spid7s index restored for model.sysasymkeys.
2014-09-27 03:39:43.01 spid7s index restored for model.syssqlguides.
2014-09-27 03:39:43.01 spid7s index restored for model.syssoftobjrefs.
2014-09-27 03:39:43.02 spid7s Starting up database 'msdb'.
2014-09-27 03:39:43.82 spid7s index restored for msdb.syspriorities.
2014-09-27 03:39:43.85 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:43.93 spid7s index restored for msdb.sysowners.
2014-09-27 03:39:43.99 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.00 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.09 spid7s index restored for msdb.sysschobjs.
2014-09-27 03:39:44.12 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.20 spid7s index restored for msdb.syscolpars.
2014-09-27 03:39:44.20 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.20 spid7s index restored for msdb.sysnsobjs.
2014-09-27 03:39:44.20 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.25 spid7s index restored for msdb.syscerts.
2014-09-27 03:39:44.25 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.26 spid7s index restored for msdb.sysxprops.
2014-09-27 03:39:44.26 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.26 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.27 spid7s index restored for msdb.sysscalartypes.
2014-09-27 03:39:44.37 spid7s index restored for msdb.sysidxstats.
2014-09-27 03:39:44.41 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysclsobjs.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysremsvcbinds.
2014-09-27 03:39:44.42 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.42 spid7s index restored for msdb.sysrts.
2014-09-27 03:39:44.54 spid7s index restored for msdb.sysasymkeys.
2014-09-27 03:39:44.54 spid7s index restored for msdb.syssqlguides.
2014-09-27 03:39:44.59 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.74 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:44.85 spid7s index restored for msdb.syssoftobjrefs.
2014-09-27 03:39:44.89 spid7s index restored for msdb.syspolicy_policies_internal.
2014-09-27 03:39:44.90 spid7s index restored for msdb.sysproxies.
2014-09-27 03:39:44.90 spid7s index restored for msdb.syscollector_execution_stats_internal.
2014-09-27 03:39:44.90 spid7s index restored for msdb.syssubsystems.
2014-09-27 03:39:44.91 spid7s index restored for msdb.log_shipping_primary_secondaries.
2014-09-27 03:39:44.91 spid7s index restored for msdb.sysdownloadlist.
2014-09-27 03:39:44.91 spid7s index restored for msdb.log_shipping_monitor_primary.
2014-09-27 03:39:44.92 spid7s index restored for msdb.sysoriginatingservers.
2014-09-27 03:39:44.93 spid7s index restored for msdb.log_shipping_monitor_history_detail.
2014-09-27 03:39:44.95 spid7s index restored for msdb.log_shipping_monitor_error_detail.
2014-09-27 03:39:44.95 spid7s index restored for msdb.log_shipping_secondary.
2014-09-27 03:39:44.97 spid7s index restored for msdb.log_shipping_secondary_databases.
2014-09-27 03:39:45.10 spid7s index restored for msdb.log_shipping_monitor_secondary.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysjobs.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysutility_ucp_mi_file_space_health_internal.
2014-09-27 03:39:45.10 spid7s index restored for msdb.sysutility_ucp_mi_database_health_internal.
2014-09-27 03:39:45.10 spid7s index restored for msdb.syscollector_blobs_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_mi_dac_execution_statistics_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysjobsteps.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_ucp_dac_file_space_health_internal.
2014-09-27 03:39:45.11 spid7s index restored for msdb.logmarkhistory.
2014-09-27 03:39:45.11 spid7s index restored for msdb.sysutility_mi_session_statistics_internal.
2014-09-27 03:39:45.12 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.12 spid7s index restored for msdb.sysdtscategories.
2014-09-27 03:39:45.33 spid7s index restored for msdb.syspolicy_target_sets_internal.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysutility_ucp_mi_volume_space_health_internal.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysschedules.
2014-09-27 03:39:45.33 spid7s index restored for msdb.sysdac_instances_internal.
2014-09-27 03:39:45.33 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.50 spid7s index restored for msdb.sysssispackages.
2014-09-27 03:39:45.51 spid7s index restored for msdb.sysutility_ucp_computer_cpu_health_internal.
2014-09-27 03:39:45.51 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.52 spid7s index restored for msdb.sysssispackagefolders.
2014-09-27 03:39:45.52 spid7s index restored for msdb.sysdac_history_internal.
2014-09-27 03:39:45.53 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.62 spid7s index restored for msdb.syscategories.
2014-09-27 03:39:45.62 spid7s index restored for msdb.systargetservers.
2014-09-27 03:39:45.62 spid7s index restored for msdb.systargetservergroups.
2014-09-27 03:39:45.62 spid7s index restored for msdb.syspolicy_policy_category_subscriptions_internal.
2014-09-27 03:39:45.62 spid7s index restored for msdb.sysalerts.
2014-09-27 03:39:45.62 spid7s index restored for msdb.sysoperators.
2014-09-27 03:39:45.63 spid7s index restored for msdb.syspolicy_system_health_state_internal.
2014-09-27 03:39:45.63 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.63 spid7s index restored for msdb.syscollector_config_store_internal.
2014-09-27 03:39:45.65 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.65 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.65 spid7s index restored for msdb.sysmanagement_shared_server_groups_internal.
2014-09-27 03:39:45.66 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.66 spid7s index restored for msdb.sysutility_mi_smo_properties_to_collect_internal.
