Cant display my abap webdynpro

Dear all;
    I installed the portal and then set up a system to be able to work with webdynpro applications. The system configuration is the following:
WebAs hostname: XXXX:3600
WebAs path: /webdynpro/dispatcher
Protocol: http
I did a "SAP Web AS Connection" connection test and it worket:
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (fede:3600)
5. The host name fede was resolved successfully.
6. The Web AS ping service http://fede:3600/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://fede:3600/webdynpro/dispatcher was obtained successfully.
In this system I also set up a ITs connection.
After that, I went to System administration / System configuration / support, and test this System with a Transaction and it worded perfect, but when testing with a webdynpro it sends me to a "web page cant be displayed...blah blah server not found or DNS error"
I too tried to create an Iview with the web dynpro, with the same result
I spent all the weekend trying to figure out what could be wrong... Any help with this will be really very appreciated!!!!
Best regards,
Fede

Thank you guys!!
The port is 8000, I have already modified it.
2 questions
1) What is the path for ABAP webdypro apps, /sap/bc/webdynpro/sap or the one I used? Because I went to trx SICF and tested a webdynpro and it opened in a browser with the path http://fede:8000/sap/bc/webdynpro/...  (Note: I had to modify a SAP estándar code in order to avoid a excepetion for not having a fully qualified domain).
2) I have created an abap webdrypro to test the portal, but it doesnt appear in the path /sap/bc/webdynpro/sap, shouldnt it appear there in order to be accesible from outside?
Thank you very very much!
Federico.

Similar Messages

  • Header information not displaying in ABAP Webdynpro record working time

    1. I am not seeing the header information, personnel number, name, cost center, on the ABAP Webdynpro record working time timesheet. When I run the timesheet profile in CAT2 the header contains the personnel number, name, cost center, but these do not display when the ABAP Webdynpro timesheet is run
    2. Is there a version of the ABAP webdynpro timesheet that prompts for the personnel number, date and profile prior to executing the timesheet?  I want to define an ESS link for managers to update timesheets of individual teammates.  The teammate do not necessarily have to be their direct reports

    Hi David,
    CATS Webdynpro application is a OIF fpm. Please check if you have performed the FPM IDR configuration properly.
    In standard, the ESS CATS does not prompt for the personnel number except in CE scenario. In MSS addon, you have an option to launch the ESS CATS application on-behalf of the employee. Please refer to the sap library documentation.
    Hope this helps,
    Regards,
    Roy

  • Image UI element is  not displayed in Abap webdynpro application

    Hi Experts,
    I need your advice on below issue.
    I have created new ABAP Webdynpro application just to
    display employee photo.
    When loading the application, I generated a dynamic URL for
    a image in webdynpro application path in cache to map to Image UI Element. It
    is working well in DEV and QA environment. But it is not displaying when loaded
    in PRD system.
    Please suggest where to check the cache properties in system
    in order to resolve this issue.
    The user can access the application path, is there any chance for security issue in the same path?
    I suspect the URL is cleared before user access it, can it be controlled via any config?
    Looking forward for your valuable inputs.
    Thanks,
    Swetha

    HI Swetha,
    Maybe the image is not present in MIME repository for the PRD system.
    Please check.
    Regards,
    Hancila

  • Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

    Hi,
    We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro. 
    Examples of these tasks are:
    TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
    TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
    We have two backend systems configured
    SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
    SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
    In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
    In the UWL configuration the system SAP_ECC_Workflow has been registered
    In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
    The system SAP_ECC_Workflow has been re-registered
    The UWL cache has been cleared
    However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
    The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
    If we try the reverse (i.e  register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow)  then the reverse happens.  The java tasks can be launched and the ABAP tasks cannot.
    Does anyone have a solution to this problem.  Surely other people have implemented both ABAP and Java webdynpro workflows?
    Any help much appreciated
    Andrew

