Cant connect to Oracle database using oracle db client
Hi All,
I recently created a virtual machine running windows server 2008 on my windows 7 host. Oracle database 11g is already installed on host OS(windows 7) and I have installed oracle 11g client on the guest OS(windows server 2008) and trying to connect to oracle database from remote server using oracle client but getting this error:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATAI am trying to connect using oracle client as below:
C:\Users\Administrator>SET ORACLE_SID = HR84DEV
C:\Users\Administrator>SQLPLUS /NOLOG
SQL*Plus: Release 11.2.0.1.0 Production on Fri Feb 10 06:16:34 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> CONNECT SYSADM/[email protected]
ERROR:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I have created database with name - HR84DEV
HOST ip address is - 192.168.56.1
I googled this error and as most of resources/blogs talked about having correct entry on listner.ora and tnsnames.ora file, I did the changes on both of these files accordingly.
PFB the cotent of both of these files:
tnsnames.ora
# tnsnames.ora Network Configuration File: C:\MyApps\Oracle\product\11.2.0\dbhome_\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.1)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
HR84DEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = HR84DEV)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
listner.ora
# listener.ora Network Configuration File: C:\MyApps\Oracle\product\11.2.0\dbhome_\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\MyApps\Oracle\product\11.2.0\dbhome_)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\MyApps\Oracle\product\11.2.0\dbhome_\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = HR84DEV)
(ORACLE_HOME = C:\MyApps\Oracle\product\11.2.0\dbhome_)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\MyApps\Oracle\product\11.2.0\dbhome_\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.1)(PORT = 1521))
ADR_BASE_LISTENER = C:\MyApps\Oracle
Please not that I dont have any problem in connect to database locally.
Thanks Nicolas,
Actually, there was a problem with my oracle client installation. I uninstalled it and then installed back again but still, even after following your instructions I get some error.
Here what I did:
Created tnsnames.ora file as below:
HR84DEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = HR84DEV)
Placed it under appropriate directory and then checked the connection with database using the command shown below:
C:\Users\Administrator>tnsping HR84DEV
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 10-FEB-2
012 08:42:03
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\MyApps\Administrator\product\11.2.0\client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.56.1)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = HR84DEV)))
OK (20 msec)
Then tried to connect to database as below:
C:\Users\Administrator>SET ORACLE_SID=HR84DEV
C:\Users\Administrator>SQLPLUS /NOLOG
SQL*Plus: Release 11.2.0.1.0 Production on Fri Feb 10 08:25:56 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> CONNECT SYSADM/SYSADM@HR84DEV
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
But still getting error.
I Googled this error and tried to figure out what the problem is and came across the possible cause which is because I haven't specify that the service should run as a user who is in domain admin group.
well, I am not really sure about this and dont know what user name and password I should enter in OracleserviceHR84DEV-properties-log on-this account.
do I really need to set this?
Similar Messages
-
Hi,
I developed one web application using oracle database. I want to implement same web application in android. My problem is how to integrate android application with existing oracle database using oracle database mobile server. Can u please guide me how to install oracle database mobile server and how to integrate android app with existing oracle database..
Thank you.In the Database Mobile Doc set there is an entire book that covers the Installation of Oracle Database Mobile Server. Chap 4 of that book contains screen shots and all kinds of information that will help guide you through the installation. We also have a doc on the different mobile clients. Chap 2 of that guide covers installs and integration of an android app.
thanks
mike -
Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64
Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---PrashantHello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this? -
Problem in connecting to database using oracle jdbc thin driver
hi
i am trying to connect to a database using oracle thin driver.
i am getting following error:
java.sql.sqlexception:Io exception: the network adapter could not establish the connection
Io exception: the network adapter could not establish the connection
the connection string has the property of using a dedicated server
for this reason i have put USE_DEDICATED_SERVER=ON in sqlnet.ora file...
we did not face this problem while connecting to other databases which do not have the property of dedicated server in their connection string in tnsnames.ora file.
please suggest a solution for this.
thanks and regards,
asifIf you are using the thin driver, sqlnet.ora does not come into play. None of Oracle networking does. That is one of the great things about using the thin driver, no need to have the client installed.