2014-09-27 03:39:45.66 spid7s index restored for msdb.sysmanagement_shared_registered_servers_internal.
2014-09-27 03:39:45.66 spid7s index restored for msdb.syscachedcredentials.
2014-09-27 03:39:45.79 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.79 spid7s index restored for msdb.syscollector_collection_sets_internal.
2014-09-27 03:39:45.79 spid7s index restored for msdb.sysutility_ucp_dac_health_internal.
2014-09-27 03:39:45.80 spid7s index restored for msdb.MSdbms.
2014-09-27 03:39:45.80 spid7s index restored for msdb.MSdbms_datatype.
2014-09-27 03:39:45.80 spid7s index restored for msdb.sysmail_profile.
2014-09-27 03:39:45.80 spid7s index restored for msdb.sysutility_ucp_managed_instances_internal.
2014-09-27 03:39:45.83 spid7s index restored for msdb.syspolicy_management_facets.
2014-09-27 03:39:45.84 spid7s index restored for msdb.sysutility_ucp_mi_health_internal.
2014-09-27 03:39:45.86 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.86 spid7s index restored for msdb.syscollector_collector_types_internal.
2014-09-27 03:39:45.86 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.86 spid7s index restored for msdb.syspolicy_configuration_internal.
2014-09-27 03:39:45.87 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.87 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.87 spid7s index restored for msdb.syspolicy_facet_events.
2014-09-27 03:39:45.87 spid7s index restored for msdb.sysmail_account.
2014-09-27 03:39:45.87 spid7s index restored for msdb.syspolicy_conditions_internal.
2014-09-27 03:39:45.88 spid7s index restored for msdb.sysutility_ucp_health_policies_internal.
2014-09-27 03:39:45.88 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:45.88 spid7s index restored for msdb.syscollector_collection_items_internal.
2014-09-27 03:39:45.90 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.00 spid7s index restored for msdb.sysmail_servertype.
2014-09-27 03:39:46.00 spid7s index restored for msdb.sysutility_ucp_filegroups_with_policy_violations_internal.
2014-09-27 03:39:46.02 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_policy_check_conditions_internal.
2014-09-27 03:39:46.03 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_configuration_internal.
2014-09-27 03:39:46.03 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.03 spid7s index restored for msdb.sysutility_ucp_policy_target_conditions_internal.
2014-09-27 03:39:46.04 spid7s index restored for msdb.sysmail_server.
2014-09-27 03:39:46.04 spid7s index restored for msdb.syspolicy_policy_categories_internal.
2014-09-27 03:39:46.04 spid7s index restored for msdb.syspolicy_object_sets_internal.
2014-09-27 03:39:46.04 spid7s Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
because the former has to be smaller than the latter.
2014-09-27 03:39:46.05 spid7s index restored for msdb.sysmail_configuration.
2014-09-27 03:39:46.05 spid7s index restored for msdb.sysdbmaintplan_databases.
2014-09-27 03:39:46.05 spid7s index restored for msdb.log_shipping_primary_databases.
2014-09-27 03:39:46.39 spid7s The default collation was successfully changed.
2014-09-27 03:39:46.39 spid7s Recovery is complete. This is an informational message only. No user action is required.
2014-09-27 03:39:47.17 spid51 Changed database context to 'master'.
2014-09-27 03:39:47.18 spid51 Changed language setting to us_english.
2014-09-27 03:39:47.72 spid51 Setting database option RECOVERY to FULL for database model.
2014-09-27 03:39:47.84 spid51 Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.84 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:47.98 spid51 Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:47.98 spid51 Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
2014-09-27 03:39:47.98 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2014-09-27 03:39:48.27 spid51 Error: 15007, Severity: 16, State: 1.
2014-09-27 03:39:48.27 spid51 '' is not a valid login or you do not have permission.
2014-09-27 03:51:25.13 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:51:25.13 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:51:32.67 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:51:32.67 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:51:42.11 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:51:42.11 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:52:42.07 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:52:42.07 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:53:01.23 Logon Error: 18461, Severity: 14, State: 1.
2014-09-27 03:53:01.23 Logon Login failed for user 'CAGATAY\cagatay'. Reason: Server is in single user mode. Only one administrator can connect at this time. [CLIENT: <local machine>]
2014-09-27 03:53:17.57 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:53:17.57 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
2014-09-27 03:53:32.54 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:53:32.54 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:04.29 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:54:04.29 Logon Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:10.36 Logon Error: 18456, Severity: 14, State: 5.
2014-09-27 03:54:10.36 Logon Login failed for user 'CAGATAY\cagatay'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
2014-09-27 03:54:47.18 Logon Error: 18456, Severity: 14, State: 8.
2014-09-27 03:54:47.18 Logon Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
Resolve the error, please refer to the following links.
Enable DAC:http://www.mssqltips.com/sqlservertip/2538/enabling-dedicated-administrator-connection-in-sql-server-2008-express-edition/
could not register the SPN Kerberos:
http://saveadba.blogspot.com/2012/03/could-not-register-spn-kerberos.html
Make sure the password of sa is correct,and the login 'CAGATAY\cagatay' has been created in SQL Server

