Cant login to admin tool

Hi all
I am using Oracle ultra searc on oracle 9i database
I followed all the intallation and post installations Instrustions and I made the user with the specified role
but always displaying wrong password/username
please somebody help me its very ergent
Mostafa Hashem

Hi
To login in the admin tool you have to enter a valid user/password of the database.
Try with WKSYS, if the database was correctly installed you should be able to login.
Did you check the DB-URL, e.g. in ultrasearch.properties.
Chris

Similar Messages

  • CE507-CDN - cant login using ADMIN/DEFAULT

    I have a CE507-CDN probably running 3.0.2 software.
    I wish to upgrade it to 4.1.3 ACDN but when it boots up at no point do I get an opportunity to stop the loading process.
    I seems to be loading Linux and not IOS, pressing keys does not do anything.
    Once it's finished booting I get a
    login: prompt NOT a Username: prompt.
    admin/default results in the word CISCO displayed and the words 'logins are disallowed'
    If I enter root/default I can get a root prompt but seem to be in Unix type CLI.
    I've tried all the software upgrade procedures and password recovery procedures but I don't get the boot sequece described on CCO.
    I found a web page which describes performing the upgrade manually using Unix commands but it didn't work.
    I've no CDM so can't run the wizard
    Can anyone help, I've got 7 of these to do
    Best Regards Tony

    Tony,
    Yes, I have seen this although it's been some time now. I just looked closer at you original note and see that you are running 3.0.2 RC something probably. Most of the time this would have required an additional CDM (Content Distribution Manager) whereby you would have upgraded through it.
    To get to ACNS 4.x, check out the following:
    http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns41/sysmnt/1888upg.htm#xtocid15
    An refer to the upgrading from 3.x to 4.x section.
    Regards
    Pete..

  • Cant login to admin Unable to authenticate

    I am trying to login to client site but receive the below error.
    Unable to authenticate due to a system error; please try again. Contact customer support if this error persists.

    Hi,
    We are currently aware of the issue as this has affected most of Adobe's services as well. 
    - http://status.businesscatalyst.com/
    Will update once fully resolved. 
    Kind regards,
    -Sidney

  • Acess Denied and No Admin tools and account

    In have somehow changed the security settings for users in network. I cant use any admin tools now it says 'access denied' and if i try logging onto my admin account it creates a temporary account.
    I even tried to change the settings under security but i am not allowed to make any changes to anything, keeps saying 'access denied'.
    Any solutions??
    Thank you

    Hi,
    According to your description, the command Get-ECPVirtualDirectory returns nothing. This may be the key point that you cannot access EAC. And I also recommend you check if there is ECP virtual directory in your default web site.
    And here is a similar thread you can refer to:
    http://social.technet.microsoft.com/Forums/en-US/0b4b870b-4c96-44a1-8503-2ec6fde6f052/no-ecp-after-installing-exchange-2013
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Admin tool: login.jsp

    When we access the admin tool login page login.jsp
    we only get an empty page (with just the body html tags)
    Nothing else.
    The jsp examples in our 9.2 database installation
    (not iAS) seem to work OK.
    We have made the post-installation tasks as described
    in "Installing the Ultra search Middle Tier ... "
    Thanks for any hints.
    Per Thernquist

    I have now found the cause of the problem.
    During the installation [in Linux Redhat 7.3]
    the file login.uix ends up the the folder
    $ORACLE_HOME/ultrasearch/webapp/isearch_admin/control
    where the login scripts doesn't find it.
    Moving login.uix to the folder
    $ORACLE_HOME/ultrasearch/webapp/isearch_admin/include
    makes things work OK.
    /Per
    Thanks for a prompt reply
    I have followed the configuration instructions in
    the Ultra Search Online Documentation/Part 1/
    Installing the U S Middle Tier Component .../
    Editing the ultrasearch.properties file
    The jserv.log says
    java.io.FileNotFoundException: Could not find login.uix
    login.uix does exist, in the folder
    <oracle home>/ultrasearch/webapp/isearch_admin/control alongside with i.a. login.jsp.

  • Restrict OBIEE developers to login into OBIEE admin tool withAdministrator

    I have developers with their own id's but with admin role assigned to them and If I remove the admin role from their id's they cannot login into OBIEE via admin tool in online mode to make any changes to the RPD.
    Q is) Developers make changes to the rpd file in online mode but at the same time I dont want them to have the admin privileges like making changes to the security/connection pool entries so on. But they can make changes to the presentation layer or business model. If I remove the administrator role from their id's they cannot even open the rpd in online mode i.e they can't even login. How do I give the developers the control they need and at the same time lock down the admin related stuff from changes?
    Also they cannot make the changes offline and they need to login and open the rpd online.