That error is due to incorrect connection info you are supplying or the machine you are connection from can't ping the machine it is trying to connect to. -
Connecting to an Oracle database using ASP
Hi
I am having problems connecting to an Oracle database using ASP. I am trying to do this for a school project the school's database server is running Oracle 9i. The repository is version 6. The web server I have access to only has ASP not ASP.net. What kind of connection string would I need to be able to connect to the database?You do need to ensure that the Oracle client and Oracle server are compatible, but that is generally pretty easy to accomplish. Unless you are trying to cross more than one major release (i.e. 9.2 client to a 7.3.4 database), you're pretty safe there.
You could try downloading and installing the latest 8.1.7.x Oracle ODBC driver from OTN on the machine with the 8.1.7 Oracle client (I believe the last ODBC patchset was 8.1.7.10), but I don't have particular confidence that that will solve the problem. If it doesn't, we can do an ODBC trace to focus in on the issue, but installing a new driver is a much easier process, so that probably ought to be the first step.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
How to connect Oracle database using TOAD Database toll
Hello ALL,
I have installed oracle 9i and TOAD in my machine.
I want to connect oracle9i using TOAD database toll.
How can i able to connect Oracle9i using TOAD database toll?What is the code i will change in tnsnames.ora so that i am able to connect scott/tiger database using TOAD?
tnsnames.ora*
SUMANTA.IN002.SIEMENS.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BLRD025AL1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sumanta)
Please suggest.
Thanks for your time.
Regards,
Sumantauser2367151 wrote:
Hello ALL,
I have installed oracle 9i and TOAD in my machine.
I want to connect oracle9i using TOAD database toll.
How can i able to connect Oracle9i using TOAD database toll?What is the code i will change in tnsnames.ora so that i am able to connect scott/tiger database using TOAD?
tnsnames.ora*
SUMANTA.IN002.SIEMENS.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BLRD025AL1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sumanta)
Please suggest.
Thanks for your time.
Regards,
SumantaIf you have a listener on host BLRD025AL1, and that listener knows about a service named 'sumanta', then you don't need to do anything to your tnsnames.ora to use it with Toad -- or any other client tool. You just have to provide the correct connect string.
What have you actually tried?
What result did you get?
Any oracle errors (ora-nnnnn or tns-nnnnn)? -
Cannot connect to database using Oracle Forms 10g
hi,
I had installed Oracle 10g database and Oracle Forms 10g on Windows Vista Home Basic. However, I was unable to connect to
the database in Oracle Form using scott/scott for database "orcl", with the following error message:
ORA-00604: error occured at recursive SQL level 1
ORA-01009: missing mandatory parameter
However, I could access to the database using this set of username and password. Am I missing something? Thanks.Hi,
After a successful installation of forms 10g in vista, I'm about to run OPatch Universal Installer for the patch 7047034
in order to fix the form bugs. However, I cannot run the command "opatch apply C:\oracle_form\Patch26_Rel_10105\7047034"
with the error "The Oracle Home c:\devsuitehome_1 is not registered with the Central Inventory.". Then I try to create a
oraInst.loc file, but not much change still. The situation is that oracle 10g is installed before oracle developer suite
10g, and when I try to set oracle_home to oracle 10g's path ("C:\oracle\product\10.2.0\db_1") and run "opatch lsinventory",
it returns the correct result; when oracle developer suite 10g's path ("c:\devsuitehome_1") is set as the oracle_home,
the same command would return a different result as "LsInventory: OPatch Exception while accessing O2O".
I've verified through Oracle Universal Installer that the Central Inventory has included both as oracle_home (oracle 10g
and oracle developer suite 10g). I'm very confused now, though it seems that the problem could be solved by registering the
Central Inventory with oraacle developer suite 10g's path. Thanks. -
How to connect oracle database using DSN from jsp
hello, can any know how can i connect to[b] oracle database using DSN name from jsp .I am using oracle 9i and Tomcat 5
Using odbc tool i have created the dsn name but ithe connection does not make .here is the code that i have tried
Connection connection = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
catch(ClassNotFoundException Exception)
out.println("error occoured during loading the driver ");
try
out.println("getting the connection");
connection = DriverManager.getConnection("jdbc:oracle:deepak","scott","tiger");
out.println("connection getted");
catch(Exception exception1)
out.println("error occoured ");
pls help as soon as possible
Sorry, for my englishyou are actually using JDBC so the DSN entry does not matter.
2 things.
Make sure that your oracle database driver is in your classpath on your tomcat server.
