Canvas disappear on sending multiple requests specifically from IE 11

I have a page which displays few javascript charts on it. I am using RGraph chart API to generate charts. The charts are been generated from a separate Ajax call.
The page is working fine with IE 7, 8, 9 and 10. Then recently I have upgraded to IE 11. After upgrade the page is not working as intended. On performing refresh operation for about 3-4 times, section of some charts are been disappers. It displays blank
section instead of chart. And random charts gets disapper. It is not fix that some specific charts will fade away.
And when this issue occur, all the CSS on the page goes messy.
I have checked for any javascript related error generated or not. But I didn't found any javascript error on the console.
I have checked from development tool. The canvas tag is available, bit it does not display on the page. It shows a blank section instead.
Any idea why this is happening?
I have moved this question from IE 11 Community Support Forum. Here is the link of the forum.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/canvas-disappear-on-sending-multiple-requests/c433cf9b-fb82-48f1-8554-ebb3354795fe
Hi,
In order to get your issue solved more efficiently, I would recommend you post another thread in
https://forums.asp.net forum to get dedicated supports, since based on your description, you are having this issue with your web applications and that forum is for web development issues.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Error when sending multiple request at same time

When we send multiple request at the same time, we get an error.
Same scenario
XIServer:AE_DETAILS_GET_ERROR:Error while reading from the secure store:
ERROR_U: No service user password found for Adapter Engine
The first request is processed OK, it's the second one that gives the error...
Anybody any ideas?

Check out the below thread : Re: No service user password found for Adapter Engine
May be some of the solution from the thread will work for you.
Thanks,
Pooja Pandey

Sending multiple request approval at one time

Hi,
Im working on a senario thats sending multiple request approvel at one time with HWC application. For example , client approves one request and it approves multiple requests at one time as well. Is it possible make this with HWC ?
Thanks in advance.

If you have a list key, it'll have child MessageValueCollection keys (specifically, the value of that list key will be an array of MessageValueCollection objects). Each MessageValueCollection has a state, "add", "update", "delete" or empty. By specifying mappings between list key actions and MBO operations, or by doing so manually in the WorkflowClient.xml, you can specify which MBO operation will be invoked for each "add" MessageValueCollection, which MBO operation will be invoked for each "update" MessageValueCollection and each "delete" MessageValueCollection when the message is submitted to the server via an Online Request or Submit Workflow, where it will loop through the MessageValueCollections and execute the appropriate MBO operation for each.
In the tooling, you can do this by having a listview bound to that list key and having subsequent screens that invoke Add/Update/Delete List Key Collection menuitems. In that scenario, when you update the rows in the listview, the effects don't occur immediately, but rather wait until you submit them as a batched operation, which will behave as described above.

Is it possible to send multiple PDF attachments from an iPad?

When sending an email from my iPad, I am unable to send multiple attachments, just one file at a time.
Is there any way to send two PDF files in one email?
Thanks,
Melissa.

I don't need to send it to multiple contacts, I need to send multiple PDF files in an email from my iPad.
Thanks for the assistance though.
Regards,
Melissa.

Web service sends multiple requests after flash upgrade

I have a Xcelsius engage 2008 SP3 FP2 and i just found out that my dashboard send multiple reqests to web service and this will render my dashboard useless. This is a major bug, is there any solution? Service methods will get around 2-20 request and the dashboard will not be usable any more. Triggers are correct and will not trigger web service unless button is clicked.

Dear Expert,
Tcode RZ10
set the parameter rdisp/gui_auto_logout = 30M in all Instance profiles / orwhat ever time limit u want to specify.
See that this parameter is set on each server.
And you can make it a default.
Regards,
Shankar K B
Edited by: Shankar.kb on Feb 19, 2012 2:25 AM

How To Send Multiple Spool Lists from a Single Step in SM37

We have converted all of our output reports to ALV and now instead of one big spool that contains all the reports generated in a single step we now have multiple spools. We run the program as a Batch Job in SM37 and have created an entry in the SPOOL LIST RECIPIENT for the job. The problem is that it only sends one of our lists. Is there a way to make it send all of the ists?

You need to write areport program with fm 'RSPO_RETURN_ABAP_SPOOLJOB' and collect all spools and send it and make this as precedent job after your ALV spool jobs
a®

Sending and requesting parameter from IP IP GW to RADIUS

Hello all
i am new to IP IP gw and RADIUS. i have some doubts regarding the interaction between IP IP gw and RADIUS.
if i wish to send some parameters like h323 billing-model on access accept message how i do this. similarly sending the credit time and credit amount
i am using TCL 2.0 and free radius 1.1
Thanks in advance
Vignesh

try this link for more information on h323 gatekeepar configuration
http://www.cisco.com/warp/public/788/voip/gk-call-routing.html
http://www.cisco.com/warp/public/788/voip/understand-gatekeepers.html

Is there a way to send multiple pdf's in one email from iBooks? I have several that I've saved that I need to send to one person. If it can't be done directly, is there a work around?