    Thanks  a lot for all your replies..
    The workitem type registration has been done already, but still it doesn't work..
    But here is the actual problem...
    There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
    In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
    The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
    Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
    Please can anybody suggest.
    Best Regards,
    Sushmitha

  • Data is not displaying using ABAP WebDynPro

    Hi,
    Thanks in Advance.
    I am trying to get the data of field AUFNR and KTEXT from AUFK table into Layout.
    These are the attributes of Change Node
    Node Name            PROD_ORDER
    Interface Node                   : No
    Input Element (Ext.)           : No
    Dictionary structure AUFK
    Cardinality                    :      0..n
    Selection                     :       0..1
    Init. Lead Selection       :   Yes
    Singleton                     : No
    Supply Function
    Mapping Path
    Method :
    I have written the following code to fetch the data from AUFK table
    method WDDOINIT .
    Data: it_AUFK type standard table of AUFK,
          context_node type ref to if_wd_context_node.
    select AUFNR KTEXT from AUFK INTO table it_AUFK.
      if sy-subrc eq 0.
        context_node = wd_context->get_child_node( name = 'PROD_ORDER').
        context_node->bind_table( it_AUFK ).
      endif.
    endmethod.
    There is no syntax error and getting activated. But while testing no data or even column is displaying into browser. It is blank page.
    Am not sure where I am wrong. Please assist me.
    Thanks

    Hi ,
    Check this for testing purpose :
    Afer you have binded the internal table to the node , check if node has some vlaues in it or not :
    Use this code to get the data of node into an internal table and see if the node is getting populating with data  or not :
    DATA lo_nd_cn_table TYPE REF TO if_wd_context_node.
        DATA lo_el_cn_table TYPE REF TO if_wd_context_element.
        DATA ls_cn_table TYPE wd_this->element_cn_table.
    DATA it_table  TYPE wd_this->elements_cn_table.
    *   navigate from <CONTEXT> to <CN_TABLE> via lead selection
        lo_nd_cn_table = wd_context->get_child_node( name = wd_this->wdctx_cn_table ).
    *lo_nd_cn_table->get_static_attributes_table( IMPORTING table = lt_table).*
    <CN_table is my node binded to table.>

  • How to create a view to display Multiple lines of Text using ABAP WebDynpro

    Hi,
    I need to create a static view page in ABAP WebDynpro that displays Static text data in multiple paragraphs. I tried to use textview, formatted text, text edit controls by binding the textcontrol to a text object that is created in so10, but the output I am getting is only one line and the character count is limited to 60 to 65 characters.
    I would like to know which control needs to be used in ABAP Webdynpro to get multiple lines displayed with text formatting like Paragraph, Indenting and Size.....
    Thanks for your time!
    Madhavi.

    Find the sample codes:
      data sapscript_lines     type tlinetab.
      data sapscript_lines1     type tlinetab.
      data sapscript_tline     type tline.
      data sapscript_head      type thead.
      data text                type string.
      data formatted_text type ref to cl_wd_formatted_text.
      call function 'DOCU_GET'
        EXPORTING
          id                = 'TX'
          langu             = 'D' "Germany language
          object            = 'WDR_TEST_HELP_EXP1'
        IMPORTING
          head              = sapscript_head
        TABLES
          line              = sapscript_lines
        EXCEPTIONS
          no_docu_on_screen = 1
          no_docu_self_def  = 2
          no_docu_temp      = 3
          ret_code          = 4
          others            = 5.
      if sy-subrc <> 0.
        text = space.
      endif.
      formatted_text = cl_wd_formatted_text=>create_from_sapscript(
        sapscript_head  = sapscript_head
        sapscript_lines = sapscript_lines
      " set it into the context
      if Not ( formatted_text is initial ).
        wd_context->set_attribute(
        name  = 'FORMATTED'
        value = formatted_text->m_xml_text ).
      endif.
    clear sapscript_head.
    clear sapscript_lines.
    *Get the text created by SO10
    CALL FUNCTION 'READ_TEXT_INLINE'
      EXPORTING
        ID                    = 'ST'
        INLINE_COUNT          = 1
        LANGUAGE              = 'E' "English language
        NAME                  = '85XX_FOOTER'
        OBJECT                = 'TEXT'
      LOCAL_CAT             = ' '
    IMPORTING
       HEADER                = sapscript_head
      TABLES
        INLINES               = sapscript_lines1
        LINES                 = sapscript_lines
    EXCEPTIONS
      ID                    = 1
      LANGUAGE              = 2
      NAME                  = 3
      NOT_FOUND             = 4
      OBJECT                = 5
      REFERENCE_CHECK       = 6
      OTHERS                = 7
      formatted_text = cl_wd_formatted_text=>create_from_sapscript(
        sapscript_head  = sapscript_head
        sapscript_lines = sapscript_lines
      " set it into the context
      if Not ( formatted_text is initial ).
        wd_context->set_attribute(
        name  = 'FORMATTED1'
        value = formatted_text->m_xml_text ).
      endif.