I.E. copy the file classes12.jar into your common/lib folder of tomcat, or into your WEB-INF/lib folder of your application. and RESTART your server. classes12.jar can be found on the internet or more easily somewhere within your oracle installation. just search for it.
Make sure your jdbc url is correct. I believe it goes like this.... fill in the blacks
connection conn = DriverManager.getConnection("jdbc:oracle:thin:scott/tiger@MyOracleHost:1521:MyDB");Note how the username are passed in the first string there fore there is no need to pass additional parameters. This method may be depriciated, but if so, just take out the user and pass from the string and continue to pass them as 3 seperate strings.
connection conn = DriverManager.getConnection("jdbc:oracle:thin:MyOracleHost:1521:MyDB","scott","tiger");That should get your connection. if not, post your errors. -
Hi All,
How to connect the Oracle database using C/C++ on Mac OS X? I have used Instant Client library "instantclient-basic-macosx-10.1.0.3" provided by the Oracle but could not be success. I'm using PowerPC G4, Mac OS X 10.4.9, and XCode version 2.4.1.
Specially Mr Oscar Armanini has done this in C on Mac OS X. Please let me know. I would be very thankful to you.
Thanks,
GhufranHi Ghufran
there are two Metalink Notes on using Instant Client with PowerPc Mac:
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=316497.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCI sample code - cdemo81.c)
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=332588.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCCI sample code - occidml.cpp)
The first Metalink Note uses an OCI examples and it is pasted here below,
in case you don't have a Metalink ID.
The second Metalink Note uses an OCCI example.
I have never used Instant Client (neither on Os X or on other platform),
but I was successful on compiling C programs (no GUI involved) using the
Full Client installed on my PowerBook G4.
I'm a DBA, but I was a developer years ago (about when Oracle 7.3
was considered a giant step forward): I installed the Oracle 10.1 db
(a complicated job for a developer) and I got the Full Client
installed as well, for free, so I was happy to compile one of the demo C sources
(those that you can find in the Oracle Pro*C manuals:
by the way, Oracle Pro*C manuals are really worth reading).
Good luck
Oscar
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.3
Apple Macintosh PowerPC
Goal
This article will show you how to install and configure your 10g Instant Client (IC) Software for the Mac.
It will install the following packages:
the Basic package
the SQL*Plus package and
the SDK package
and then test its connectivity to an Oracle database using SQL*Plus.
It will also show you how to setup and test a sample program, cdemo81.c, that uses the Oracle Call Interface (OCI)
to connect to the database.
The sample program is located under the <Instant_Client>/sdk/demo directory.
Solution1. Download the following three (3) files from the Oracle Technology Network (OTN) website.
You will need an account to do this.
Macintosh OS X 10g Instant Client Software
a. instantclient-basic-macosx-10.1.0.3.zip (32,395,622 bytes)
b. instantclient-sqlplus-macosx-10.1.0.3.zip (326,740 bytes)
c. instantclient-sdk-macosx-10.1.0.3.zip (293,913 bytes)
NOTE: The above three (3) files will be updated as new patches are released for the 10g Instant Client software. 10.1.0.3 or later versions (10.1.0.x) of these files may be used similarly with this article.
2. Save the following text into a file called tnsnames.ora:
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
3. Save the following text into a file called sqlplus_script.sql:
SELECT user FROM dual;
SELECT sysdate FROM dual;
SELECT 'successful ' AS TEST_RESULTS FROM dual;
exit;