    Hi,
    I think you can resolve this issue, by setting up a different application role for all of your developers (yes, with BIAdministrator privileges too). However, in the .rpd you could restrict the access to this role to the physical layer. Briefly, the steps are below
    1. Set up a new application role.
    2. In the .rpd Manage Identity -> application roles -> New role -> Properties -> Permissions -> Object Permissions.
    3. Set 'No Access' to all of your physical layer objects.
    Hope this is what you are looking for.
    Thank you,
    Dhar

  • Ias problem in admin tool login.

    Hi,
    When i try to deploy a 9MB J2EE application on iAS6.0SP2, the process
    goes fine, but my iAS Admin tool doesnt work. It gives timeout error.
    But if the same application's size is cut down to 7MB, the admin tool
    works fine. Can you please suggest me the reason for this?
    Thanks and Regards.
    shivaram.

    Hi,
    That was a known bug in iAS-Sp2, which has been fixed in iAS-Sp3.
    Sanjeev.
    Super-User wrote:
    Hi,
    When i try to deploy a 9MB J2EE application on iAS6.0SP2, the process
    goes fine, but my iAS Admin tool doesnt work. It gives timeout error.
    But if the same application's size is cut down to 7MB, the admin tool
    works fine. Can you please suggest me the reason for this?
    Thanks and Regards.
    shivaram.

  • Tomcat 6 Admin Tools cant find it plz help

    hi guys am wokring on tomcat server 6 tool and when am trying to view my console admin it send me message
    says that:
    Tomcat's administration web application is no longer installed by default. Download and install the "admin" package to use it.
    i already searched for admin tool but i couldn`t find it so what should i do to start my admin console knowing that am working under netbeans 6 IDE
    thx.

    Admin is not available for Tomcat 6. See this link : http://archive.apache.org/dist/tomcat/tomcat-6/
    Also directory structure of 5.5 and 6 is different. Notice there is no server folder and under conf there is not subfolders (Catalina/localhost)
    -Mallesh

  • Open and connect in OBI 11.1.1.5 admin tool fowwoling OBE Upgrade

    I installed OBI11.1.1.5 on Redhat 5.2 and the admin tool on a windows. In this two machine I have OBI 10 server and admin tool installed as well. The OBI 11 components are all up running as I can access them such as EM and represention service.
    Following OBEhttp://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm?print=preview#t3 .I upgraded our 10g rpd and catalog and see the repository saved in instance_home, and verified that the default is RPD sh20110903_BI002.
    Next step in the OBE, I verify Reposiotory Metadata. I launched the admin tool, opened inline. In the generated dialog box, I entered the password in defined in the update script as Repository Password, and used weblogic login in User/Password. All other fields are blank. That is all I can do in the dialog box, but the Open buttone is always grey. I think at least one available repository should be listed in the list box at the bottom, but it was empty.
    Then I tried to create a new repository. In step 2 Select Data Source, I choose ODBC 3.5 and use a valid system DSN, but got Error : The connection has failed.
    I tried also use Connection Type OCI 10g/11g. IN the Data Source Name I used a valid netservice name defined in a Oracle client's Oracle_HOME. But still got Error : The connection has failed.
    Questions
    1) How can make the Open button active in the Open inline RPD dialog box?
    2) Why the valid System DSN failed to connect in 11g admin tool. It is OK in 10g admin tool and ODBC configure
    3) How to make Admin Too; sees the tnsnames definition. Should I copy the tnsnames.ora file to somewhere under Admin Tool installation directory?
    Many thanks.

    Thanks. The post appares make sense. I opened my user.sh file and has 2 questions:
    1) There are 32bit section and 64 bit section, and it states that 32 bit server must work with 32 bit client, so is for 64 bit. In my case, the clients are most likely 32 bit windows (browsers and admin tool), but the server is installed on Redhat 64 bit. Is this a problem? How do I know if my OBIEE iis running 64 or 32 bit?
    2) All entries in the user.sh file are commented out. Then what file is used to in the current OBI11, it is started automatically after the installation.

  • SSO between Portal Application and Portal Admin Tool

    Hi All,
    We have a requirement for implementing SSO between a Portal application and
    Portal admin tool.
    We are using WL Portal 8.1 SP4.
    Here is the reason for this requirement -
    A user logged-into Portal Application needs to login to Portal Admin tool to
    do some admin activity. We want to provide a link in the portal application
    using which the user can directly login to the Portal Admin tool without
    having to enter the credentials again.
    If someone has any info on how to implement this, can you please point me in
    the right direction.
    Thanks,
    ~Deepak

    Hi,
    When creating PP you have 2 options
    PP used for compiling and PP used for Building
    You create PP with all the libraries into Developing/Compiling Other DCs
    And another PP with all the libraries into can be packaged into other build results (SDAs).
    Once you have these 2 PP in place you add the DC as used DC.
    And this should resolve the issue.
    Hope this helps.
    Cheers-
    Pramod

  • Unable to start admin tool

    Hi,
    I am newbie to portal.
    I have installed weblogic 6.1(sp1) & weblogic portal 4.0. I was unable to start due
    to license error. I executed updatelicense.cmd. I can start portal with system/weblogic
    password. I am not able to logic in to admin tool with system/weblogic. What is wrong.
    Any help is appreciated.
    Environment is windows2000.