  • Abap webdynpro layout and application not displayed

    Hi Gurus ,
        We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
        Following are the list of error in EHP4 system ,
                    1)  Layout of ABAP Webdynpro Component are not displayed .
                    2)  Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
        error are as follows while trying to view layout in abap webdynpro application :
        http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
          If any one have information for this kindly let me know .
    Thanks :
    Vishwas
    Edited by: vishwassap on Aug 12, 2010 7:17 AM

    Hi,
       Thanks for reply ,
       Above mention is not link ,its an error in pop up inside layout of view .
      I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
      But still application is not displayed it shows error like
      1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
      2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
      3) while navigating from one view to any view or window is not possible , it gives error
      4) When I navigate from one view to other .
      The following error text was processed in the system D36 : The ASSERT condition was violated.
    The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
    Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    Edited by: vishwassap on Aug 13, 2010 8:31 AM

  • How to display HTML files using ABAP Webdynpro?

    Hi,
    I have a html index file and a bunch of other files accessed by the index file  in a specific directory on the SAP server. I'd like to display the index file via ABAP webdynpro and allow the users to click on what they need to see. How can I achieve this using utilizing the ABAP webdynpro technology ?
    Thanks!

    Hi Thomas,
    Thanks for taking the time to answer my question.
    I have the main html file and all other files needed by the main file in one directory on the application layer of SAP. I'd like to provide the user with a link, by clicking on which they should be able to get to the main html file using the browser. This is just a standalone application.
    I can try the approach using BSPs, however, I'm new to that area. Could you point me in the right direction to get started?

  • Display Word Document in ABAP WebDynpro

    Hi All,
    We have a number of word documents stored in the Business Document Navigator (Transaction OAOR) that we would like to display within a simple ABAP WebDynpro.  Demo program SAPRDEMO_FORM_INTERFACE shows how to retrieve a document from BDS via class cl_bds_document_set.  However, I am not seeing a similiar program for ABAP Web Dynpro.
    I was hoping that WebDynpro test application IOS_TEST_SIMPLE_MS would do the trick; however that appears to only work for a MIME repository object.  Is there a way to display these documents through ABAP WebDynpro?  Can anyone point me to a sample program?  Thanks.
    John

    Hi John
    Have a look at this thread [     Approach content repository other way then URL approach  |Re: Approach content repository other way then URL approach;.
    Thomas Jung delivers some (as always) excellent answers to a very similar problem. If the document is in DMS or BDS really doesn't matter so if I were you I would follow the "cached response" path.
    Also, do a google-search for --  abap "cached response" -- and you will find some additional links here (Thomas has even more to offer...).
    If you do follow this path please share some details as a follow up in this thread for the benefit of the community at large.
    Regards, Johan

  • Page cannot be displayed(error in ABAP Webdynpro iview)

    Hi All ,
    I am trying to create ABAP Webdynpro iview. When i try to preview it...i am getting "Page cannot be displayed". I checked the Web AS connection and it is working fine. Please put on some light on this.
    Regards
    Rahul

    Hi Sharma,
    Better U check the  Iview parameters(Application name,and Namespace).
    Also check it out in deployed content.
    Regards
    Nandha.