Is there a way to send multiple PDF documents from iBooks in one email? I have several that need to be sent to one person and can't figure out how to send more than one at a time. If you can't, is there a workaround?

Warehouse that PDF on your own server, then link to it from your book.
Ken

Firefox is trying to send strange multiple requests on port 7070. As I allow the request nothing appears in "http headers" addon window. What could this be?

Hi.
I discovered my Firefox v26 was SOMETIMES trying to send multiple requests on port 7070 (ukrainian ip-address) independently on what websites were opened at the moment.
The problem remains after v27 update.
I have an addon "live http headers" installed.
As I manually allow the request by firewall nothing appears in the headers window.
Does my firefox seem to be modified with adware/spyware?

Have you tried Opening your Firefox in Safe Mode
[[Troubleshoot Firefox issues using Safe Mode]]
please report back to us

How to retain socket connection for multiple requests in java 1.3

Hi All,
My problem is to retain client socket connection without opening and closing socket connection for every request.I want to open the socket connection once and send multiple requests one after the other based upon the response over the same socket.Finally I want to close the socket only after completing all my requests and receiving respective responses.I don't want to open and close the socket for each request and response.While at the same time I expect the socket to send each request only after receiving the response for the previous request.
I am using java 1.3 and I am looking for the solution in same version.
Please help me .
Thanx in advance.

Look at my response to "Telnet to Unix box from Java"
http://forum.java.sun.com/thread.jsp?forum=31&thread=437231
on "Java Programming" forum. It does exactly that to run the signon and a command. It would be easy to extend it to do multiple commands.

Error with multiple requests

Hi,
I'm using JSC2_1. I've developed page with table bound to database table via data provider. There are about 1000 rows in database table so my table component has pagination buttons (about 100 pages).
My problem is that when user clicks pagination buttons quickly (before response is sent) then server fails with error 500. I think that multiple request threads are being launched and they all access CachedRowSet in the same time. According to http://blogs.sun.com/jfbrown/entry/cachedrowsetdataprovider_and_cachedrowset_info CachedRowSet is not thread safe.
Is there any way to block user from sending multiple requests? Another solution would be locking the rowset but I don't know how to do this.
regards
Grzegorz

OK then I doubt Bios is the issue. I had to check though.
I run the same software as you do for that wheel however I have Windows 2k SP4. While I doubt the underlying OS is the issue I did ask as it may have been a Service Pack Issue. As you have a current version then I can only assume that is OK.
Which Via drivers are you using? If they are a Hyperion driver set from Via there are issues with some of their versions. Try updating with the Via 3in1's that came on the MB Driver CD you got with the board.
Otherwise this may be an issue best asked of Logitech as well as I have no idea what their error reporting is trying to tell us. No I am not saying it is the wheel. I am saying we may get a better handle by knowing what that error code is trying to say is all.
Oh ya. Make sure also in Bios that you turn on Legacy Devices. I have that on with mine as well. I did not try the wheel without it but it could be an issue although a remote one. It is something to make sure of though.
Also if your using an external USB hub try the wheel directly into the computer rather than through the hub.
Also if you have a memory card reader or other USB devices try the wheel with them unplugged just to make sure there are no conflicts.
I am off to sleep but let me know and I will try to help more tommorow if that doesn't help.

Multiple requests in a single HttpConnection

this is the point,
I would like to make a while that sends multiple requests, but with just one HttpConnection.
something like this:
import java.io.DataInputStream;
import java.io.DataOutputStream;
import java.io.IOException;
import javax.microedition.io.Connector;
import javax.microedition.io.HttpConnection;
public class Ping extends Thread {
    String url;
    HttpConnection conn = null;
    DataInputStream hdin = null;
    DataOutputStream hdout = null;
    public Ping(String url) {
        this.url = url;
    public void openConnection() {
        try {
            conn = (HttpConnection) Connector.open(url);
            conn.setRequestMethod(HttpConnection.POST);
        } catch(Exception e) {
            e.printStackTrace();
    public void efetuaConsulta() {
       int counter = 0;
       try {
            if(null == conn)
                openConnection();
            while(counter <= 10) {
                hdout = conn.openDataOutputStream();
                hdout.writeInt(counter);
                hdout.flush();
                hdout.close();
                hdin = conn.openDataInputStream();
                counter = hdin.readInt() + 1;
                hdin.close();
                System.out.println("--> "+counter);
        } catch(Exception e) {
            e.printStackTrace();
    public void run() {
        efetuaConsulta();
}well, this the idea, but its not working....
this class would send an incremented int every request to my servlet,
in another project, my servlet would do something....
but this is not working because it says my DataOutputStream is already opened.
I tried to do a singleton too, but it doesnt work....
someone knows how to do it?
I know it's possible because midp1.0 supports HTTP1.1
and HTTP1.1 support what Im trying to do here....

