Canon ImagePROGRAF W6400 no longer recognized

Needs 64-bit drivers. Someone please prod Canon for driver support.

whoops, no video on camera because I am dumb.

Similar Messages

My Canon EOS is no longer recognized by iPhoto.

I have been using my Canon EOS with my iMac OSX Version 10.8.5 and recently iPhoto stopped recognizing it. I am unable to download photos. I have to copy them from the memory card. At the same time, Dropbox is recognizing them and a window pops up when I plug in my camera and turn it on, asking me if I want to upload to Dropbox.
Has anyone else had this problem? How can I get my Canon EOS recognized by iPhoto again?
Thank you.

Get the photos off of the card and then reformat it using the camera's format command and try again
LN

Canon HF20 is no longer recognized

I recently updated to iMovie 09 and have successfully imported movies from my Canon Vixia HF20. Now when I try to do this, the camera doesn't show up in the import window, just the iSight. The camera is definitely connecting because I can see it mounting on the desktop and can access it's files.

whoops, no video on camera because I am dumb.

Canon SX260HS no longer recognized by iPhoto

After upgrading to Mavericks my Canon SX260HS is no longer recognized by iPhoto. When plugged in to a USB port the system report shows the camera, but iPhoto does not mount the camera. The camera briefly displays "communication error" on its display. The SD card can be read by using a standalone card reader attached to another USB port. Looks like some change to the camera communications in Mavericks is at fault, but other than using a card reader I see no solution. Help?

tulsamini:
Wow. You've answered nearly all the questions I was going to ask. What version QT are you running?
Try logging into another account on your Mac and see if the camera can be recognized there. If it is then there's an issue with your primary account. Also try booting into Safe Mode and again check to see if the camera can be seen in your primary account.
Booting into Safe Mode runs the File System Check (fsck) during the boot and only loads the basic minimum extensions, etc. needed by the system. See What is Safe Boot, Safe Mode? (Mac OS X). Again this will see if there's something that you've added that is causing the problem.
A workaround until you find a solution is to use a card reader. IMO, it's the best way to upload from a camera.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

De-install Leopard Because Cameras/Scanners/Itouch No Longer Recognized

Leopard no longer recognizes my Canon SD600 or Epson 3170 in Image Capture. The whole OS has a MS instability feel. Itouch is no longer recognized. What's up??
Anyway Is there an easy way I can back out of the Leopard upgrade without blowing away all of my date files?

Hi Chris Metz;
If you restore the backup you took before the upgrade to Leopard, that is the easiest way to get back to Tiger.
I have to say that none of my systems or those that I help to support are suffering from any problems with Leopard.
Allan

After loading OSX 10.9.2, my Canon printer is no longer found when trying to print from my MacBook Pro.

After loading OSX 10.9.2, my printer is no longer recognized by my Mac. I have a Canon MG 7120 and it is connected wirelessly.

Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
if that doesn't work there are a few options
look on the printer manufacturer's website for an updated driver
see if Gutenprint for Mac OS X has a driver
see if your printer will work with AirPrint or a generic driver. See: OS X Mountain Lion: If the software for your printer can’t be found (the reference says Mountain Lion but it still applies for Mavericks.)
go back to Mountain Lion
get a new printer

My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes.

Hi There,
The title actually says it all..
(My 4th Generation click wheel 40 GB iPod is no longer recognized by iTunes 7.4.2, although the iPod works fine.. iTunes keeps saying to reset it, but I don't see why I should)
The iPod seems to work just fine, so I'm not in a big hurry to erase all my songs audio books etc..
I am thinking that this is a problem with Macintosh iTunes version 7.4.2, from what I'm seeing, but how should I proceed?
Many thanks for any help.
Eric

Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you. Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
B-rock

IPad no longer recognized by any computer after 4.2.1 update

Hi,
my iPad is no longer recognized by any computer after the 4.2.1 update. It does not show up in iTunes and this even in recovery mode. When connected to charger it does not show that it would charge (but it does). The iPad is still usable except in the iPod app is says "cancelling sync" and does not show any music.
I already reinstalled iTunes, reinstalled the Apple Mobile Device Service, used different computers with different OS version, but it does not show up, not even in the system profiler (USB tab).
Any idea what I should do? I mean it is quite unlikely that there is a hardware issue as the problems appeared right after the 4.2.1 update (from 4.2).
Thanks in advance

Yes I know, I already reset like 100 times. Turned off-on...
I guess a recovery could solve the problem, but how do it if the iPad does not even appear in iTunes. I guess it is somewhat stuck in "cancelling sync" and therefore will not accept an USB connection (the USB port behaves like it is deactivated).