    André is right.
    Something I find useful if you are like me and keep forgetting
    what user/password and URLs to use, you might want to consider
    pointing your browser to the default page for the server: http://localhost:7501
    This will forward to the welcome-page of the default web appp and
    the page provides links to the differents tools and samples. It also
    has a reminder of the username/password combinations on the left hand side.
    Michel.
    "André Pönisch" <[email protected]> wrote in message news:[email protected]..
    Hi,
    the admin-login is after the installation "administrator" and "password".
    André
    [email protected]
    www.AP-Home.de

  • JAZN Admin tool - what username and password??

    I need to use the JAZN Admin tool that comes with JDeveloper to configure security for the embedded OC4J. I have specified JAAS as the policy provider by adding the following lines to jre/lib/security/java.security:
    auth.policy.provider=oracle.security.jazn.spi.PolicyProvider
    login.configuration.provider=oracle.security.jazn.spi.LoginConfigProvider
    However, I don't know what user name and password to specify when attempting to invoke a JAZN command, such as "java -jar jazn.jar -listusers". What is the default username & password that is included in the JDeveloper 10g installation? Or do I have to manually configure a username/password? If so how?
    Thanks in advance!
    Steve

    See https://forums.adobe.com/thread/1619850

  • Cannot Connect to new Installation with Admin Tool

    Have installed BPC 7.5 SP4 Patch 4 on Windows 2008 64-bit.  App/Web Server on one machine, SQL Server 2008 on 2nd machine,
    Everything seems fine except access via servername - servername used in all the settings.
    When trying to access the Administration to start installing new appsets, connect using ip address in admin tool and login using the software install user but will not verify user name/password.
    Does anyone have any idea of the issue?
    thanks
    Lesley

    In that case, I'd suggest you make sure both ethernet ports are unplugged from the RAID, power it off and on, plug a cable directly from a laptop to the RAID, set the IP of your laptop to 169.264.11.11 with subnet mask 255.255.0.0, then do "ping 255.255.255.255" and you should see a response from the IP address used by the RAID.
    This question is very common here... there are other threads where I've answered this so I won't clarify further here.

  • J2EE Admin Tool

    Hi all1 i'm working with J2EE Engine version 6.30 but its installed on a remote server, and i want to acces with the J2EE admin tool from mi pc, i have the J2EE admin 6.40 and when i'm trying to connect to the J2EE Engine 1rs gives a wraning: 'Warning: J2EE Engine kernel version is older than the version of Visual Administrator' then it continues with the logon and gives me the following error:
    'Error while connecting
    com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.Nested exception is:
         java.io.InvalidClassException: com.sap.engine.services.adminadapter.descriptor.ClusterDescriptor; local class incompatible: stream classdesc serialVersionUID = -1045741131628563809, local class serialVersionUID = -7364664042028052650'
    I guess it happens because of the version, i dont know.
    If so, i wanna know if i can download the J2EE Admin Tool or if somebody can give it to me.
    thx
    rgds.
    Gregory

    Hi Ivaylo! thx.
    I did just what u are saying to me, and when i'm trying to connect from my local pc to the remote server the logon stops in 99% and in the task running appears the following message:
    'Login to Sapcfd.spo.com
    Host : Sapcfd.spo.com
    User name : G.MAYORGA
    Port : 56004
    Layer : None
    Successful !
    I hope u can help me.
    thx n rgds.
    Gregory

  • OBIEE 11.1.1.7, Win 8, Admin tool not opening.

    Dear Experts,
    I have recently installed OBIEE 11.1.1.7, on windows 8, 64bit, I3 processor and 6 GB ram configuration.
    Installation is successfull, i can login all console,em, answers etc.
    Only issue is Administration tool to manage to RPD is not opening. It just pops up the CMD windows and then stays there at it is.
    No further progress after that.
    Could you please let me know, since it's in my home laptop, can i install OBIEE client separately in the same machine in which server is installed?
    the whole installation seems to be useless if i can't edit RPDs.
    thanks.

    I did a deinstall, and installed whole OBIEE 11.1.1.7 again. This i time noticed while installing it i had to run the installation wizard in compatibility mode.
    And the windows version this wizard was comfortable was windows XP.
    Also during installing it, at one of the initial stage it showed an error of operating system certification but i opted to ignore and continue with the installation.
    It went through all the configuration steps too.
    but again not able to find how to load Admin tool. I know for sure there is one condition in which the tool loads and works fine but not sure what is that.
    any help will be greatly appreciated.
    thanks.

Maybe you are looking for