Cannot wireless scan since upgrade to 10.8.4

Greetings:
Canon MG5300 Series - latest software and firmware
MB 4,1: running 10.6.8 and prints and scans perfectly via wireless network.
MBP 8,1: originally 10.6.8 and prints and scanned perfectly via wireless network - upgraded to 10.8.2 and no more printing yes but, no scanning from either Image Capture or Preview. Scans fine from vendor app.
Wireless printing is fine from either Mac and iPhone
USB operation is also fine.
What's changed? I've performed every suggestion I could find, but to no avail.
Any help would be greatly appreciated!
Thank you,
George

Thanks Eric for the response. I have done everything detailed in those instructions before - I tried them again, but to no avail. I feel that this is a ML issue
I can scan using the Canon software - but I cannot scan from either, Preview or Image Capture apps. When trying to scan from either of these apps, I get "AN ERROR OCCURED WHILE COMMUNICATING WITH THE SCANNER" Then all I can do is just close the window. Checking the system console logs showed no errors except for 1 instance of:
6/17/13 2:32:47.821 PM Image Capture Extension[579]: [2] Failed to register for death of process with pid: 591
I have no other wireless issues and as I noted before, it worked perfectly with Snow Leopard 10.6.8. Only after I "upgraded" to Mountain Lion 10.8.4, did these workflow productivity enhancements started showing up.
And yes, I clean installed 10.8.4 on a freshly formatted partition with no other software installed.

Similar Messages

My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

Check and see if there is an updated driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=4 41125&

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

5GHz wireless unavailable since upgrading E2500 to Firmware 2.0

My 5GHz wireless is unavailable since upgrading E2500 to Firmware 2.0. I did a complete reconfiguration of the router after upgrading. Anyone one have any ideas on how to fix this?
Ed

I carefully followed the steps suggested. I did a 30 - 30 - 30 second hard reset of the router, reflashed the firmware, then did another 30 - 30 -30 second hard reset. Then I carefully reconfigured the router manually. Still no 5GHz radio. I then called Cisco support and they took me through severaltests, configuration checks, and reconfiguration steps. They agreed that the 5GHz radio was not working. I will be sending it back for warranty repair/replacement.
I configured my Verizon cable router wireless so I could take the Cisco router out of service. I don't have the dual radios or the guest channel.
I think I may buy a wireless AP that is rated for small business usage. I'm not sure the "home user" wireless routers are sufficiently robust for what now is home use.
Thank you very much to everyone who responded with answers, advice, etc. Much appreciated.
Ed

Cannot access wifi since upgrading to ios5.1

I upgraded to IOS5.1 this morning. iphone 4S was fine, but ipad wifi did not reappear on completing the upgrade and when I enter my password, it says cannot access network. None of the details of the network are listed except for the DNS and I can't manually enter them. Anyone have any ideas or similar problems?

I'm seeing the same problem. Running iOS 5.0.1 both my original iPad and my iPad 2 were rock-solid on my WiFi network. Since upgrading to 5.1 neither device is able to connect for more than a few minutes. Device connects on a reboot or when resetting the WiFi settings but after a minute or two the network just disappears and the iPad says it's unable to connect. My iPhone 4 and 4S both work fine on the network with 5.1. This issue appears restricted to iPads.
Is Apple aware of this issue?

Cannot configure wireless printing since upgrading to Lion OSX with HP Envy.

Downloaded latest version of install for Lion OSX 10.7 and stil cannot find device on the network despite software succesfully downloaded, Mac is connected and printer is connected to the network. Just can't find each other. Been trying to figure this out for over a week. Please help me. Other solved posts do not help me. Thanks.

What version of iPhoto?
Any messages in the Console?

Cannot print to wireless Epson since upgrading to Snow Leopard 10.6.3

HELP! Never had a problem before with Tiger! I reinstalled both Snow Leopard and printer. It will print a test copy after printer installation, but not from the Mac. I've tried printing a photo and document. Also, I lost my paper presets - can't find the photo paper!

The first thing to do is run Software Update until there is no more software to install. You should be at 10.6.6, and have all the printer updates installed. Once that is done, try resetting the printing system and reinstalling the printer. Then check that your driver is the proper one by seeing what it says in Options & Supplies. If it is not a driver from Epson, see if you can choose it manually there.

Fails to scan since upgrading to Mavericks

early 2008 iMac upgraded to 10.9.4 from Snow Leopard 10.6.8 (20 hrs download time + 1.0 hr installation)
Canon Pixma210 all in one, MP Navigator 1.0
"MP Navigator EX quit unexpectedly" is the Problem Report title that crops up when I attempt to scan now.
I cannot determine if I need to update the drivers or if there is some other software/hardware incompatibility.
Attempts to Reopen from the report dialogue box all fail.
The report has been sent to Apple but I don't know how they handle these issues.
The Canon site says OS 10.9 drivers may be included in OS software or no drivers are available - quite vague.
I attempted a workaround by starting with Leopard (option while restarting to select external drive with Leopard) but I don't have the Canon software installed there and my CD/DVD drive no longer accepts CDs so I can't do an installation now.
From the problem report (I copied the entire report):
Application Specific Information:
" *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0xd6c900' "
A translation of what this means and how to fix the problem would be appreciated. Thanks.

