Cant send mms messages. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones.

I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!

Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Formatting MDX report,Error=One or more axes in MDX query have been skipped

Hi All
Need to show the measures on row-ways instead of Column-ways in MDX report. Able to generate report with measures Column-ways.
Getting error when tried the following:
#) when used "{} On Rows" instead of "{} On COlumns".
ERROR - 1200545 - One or more axes in MDX query have been skipped.
ERROR - 1241101 - Unexpected Essbase error 1200545.
If anyone faced something like this before, please share some work-around.
Thanks & Regards
sharma

Hi,
Take a look at this SAP Note: 1580524 - Xcelsius Dashboard does not display variable popup
Also go through the below discussion, it may help you.
Bex Variable PopUp does not come up launching Xcelsius dashboard
One or more mandatory variables of query XXX no... | SCN
Bex Variable PopUp does not come up launching Xcelsius dashboard
BICS - Passing Mandatory Filter Variable value to a BEx Query
Passing parameters between XCelsius dashboards using BI direct connection
Hope this helps brother.
Regards,
Suman T

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I can no longer get radio streams on my Apple TV. I get a message saying that an error occurred and to please check again. I have been using them for months successfully. Any suggestions?

I can no longer receive the audio streams under "computer" on my Apple TV. Instead I get an error message and suggesting I try again. This is true for all of the stations. Any suggestions how to address this?

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

When I try to update I get a message that says "an error has occurred" and I cannot update like I have been doing for several years

When I attempt to upgrade I am now getting a message that says "an error has occurred" and I cannot activate the upgrades----there are two pending

Disable anti virus software if installed
Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

I keep getting different errors when i try to upgrade why? i have been 5 hours trying to figure out this ? im soo freaked

help please.
im on firmwere 4.3.5 im trying to go up to 5.0...

Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it. Your problems may be caused by the installation of the version of DirectX you installed. Uninstall the one you installed and see if you
still have the errors.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Service_doctor.sql -- There are errors in one or more PL/SQL package

Hi,
Script service_doctor.sql is run through repository owner. It is giving following error message.
There are errors in one or more PL/SQL packages and functionPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
Please guide me what can be done to solve the error.
Thank you in advance.
Amit Shah.

Hi Amit,
I am facing this error every time I run the service_doctor.sql. After that once I have executed this script -- select * from user_errors -- to see what possibly could be wrong. It returned me one procedure name -- WB_OLAP_LOAD_DIMENSION_GENUK. But I was not very sure what to do with this.
Now also I am getting the same error --- >>>>>> There are errors in one or more PL/SQL packages and function. But it didn't stop me from doing anything in OWB / Process flow / Workflow environment and I can work fine.
Just wanted to share this with you. However, the result that you are getting shows (>>>>>> The platform service is not available) that Control center service is not up. Please execute the start_service.sql and after that it you run service_doctor again, you'll get only the first error -- >>>>>> There are errors in one or more PL/SQL packages and function --- but that shouldn't stop you from doing anything in OWB.
If anyone knows what causes the --- >>>>>> There are errors in one or more PL/SQL packages and function -- error, and what are the implications of this in OWB environment, and what is the solution to it, please do share.
Cheers,
Swagata

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

When I try to send an email message I get smtp error(535) Authentication failed

I use the email from Stevens Inst. of Tech. I can receive messages,but when I try to send one I get the message: SMTP Error (535) Authentication failed. When I try the same thing in Chrome, I have no problem.

Contact your e-mail provider.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
I looked up the error on a search engine.
http://www.bing.com/search?q=SMTP%20Error%20%28535%29
Check that you are using the correct user / password.

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. H

Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
              ^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
               ^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
                     ^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
                                             ^

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Cant send mms messages. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones.

Similar Messages

Maybe you are looking for