Cant create type geometry

Hi..
I am using the oracle version 11.1.0.6.0
I have created a type user defined geometry( create or replace type geometry of geometry1) in the schema named "schema1"
I tried creating the same in a new schema schema2.. It throws an error geometry is already exisitng. The reason is, there is an existing object in mdsys schema (spatial schema).
My question is why it allowed me to use the name geometry in schema1 and not in schema2. If the mdsys schema is not visible in schema1, how can i make invisible to schema2 also..
Thanks in advance..

arizona9952 wrote:
Hello,
Do you know what the mdsys.geometry object does or why it is there? Would it be ok to remove this object? Did you try to remove the schema1 geometry object, then create the schema2 geometry object as a sanity check? I don't understand why schema1 would find it invisible while schema2 wouldn't.privileges

Similar Messages

Cant create hierarchy FILE load for 0GL_ACCOUNT

Hi guys i have a special Question......we are trying to create a file load hierarchy source for 0GL_ACCOUNT, in BC i cant find any FILE type infosource or datasource.....in source systems FILE i cant create a datasource for hierarchy and in the hierarchy infosource appears a message that the infosource is already mapped to DEVFILE because theres an infosource FILE type for load master data...
I cant create a file load hierarchy infoosurce for 0GL_ACCOUNT
Regards

Are you using the flexible or direct update? This will only work with Direct Update since you can only load a data target/infoprovider using the flexible update and a hierarchy is never an infoprovider.
For example, if you make your characteristic and infoprovider. The Attrib and Text infoproviders show up under the infoprovider tab. However, the Hierarchies don't.
So, here is a step-by-step solution you can follow ...
1.) Under Infosources tab, find your characteristic. You need to find the infosource for direct update. It will have the three icons ... one for attributes, texts and hierarchies. If you don't see the green hierarchy icon, then you need to turn hierarchies on for the characteristic.
2.) Right click on the infosource and choose, "Assign Datasource".
3.) Under Source System, choose your flat file source system, it is probably named FLATFILE, FILE, TEXT, etc....
4.) Enter your transport info and select yes to the infosource/datasource assignments for attributes, texts and hierarchies (assuming you have all three icons)
5.) Select the drop down for datasource and choose your hierarchy datasource.
6.) Activate the datasource or switch the transfer method to IDOC (instead of PSA) and save the infosource (no activation under IDOCs).
7.) You can now create your info package against the hierarchy datasource.
If you are having trouble getting to this stage, the next is going to be more difficult -or- perhaps you are already at this and are having trouble loading the hierarchy?
Whatever the case, please tell us the steps you have gone through and the errors or error messages you are receiving. Sometimes these issues are very complicated to both explain and to understand.
Brian

I am trying to install software and am getting the following prompt.Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT. How do I repair this

I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair this

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Palm Profile cannot sign in and cant create new palm profile!

Hello,
I am looking for help with my company Pre 2 EU Unlock Phone.
I am an HP Employee and i got my Pre 2 months ago, then i dont have any issue to create my palm profile - [email protected]
Few days ago I wipe my phone coz it was very slow and when i try to sign in i get an error - Sign In Failed.
Of course i check the site and everything looks fine. I delete the device under my profile coz i thought that cause any issue. And try to log on again - unsuccessfully
Then i try to create new profile and again nothing happen
I go to live chat and i have 3hours chat with support - again no success(Chat session ID:99825861). We try everything possible but its not working..
Ofcourse web chat rep try to explain me that the root cause is in my carrier which is not true because my card have 3G and its working perfectly.
Because when i type wrong password it said me password is wrong and i click on forgot password i select the secret question and change the password via the phone - which is a clear proof that Internet 3G is working!
Then i decide to downgrade to 2.0 - again cant login and cant create new profile, try with 2.01 again no success.
Now back on 2.1 with #*DEVMODE# everything is working i have signal and i can use the phone but i dont have app catalog and cant install apps because there is no Palm profile on the phone.
I try SDK tool and to find what is the app which start profile creation card with palm-launch but without success.
So i have few Question
- Do we(you) have a problem with WebOSProfile Services ?
- why i cant create new or login to my existent profile ?
- in DEVMODE how i can create palm profile (is that possible) and if it is how to do it ?
- what is the HP internal group which support this services and how i can contact you internaly ?
Looking for your reply because thats and urgent and i cant use my phone more than 3 days
Post relates to: Pre 2 p102ueu (Unlocked EU)
Post relates to: Pre 2 p102ueu (Unlocked EU)

Djumanta wrote:
Dear Friends
Please Help me !!
I try to upgrade my palm pre + and after that i cannot login to my palm profile
i have tried so many time and it keep rejected all the time
Please give me solution coz i cannot use my phone, i cannot make a call or anything before finish the palm profile login
i will appriciated your help
Post relates to: Pixi Plus p121vzw (Verizon)
What do you mean by "upgrade?" If you've installed some software version that isn't supported for your device, then you may have to use the WebOS Doctor to go back to a supported version.
If you've "upgraded" to a supported version, then this problem will require you call Palm/HP's support to find out why you can't sign into your profile.
HTH

