Cant hide or get rid of pre loader bar. Please help

[b]Ok why wont this work?
Trying to do a
Navigation bar button , to preloader to abour me page with a photo component.
Not on the pre loader page the bar works, only it wont disappear.[/b]
[pre]s[color=blue]iteLoader.loadMovie("AboutMe5.swf",4);
Frame_movie._alpha = 100;
loadingBar._alpha = 100;
loadingBar._xscale = 1;
loadingBar.onEnterFrame = function()
    kBytesLoaded = this._parent.siteLoader.getBytesLoaded() / 1024;
    kBytesTotal = this._parent.siteLoader.getBytesTotal() / 1024;
    percentage = Math.round(kBytesLoaded / kBytesTotal * 100);
    this._xscale = percentage;
if ("percentage" ==99) {
    loadingBar._alpha=0;
    Frame_movie._alpha=0;
        delete this.onEnterFrame;
[/color]
}[/pre]
[b]The nav bar has the following script[/b]
[pre][color=blue] Button_AboutMe.onRelease = function(){
unloadMovie(4);
loadMovie("AboutMe_Loader.swf",4);
}[/color][/pre]
[b]The loaded film used to just have as the script [/b]
[color=blue]stop();[/color]
[b]now I added this script to the final AboutMe5.swf file to try and hide the bar but does not work, also tried using different layers and the unloadMovie(4); script. It did not work.
[/b]
[pre][color=blue] unloadMovie(4);
loadingBar._alpha=25;
Frame_movie._alpha=25;
SiteLoader._alpha = 10
//    loadingBar._alpha=1;
//    this._alpha=1;
    //Frame_movie._alpha=1;[/color][/pre]
[b]Now Frame_move is a mov (and tried button) and the laoding bar is a mov file. I can make these fade by adusting the alpah but this only works accross the film. I cannot trigger it with the line.
[/b]
[color=blue][pre]if ("percentage" ==99) {[/pre][/color]
Ive tried with and without single and double quotes. and plane.
tried replacing percentage with
this._xscale
loading bar
Nothing works.
it appears to be the if script thats the problem not triggering the fad or gettig red of the pre loader altogether.
Please help

Now the above was a regualr download speed, ie just set to test movie. The below was 56k speed. Note when slowed you have an incremental section. Now this mirrors when the bar works . It tends to only workd with slow speeds on simulate download.
In neither case with a straight copy and paste of your script could a pre loading bar could be seen.
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 1
_level0.loadingBar 1
_level0.loadingBar 2
_level0.loadingBar 3
_level0.loadingBar 4
_level0.loadingBar 5
_level0.loadingBar 5
_level0.loadingBar 6
_level0.loadingBar 7
_level0.loadingBar 8
_level0.loadingBar 8
_level0.loadingBar 8
_level0.loadingBar 9
_level0.loadingBar 9
_level0.loadingBar 10
_level0.loadingBar 10
_level0.loadingBar 11
_level0.loadingBar 11
_level0.loadingBar 12
_level0.loadingBar 13
_level0.loadingBar 14
_level0.loadingBar 15
_level0.loadingBar 16
_level0.loadingBar 16
_level0.loadingBar 17
_level0.loadingBar 18
_level0.loadingBar 19
_level0.loadingBar 20
_level0.loadingBar 21
_level0.loadingBar 22
_level0.loadingBar 23
_level0.loadingBar 24
_level0.loadingBar 25
_level0.loadingBar 26
_level0.loadingBar 28
_level0.loadingBar 29
_level0.loadingBar 31
_level0.loadingBar 32
_level0.loadingBar 33
_level0.loadingBar 35
_level0.loadingBar 36
_level0.loadingBar 37
_level0.loadingBar 38
_level0.loadingBar 40
_level0.loadingBar 42
_level0.loadingBar 44
_level0.loadingBar 46
_level0.loadingBar 48
_level0.loadingBar 49
_level0.loadingBar 51
_level0.loadingBar 53
_level0.loadingBar 56
_level0.loadingBar 57
_level0.loadingBar 59
_level0.loadingBar 60
_level0.loadingBar 61
_level0.loadingBar 65
_level0.loadingBar 67
_level0.loadingBar 69
_level0.loadingBar 71
_level0.loadingBar 76
_level0.loadingBar 78
_level0.loadingBar 84
_level0.loadingBar 88
_level0.loadingBar 90
_level0.loadingBar 92
_level0.loadingBar 93
_level0.loadingBar 94
_level0.loadingBar 95
_level0.loadingBar 97
_level0.loadingBar 99
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100
_level0.loadingBar 100

Similar Messages

How to get rid of the loading bar in the start

Hello
I have a macbook pro retina 13"
my system is : yosemite 10.10.2
when I start my laptop there is a loading bar ? how can I get rid of it ?? I want to go into the desktop straight away ??
Thanks

It will help us to help you with your problem to know the exact model, size, year built, RAM installed and OS you're running. Does it have a SSD or a conventional drive?