  • Display Smartform Pdf output in ABAP Webdynpro application

    Hello,
    there is a solution for displaying Smartform output in Java Webdynpro application in this forum. Since i want to start an project in ABAP Webdynpro i need a solution for this technology since i don't want to recreate all the paperwork again using Adobe. Is there any solution available?
    Thanks
    Udo Ahle

    Hello,
    this is the solution which i was able to implement using the hints given by Heidi and Thomas. Thank you for the support. With this solution it is possible to reuse oldstyle sapscripts and smartforms in todays environment.  Here is the sample code which solves the problem:
    In WDA you define for example a pushbutton to start the display of the PDF.
    In the onaction method you implement:
    method ONACTIONSHOW_PDF .
      data LX_pdf type xstring.
    * get PDF from existing sapscript or smatform
      call function 'Y_PDF_GET' destination '46c'
        IMPORTING
          ex_PDF = LX_PDF.
    * append the pdf to the response
      cl_wd_runtime_services=>attach_file_to_response(
        i_filename  = 'Hello.PDF'
        i_content   = lx_pdf
        i_mime_type = 'application/pdf'
        i_in_new_window = 'X'
        i_inplace       = 'X' ).
    endmethod.
    The function 'Y_PDF_GET' is implemented as follows:
    FUNCTION Y_PDF_GET .
    *"*"Local interface:
    *"  EXPORTING
    *"     VALUE(EX_PDF) TYPE  XSTRING
    *"  TABLES
    *"      ET_OTF STRUCTURE  ITCOO OPTIONAL
      data: lf_filesize type i,
            lt_otf type table of ITCOO,
            lt_lines type table of tline,
            tline type tline.
    * start sapscript or smatforms and return
      perform make_otf.
      CALL FUNCTION 'READ_OTF_FROM_MEMORY'
        TABLES
          OTF                = lt_otf
       EXCEPTIONS
         MEMORY_EMPTY       = 1
         OTHERS             = 2
      et_otf[] = lt_otf.
      CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
         FORMAT                      = 'PDF'
    *   MAX_LINEWIDTH               = 132
    *   ARCHIVE_INDEX               = ' '
       IMPORTING
         BIN_FILESIZE                = lf_filesize
        TABLES
          OTF                         = lt_otf
          LINES                       = lt_lines
       EXCEPTIONS
         ERR_MAX_LINEWIDTH           = 1
         ERR_FORMAT                  = 2
         ERR_CONV_NOT_POSSIBLE       = 3
         OTHERS                      = 4
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * convert tline to xstring as needed in
    * in web dynpro            
      field-symbols <X>.
      data: st(268) type c.
      data l1 type i.
      data len type i.
      data maxline type i value 134.
      l1 = 0.
      loop AT lt_lines INTO tline.
        clear st.
        st+l1(maxline) = tline.
        len = maxline + l1.
        l1 = maxline - strlen( tline ).
        ASSIGN st TO <x> TYPE 'X'.
        CONCATENATE ex_pdf <x>(len) INTO ex_pdf.
      endloop.
    ENDFUNCTION.
    The make_otf for sapscript is the following:
    * the next attribute enables the otf output.
    * no other output will be generated
    <b>options-TDGETOTF = 'X'</b>
      CALL FUNCTION 'OPEN_FORM'
           EXPORTING
    *         APPLICATION        = 'TX'
    *         ARCHIVE_INDEX      = ARCHIVE_INDEX
             ARCHIVE_PARAMS     = ARCHIVE_PARAMS
                DEVICE             = DEVICE
                DIALOG             = ' '
                FORM               = FORM
                LANGUAGE           = language
               OPTIONS            = OPTIONS
    *     IMPORTING
    *          LANGUAGE           =
    *          NEW_ARCHIVE_PARAMS =
    *          RESULT             =
           EXCEPTIONS
                CANCELED           = 1
                DEVICE             = 2
                FORM               = 3
                OPTIONS            = 4
                UNCLOSED           = 5
                OTHERS             = 6.
    *... make some write forms
      data lT_OTF     type table of     ITCOO.
    * get the otf data
      CALL FUNCTION 'CLOSE_FORM'
    *     IMPORTING
    *          RESULT   = result
           TABLES
               OTFDATA  = lt_otf
           EXCEPTIONS
                UNOPENED = 1
                OTHERS   = 2.
    * put otf into memory for later usage
      if not lt_otf is initial.
        CALL FUNCTION 'SAVE_OTF_TO_MEMORY'
    * EXPORTING
    *   MEMORY_KEY       = 'DEF_OTF_MEMORY_KEY'
          TABLES
            OTF              = lt_otf.
      endif.
    For Smartforms technology it is possible to implement the same concept.