Runtime error 429, activeX component cant create object while using netbet pro on windows 7 & 8.1 HELP!!!

runtime error 429, activeX component cant create object while using netbet pro
does anyone know what I could do to fix this problem??? netbet pro was't available for a while then it's back but has yet to run

What's netbet pro?
I'd recommend asking questions about third party applications in the vendor's forum, not a Microsoft forum meant for admin scripting.
EDIT: Ah, some gambling website...
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

I cant create account because i dont have credit card but I have ipod touch and I need it to download free games and other stuff

I cant create account because i dont have credit card but I have ipod touch and I need it to download free games and other stuff.Is there any option i can write i dont have any credit card?
Sorry abaot my english

Hi...
Click None in the Payment Information window.
Instructions for either using your iPhone or a computer > Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Create type not working

I'm following the 8.1.6 documentation to create type, but it always returns me the error.
My references are from :
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/appdev.817/a76976/adobjmng.htm
The script is:
CREATE TYPE location (
building_no NUMBER,
city VARCHAR2(40) );
The error is:
1/15 PLS-00103: Encountered the symbol "(" when expecting one of the following:
; is authid as compress compiled wrapped
4/0 PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
pragma
May I know that how can I work around it?
I had tried earlier another syntex successfully:
create type typeName as object(definition....).
May I also know what's the difference between these 2 commands?
Thanks in advance
Minny

I think there's a mistake in the documentation. I may be wrong but I think it should always be CREATE TYPE x AS OBJECT (...)

Creating Types and Internal table

Hi,
I created
Types: begin of itab,
           field 1 ...
            Field 30,
        End of itab.
Data: lt_itab type table of itab.
I need to create a second type itab1 with all the itab fields and also new fields field31 and field32.
I dont want to declare all the 30 fields again for the second one.
Can any one tell me how to create this?
Thanks.
rajesh

You can INCLUDE TYPE.
Types: begin of itab,
       field1 type string,
       field2 type string,
*      More Fields in here.
       Field30 type string,
       End of itab.
Data: lt_itab type table of itab.
TYPES BEGIN OF new_itab.
       INCLUDE type itab.
TYPES: field31 type string,
       field32 type string,
END OF new_itab.
Regards,
Rich Heilman

I cant create a book in iPhoto 5.0.4

Hi all
I cant create a book in iPhoto 5.0.4 - both the add new book button and the new book command in the menu are greyed out!
I have rebooted, checked permissions, etc, etc...all the usual.
Any thoughts?
Thanks
Rob

Hi robsterc,
You must select an album or a group of images first, then go to File>new book
Lori

Create TYPE

I am not able to create type objects tried with different versions of oracle too.
Currently I am using Oracle 11g Enterprise edition (2.9GB).
The problem is when i create a TYPE object and when i terminate the command with a semicolon ';',oracle sql does not stop only (the query does not execute) the loop goes on and on.
I did like this and found that the SYNTAX is also perfect.
SQL> CREATE TYPE address_type AS OBJECT
2 (street varchar2(30),
3 city varchar2(30),
4 pincode number(10));
5
6
7
8...
It goes on and on it never ends. Command never executes.
Please Help!

end the command with "/" :
create type .....
/

CREATE TYPE address_type AS OBJECT - ERROR

I am not able to create type objects tried with different versions of oracle too.
Currently I am using Oracle 11g enterprise edition (2.9GB).
The problem is when i create a TYPE object and when i terminate the command with a semicolon ';',oracle sql does not stop only (the query does not execute) the loop goes on and on.
I did like this and found that the SYNTAX is also perfect.
SQL> CREATE TYPE address_type AS OBJECT
2 (street varchar2(30),
3 city varchar2(30),
4 pincode number(10));
5
6
7
8...
It goes on and on it never ends. Command never executes.
Please Help!

A type body will contain PL/SQL semicolons, so once SQL*Plus sees that you're entering a type it stops treating semicolons as the SQL*Plus multi-line statement terminator character. (A type header will not contain semicolons, but I expect Oracle decided it would be even more confusing if CREATE TYPE BODY behaved differently to CREATE TYPE.)
Note you can also terminate entry by entering a dot (period) on a line on its own.
I guess in older version there was nothing like that.Actually this has been around for over 10 years ;)

Create Type as Object not working in linux oracle 11g

Pleae refer to the following simple create type as object statement.
CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER)
It is working in oracle 11g and windows server 2008 environment.
But it is not working in oracle 11g with linux environment.
I am executing this statement as dynamic sql as follows
CREATE OR REPLACE PROCEDURE TEMP_SP
AS
BEGIN
DECLARE vcType VARCHAR2(30);
BEGIN
SELECT OBJECT_TYPE into vcType FROM USER_OBJECTS
WHERE OBJECT_NAME='EC_VIEWABLETYPES' AND OBJECT_TYPE='TYPE';
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXECUTE IMMEDIATE 'CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER) ';
COMMIT;
RETURN;
END;
END;
exec TEMP_SP
please let me know what i am missing ?

