Canon 5D mark2 video: which preconfiguration and exportation / original

please which sequence preconfiguration for project with canon 5D mark2 video (avchd 1080p30 or avc-intra or another?)
and which exportation for create a video with the same original quality? (mpeg2?)
thank you very much
i'm french

I'm amazed that the "I can't edit 5D Mark II video with Premiere" cries are still surfacing. C'mon folks, that problem was solved months ago. OK, it's true, you have to spend an additional $99 for a utility (I'll mention that shortly), but that's life, every software package can't support everything. The problem is partly QuickTime, don't 100% blame Adobe. If you bought a 5D2 and want to produce video, you need to be ready to invest in some things, no getting around it.
First, the 5D2 puts out 1080p HD clips in H.264 at 30FPS, not the 29.97 NTSC standard. Keep that Post-It stuck on your forehead for a minute. Now, here's how to edit smooth and wonderfully in Pr CS4:
Go to VideoGuys.com and buy Cineform's NeoScene for $99.
Open your 5D2 .mov file with NeoScene, and hit Convert.
NeoScene will produce an .AVI file that will easily edit in Premiere. The .AVI file will be bigger in size than the raw 5D2 file, and will be interpolated from 4:2:0 to 4:2:2 (8-bit to 10-bit), just FYI. It's interpolated, don't expect miracles, but to me the video looks a bit better.
Import the .AVI into Pr and have fun. PrE should equally work I would assume.
That's it, simple! BTW, someone mentioned VLC... yeah, it plays video smooth, and the video quality looks like a busted cellphone recorded it.
OK, couple of items:
If you record your audio to a .WAV separately like I do, just tweak your speed to 99.9% on the .WAV and all will be in sync. The 5D2 has rotten S/N ratio even with an add-on XLR converters; don't muck with on-board sound, just shoot your video on it. The Zoom H4N is a superb solution to record sound separately. OK, remove Post-It Note.
I assume you have some horsepower in your PC. If you're running an older dual core with 1GB ram and a single hard drive, game's over. You need power to edit. Get on the Black Friday deals and get some form of an i7 rig if you can with at least ONE separate hard drive for your assets, and 6GB of ram minimum (12gb is better).
Windows 7 Windows 7 Windows 7 Windows 7 Windows 7 Windows 7 Windows 7 Windows 7 Windows 7 Windows 7
See #3
Win 7 plays many formats natively. WMP plays my raw 5D2 clips as smooth as silk. It's also AVCHD native (Win 7 that is).

Similar Messages

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

Embedding video in KN3 and exporting to SWF

G'day.
I have KN3 on a PB G4 with QT7 Pro and iLife '05. I'm using iMovie to create a credit role video for the last slide of my slide deck with the intention of embedding narration and exporting the whole caboodle to a SWF file. I'm having problems finding a video format that I can import into KN and then export to Flash: all the formats I've tried have caused the export process to puke and fail.
I posted this to the applekeynote Yahoo! group earlier in the week and Brian P (waves) provided some useful pointers, but I'm still stuck. With that in mind, I'm wondering whether you guys could have a think on how I might do this.
My question: how do I create video and import it into KN3 in a way that Flash export will be successful?
Thanks very much.
Cheers.
Pete

As far as I know, the Keynote export does not support video, only images and text (and, new with version 3, mp3 audio!).

Problem embedding video in Pages and exporting as epub

I'm using pages 09 ver 4.2 (1008). I' trying to embed video (.m4v and .mov) I can't find the checkbox 'Copy audio and movies into document'. The user guide says it's an advanced option on the 'save as' but my version of pages runnning on Lion 10.7.4 doesn't have a save as'- just a 'save a version. It apparently does auto save).
I'm using Book Proofer to send the epub generated by Pages to my iPad. The strange thing is that some times the videos work and then I add another and one that used to work don't even appear when viewed on my iPad.
Any one had experience adding video (eother m4v or mov files using pages and exporting as a epub?
Thanks for any insights!
Steve

As far as I know, the Keynote export does not support video, only images and text (and, new with version 3, mp3 audio!).

How do I import a video in mp4 and export in QuickTime H.264?

Or is that even possible? Whenever I try I get a error "Incompatible codec..."

It's one file that was produced in a different video software that I used before purchasing Premiere Pro.
Most of it is composed of a series of stills, though there is a portion that is video (mp4 from the old software). I'm assuming I might have better luck creating a new video and exporting it in that format by importing the stills and video and working with them in Premiere Pro.

