How To Send Multiple Spool Lists from a Single Step in SM37

We have converted all of our output reports to ALV and now instead of one big spool that contains all the reports generated in a single step we now have multiple spools. We run the program as a Batch Job in SM37 and have created an entry in the SPOOL LIST RECIPIENT for the job. The problem is that it only sends one of our lists. Is there a way to make it send all of the ists?

You need to write areport program with fm 'RSPO_RETURN_ABAP_SPOOLJOB' and collect all spools and send it and make this as precedent job after your ALV spool jobs
a®

Similar Messages

How to send multiple midi channels to a single Kontakt Player?

I can send any channel to a Kontakt Player. But only 1 channel at a time. When I have 2 tracks dedicated a single Kontakt Player how do I assign them to different channels so that the Kontakt player responds multi-timbrally?
I can't believe that I cannot figure this out. It's a little embarrasing.

create multiple tracks that use same instrument. After you create your 1st software instrument track you can create more tracks that use that same instrument, from the track menu. Select, "New with same channel strip/instrument. you can create as many as you like.
But since they are using the same channel strip, you will have to mute and un-mute differently because muting one mutes all, so instead of muting the track itself, mute the region on a track using the mute tool.

How to run multiple DOS commands from a single Webutil Client_Host session?

Hello all,
I have a requirement where I need to create an interface with SVN from Forms for basic checkin-checkout of files.
So, I've been trying to use webutil client_host to open a command line session and issue svn commands.
For svn, sometimes I need to give multiple commands like change to a particular directory and then run an svn command.
But client_host takes in only one command at a time and I'm unable to issue a series of DOS commands to perform
a particular task.
Is there a way to do this?
Pls suggest.
Regards,
Sam

First your original question... You can put more than one DOS command on a single line, simply separate each command with an ampersand (&). For example:
mkdir c:\abc & cd abc & dir*
Regarding your concerns about performance, well that would depend on exactly what you mean. Using CLIENT_HOST (or HOST on the server) simply opens a shell (DOS in this case) then passes your command to it. The performance of performing this action really isn't measurable. Basically you are just pressing a button and you should get a near immediate action. As for the performance of executing each command, that has nothing to do with Forms. Once the command is passed to the shell, the rest is a function of the shell and whatever command you passed.
Having said that, if you were to write something sloppy like a loop (in pl/sql) which called CLIENT_HOST lots of times repeatedly, then yes there would be a performance problem because the pushing of the button will cause an exchange to and from the server and each cycle in the loop will do the same.
So the answer to how performance is impacted will depend on what exactly you need to accomplish. If it is a single call to CLIENT_HOST, this should be fine.

How to expande multiple table row from a single button

I am trying to create an expanding table that expands multiple rows when a single button is clicked.
So far I have managed to create a table that expands a single row at a time using -
click
this.parent.parent.instanceManager.insertInstance();
I also tried using the following code from an existing woking file that adds a column when a button is clicked -
Table1.HeaderRow._Col3SF.addInstance(0);
Table1.Row1._Col3SF.addInstance(0);
Table1.Row2._Col3SF.addInstance(0);
Table1.Row3._Col3SF.addInstance(0);
I adapted the code to suite my own file -
click
form1.Sub1.Sub3.Table1.Row1.addInstance(0);
form1.Sub1.Sub3.Table1.Row2.addInstance(0);
form1.Sub1.Sub3.Table1.Row3.addInstance(0);
form1.Sub1.Sub3.Table1.Row4.addInstance(0);
form1.Sub1.Sub3.Table1.Row5.addInstance(0);
However I receive the following error -
click Invalid property get operation; subform doesn't have property 'addInstance'
Regards Maxwell

I managed to acheive what I needed to do using LCD's Action Builder.
The Action builder makes it so easy to create advanced content.
I selected my button obect for the list, then chose - create add a new instance,
then chose my table from the list.
I now have a table with multiple rows that expand when a single button is clicked, fantastic!
Regards Maxwell

How to create multiple WIP jobs from a single Sales Order Line

Hi all,
I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
Thanks in advance!
Regards!