How do I uninstall Mavericks Server?

Okay, I wasn't really using my MacBook Pro as a server in the past, but it appears that Apple has added a "helpful" feature to Mavericks Server where, according to "pmset -g", Server is perpetually preventing the computer from sleeping: "sleep prevented by com.apple serve"
I'm not really using Server on my Mac anymore, so how do I uninstall it under Mavericks? I've searched Apple Support and the rest of the web, and can see plenty of advice out there for Lion and Mountain Lion, but none for Mavericks yet, so I'm wondering if someone has already done this...

I was talking about uninstalling Mavericks Server, not Mavericks. The server is just one app that happens to install a number of other services. But anyway, here's my advice:
If you have a computer that Apple launched on or after Mavericks launched, then you cannot uninstall Mavericks.
If you have an older computer, then the best way to get the old OS back is to restore a backup from before you installed Mavericks. Lacking that, if you made an install DVD of the old OS before running the installer (which is always a good idea), then you can boot that DVD, wipe your drive, and install the older OS. You will lose all your data by wiping the drive, so make a backup of important data first.
If you don't have a backup, or you don't have an older OS install DVD, then consider this to be a learning experience. If Mavericks broke your app, then you'll have to wait for a newer version to come along.

Firefox cannot connect to server:IE can:DNS pref tried: cure?

Firefox error page displays on startup, 'cannot connect to server'. Tried uninstall/reinstall. Tried various start pages. IE works perfectly.

This happens for all web sites?? This troubleshooting article has a number of suggestions. Hopefully one of them will fix it.
[https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can Firefox cannot load websites but other programs can | Troubleshooting | Firefox Help]

Cannot uninstall Exchange 2013 - Cannot get ecp page too.