4. Save the following text into a file called setup1:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
# ===========================================
# DESCRIPTION
# ===========
# This script will install and configure your 10g Instant Client (IC) Software
# for the Mac. It will install the Basic, SQL*Plus and SDK (OCI/OCCI) packages
# and then test its connectivity to an Oracle database using SQL*Plus.
# Once this script has completed, you will need to run the script SETUP2 to build
# and run the CDEMO81.C sample application located under the <IC>/sdk/demo folder
# in your newly installed Instant Client home.
# NOTE: In order for this script to run successfully, you MUST perform any
# necessary actions required under the SETUP section below.
# SETUP
# =====
# (1) You MUST be in a directoy with ALL of the following files
# BEFORE running this script:
# 1 - instantclient-basic-macosx-10.1.0.3.zip
# 2 - instantclient-sqlplus-macosx-10.1.0.3.zip
# 3 - instantclient-sdk-macosx-10.1.0.3.zip
# 4 - tnsnames.ora (configured properly)
# 5 - sqlplus_script.sql (connectivity test)
# 6 - setup1 (this file)
# 7 - setup2 (will run this file later)
# (2) Edit the TNSNAMES.ORA file and update it with the necessary information
# to connect to a database on your network. Be sure to note the comments
# in this file. You will have to change the following information:
# SERVICE NAME (orcl or orcl.us.oracle.com)
# HOST (database_machine.us.oracle.com)
# PORT (1521)
# SID (orcl)
# (3) Go to the end of this scrip and modify the following line:
# ./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Replace "orcl" with the SERVICE NAME you used in step (2) above.
# (4) To run this script use the command: ". setup1"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
echo
#more setup1
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# remove the instantclient10_1 directory should it exist
echo
echo CHECKING FOR instantclient10_1 DIRECTORY...
echo WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
echo
rm -d -f -R instantclient10_1
# extract the instantclient software (basic, sql*plus & sdk)
echo
echo
echo INSTALLING SOFTWARE...
echo
echo BASIC
echo
unzip instantclient-basic-macosx-10.1.0.3.zip
echo
echo SQL*PLUS
echo
unzip instantclient-sqlplus-macosx-10.1.0.3.zip
echo
echo SDK
echo
unzip instantclient-sdk-macosx-10.1.0.3.zip
# set the following environment variables
# Uncomment if you want a way to find the Instant Client (IC) home quickly
#export IC=$PWD/instantclient10_1
# Dynamic Library path required to use the Instant Client (IC) software
export DYLD_LIBRARY_PATH=$PWD/instantclient10_1
# TNS_ADMIN is required if using the TNSNAMES.ORA file (recommended)
export TNS_ADMIN=$PWD/instantclient10_1
# display the modified environment variables
echo
echo SETTING ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# display all environment variables
#echo
#echo ALL ENVIRONMENT VARIABLES
#echo
#env
# copy the TNSNAMES.ORA to the instantclient directory
echo
echo COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
echo
cp tnsnames.ora ./instantclient10_1/tnsnames.ora
# list the contents of the IC directory to see what has been installed
echo
echo INSTANT CLIENT [IC] DIRECTORY
echo
ls ./instantclient10_1
echo
# SQL*Plus Connectivity Test
# To connect to the database specified in your TNSNAMES.ORA file change the
# SERVICE NAME (i.e. orcl) below to the name of the entry in your TNSNAMES.ORA
# file designating the specific database in which you want to connect to
echo
echo SQL*PLUS CONNECTIVITY TEST
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Alternately, you can connect from SQL*Plus to Oracle without using a TNSNAMES.ORA
# file. You can embed the NAME-VALUE pair of the SERVICE NAME from the TNSNAMES.ORA
# file directly into the connection string making sure to use the proper HOST, PORT
# and SID like so:
#./instantclient10_1/sqlplus scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=database_machine.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