  • Display SAP's Business Worklplace with Abap WebDynpro

    Hi,
    is it possible to display SAP's Business Worklplace with Abap WebDynpro ?
    There is a  customer req. The person would like check his emails etc.
    Regards
    Alexander

    Hello,
    You cannot put SAP GUI applications/transactions into a web dynpro component.
    But you could build your own custom WD component. It isn't that hard to get the work items from your business workplace to be displayed in a custom application. Check the function modules GETINBOX (or there might be possibly something starting with SAP_WAPI* - SAP_WAPI-starting functions are the standard workflow API functions). Basically you just give for the function the user ID and it will return you the list of items the user is having in his business workplace. Then there are useful functions in SAP_WAPI* to for example display the work item description, etc.
    I am not sure how you can get the notifications (="emails") from business workplace, but I would imagine that there is some function you can use similarly and it shouldn't be that hard.
    Of course, if you have Portal, you should definately take UWL into account. With UWL you will already have a standard web-enabled workplace (it has basically all the same functionalitites as Business Workplace.) From UWL you can even launch the same SAP GUI transactions that you are currently launching from the tasks in workplace. It is purely an configuration issue.
    Regards,
    Karri

  • Display pdf into an abap webdynpro view: disable navigation

    Hello
    is it possible to disable the navigation panes and/or the toolbar and/or statusbar of acrobat reader inside your abap webdynpro application?
    When you specify for example #navbar=0 as parameter then you disable the navigation pane.
    Eg: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfb80249-0801-0010-3eaa-829afeac170f#navpanes=0 and https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfb80249-0801-0010-3eaa-829afeac170f
    Is it possible in an abap webdynpro with a interactive form element?
    Thanks
    Luc

    Hi Luc M,
    We can Disable the ToolBar of Interactive Form, this can be done by writing the Code in WDDOMODIFY Method of the respective View.
    Do add the Following the Lines of Code in the WDDOMODIFY Method
    DATA: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
               LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
    LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INTERACTIVE_FORM_UI_ELEMENT_NAME' ).
    LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
    LR_METHOD_HANDLER->set_hide_toolbars( abap_true ).
    ***With the above code you can only disable the ToolBar.
    Regards
    Pradeep Goli
    Edited by: Pradeep Goli on Mar 17, 2009 2:45 PM

  • SOFM: Dsiplay method is not working when called from ABAP Webdynpro

    Hi All,
    I want to open an attachment from ABAP Webdynpro.
    I have approached in this fashion:
    1) Get the attachments as SOFM object key
    2) On Click of a link on Webdynpro, I am calling a function module within which I am creating an instance of the SOFM object
    3) Then I am calling the DISPLAY method
    It is not opening.
    But, if it opens when I driectly execute the function module. It open when I directly test the business object.
    Any Idea ?
    Thanks & Regards,
    Deb