Error -49 video rendering, compression and export

I am having trouble compressing files from iMovie, When I try and "finalize" the video I get an error message. When I compress the video using quicktime H.264 and ACC the issues may be with rendering (?) I have managed to save a .mov file to my desktop but this goes juddery and the sound doesn't work when burnt onto a disc. Disc works fine when saving as video but not when saving as a data (.mov) file.
I have tried using internal burner software and also using toast (version 8) neither will produce good data files on the burnt disc.
Any help?

Im having error -49 (I have the time machine off, it has been like that all the time) and -108, but the one that appears more is -108, I've seem that is because of the space, but I have enough space base on the information of my MacAir.
Im very new with this but I'm so frustrated with all these issues, cannot export a video of 16min and is just 69.9MB.
Is there a way to know specific where are the problems in the video?
I will appreciate all your help!!

Sharing 60 min video, high res and export to compressor settings

I have 60 minute dance concert video shot HD on memory card. Footage is 1920x1020. I tried to share using quicktime and file summary says 8gb..it takes 2 hours to "share" as h.264.....last 2 attempts it says file to large to save . To share as pro res (default) the file summary says 60 gb....should I get 32 gb flash or try to cut the footage into 2 projects, share separate and then try to merge during compressor? If I get past this hurdle I have more questions to improve DVD quality......

martinstartin wrote:
...In the sequence settings window under quicktime video settings, if I change this to H.264 instead of HDV 1080i50, will this work?
Do not alter your sequence settings. Leave the as they are.
On File>Export>Quicktime Movie or File>Export>Using Quicktime Conversion you'll have lots of options.
One of them is indeed h264. Of which in the other post is said that it s supported with windows.
You could export as h264, then rename the clip from Clipname.mov to Clipname.flv
Then flashplayer (installed on most computers) can play it.
If you really want to go to .wmv you'll need [Flip4Mac WMV Studio|http://www.telestream.net/flip4mac-wmv/wmv-studio.htm] (or Studio Pro or Studio Pro HD)

Best Practises ►Repurposing videos with Captivate and export as SCORM

I'm new to Captivate and SCORM. I have a series of 6 basic video Lessons (MP4s) which make-up one Course. Lerners must complete (pass a summary quiz) each lesson before they can move on to the next. We want to repurpose these files to create a more immersive UX. I'm looking for a "best practices" suggestion for this work.
Currently the plan looks like this:
Re-edit existing videos into sets of smaller clips.
Create Captivate project/s using the edited clips and adding other Captivate tools/features e.g. navigation, quizzes etc.
The Captivate project/s will be exported/saved as SCORM package/s.
We will up-load the SCORM package/s to Moodle.
I'm very new to this, I've not yet created a SCORM-based Moodle project, and am not clear on how they "work," but that's for the Moodle forums.
Should I create one large "Course" with Captivate that contains all of the content from all 6 MP4s? This will require us to rely on Captivate's functions to control access to each lesson. Each lesson has a summary quiz; learners must pass each quiz before they can move to the next lesson. This one SCORM package is than imported into one Moodle course.
Should I create six smaller "Lessons" with Captivate that contain only the content from one MP4? This will require us to rely on Captivate's functions to control progress through only one lesson. The summary quiz will be 'administered' by Captivate/SCORM. When the learner passes the summary quiz the lesson is complete. We will rely on Moodle's access control functionality to then provide access to the next SCORM package.
If anyone has experience with this sort of project, or can offer some advise I would appreciate it.
Thanks
Larry

While I cannot claim enough expertise to state these are best practices, I offer them as food for thought as you work out your implementation. We use Moodle and Captivate in combination. We do kindergarten to grade 12 curriculum and we realized that there is a huge number of lessons that can be repurposed for multiple grade levels and we also have more than one copy of many of our courses.
What we decided to do was to use what would be equivalent to a repository for the lessons portions. These have interactives in them for practice of the new concept but they are not scored. Our many courses that use a particular lesson can then link to the one instance of the lesson from the repository. This saves us a lot of disk space, development time in new course builds, and if we need to fix or update the lesson we merely have to do it once. Those are huge benefits.
Anything that will score to the grade book runs inside a course so the SCORMs can 'talk' to the course the student is in, so homework, quizzes, and tests are housed inside Moodle courses.
We can place links to the repository lessons easily into the SCORM final landing pages of after the pretest or provide the ability to link to the lesson as feedback if a student is having trouble with a particular question.
We are also starting a project of building interactive walkthroughs for each problem that will be housed in the reporitory. If students get stuck, they can be linked out to the walk through. This is a great way to do these because their homework will not have to be weighted down with a walk through for every problem. That will make them faster to load, but yet when they do need a walk through we can link them out from the SCORM to the deep and interactive added support for just what they need.
So far, this setup has worked well for us. We are not expecting any major changes such as a new domain name on the repository. If your repository domain name or server structure for your repository is likley to be in flux, then this setup is not ideal.