5. Save the following text into a file called setup2:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
# ===========================================
# DESCRIPTION
# ===========
# This script will build and run the OCI sample application CDEMO81.C inside
# your Instant Client (IC) software located under the <IC>/sdk/demo folder.
# NOTE: In order for this script to run successfully
# (A) you MUST have already run the script SETUP1 successfully
# and
# (B) you MUST perform any necessary actions required under the SETUP
# section below.
# SETUP
# =====
# (1) You need to edit the CDEMO81.C application PRIOR to running this script to
# change the connection information. By default, the application will attempt
# to connect as user SCOTT with password TIGER to a local Oracle database using
# the BEQ-LOCAL network protocol. This will not work.
# (A) You need to make sure you have the SCOTT/TIGER schema created in your database.
# If not, have your DBA create it by running the script "SCOTT.SQL" from your
# <ORACLE_HOME>/rdbms/admin folder.
# (B) You need to modify the CDEMO81.C application to connect to the database
# you have configured inside your TNSNAMES.ORA file.
# (i) Open the CDEMO81.C file located under the <IC>/sdk/demo folder.
# (ii) Find the following line of code:
# (void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
# and change the two empty strings to the SERVICE NAME you are using like so
# (void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
# (iii) Save the file.
# (2) You MUST be in the initial directory where you copied all of the files listed
# in script SETUP1. In this same location you will find SETUP2. Run SETUP2 from
# this location.
# (3) To run this script use the command: ". setup2"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
echo
#more setup2
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# output the username, password and service name from CDEMO81.C file to your shell
echo
echo USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
echo
#more ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*username" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*password" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i OCIServerAttach ./instantclient10_1/sdk/demo/cdemo81.c
# display the required environment variables
#env
echo
echo REPORTING REQUIRED ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# move to the sdk/demo directory
cd ./instantclient10_1/sdk/demo
echo
echo CHANGING TO [IC]/SDK/DEMO DIRECTORY
echo
ls
# run demo application
echo
echo ATTEMPTING TO RUN APPLICATION
echo
echo BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
echo
make -f demo.mk
echo
echo
echo INSTANT CLIENT [IC] DIRECTORY...
echo
ls ../..
echo
echo CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
echo
echo - libclntsh.dylib
echo - libocci.dylib
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
echo
echo INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
echo
ls ../..
echo
echo
echo EXECUTING APPLICATION...
echo
cdemo81
echo
echo
# TROUBLE-SHOOTING
# If you receive the following error messages:
# Error - ORA-24327: need explicit attach before authenticating a user
# Error - ORA-03114: not connected to ORACLE
# Then you did not modify the CDEMO81.C application with proper SERVICE NAME
# information. See step 1B under the SETUP section in this script to resolve
# this error.
6. Take all seven (7) files and move them into the same directory on your OS where you want to install the Instant Client software from:
1 - instantclient-basic-macosx-10.1.0.3.zip
2 - instantclient-sqlplus-macosx-10.1.0.3.zip
3 - instantclient-sdk-macosx-10.1.0.3.zip
4 - tnsnames.ora
5 - sqlplus_script.sql
6 - setup1
7 - setup2
7. Open the file tnsnames.ora. Be sure to review the comments in this file. You will have to change the following information to connect to a database on your network:
SERVICE NAME (orcl or orcl.us.oracle.com)
HOST (database_machine.us.oracle.com)
PORT (1521)
SID (orcl)
Save the file.
8. Open the file setup1, go to the end of this script and modify the following line:
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
Replace orcl with the SERVICE NAME you used in Step 7 above. Save the file.
9. You are now ready to install the 10g Instant Client software for Mac OS X. From the location where your seven (7) files reside, issue the following command:
[macosx]/oracle> . setup1
NOTE: Be sure to include the period "." and a space " " before the word "setup1" so all environment variables persist for the current session.
This will install the Instant Client Basic and SQL*Plus software and connect to the database specified in the tnsnames.ora file.
10. Here is the sample output of a successful execution of the setup1 script:
[macosx]/oracle> . setup1
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
CHECKING FOR instantclient10_1 DIRECTORY...
WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
INSTALLING SOFTWARE...
BASIC
Archive: instantclient-basic-macosx-10.1.0.3.zip
inflating: instantclient10_1/classes12.jar
inflating: instantclient10_1/libclntsh.dylib.10.1
inflating: instantclient10_1/libnnz10.dylib
inflating: instantclient10_1/libocci.dylib.10.1
inflating: instantclient10_1/libociei.dylib
inflating: instantclient10_1/libocijdbc10.dylib