I am trying to install Exchange 2013 and we already have Exchange 2007 in our production environment.
Running the command get-exchangeserver |fl give the following. It shows IsCleintAccessServer : False, I am pretty sure I did select both the roles at the time of installation.
IsHubTransportServer            : True
IsClientAccessServer            : False
IsExchange2007OrLater           : True
IsEdgeServer                    : False
IsMailboxServer                 : True
IsE14OrLater                    : True
IsE15OrLater                    : True
IsProvisionedServer             : False
IsUnifiedMessagingServer        : True
IsFrontendTransportServer       : False
I can see all the virtual folders in IIS and while trying to access the ecp page using https://localhost:444/ecp?exchclientver=15, it says "Sorry! Access Denied".
Get-ecpvirtualdirectory gives no output.
If I try to uninstall I get the following error.
Error:
Uninstall can't continue. Database Mailbox Database 0424069483 : This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or arbitration mailboxes. To get a list of all mailboxes in this database, run the
command Get-Mailbox -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive.
To get a list of all public folder mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -PublicFolder. To get a list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration.
To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive.
To disable a public folder mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>.
If this is the last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command
Set-MailboxPlan <MailboxPlan ID> -Database <Database ID>. It was running the command 'Remove-MailboxDatabase 'CN=Mailbox Database 0424069483,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XYZ,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=XYZ,DC=X,DC=X' -whatif'.
I would like to uninstall this server and do a fresh install. Tried recover option too, still facing same problem.
HELP!!!

Hi,
I suggest re-install CAS role for test whether it works.
If not, please uninstall the MBX role as what you want. I suggest make a full backup if there is any data in the Exchange server, then remove the mailbox database.
Found an article for your reference:
Cannot remove mailbox database
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.unwillingtoremovemailboxdatabase(v=exchg.150).aspx
After uninstall the Exchange server, I suggest double check whether there is anything leave in AD via ADSIEdit tool. Then re-install Exchange server.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Unable to uninstall sql server 2012 from Windows 7(ultimate) 64-bit SP1 version.

I am trying to install sql sever 2012 on my m/c but it's giving me error after partial installation.
Now I have successfully installed Sql Server 2008 R2 on my machine but when I am trying to uninstall 2012 sql server from my machine its giving an error regarding unsupported OS. However as mentioned earlier I have Windows 2007 Ultimate SP1 (64-bit) installed
on my machine which is included in valid platform for sql server 2012. Also I installed visual studio 2013 on my machine but it existed with error SqlServer\LocalDB not installed.

Hi pritamk,
According to your error message, as other post, you can uninstall SQL Server from command line, inaddition, another workaround is that change the compatibility mode of setup.exe to Vista SP2, then run “Remove” option from the control panel. You can refer
to the following steps.
Browse to your SQL setup bootstrap folder, For SQL Server 2012, this is the path "C:\Program Files \Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\".
Go to Setup.exe file and right click on Setup.exe. Then go to properties and click on "Compatibility" tab. Under "Compatibility mode", click on Run this program in compatibility mode for "Windows Vista (Service Pack 2)". Then Click on "Apply" then "OK".
After that go to control panel -> Programs and Features -> and remove SQL Server 2012
There is similar issue about uninstalling SQL Server 2012 RC0 from control panel. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Unable to uninstall SQL server 2008 r2

i try to remove sql server management studio 2008 r2 ,but the following error occur
Sql server setup has encountered an error when running a windows installer file.
windows install error message : Another installation is allready in progress.Coplete that installation before proceeding with this install
windows installer log file : C:\Program File \Microsoft SQL Server \100\Setup

Hello,
If the suggestions provided by Shanky, if you still cannot install SQL Server, please
verify in Task Manager if there is any "msiexec.exe" process running, then click and end that process.
Another option is to unregister and reregister Windows Installer using the following two commands
on the Command Prompt:
msiexec /unreg
msiexec /regserver
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

Hello,
I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
Short story:
1. Manager hangs at "Loading Extensions"
2. Tried patching with updates, did not work
3. Tried finding the two subfolders, cannot find them at all in proper location
4. Cannot uninstall it from control panel
5. Need Help asap

You should delete EM Store and Database, then try again, you can find these folders under following path:
Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
Current user's Extension Manager CS6 folder: C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

Cannot uninstall runbook server

Similar Messages

Maybe you are looking for