Flickering video in timeline and export from premiere

I called tech support, and they said on Friday (07.18.2014) that they would call me back monday, and then never heard back from them.
Anyway, I need to downgrade from Adobe CC2014 Premiere back to the previous version of Premiere, and I have to do it immediately. The upgrade from CC to CC2014 has resulted in flickering video in the timeline and the final render, I can't figure out what it is except to say that it didn't do it before I upgraded.
If anyone can tell me how to get back to a lower, more stable version, I'd appreciate it. I don't want to use a crack, and I am paying for the service - I need this issue to be addressed right away, or to get back to a stable version while I wait for them to make CC 2014 more stable. If my only choice is to use a crack, someone just say so, and when the upgrade becomes more stable, I'll go back to it.

So, I was never actually provided with a fix for this, just a workaround that doesn't really satisfy outside of getting a clean render. They had me change my sequence settings to 25 FPS (???), which I would never have thought to try on my own, since I don't shoot, edit, or output in that setting. That said, if I edit in a sequence that is 25 FPS, but export at the 23.976 that I shoot in, I get a clean render. This clean render, however, has only happened once, and I have no idea if it's going to be consistent. The reason that this works was never made completely clear to me.
That said, I'm sticking with Premiere CC for now, until Adobe can fix the software to work the way it's supposed to. I honestly don't expect this to be fixed, so it may be next year before I update. I also received bad advice from the person running the twitter account (they told me I could "save as" to get a file out of CC 2014 that would work in CC), and I lost about three days of work trying to get a flicker-less render (1.5 days on trying to fix it myself, and another almost 1.5 days total trying to get results out of tech support, who said they would call back on Monday, but never did).
No rant here, those are the facts. Buyer beware on upgrading...make sure to have a backup installer for a previous version if you feel like you want to try upgrading.
Lastly, the link posted by John Smith doesn't work for Premiere, although the link I posted in response to him, does.

How do I get my videos imported 1080, and exported as 1080?

I have no idea what I am doing wrong. I have a GoPro hero3 black edition. When I import I import into imovie, make my movie, and whenver I want to export to youtube, quicktime, as a movie, etc., it never gives me 1080 option. I upload it to youtube and the 720 looks like crap. Grainy and not what I see when I am editing the movie. I want to be able to have it be clear in 1080 but this is really getting on my nerves...
Anyone?

Oh, unless you shot tall.
If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
Shoot wide, or edit in a different editing app.

Canon 7D or 70D, which one and why?

I am looking into purchasing a new camera body, the 7D or the 70D obviously and I cannot decide which one to get. U have read/watched countless reviews and comparisons but they dont really help me that much. I mostly photograph landscapes, travel photos, and my dog (who is still a puppy and moves around very fast). I currently own a T2i.
From what I've read, the 70D is a lot better at videos but I almost never shoot videos so the video quality is not very important to me.
Body - T2i
Glass - Ef-S 60mm f/2.8 Macro USM, 50mm f/1.8 II, 18-55mm kit lens, 55-250mm f/4-5.6 STM