You are welcome.
How much RAM do you have installed? I have an early 2008 iMac and Other World Computing has tested the computer so that you can upgrade to 6 GB RAM, which I have done. Made it better than the 4 GB I had.
Other World Computing
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Cannot publish changes since upgrade to iWeb09

Hello,
I created and edited a website using iWeb08, and then upgraded to 09. I made some changes including deleting photos and adding new ones, and tried publishing directly to my (non mobileme hosted) site. This failed -- it seemed to be ok but then no changes appeared, so I republished the whole site and it said there was a problem communicating to the ftp. Then I published to a folder and uploaded the assets.http file, index.html file, and the file with all the folders to my ftp directly. No changes have appeared even after clearing the cache!
Please help me

I should rephrase the problem-
-I cannot double click on anything! even if I go into iphoto and double click on a photo I want to see, I have to do the alt+click(right click) to open the photo!, this also happens for any folder(or the HDD icon) on my desktop. This only happened after I upgraded to leopard (2 weeks after purchasing my new macbook). I will try to log on as a different user and report back. Thanks

HT4972 Cannot access mail since upgrading my ipad2 to ios6

I just upgraded my iPad 2 but now I cannot get any of my emails. Any ideas of what I can do to fix this?

I'm sorry if not because I had the same problem on iPad 3
But now I enter the music or video app and download from iTunes

Can't print over wireless router since upgrade to Leopard

I have an iBook and a G5 tower. My Epson printer is connected to the G5, and for several years I've been printing from the iBook over my Linksys WRT54G router. I just upgraded the laptop to 10.5.2 (from 10.3.9) and I can no longer print via the router.
I've tried setting various configurations, nothing works. Used the router IP address, the G5 IP address, "my-Computer.local" etc. I've tried it with Internet Printing Protocol, and Line Printer Daemon. Also, I installed new drivers from Epson, but they don't show up in the printer configuration window. I only see the Gutenprint driver for my printer.
Is there any way to make this work? Thanks.

I had the same issue with the MP620. I found an "answer" in another forum... but I'm not 100% happy with it as it requires changing the firewall setting to all ALL incoming connections. FYI, the guy that posted this info, never posted the direction on how to create the exception.
" I was having the same problem. What it turned out was that the default mac os x Firewall was preventing me from seeing the printer. Try following these steps and see if they help. This was for Max OS X 10.5:
1) Click the 'Apple' button in the upper left-hand corner
2) Choose 'System Preferences...'
3) Click the 'Show All' button at the top to make sure you are seeing all the options
4) Under the 'Personal' heading, pick the 'Security' button
5) There are 3 tabs at the top, choose 'Firewall'
6) There are 3 options, try picking 'Allow all incoming connections' (the first option). IMPORTANT: this will make your computer less secure if you don't eventually change this setting back to 'Allow only essential services' so please remember to do that after you finish (see step 13).
7) Now that your firewall is disabled, lets try to add the printer
8) Click the 'Show All' button again to get back to main System Preferences page
9) Under the 'Hardware' section, choose the 'Print and Fax' button
10) If you see the 'MP620' series under the printers list on the left, delete it by selecting it and pressing the '-' button underneath.
11) Insert the Canon CD and repeat the install process (or download the drivers from the canon website). Please be sure to follow all the directions in the manual but this time it should work.
12) Check that the printer works. If not, there are other things you can try, just post a response and I will follow up.
13) Re-enable your firewall by selecting the 'Allow only essential services' tab under the 'Firewall' tab of the 'Security' menu.
14) Check that the printer still works. If it doesn't, you will need to either keep your firewall disabled or set an exception. That is a little more complicated and I can post those directions if somebody asks about them."
Hope this is helpful and if someone can find the exception... also post it"

Cannot send MMS since upgrading to iOS4, even though the option is there

I have upgraded my 3GS phone to iOS4 and all is okay except I can't get a MMS to send. The option is there in settings which is switched to ON, I have the camera on the text message screen, but each time I try to send a MMS it stops a little from the end of the progress bar and I get a red circle with the exclamation mark in it - message send failure!
I have restored my phone, turned it off and back on again - any clues anyone?

Sorted - its a service provider issue, in my case O2. I called tech support and they gave me new settings to add into the network settings fields and it now works.

Help, can't access wireless networks since upgrade. Wireless network button won't slide to on

Wireless access button not sliding to on. Overseas can't use date network, would cost a fortune.

Hi there Jlhush,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
-Griff W.

Since upgrade, unable to watch tv

Since upgrade, I am unable to watch tv. Have downloaded
flash player and still cannot watch tv

Sure would be nice to get help with this problem. Cannot watch tv since upgrade, and cannot seem to get help

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Cannot wireless scan since upgrade to 10.8.4

Similar Messages

Maybe you are looking for