HELP!!! External eSATA no longer recognized by DVR

Hi, I am experiencing a problem with my external WD eSATA harddisk. The setop box was recognizing it perfectly and I was recording programs with no problem. Suddenly the DVR does not show the drive any longer. I tried unplugging and rebooting. Did not fix the issue. I need help: what should I do???

Xpetepan wrote:
Hi, I am experiencing a problem with my external WD eSATA harddisk. The setop box was recognizing it perfectly and I was recording programs with no problem. Suddenly the DVR does not show the drive any longer. I tried unplugging and rebooting. Did not fix the issue. I need help: what should I do???
I had the exact same thing happen and you aren't going to like the answer/solution. One day my eSATA just disappeared, the DVR no longer recognized it. I unplugged, rebooted, reset, reconnectedetc. etc. and nothing. So I thought it was a DVR issue , after working with Verizon Customer Care Verizon sent me another 7232. I connected the eSATA to the new 7232, alas still nothing, it was not recognized. Turns out it was not a DVR/FiOS issue, the eSATA went bad (after 12 stinking days!!!!!!!!!!!!!!!). Western Digital eSATA's are junk. I contacted Western Digital and they sent me a new eSATA (if it is still under warranty they will replace it for free BUT you have to pay all shipping costs), I connected that and it works just fine (but I am holding my breath, it has been 11 days since I connect the new one).
If the eSATA is bad you need to contact that Western Digitial, NOT Verizon. If it is bad it is not a Verizon problem.
And the Verizon In Home Agent is pretty much useless, that did nothing except waste a lot of my time.

Since installing Leopard, my iPhone is no longer recognized by iTunes.

Since installing Leopard, my iPhone is no longer recognized by iTunes and cannot synch, my music, videos, address book, and calendar. Could you let me know how I can get iTunes to recognize my iPhone again? It is odd since i plug the iPhone into the iMac and it is no longer recognized in iTunes and my address book and calendar. It worked fine before installing Leopard. You assistance is greatl

Hi
Have you tried the iPhone forum yet:
http://discussions.apple.com/category.jspa?categoryID=201
Steve

My first generation ipad no longer recognized by itunes 12.1.2.27

I just recently updated iTunes to 12.1.2.27 now my first generation iPad is no longer recognized.
iPad Model MC349FD / Mid 2011 iMac 3.4GHz, 32GB ram, OS X 10.10.3

Hello there, Blueye3355.
The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
Apple - Support - iPad - iTunes Assistant
http://www.apple.com/support/ipad/assistant/itunes/
If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

IPhone no longer recognized by ITunes, and Service is not starting

Hi
My IPhone is no longer recognized by ITunes. I already tried the steps on http://support.apple.com/kb/TS1495, but had no luck, and I also tried to remove all relevant Apple software and reinstall, but this did not result in anything either.
Now, also, if I start up ITunes, it tells me, that the "Apple Mobile Device Service" is not running. Trying to start this service by hand, did not work. Following the rules on http://support.apple.com/kb/HT1923 did not work.
I am running Windows 7 Professional 64bit, my ITunes version is 9.0.3.
This is my third PC in this household this has happened (i switched the PCs after it appeared on my other PCs), and I am simply not willing to do that again.
Please, if anyone has an answer, it would be greatly appreciated.
cheers, Roland

http://support.apple.com/kb/HT2553 as a last ditch effort but if it has been recognized by computer before and you did everything in HT1923 and TS1495 then i would say like msconfig stuff or disk cleanup and such.. it would be worth it to contact apple tech support if HT1923, TS1495 and HT2553 doesn't work.

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Ipod Touch 4G is no longer recognized by Itunes

pod Touch 4G is no longer recognized by iTunes
Today have been the problem that my ipod touch 4G is no longer recognized by itunes. He'll appear in My Computer as a DigitalCamera etc, but not in itunes. I've already uninstalled Itunes + Ipod rebooted and then installed it to try a different USB port + different USB cables, all useless. No jailbreak.
Got it now put into DFU mode and restore to read, unfortunately it is still not recognized by my PC but only on the laptop so I must go to my mum´s Laptop and everything transferred from there again ... pity me here is displayed only when the restore Ipods "Can not restore: errorcode 21" or something like that.

I've now uninstalled the USB device driver but now my iPod listed as a "portable device" and no longer listed under Apple MobileDevice

Canon ImagePROGRAF W6400 no longer recognized

Similar Messages

Maybe you are looking for