JWalker175 wrote:
Thank you, for low-light indoor photographs which camera performs better?
The cameras have similar performance in low-light. The 70D has a newer sensor and has an edge over the 7D, but it's not an enormous difference. In side-by-side comparisons you'd probably see the 7D is slightly nosier ... if you look at the images long enough.
Lens selection makes a big difference here. If you're shooting in low light, use a lower focal ratio lens.
Suppose you're taking a photo using the kit zoom lens (18-55mm f/3.5-5.6) and using 50mm. The lowest possible focal ratio for that lens, when using the 50mm focal length, is going to be f/5.6. -OR- you could use your 50mm f/1.8 which is able to do f/1.8.
Dropping from f/5.6 -> f/4 is one stop.
f/4 -> f/2.8 is another stop
f/2.8 -> f/2 is another stops (so that's 3 full stops)
f/2 -> f/1.8 is 1/3rd stop.
That's a total of 3 1/3rd stops. Each "stop" doubles the amount of light the lens can collect when the shutter is open... combine those stops and the f/1.8 lens is collecting nearly 10x more light as compared to the f/5.6 lens. The problem with f/1.8 is that it also has a very shallow depth of field so depending on how much you need to keep in focus beyond just your focused distance it may not be suitable... perhaps you back off to f/2.8... or perhaps you back off to f/4 for more depth of field ... but f/4 is still twice as much light as f/5.6.
Tim Campbell
5D II, 5D III, 60Da

I made a video on iMovie and exported it but, I need to change some things and it is not in iMovie anymore. How do I get it back for editing?

Guys I really could use some help

You may be experiencing the "disappearing project" issue. Projects can be seen in the Finder in their default location (as described by AppleMan1958), but do not appear in the listing of projects in iMovie's Project Library. See this thread for more information, and also the links therein to other threads regarding this issue:
https://discussions.apple.com/message/21436422#21436422
Unfortunately, I'm not aware of a resolution to this problem. Hopefully, it's not what you are seeing!
John

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

How to export .MOV in desired video pixel size and in a centered format.

I am running Windows Vista Home Premium SPK2 and Quick Time for Windows Pro Version 7.6.5 the latest release.
I have a series of Quick Time .mov files which were shot at HD using a Canon Mark II EOS 5D camera. In total its about 28 GB of .mov files seperated into 78 different .mov clips. The movie inspector says they are .H264 format at 1920 x 1080 pixels
When I look at the QTM Other Properties Visual Settings it tells me the .mov Transformation for Normal, Display and Scaled is 1920 X 1080 pixels. I have checked 'Preserve Aspect Ratio.
I have figured out that I can drag all the individual clips into QTP thus making a single complete movie so to say. However, I have not been able to figure out how to convert this into a mpeg file (compressed ) that will display normally both on a PC when burned to DVD or to play on a standard DVD player or even play at the correct size on a PC.
*Playback size not correct:*
It also does not display at the requested size when the mpeg file is played natively on the PC wheter using Video Lan, Windows Movie Player, or just clicking on the file and letting IE open it. Their also seems to be a centering issue in which the movie is not centered in the playback window but rather is positioned in the upper left corner, theirby leaving white space to the right and bottom of the player. The original .mov file which I can view in QTP does not have this problem. In fact I have to use the Half Size option so as to view it entirely other wise its too large for my standard PC display.
I want the completed movie to appear similarly to what one would get if they were to purchase a DVD movie at the store.
I have gotten it to export in two different sizes reducing down to 256mb and 576mb respectively but both resulting mpeg files display smaller than I desire. The larger one is suppose to be displaying as 1280 x 720 pixels but does not appear to be doing so It appears more like 640 x 480 image. Also neither finished mpeg shows centered in the playback screen.
My Export Options are set as:
Movie to MPEG-4
File Format: MP4
Video Format: MPEG-4 Improved
Image Size 1280X720 HD
Preseve Aspect Ratio using Fit Within Size
Frame Rate: 29.97
Key Frame: Automatic
Resync Markers
Yes, I also tried one using the H264 option at the larger 1920 x 1080 HD format which should be the native QT format according to the movie inspector properties and likewise it does not correctly in size and in fact is blurry.
How does one take a .mov file and convert it so that it can be
centered correctly, burned onto a DVD and play like a commercial DVD does.
I have also tried Womble.com MPEG Video Wizard DVD 5.0 which does make a DVD which will play on a PC with the same incorrect video display image settings. It will not play on a DVD player.
Thanks for your assistance.

SOLUTION
I discovered that the begining graphics of my video which were set at 1280 x 720 pixels were causing the entire video to be reduced in size. I recreated the opening graphics at 1920 x 1080 pixels added in about 90 frames of each graphic ( 3 seconds each ) and the video now converts to mpeg4 at 1280 x720 pixels filling the video screen.
Later on I will test it at the full 1920 HD conversion and report back what I find.

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Canon 5D mark2 video: which preconfiguration and exportation / original

Similar Messages

Maybe you are looking for