    Display Method uses the Dialogue Module, You should not access such methods in web dynpro which are SAPGUI specific.
    Web Dynpro Applications are run in Browser environment which cannot understand Dialog, it can understand only HTML.
    Read the attachments and get the content and use FileDownload UI element to show it to user.
    Abhi

  • Doubts in ABAP WebDynpro

    Hi Experts,
    I am new to ABAP WebDynpro and self-learning going through SDN stuff and other online-help. Please provide me
    your kind explanation on below doubts.
    1. When do we use GET_ATTRIBUTE and GET_STATIC_ATTRIBUTE
    2. How to read the index of a particular selected row in table?
    3. How do you change position of a particulr node dynamically?
    4. Is it possible to execute a component without a window?
    5. Is it possible to run a VIEW without embeding into a window in Webdynpro application?
    6. How to read the content entered in PARAMTER and SELECT-OPTION elements in ABAP Webdynpro? Can anybody pass code how to read entries?
    I mean GET_ATTRIBUTE or GET_STATIC_ATTRIBUTES is used for reading attribute value. 
    7. Is it possible to fix the Message window position? Show at the bottom of a screen? Please provide some code for this.
    8. Is it possible to change the color of a laber attached to a attribute dynamically? For example somefield is mandatory but you forgot to enter and press on u2018Continueu2019 then program should show that elementu2019s lable with redcolor text. Please provide me example code.
    Thanks in advance for the support and useful explanation!
    Regards,
    Meera.

    Hi
    Refer the answers inline
    1) When do we use GET_ATTRIBUTE and GET_STATIC_ATTRIBUTE
    GET_ATTRIBUTE
    Method to get the values of a context attribute.
    The prerequisite for this method is that the application knows the data type of the attribute.
    The value of the given attribute is copied to the export parameter. To do this the export parameter must have a data type to which a value can be written.
    GET_STATIC_ATTRIBUTES
    This method copies the static attributes to the transferred variable. If the structure is not identical, a move-correspondingis performed, which is not as efficient as a direct move, but is still useful in many cases.
    Static attributes are those that either have been declared or that belong to the structure with which the node was declared.
    2) How to read the index of a particular selected row in table?
    data: lr_element type ref to if_wd_context_element,
              lv_index type i.
      lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT'  ).
      lv_index = lr_element->get_index( ).
    3) How do you change position of a particulr node dynamically?
        Explain Bit deeply
    4) Is it possible to execute a component without a window?
        No it is not possible, actually the component view can be viewed by embedding it to the window
    5) Is it possible to run a VIEW without embeding into a window in Webdynpro application?
        No it is not possible, without window you cant run the view
    6) Is it possible to run a VIEW without embeding into a window in Webdynpro application?
      DATA LO_ND_MAIN_NODE TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA LO_EL_MAIN_NODE TYPE REF TO IF_WD_CONTEXT_ELEMENT.
      DATA LS_MAIN_NODE TYPE WD_THIS->ELEMENT_MAIN_NODE.
      DATA LV_INP_VALUE LIKE LS_MAIN_NODE-INP_VALUE.
    navigate from <CONTEXT> to <MAIN_NODE> via lead selection
      LO_ND_MAIN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = 'MAIN_NODE' ).
    get element via lead selection
      LO_EL_MAIN_NODE = LO_ND_MAIN_NODE->GET_ELEMENT(  ).
    get single attribute
      LO_EL_MAIN_NODE->GET_ATTRIBUTE(
        EXPORTING
          NAME =  `INPUT_VALUE`
        IMPORTING
          VALUE = LV_INP_VALUE ).
    7) Is it possible to fix the Message window position? Show at the bottom of a screen?
        Yes it is possible to show the messages by using the message area UI element in the needed position
    8. Is it possible to change the color of a laber attached to a attribute dynamically? For example somefield is mandatory but you      forgot to enter and press on u2018Continueu2019 then program should show that elementu2019s lable with redcolor text.
        Im working onit and let you know after i complete.
    Regards
    Arun.P

Maybe you are looking for