And error is:ORA-00600: internal error code, arguments: [kothc_uc_md5:lxerr], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "ATIPAGENT.TEMP_SP", line 10
ORA-01403: no data found
ORA-06512: at line 1
..Query:exec TEMP_SP...Previous Query:CREATE OR REPLACE PROCEDURE TEMP_SP AS BEGIN DECLARE vcType VARCHAR2(30); BEGIN
SELECT OBJECT_TYPE into vcType FROM USER_OBJECTS
WHERE OBJECT_NAME='EC_VIEWABLETYPES' AND OBJECT_TYPE='TYPE'; EXCEPTION WHEN NO_DATA_FOUND THEN
EXECUTE IMMEDIATE 'CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER) ';
COMMIT;
RETURN;
END;
END;

Cant create connection Pool for MS SQL Server 2000 with Microsoft Driver

i am using bea weblogic server 6.1, i cant create connection pool while using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft website. when
i give the following class name for JDBC driver and the connection url and click
apply while selecting the available server, a number of exception appears in default
server (that is the connection pool cannot be created..... cannot load the driver
class).
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple application in Jbuilder
7.0 the application runs successfully and fetches the data deom MS SQL database
but in at Bea connection Pool is not created with these settings. i do give appropriate
username and password in properties field in connection pool. Thankx for any help!

khabbab wrote:
That was the original code part from "startweblogic" :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
echo off
and i changed it to :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;D:\Program Files\Microsoft
SQL Server 2000 Driver for JDBC\lib\msbase.jar;D:\Program Files\Microsoft SQL
Server 2000 Driver for JDBC\lib\msutil.jar;D:\Program Files\Microsoft SQL Server
2000 Driver for JDBC\lib\mssqlserver.jar;I suggest moving or copying the three ms driver jars to a directory that has no blanks
in it so the classpath doesn't have blanks in it. Ie:
go to the "D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib"
directory and do this:
mkdir D:\microsoft_jdbc_driver
cp *.jar D:\microsoft_jdbc_driver
Then make the classpath include D:\microsoft_jdbc_driver\msbase.jar etc.
Joe
>
>
echo off
when i save and run the bat file, server appears then disappears.
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???Show me what change you made to the startweblogic file.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!

Error On Creating Type

SQL> create or replace type WS_REQUEST as object
2 (
3    xml xmltype,
4    http_request utl_http.req
5   )
6 /
Warning: Type created with compilation errors
SQL> show err;
Errors for TYPE SYS.WS_REQUEST:
LINE/COL ERROR
4/16     PLS-00201: identifier 'UTL_HTTP.REQ' must be declared
0/0      PL/SQL: Compilation unit analysis terminated
SQLI logged in sys schema as sysdba. What is the problem?

I think you cannot create types if the attributes' datatypes are based on package records, constants, etc
See:
mmara@pyn> create or replace package val
is
type dummy is record (
pid number,
pname varchar2(15));
end val;
Package created.
mmara@pyn> create or replace type WS_REQUEST as object
xml xmltype,
http_request val.dummy
Warning: Type created with compilation errors.
mmara@pyn> show errors type ws_request;
Errors for TYPE WS_REQUEST:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
4/18 PLS-00201: identifier 'VAL.DUMMY' must be declared
mmara@pyn>
In that case, why don't you create the same type as seen in utl_http as an object in the schema?:
TYPE req IS RECORD (
url VARCHAR2(32767 byte), -- Requested URL
method VARCHAR2(64), -- Requested method
http_version VARCHAR2(64), -- Requested HTTP version
private_hndl PLS_INTEGER -- For internal use only
);

No Access to SLD so cant create my own scenario

Hi All,
I dont have the access to SLD so cant create my own business system.
Can anyone guide me how to check what all the business system and component available available.
I also want to create a simple RFC to SOAP scenario.Do we have any standard RFC which I can use and create my scenario.
Not Spcific just a general RFC I want to use to built a scenario.
Thanks,
Babu

HI Sudheer
If you dont have access to create a new B system , then you will have to use existing Bsystem.
I think you should be knowing which system the RFC belongs to , or if its a Proof of concept that you are trying to do , you can use any existing Bsystem that you can find in ID under communication Component.If you dont have any B system, you will have to check with Admin to get one created for you.
Below blogs should help
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
Regards
Srinivas

Cant create type geometry

Similar Messages

Maybe you are looking for