inflating: instantclient10_1/ojdbc14.jar
SQL*PLUS
Archive: instantclient-sqlplus-macosx-10.1.0.3.zip
inflating: instantclient10_1/README_IC.htm
inflating: instantclient10_1/glogin.sql
inflating: instantclient10_1/libsqlplus.dylib
inflating: instantclient10_1/sqlplus
SDK
Archive: instantclient-sdk-macosx-10.1.0.3.zip
creating: instantclient10_1/sdk/
creating: instantclient10_1/sdk/demo/
inflating: instantclient10_1/sdk/demo/cdemo81.c
inflating: instantclient10_1/sdk/demo/demo.mk
inflating: instantclient10_1/sdk/demo/occidemo.sql
inflating: instantclient10_1/sdk/demo/occidemod.sql
inflating: instantclient10_1/sdk/demo/occidml.cpp
creating: instantclient10_1/sdk/include/
inflating: instantclient10_1/sdk/include/nzerror.h
inflating: instantclient10_1/sdk/include/nzt.h
inflating: instantclient10_1/sdk/include/occi.h
inflating: instantclient10_1/sdk/include/occiAQ.h
inflating: instantclient10_1/sdk/include/occiCommon.h
inflating: instantclient10_1/sdk/include/occiControl.h
inflating: instantclient10_1/sdk/include/occiData.h
inflating: instantclient10_1/sdk/include/occiObjects.h
inflating: instantclient10_1/sdk/include/oci.h
inflating: instantclient10_1/sdk/include/oci1.h
inflating: instantclient10_1/sdk/include/oci8dp.h
inflating: instantclient10_1/sdk/include/ociap.h
inflating: instantclient10_1/sdk/include/ociapr.h
inflating: instantclient10_1/sdk/include/ocidef.h
inflating: instantclient10_1/sdk/include/ocidem.h
inflating: instantclient10_1/sdk/include/ocidfn.h
inflating: instantclient10_1/sdk/include/ociextp.h
inflating: instantclient10_1/sdk/include/ocikpr.h
inflating: instantclient10_1/sdk/include/ocixmldb.h
inflating: instantclient10_1/sdk/include/odci.h
inflating: instantclient10_1/sdk/include/oratypes.h
inflating: instantclient10_1/sdk/include/ori.h
inflating: instantclient10_1/sdk/include/orid.h
inflating: instantclient10_1/sdk/include/orl.h
inflating: instantclient10_1/sdk/include/oro.h
inflating: instantclient10_1/sdk/include/ort.h
inflating: instantclient10_1/sdk/include/xa.h
SETTING ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
INSTANT CLIENT [IC] DIRECTORY
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
SQL*PLUS CONNECTIVITY TEST
SQL*Plus: Release 10.1.0.3.0 - Production on Fri Aug 19 15:26:08 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
USER
SCOTT
SYSDATE
19-AUG-05
TEST_RESULTS
successful
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
IF THE SQL*PLUS CONNECTIVITY TEST WAS SUCCESSFUL
READ SETUP2 TO CONFIGURE AND RUN THE OCI cdemo81.c SAMPLE
[macosx]/oracle>
11. Once you have obtained a successful execution of the setup1 script, you are ready to configure cdemo81.c to connect to the database you have configured inside your tnsnames.ora file.
Open the cdemo81.c file located under the <Instant_Client>/sdk/demo folder. Find the following line of code:
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
Change the two (2) empty strings to the SERVICE NAME you used in Step 7 above.
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
Save the file.
12. You are now ready to run cdemo81.c. You MUST issue the following command from the initial directory where you copied all of the files in Step 6:
[macosx]/oracle> . setup2
NOTE: Be sure to include the period "." and a space " " before the word "setup2" so all environment variables persist for the current session.
This script will configure your environment, build and run the OCI sample code connecting to the database specified in the tnsnames.ora file.
13. Here is the sample output of a successful execution of the setup2 script:
[macosx]/oracle> . setup2
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
static text username = (text ) "SCOTT";
static text password = (text ) "TIGER";
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
REPORTING REQUIRED ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
CHANGING TO [IC]/SDK/DEMO DIRECTORY
cdemo81.c* demo.mk occidemo.sql occidemod.sql occidml.cpp
ATTEMPTING TO RUN APPLICATION
BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
rm -rf SunWS_cache
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
rm -rf cdemo81 cdemo81.o occidml occidml.o
/usr/bin/gcc -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI cdemo81.c
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o cdemo81 cdemo81.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
/usr/bin/g++ -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI occidml.cpp
In file included from ../include/occi.h:43,
from occidml.cpp:11:
../include/occiData.h:411: warning: use of `long double' type; its size may
change in a future release
../include/occiData.h:411: warning: (Long double usage is reported only once
for each file.
../include/occiData.h:411: warning: To disable this warning, use
-Wno-long-double.)
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o occidml occidml.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
INSTANT CLIENT [IC] DIRECTORY...
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
- libclntsh.dylib
- libocci.dylib
INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
README_IC.htm libnnz10.dylib libsqlplus.dylib*
classes12.jar libocci.dylib ojdbc14.jar
glogin.sql libocci.dylib.10.1 sdk/
libclntsh.dylib* libociei.dylib* sqlplus*
libclntsh.dylib.10.1* libocijdbc10.dylib* tnsnames.ora
EXECUTING APPLICATION...