I have used a pre-paid credit card and it wont let me buy things on the account even free stuff, when i try and download anything it says insufficient credit then it says update billing adress but i cant get rid of the credit card please help?

i would really like help fixing it because it still has a 25$ itunes card

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Recording audio can't get rid of fuz in background please help

so i have had my macpro for about 3 months i have been making hiphop songs flat out. my vocals have always been crystal clear im just using the inbuilt mic but yesterday i got a usb plug for my guitar i stuffed around playing guitar on gb for a few hours than i went back to finish one of my rap songs now wen i went to rcord my vocals there is like a fuz in the background it sounds so bad i cant even use it i have tried changing recording levels but it just wont go back to the quality it was before. i am really stuck and need an answer has anyone else had this problem i cant do anything until its sorted. thanks guys

jaronfromscarborough wrote:
its still doesnt make sence y its picking up more background noise s as well as the fuz. and y wasnt the fan working earlyer it just seems like it happened after running my guitar through garageband.
the fan is designed to ramp up and down based on how hot the computer is running. so if you just used the computer for work that ramped up the CPU, it would be running hotter and the fan would kick in. once the computer cools off, it throttles down.
jaronfromscarborough wrote:
im just a bit worried i dont want to go out and spend the money on new equipment for it not to work. is this problem common? thanks for your help so far mattimattmatt
understood! it's understandably frustrating that you buy a computer only to learn you have to buy MORE STUFF! just to do what you bought the computer for. the thing is, the built in microphone isn't really designed for music. it's like a phone microphone - useful for its tasks, but not something you'd expect to get a good recording through.
while it's frustrating to encounter the need to buy more stuff, on the other hand, when you realize you have a studio in your computer more sophisticated in some ways than what the Beatles were using, and all you have to buy is a microphone and maybe an interface... overall, it's still not a bad deal!
if all you need is a better microphone, you could buy a USB mic which isn't much and plugs directly into the USB port of the computer:
http://www.sweetwater.com/c981--USB_Microphones
here are some audio interfaces (you'd need to buy a mic separately, but you'd plug the mic and the guitar into the interface to get the sound into the computer, with the result that both would record in higher quality):
http://www.sweetwater.com/c695--USB_Audio_Interfaces/popular
(note that if you bought an interface, you would NOT buy a USB mic, since the interface would have the USB (or firewire) connection to the computer. you'd buy a standard mic, plug it into the interface, and plug the interface into the computer).
here's a new-ish combo USB mic, guitar interface that's pretty good:
http://www.apogeedigital.com/products/one.php
Also, please understand, while what I'm saying about the fan kicking in when you run the computer, and the value of using an external microphone and/or interface is true, since I'm not actually where you are, checking out your computer setup, there's no way for me to tell 100% what's going on. if you are happy with what you were doing, and suddenly started getting distortion, there's always the remote possibility that it's something else. what i'm suggesting is only the likely culprit from having encountered this before!
Finally, to understand how computer-based recording works, while the computer is the heart of your studio, and a contemporary computer has a lot of components stuffed into it out of the gate, for professional results, it's really just the start! A pro computer-based studio can use interfaces, microphones, and other outboard gear that can quickly run into the thousands of dollars, and then add some more zeroes!
good luck!

How do I get rid of this malware? Please help...

At least I think it's malware. I realized last night that there were an awful amount of ads, pop-up windows, and warnings coming from my normally visited sites. This only happens on Google Chrome (does not happen on Firefox and Safari) So I ran Sophos Anti-Virus software. It found two "threats" that I quickly cleaned up. No luck.
Someone in another thread said it is a variant of a "VSearch" trojan and suggested deleting bogus-looking daemons from my /Library/LaunchDaemons folder. I deleted "com.google.keystone.agent.plist" and "com.oracle.java.Java-Updater" (which seemed to help another user), restarted my computer and emptied the trash. No luck. Same results when I followed these instructions as well.
Can someone think of or suggest another way to get this taken care of?
Thank you in advance,
Robin
(OS X Yosemite 10.10.1, Mac Mini)

If removing Chrome extensions doesn't solve the problem, and if you're sure the ads are not just normal web content, then see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll and its using alot of space.how do i delete them?

Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll. One is called Photo Library, and the other is called iphone. It's using alot of space and I don't know how to delete them. Please HELP!!

those are photos that have been synced to your phone from your computer. plug in your phone to your computer, open itunes, select 'photos' tab from the top, and uncheck 'sync photos'
this will erase the photos from your phone that are not in the camera roll

How do i get rid of original loaded message on screen on l7680

how do I get rid of original loaded message on screen of my L7680

Hi...
pls do these steps to reset your printer back to factory defaults....
Hope this will work...
1. while the printer is on- unplug the power cord.
2. when the printer switched off- pls press and hold 3 and # key buttons while reconnecting the power cord back to the printer.
3.when you see a message " Improper shutdown" just press ok to continue
4.select your appropriate language and country to continue
5. wait the printer to initialize.
6. When you see the normal screen, reconnect the printer again back to the wireless network using the wireless set-up wizzard from the printer's control panel.
7. Try to print and scan wirelessly.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

The outgoing call icon has just appeared in the menu bar at the top of the screen on my iPhone 5 and i cant seem to get rid of it.

The outgoing call icon has just appeared in the menu bar at the top of the screen (next to the wifi icon) on my iPhone 5 and no matter what i do i cant seem to get rid of it.
I have rebooted and and cleared all running apps and still on luck.
The phone still works ok and i can make and receive calls.... any ideas on how to get rid of it?
Thanks

Here's what it looks like.
Mine did the same, just randomly overnight

I need to get rid of the load my iTunes library is putting on my laptop. Can I store music, vids, etc in iCloud and DELETE it from my pc?

I need to get rid of the load my iTunes library is putting on my laptop. Can I store music, vids, etc in iCloud and DELETE it from my pc?

Take a look at this: iTunes in the Cloud and iTunes Match Availability
http://support.apple.com/kb/HT5085?viewlocale=en_US&locale=en_US

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches long and I cant seem to get rid of them. Is my computer dying or being hacked

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches horizontally along the top and they cover half of the regualr bar (so half of the apple sign int he corner is covered) and I cant seem to get rid of them. Is my hardrive crashing or being hacked?

I have never seen DEVELOP on the menu bar for Safari, hence my query regarding testing.
What OS are you using and what version of Safari?
If you want to check your HDD, Open Disk Utilities>First Aid and run Verify and Repair.
The only remedy that I can think of that may work is an OS reinstall.
I seriously doubt that your MBP is being hacked.
Ciao.

In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, France

Ian
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes.

How to get rid of the Nav bar

I want to get rid of the Nav Bar which contains Prev, Next
Refresh and hide buttons. We can hide the buttons in that bar by
commenting writeToolBar(); in whskin_mbars.htm file. But still
unable to hide the complete bar. I am using RoboHelp 7 with WebHelp
Pro. Thanks.

I'm pretty sure that this is documented in Rick's Skinny on Skins:
http://www.robowizard.com/RoboWizard/NewProject.htm#Downloads/Skinny_on_Skins.htm
If not, try this: Go to whskin_frmset010.htm. Find the line that start with
strHTML+="<frameset rows=\"24,*\"
Replace the 24 by a 0.
Kind regards,
Willam

How do I get rid of the favorites bar listing on the left of my screen

How do I get rid of the favorites bar listing on the left of my screen when I can find it at the top of the screen? I takes up too much of my useable acreen

Hi Dale,
I don't use Safari much, but try this as I recall...
Click the Book icon in the Favorites/Bookmarks bar.

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Can I get rid of the flashing bar of words while texting? Or even writing this post?

Settings - general - keyboard - turn off predictive text.

How do I get rid of the contact bar on my FaceTime screen

How do I get rid of the contact bar off my FaceTime screen. I went to add a contact and the bar comes up. Now I can't figure out how to get it off my screen. I am tapping everywhere.

I just exit (completely) by tapping on the Home button. Of course, you can also add a contact from within Face Time by clicking on the plus sign.
Do you see any occasion where you need to view the entire screen other than during a call?

Cant hide or get rid of pre loader bar. Please help

Similar Messages

Maybe you are looking for