Assuming simplest of scenarios....
In case of changes to Sales order qty, an unplanned order will simply disappear.
If a wip job has already been created, you will get a cancel message (in case the job is not needed) or a reschedule out message (if the quantity needs to be reduced).
ASCP will give you a reschedule in /out message if the dates change.
Sandeep Gandhi

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

How to Send Multiple Plot XY Graph from LabVIEW to Microsoft Excel

The link below describes exactly what I would like to do, however the link to the solution/work around does not work.
Has anyone got an alternative solution?
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E

Please check the link again as it seems to be working fine now.
How to Send Multiple Plot XY Graphs from LabVIEW to Microsoft Excel:
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E
The standard Excel Insert Graph.vi cannot insert multiple XY Graphs to Microsoft Excel, so you will need to use the Report Generation Toolkit for Microsoft Office. You will find a link to an example program at the bottom of the page. I have also attached it below.
Attachments:
example.zip ‏35 KB

How do i send a contact list from address book to another person via email?

how do i send a contact list from address book to another person via email?

And your destination user uses a mac?
Click on the group name.
Go to the menu File > Export VCard . . .
Save that file and send it.
The recipient should go to File > Import to import your list.
MtD

How to stop sending spool list of a particular step in a batch job to the Distribution list

Hi All
I have a Batch job with three steps ( Three programs) which will be sending Spool list for all the 3 steps to the assigned distribution list
My user requirement is he want only the spool list for the 3rd step only (Exclude 1st and 2nd)

Hi,
you can consult your Basis consultant and also check few settings in T.code-SPAD

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path      LIKE rlgrap OCCURS 0 WITH HEADER LINE,
        lt_index    TYPE sy-tabix,
        doc_type(3) TYPE c,
        descr       LIKE it_objpack_basis-obj_descr,
        temp_data   LIKE w_path,
        temp1       TYPE string,
        tab_lines   TYPE i,
        langu(15)   TYPE c,
        expirydate TYPE so_obj_edt,
        L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
              'not logged on for 180 days for client' sy-mandt
              INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
   ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num   = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num   = w_tab_line.
it_objpack_basis-doc_type   = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
    temp1 = w_path.
    descr = w_path.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '\'
        string    = descr
      IMPORTING
        head      = descr
        tail      = temp_data.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '.'
        string    = descr
      IMPORTING
        head      = temp_data
        tail      = doc_type.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename      = temp1
        filetype      = 'BIN'
        header_length = 0
        read_by_line = 'X'
        replacement   = '#'
      TABLES
        data_tab      = it_upload.
    DESCRIBE TABLE it_upload LINES tab_lines.
    DESCRIBE TABLE it_objbin_basis LINES lt_index.
    lt_index = lt_index + 1.
    LOOP AT it_upload.
      wa_objbin_basis-line = it_upload-line.
      APPEND wa_objbin_basis TO it_objbin_basis.
      CLEAR wa_objbin_basis.
    ENDLOOP.
    it_objpack_basis-transf_bin = 'X'.
    it_objpack_basis-head_start = 0.
    it_objpack_basis-head_num   = 0.
    it_objpack_basis-body_start = lt_index.
    it_objpack_basis-body_num   = tab_lines.
    it_objpack_basis-doc_type   = doc_type.
    it_objpack_basis-obj_descr = descr.
    it_objpack_basis-doc_size   = tab_lines * 255.
    APPEND it_objpack_basis.
    CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack_basis
      contents_txt               = it_objtxt_basis
      contents_bin               = it_objbin_basis
      receivers                  = it_reclist_basis
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc EQ 0.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM.                    " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to send multiple material in our own message type

Dear All,
Any idea about how to send multiple material in our own message type,In my outbound i have created a message type but able to send only one material through program. If i give range of material its in error status 26 in WE02 and failed to send.
Help me ASAP.
Thanks & Regards,
Arun.

hi Gordon,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun
Edited by: Arun Kumaran on Aug 22, 2008 3:33 PM

Can any body tell me, how to send/receive the sms from java application

Hi All,
Can any body tell me, how to send/receive the sms from java application to mobile phones.
I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
the following error.
Cannot connect to GSM Device, error : -11

The best place to ask your question is at the JSMS website, forum or mailing list since this is no error that directly comes from a class belonging to the core Java classes.

How do I recover contact list from my Iphone 4?

How do I recover contact list from my Iphone 4 if I do not have ICloud and do not have the ITunes sync installed/

If you don't have backups, theres really not much that can be done other than to have everyone you know send you their numbers/emails again.
Also, backup your contacts twice from now on. Use iCloud and Lookout Mobile Security.
Make regular iPhone backups to keep this from happening again.

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

How To Send Multiple Spool Lists from a Single Step in SM37

Similar Messages

Maybe you are looking for