Enter employee name (or CR to EXIT): LARRY
Enter employee job: CEO
Enter employee salary: 10000
Enter employee dept: 40
LARRY added to the OPERATIONS department as employee number 7974
Enter employee name (or CR to EXIT):
Exiting...
[macosx]/oracle/instantclient10_1/sdk/demo>
14. If you have any problems running this script please open a Service Request (SR) with Oracle Support for further assistance and be sure to upload the output from the script to the SR.
ReferencesNote
332588.1 - How to Install, Configure and Test Oracle 10g Instant Client Basic, SQL*Plus and SDK Packages for Mac OS X (Runs OCCI sample code - occidml.cpp)
Errors
ORA-3114 "not connected to ORACLE"
ORA-24327 need explicit attach before authenticating a user
ORA-12154 "TNS:could not resolve service name" -
How to connect oracle database using jsf
how to connect oracle database using javaserver faces with connection pooling
Here is one way...
http://jakarta.apache.org/commons/dbcp/ -
Connect to oracle database using c program
I am using AIX environment and i want to connect to oracle database using c program.
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10825/pc_03dbc.htm#i5880
-
Not able to connect to database using Oracle ODBC Driver
Hi,
I have installed Oracle client on a system. there are 2 homes installed. When I check the ODBC administrator, I see that only one ODBC driver is present. There are Net 8 services configured in both the homes.
When I try to connect to a database with the services configured in the second home using the ODBC driver, I am getting an error that the TNS name could not be resolved.
How can I use the ODBC driver to connect to the databases using services defined in the second home?
The name of the ODBC driver is 'Oracle in <firsthomename>
Thanks & RegardsHi,
Thanks for the help.
I tried this, but it doesn't work. I'm still getting the error.
Now I am not able to create a DSN when I set the ORACLE_PATH to the second home. It says 'the setup routines for the Oracle in ora1 ODBC Driver could not be loaded due to system error code 998.'
Any other solution?
Thanks in advance & Regards
Anuja -
How does one connect to an Oracle Database using OO4O as sysdba using VB 6?
Hi,
Can any one give suggestion to connect an Oracle Database using OO4O as sysdba using VB 6.0. Generally it supports only database, userid/password only.
For Eg:
Option Explicit
Dim m_oraSession As Object
Dim m_oraDatabase As Object
Private Sub Command1_Click()
Set m_oraSession = CreateObject("OracleInProcServer.XOraSession")
Set m_oraDatabase = m_oraSession.DBOpenDatabase("Database", "user/password", 0&)
MsgBox "Connected to " & m_oraDatabase.Connect & "@" & m_oraDatabase.DatabaseName
End Sub
Private Sub Form_Unload(Cancel As Integer)
Set m_oraDatabase = Nothing
Set m_oraSession = Nothing
End Sub
Thanks & Regards,
Kishore.P
E-Mail: [email protected]You can't connect AS SYSDBA with OO4O.
-
Unable to establish connection to oracle database using sql developer
hi guys,
i tried to connect to the oracle database using the sql developer, but it fails. it replies the following message:
Status: Failure -Test failed: Io exception: The Network Adapter could not establish the connection
what should i do? any helpPlease provide a little more information:
1) SQLDeveloper version.
2) Database Version.
3) Database location (same machine or on the network).
4) Connection method (basic,TNS).
5) Connection type (Thin,Thick/OCI).
Usually the first thing to check is if you have correctly entered the right information for your database connection, then if everything seems to be OK the database itself should be checked for potential problems. -
How To Store pdf or doc file in Oracle Database using Java Jdbc?
can any one help me out How To Store pdf or doc file in Oracle Database using Java Jdbc in JSP/Serlet? i tried like anything. using blob also i tried. but i am able 2 store images in DB not files. please if u know or else if u have some code like this plz send that to me, and help me out plz. i need that urgent.