Http 1.1 is not supported. You could implement that yourself...
try to move the openconnection into the while loop. that should work

How biztalk handle multiple request at a time ?

can TCP/IP adapter or biztalk handles multiple request at a time ?
If yes,then how it process multiple request ?
Can TCP/IP send ports sends multiple request ?
Prakash

Yes.
It processes multiple requests using THREADS. Each Connect starts off a thread that handles the receipt of the message, submission to BizTalk, wait for the response (matching two-way subscription) and then respond back to the client.
TCP/IP Send ports handle multiple requests by creating fresh sockets (RPC High-end ports). As an example, in your browser you open multiple tabs and access different sites, each tab results in your browser opening a fresh socket connection for the request.
Regards.

Client request / response from a specific jpd instance

Hi all,
I have a business process whose instances are long running and need to be
individually accessed by multiple clients (mostly pageflow controllers on
numerous portlets).
How can I possibly target a client receive/send call to/from a specific
instance of a business process (not a specific JPD class, rather a specific
INSTANCE of a JPD that is already running and has not necesarily need
started by the current pageflow controller etc.)???
This seems like a pretty fundamental requirement - I'd hate to have to use
message brokers and message filter for all interchanges. Is that my only
option?
I looked into dynamic binding, but that seems to be a method for dynamically
selecting between multiple JPD classes - and not running instances of those
classes.
cheers,
Markus

Where is this getInstanceId() method. This does not seem to be a method of ProcessDefinition.
I can only see the getConversationId() and setConversationId() methods. The getConversationId()
method returns null.
"Markus Blumrich" <[email protected]> wrote:
This helps immensely - thank you for taking the time to post.
Really I think BEA should address this rather basic scenario in a more
developer friendly way - and if they have, then publish a how-to.
cheers,
Markus
"Yueming Xu" <[email protected]> wrote in message
news:[email protected]...
We had the same request, and I figured it out the hard way. The solutionis actually
pretty simple.
(1) When the JPD processes the initial request, it should usegetInstanceId()
to get the conversation ID and store it somewhere the client app canfind
(e.g.,
in an Entity bean), or return it to your client, and manage it at theclient.
(2) At a later time, client app may retrieve the conversation ID, andthen
send
follow-up requests to the JPD instance (which is actually an Entitybean
whose
primary key is the conversation ID).
(3) To send a request to a specific JPD instance using a process control,you
need to first call setConversationID(), and then call the request method.
Hope this helps.
Yueming
"Markus Blumrich" <[email protected]> wrote:
Hi all,
I have a business process whose instances are long running and need
to
be
individually accessed by multiple clients (mostly pageflow controllers
on
numerous portlets).
How can I possibly target a client receive/send call to/from a specific
instance of a business process (not a specific JPD class, rather aspecific
INSTANCE of a JPD that is already running and has not necesarily need
started by the current pageflow controller etc.)???
This seems like a pretty fundamental requirement - I'd hate to haveto
use
message brokers and message filter for all interchanges. Is that myonly
option?
I looked into dynamic binding, but that seems to be a method fordynamically
selecting between multiple JPD classes - and not running instancesof
those
classes.
cheers,
Markus

Handling Multiple requests in SOAP Sender Adapter

Hi All,
We are working on scenario SOAP-IDOC.
We receive multiple requests from Source, PI should process them and deliver it to SAP system.
Now the issue is :
The messages are in separate SOAP requests i.e. 5 messages = 5 SOAP requests.
If sending a single message there is no issue.
If sending multiple messages at once then a time-out occurs.(HTTP 408 Timeout) If sending
5 SOAP requests in the same transmission then the first message will process ok but the other 4 will report an error. If the 5 SOAP requests are transmitted individually then they process ok.
Can any one throw some pointers on this? What are the settings I have to do in PI so that sender can avoid getting HTTP 408 timeout error?
Regards,
Srini

Hi Srinivasa,
Set icm/server_port_X parameter . You can change this in RZ10 .Goto tcode RZ10 select the instance profile and select the extended maintenance and click on Change Now click on Create Parameter Tab and write the profile parameter icm/server_port_X and press enter it will show you the default value if any and then put the new value and click on save and F3 and then again save.System needs to be restarted to reflect these changes.
Also check out the SOAP adapter FAQ on service market place. This would surely solve your problem(time out).
Rgds
joel

Canvas disappear on sending multiple requests specifically from IE 11

Similar Messages

Maybe you are looking for