Hi.. i am not getting error, But i am not getting the original contents from my file. i am getting all ASCII vales, instead of my original data. here i am including my code.
for Adding PDF in DB i used image.jsp
Database table structure (table name. pictures )
Name Null? Type
ID NOT NULL NUMBER(11)
IMAGE BLOB
<%@ page language="java" import="java.util.*,java.sql.*,java.io.*" pageEncoding="ISO-8859-1"%>
<%
String path = request.getContextPath();
String basePath = request.getScheme()+"://"+request.getServerName()+":"+request.getServerPort()+path+"/";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection con=DriverManager.getConnection("jdbc:oracle:thin:@192.168.1.135:1521:orcl","scott","tiger");
PreparedStatement ps,pstmt,psmnt;
ps = con.prepareStatement("INSERT INTO pictures VALUES(?,?)");
File file =
new File("D:/info.pdf");
FileInputStream fs = new FileInputStream(file);
ps.setInt(1,4);
ps.setBinaryStream(2,fs,fs.available());
int i = ps.executeUpdate();
if(i!=0){
out.println("<h2>PDF inserted successfully");
else{
out.println("<h2>Problem in image insertion");
catch(Exception e){
out.println("<h2>Failed Due To "+e);
%>
O/P: PDF inserted successfully
i tried to display that pdf using servlet. i am giving the code below.
import java.io.IOException;
import java.sql.*;
import java.io.*;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class DispPDF extends HttpServlet {
* The doGet method of the servlet. <br>
* This method is called when a form has its tag value method equals to get.
* @param request the request send by the client to the server
* @param response the response send by the server to the client
* @throws ServletException if an error occurred
* @throws IOException if an error occurred
public void service(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
//response.setContentType("text/html"); i commented. coz we cant use response two times.
//PrintWriter out = response.getWriter();
try{
InputStream sPdf;
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection con=DriverManager.getConnection("jdbc:oracle:thin:@192.168.1.135:1521:orcl","scott","tiger");
PreparedStatement ps,pstmt,psmnt;
psmnt = con.prepareStatement("SELECT image FROM pictures WHERE id = ?");
psmnt.setString(1, "4"); // here integer number '4' is image id from the table.
ResultSet rs = psmnt.executeQuery();
if(rs.next()) {
byte[] bytearray = new byte[1048576];
//out.println(bytearray);
int size=0;
sPdf = rs.getBinaryStream(1);
response.reset();
response.setContentType("application/pdf");
while((size=sPdf.read(bytearray))!= -1 ){
//out.println(size);
response.getOutputStream().write(bytearray,0,size);
catch(Exception e){
System.out.println("Failed Due To "+e);
//out.println("<h2>Failed Due To "+e);
//out.close();
OP
PDF-1.4 %âãÏÓ 2 0 obj <>stream x+är á26S°00SIá2PÐ5´1ôÝ BÒ¸4Ü2KüsSSS4C²ê Pkø$VãGÒU×713CkW )(Ü endstream endobj 4 0 obj <>>>/MediaBox[0 0 595 842]>> endobj 1 0 obj <> endobj 3 0 obj <> endobj 5 0 obj <> endobj 6 0 obj <> endobj xref 0 7 0000000000 65535 f 0000000325 00000 n 0000000015 00000 n 0000000413 00000 n 0000000168 00000 n 0000000464 00000 n 0000000509 00000 n trailer <<01b2fa8b70ac262bfa939cc786f8770c>]/Root 5 0 R/Size 7/Info 6 0 R>> startxref 641 %%EOF
plz help me out.
Maybe you are looking for
-
PCD Index Error in Trex Search
Dear all I have tried to configure as mentioned in the URL <b>Configuring the Search for Portal Pages and iViews</b> http://help.sap.com/saphelp_nw04/helpdata/en/b2/d59a4271c80a31e10000000a1550b0/frameset.htm . I am getting the following error. <i><b
-
G5 shutting down rather than sleeping
Hi, In the past few days my iMac G5 (approx. three years old) has been shutting itself down rather than going into sleep mode. I know it is not an issue of sleeping and not reviving because the power pulse light is not on. No problems in normal opera
-
Problem updating Infotype 1208 subtype ALUM
Hi, My requirement is to update the infotype 1208 subtype ALUM with the Value "YES" when I terminate a employee in PA40. ( immediately). I am using the FM - HR_INFOTYPE_OPERATION which doesn't seem to work. I tried running a BDC for PA30 , but it i
-
Is it possible to change the color of a pieseries data row depending on a value? For example if the value is greater than 90 the color should be always red. If it is less than 90 and greater than 70, the color is yellow.. Something like this. Thanks.
-
Supported Image formats in af:image?
Could anyone pls. list which Image formats - the af:image component supports? I can't find it listed anywhere, Thanx in advance, Henrik